Bob, Are you talking "Tone Squelch" (tx / rx) or just txing the pl tone. I change the tx pl tone with my macros and the internal memories all the time. Now if all the repeaters you are txing the tone so you can run tone squelch...there is a mod you can do on the TM-G707 so that the computer port on the radio brings out the CT. However, you won't be able to run carrier squelch if you do that mod. Robert KD4YDC
--- In [email protected], [EMAIL PROTECTED] wrote: > > At 9/7/2008 05:20, you wrote: > >Not true Mike. > >Check out www.georgiaskywarn.com. > >My remote has NO memories in it. It is a Kenwood TM-G707. All the > >repeaters you see on that list, I can remote up and bring to the hub > >repeater. I can also go back and tell it a freq / offset, then go > >back and tell it the pl. > > I've yet to see a G707 with remotely controllable CTCSS that doesn't use > the radio's memories. Did you run a haywire into the radio to bring out > the contacts for the "OK" button? I don't see any other way of > accomplishing remote CTCSS select because the "OK" button must be pushed to > complete the CTCSS freq. change, & this button isn't available on the > microphone (thanks a lot, Kenwood!). > > Bob NO6B >
