The ICS Linker IIa will select the memory from DTMF in a radio. So if you want memory number 6 or 32 you just tell the controller to select that memory and the Linker IIa will select that memory in the radio and then turn on RX or RX / TX. The Linker IIa will keep track of what memory the remote base radio is set to.
When you disable the remote base the Linker IIa will return the remote base to the home memory. It works very well. 73 Brian ka9pmm www.ics-ctrl.com georgiaskywarn wrote: > > Not true Mike. > Check out www.georgiaskywarn.com. > My remote has NO memories in it. It is a Kenwood TM-G707. All the > repeaters you see on that list, I can remote up and bring to the hub > repeater. I can also go back and tell it a freq / offset, then go > back and tell it the pl. > > Yes, you do have to have a "box" of sorts to do the magic between the > RC210 but very easy to build. > > Is the RB-1 still available? Or did they stop selling that. (I think > that is the number) I believe that is the one needed for the SCom. > > Robert > KD4YDC > > --- In [email protected] > <mailto:Repeater-Builder%40yahoogroups.com>, "Michael Ryan" <[EMAIL > PROTECTED]> > wrote: > > > > .as long as those repeaters have the SAME pl as you use for your own > > repeater. -M > > > > > > > > From: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > [mailto:[email protected] > <mailto:Repeater-Builder%40yahoogroups.com>] On Behalf Of Robert Pease > > Sent: Saturday, September 06, 2008 9:28 PM > > To: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > Subject: RE: Repeater controller suggestions (was Re: > [Repeater-Builder] Re: > > Looking ... > > > > > > > > I have the yaesu 857d. You use memories in the controller not the > radio. I > > admit that is a limitation but it can be worked around with macros if > > needed. I am only using a couple for local repeaters and calling > freqs so it > > is not a problem for me > > > > Rob > > > > Sent by Good Messaging (www.good.com) > > > > > > -----Original Message----- > > From: Michael Ryan [mailto:[EMAIL PROTECTED] > > Sent: Saturday, September 06, 2008 05:25 PM Eastern Standard Time > > To: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > Subject: RE: Repeater controller suggestions (was Re: > > [Repeater-Builder] Re: Looking ... > > > > Rob, the exasperation continues.. > > > > > > > > Every controller has its pros and cons just like cars. You research > what you > > need or want and pick one that best matches your needs. > > > > > > That is just what I said in both emails. Have fun with your > system, you > > obviously did the research and have something that works for YOU. > But tell > > me what HF radio that you have with memories that are accessed by the > > RC-210.maybe we'll learn something here. > > > > -Mike > > > > > > > > > > > > > > > > From: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > [mailto:[email protected] > <mailto:Repeater-Builder%40yahoogroups.com>] On Behalf Of Robert Pease > > Sent: Saturday, September 06, 2008 5:11 PM > > To: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > Subject: RE: Repeater controller suggestions (was Re: > [Repeater-Builder] Re: > > Looking ... > > > > > > > > You really should do you research better before you make statements > about > > the abilities of controllers. As I am sure others will tell you. I > have an > > Arcom RC-210 on a 440 repeater linked to a local 2m machine. Through > this > > system I offer. > > Wx alert as well as playback of alerts > > > > Frequency agile remote base from 80 meters thru 440 mhz, all > > modes,offsets,pl's with memories > > > > Site monitoring and alarms of temp, fans, voltage, swr, and output power > > using meter faces per the manual. > > > > And I am soon to add a complete weather station to the system but > for this I > > will have to piggyback a cat controller. > > > > Every controller has its pros and cons just like cars. You research > what you > > need or want and pick one that best matches your needs. Then build > onto the > > base controler with addons as in my want of a weather station. The > rc-re0 > > did not have it but the cat did. The cat didn't have the remote base I > > wanted and has a problem with control from a control rx while there > is a sig > > on the main rx. > > > > Just my 2 cents YMMV > > Rob > > > > Sent by Good Messaging (www.good.com) > > > > > > -----Original Message----- > > From: Michael Ryan [mailto:[EMAIL PROTECTED] > > Sent: Saturday, September 06, 2008 03:48 PM Eastern Standard Time > > To: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > Subject: RE: Repeater controller suggestions (was Re: > > [Repeater-Builder] Re: Looking ... > > > > The ranks have to be reading these posts and thinking, "heck, what I > have is > > the best controller, that's why I bought it." It's human nature, > but the > > choice of a controller ( and I know that I AM PREACHING TO THE CHOIR > HERE ) > > depends as much on what you intend to do with it or how it is going > to fit > > what you want to do with it. NEITHER the ARCCOM or the SCOM 7330 > will work > > if you intend to do anything more than fairly basic things.. a > repeater, a > > remote base on a fixed freq, etc, etc. Those discussions have taken > place > > RECENTLY on here and with the manufacturers. If someone wants to have a > > freq. agile radio, that has the different modes, bands, MEMORIES and > PL, how > > does S-COM and AROM fit into that category? They don't. It also is odd > > that just about all the user manuals for these controllers all refer > to the > > DOUG HALL interface. And he stopped making these how long ago? The > list of > > radios that can be interfaced with SOME of the controllers out there > is as > > old as my aunt Bea. So, my advice ( and sorry to say this is based on a > > brief but exasperating examination of the repeater controller > 'market') is > > LOOK before you leap. -Mike > > > > > > > > From: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > [mailto:[email protected] > <mailto:Repeater-Builder%40yahoogroups.com>] On Behalf Of [EMAIL PROTECTED] > > Sent: Saturday, September 06, 2008 2:51 PM > > To: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > Subject: Re: Repeater controller suggestions (was Re: > [Repeater-Builder] Re: > > Looking ... > > > > > > > > Hi Bob, > > > > > > > > >My recommendation for a 3-port controller is the SCom 7330. It's a bit > > >more expensive that the RC-210 but IMO is of higher quality. All ports > > >have dedicated hardware (tone & CTCSS generators, voice, etc.). > > > > > > > > Apples-to-apples: > > > > > > > > An RC-210 ($325) with an RC210R cabinet ($75) and an RAD triple > audio delay > > board ($75) costs $475. > > > > > > > > A 7330 costs $459 which includes the cabinet and three built-in audio > > delays. > > > > > > > > If you only buy one or two audio delays with the RC210, it's cheaper > than > > the 7330. Otherwise, the 7330 is cheaper. > > > > > > > > Disclosure: My company competes with Arcom and other controller > > manufacturers in the amateur market. > > > > > > > > 73, > > > > Bob > > > > > > > > Bob Schmid, WA9FBO, Member > > S-COM, LLC > > PO Box 1546 > > LaPorte CO 80535-1546 > > 970-416-6505 voice > > 970-419-3222 fax > > www.scomcontrollers.com > > > > > > > > > > > > _____ > > > > Psssst...Have you heard the news? There's a new > > <http://www.stylelist.com/trends?ncid=aolsty00050000000014 > <http://www.stylelist.com/trends?ncid=aolsty00050000000014>> fashion > blog, > > plus the latest fall trends and hair styles at StyleList.com. > > > > > > > > __________ NOD32 3423 (20080906) Information __________ > > > > This message was checked by NOD32 antivirus system. > > http://www.eset.com <http://www.eset.com> > > > > Since 1974, the award-winning Alpert JFCS has helped families of all > faiths > > throughout most of Palm Beach County, FL, via counseling, seniors > services, > > residences for the disabled, mentoring children, support groups and > a lot > > more. > > > > SOLUTIONS FOR LIVING (R) > > > > <http://www.JFCSonline.com <http://www.JFCSonline.com>> > www.JFCSonline.com > > > > > > > > Please take note of our new website and E-Mail Addresses. > > > > Please update your contacts ASAP. > > > > > > > > > ---------------------------------------------------------- > > ---- > > > > > > > > NOTICE: > > > > > > > > This e-mail message and all attachments transmitted with it are intended > > solely for the use of the addressee and may contain legally > privileged and > > confidential information. If the reader of this message is not the > intended > > recipient, or an employee or agent responsible for delivering this > message > > to the intended recipient, you are hereby notified that any > dissemination, > > distribution, copying, or other use of this message or its > attachments is > > strictly prohibited. If you have received this message in error, please > > notify the sender immediately by replying to this message and please > delete > > it from your computer. > > > > > > > > > > > > __________ NOD32 3423 (20080906) Information __________ > > > > This message was checked by NOD32 antivirus system. > > http://www.eset.com <http://www.eset.com> > > > > Since 1974, the award-winning Alpert JFCS has helped families of all > faiths > > throughout most of Palm Beach County, FL, via counseling, seniors > services, > > residences for the disabled, mentoring children, support groups and > a lot > > more. > > > > SOLUTIONS FOR LIVING (R) > > > > <http://www.JFCSonline.com <http://www.JFCSonline.com>> > www.JFCSonline.com > > > > > > > > Please take note of our new website and E-Mail Addresses. > > > > Please update your contacts ASAP. > > > > > > > > > ---------------------------------------------------------- > > ---- > > > > > > > > NOTICE: > > > > > > > > This e-mail message and all attachments transmitted with it are intended > > solely for the use of the addressee and may contain legally > privileged and > > confidential information. If the reader of this message is not the > intended > > recipient, or an employee or agent responsible for delivering this > message > > to the intended recipient, you are hereby notified that any > dissemination, > > distribution, copying, or other use of this message or its > attachments is > > strictly prohibited. If you have received this message in error, please > > notify the sender immediately by replying to this message and please > delete > > it from your computer. > > > > > > > > > > > > __________ NOD32 3423 (20080906) Information __________ > > > > This message was checked by NOD32 antivirus system. > > http://www.eset.com <http://www.eset.com> > > > >
