The side-by-side diffs? That's part of the review process, showing the diff
of what changed. Not really sure what you mean by "unless it is the first
review?"

Christian

-- 
Christian Hammond - chip...@chipx86.com
Review Board - http://www.review-board.org
VMware, Inc. - http://www.vmware.com


On Thu, Aug 20, 2009 at 6:15 AM, Agile <review.c...@gmail.com> wrote:

>
> Thanks Christian. It works now. I can create a post-commit
> review for a particular release.
>
> However, it failed in creating a post-review for the very last
> revision.
>
> Also, unless it is the first review, it always shows two successive
> revisions side by side. Is there any way of having reviewers look
> at a single revision on the screen?
>
> Thanks again.
>
> Kyle
>
> On Aug 19, 6:57 pm, Christian Hammond <chip...@chipx86.com> wrote:
> > You should put the URL shown by 'svn info' in your checkout as the Mirror
> > Path. Hopefully it doesn't have auth info in the URL.
> >
> > Christian
> >
> > --
> > Christian Hammond - chip...@chipx86.com
> > Review Board -http://www.review-board.org
> > VMware, Inc. -http://www.vmware.com
> >
> >
> >
> > On Wed, Aug 19, 2009 at 2:31 PM, Code Review <review.c...@gmail.com>
> wrote:
> > > Thanks.
> >
> > > My checkout is using:
> >
> > > svn cohttp://myrepository.mydomain.edu/svn/myproject
> >
> > > The authentication method used is svn+htaccess.
> >
> > > So, what should I write under the Mirror Path?
> >
> > > Kyle
> >
> > > On Wed, Aug 19, 2009 at 3:38 PM, Christian Hammond <
> chip...@chipx86.com>wrote:
> >
> > >> Sounds like your repository as reported by svn info doesn't match the
> > >> Repository entry in Review Board.
> >
> > >> The likely cause is that your checkout is using https or svn+ssh, or
> > >> something, whereas your Repository entry is using http.
> >
> > >> You should continue using http for the Path in the Repository, but
> then
> > >> set Mirror Path to be whatever your checkout is using.
> >
> > >> Christian
> >
> > >> --
> > >> Christian Hammond - chip...@chipx86.com
> > >> Review Board -http://www.review-board.org
> > >> VMware, Inc. -http://www.vmware.com
> >
> > >> On Wed, Aug 19, 2009 at 6:37 AM, Agile <review.c...@gmail.com> wrote:
> >
> > >>> Just a quick correction, I forgot to say that I had put a dot ('.')
> at
> > >>> the end while setting:
> >
> > >>> > svn propset reviewboard:urlhttp://myreviewboard.mydomain.edu.
> >
> > >>> I think I forgot to mention that. I find this useful to add so that
> > >>> people
> > >>> will not think that I made a mistake there.
> >
> > >>> Thanks in advance.
> >
> > >>> Kyle
> >
> > >>> On Aug 19, 9:30 am, Code Review <review.c...@gmail.com> wrote:
> > >>> > Thanks Christian. I grabbed and installed the latest tgz file:
> > >>> > RBTools-0.2beta2.dev-20090819.tar.gz<
> > >>>http://downloads.review-board.org/nightlies/RBTools-0.2beta2.dev-2009
> ..
> > >>> .>
> >
> > >>> > and gave a "sudo python setup.py". I think everything went
> > >>> > smoothly.
> >
> > >>> > Now, I am having problem with setting the repository configuration.
> > >>> > I would appreciate if you could help me on this. Here is
> > >>> > what I do:
> >
> > >>> > 1. Get the most recent working copy with
> >
> > >>> > > svn cohttp://myrepository.mydomain.edu/svn/myproject
> >
> > >>> > 2. Change directory into the top directory of my project
> >
> > >>> > > cd myproject
> >
> > >>> > 3. I want to do a post-commit review. So, I issue:
> >
> > >>> > > post-review --revision-range 122
> > >>> > > Unable to find a Review Board server for this source code tree.
> >
> > >>> > OK. Then, I follow the instructions here:
> >
> > >>> >
> http://www.review-board.org/docs/manual/dev/users/tools/post-review/
> >
> > >>> > Particularly, I look under the configuration section. While I am in
> > >>> > the top directory of my project (myproject), I issue:
> >
> > >>> > > svn propset reviewboard:urlhttp://myreviewboard.mydomain.edu
> > >>> > > property 'reviewboard:url' set on '.'
> >
> > >>> > Note that this address is the address of the front page of my
> > >>> reviewboard
> > >>> > site.
> >
> > >>> > I again issue:
> >
> > >>> > > post-review --revision-range 122
> >
> > >>> > Error creating review request: The repository path specified is not
> in
> > >>> the
> > >>> > list of known repositories (code 206)
> >
> > >>> > However, I had indeed created this repository in my Review Board
> site.
> >
> > >>> > Then, I see the next line in the configuration section ofhttp://
> > >>>www.review-board.org/docs/manual/dev/users/tools/post-review/
> > >>> > It says:
> >
> > >>> > "You can set the repository URL in .reviewboardrc file in any
> > >>> directory.
> > >>> > This must be a directory in the user’s checkout path to work."
> >
> > >>> > So, without changing anything I also create a .reviewboardrc
> > >>> > (under the top directory, myproject)
> >
> > >>> > > vi .reviewboardrc
> >
> > >>> > As a single line, I enter
> >
> > >>> > REVIEWBOARD_URL = "http://myreviewboard.mydomain.edu";
> >
> > >>> > I try again:
> >
> > >>> > > post-review --revision-range 122
> > >>> > > Error creating review request: The repository path specified is
> not
> > >>> in the
> >
> > >>> > list of known repositories (code 206)
> >
> > >>> > Thank you very much in advance.
> >
> > >>> > Kyle
> >
> > >>> > On Tue, Aug 18, 2009 at 10:49 PM, Christian Hammond <
> > >>> chip...@chipx86.com>wrote:
> >
> > >>> > > Hi Kyle,
> >
> > >>> > > Can you grab the latest nightly from
> > >>> > >http://downloads.review-board.org/nightlies/andgive it a try?
> This
> > >>> may
> > >>> > > be fixed.
> >
> > >>> > > Christian
> >
> > >>> > > --
> > >>> > > Christian Hammond - chip...@chipx86.com
> > >>> > > Review Board -http://www.review-board.org
> > >>> > > VMware, Inc. -http://www.vmware.com
> >
> > >>> > > On Tue, Aug 18, 2009 at 11:44 AM, Kyle <review.c...@gmail.com>
> > >>> wrote:
> >
> > >>> > >> hello -
> >
> > >>> > >> I would appreciate your help on this problem.
> >
> > >>> > >> I receive the following error when I issue:
> >
> > >>> > >> post-review
> >
> > >>> > >> (pre or post commit)
> >
> > >>> > >> *****
> >
> > >>> > >> Traceback (most recent call last):
> > >>> > >>  File "/usr/local/bin/post-review", line 5, in <module>
> > >>> > >>    pkg_resources.run_script('RBTools==0.2beta1', 'post-review')
> > >>> > >>  File "/usr/lib/python2.6/dist-packages/pkg_resources.py", line
> 448,
> > >>> > >> in run_script
> > >>> > >>    self.require(requires)[0].run_script(script_name, ns)
> > >>> > >>  File "/usr/lib/python2.6/dist-packages/pkg_resources.py", line
> > >>> 1173,
> > >>> > >> in run_script
> > >>> > >>    exec script_code in namespace, namespace
> > >>> > >>  File "/usr/local/lib/python2.6/dist-packages/RBTools-0.2beta1-
> > >>> > >> py2.6.egg/EGG-INFO/scripts/post-review", line 2313, in <module>
> >
> > >>> > >>  File "/usr/local/lib/python2.6/dist-packages/RBTools-0.2beta1-
> > >>> > >> py2.6.egg/EGG-INFO/scripts/post-review", line 2295, in main
> > >>> > >>  File "/usr/local/lib/python2.6/dist-packages/RBTools-0.2beta1-
> > >>> > >> py2.6.egg/EGG-INFO/scripts/post-review", line 2009, in
> tempt_fate
> > >>> > >>  File "/usr/local/lib/python2.6/dist-packages/RBTools-0.2beta1-
> > >>> > >> py2.6.egg/EGG-INFO/scripts/post-review", line 2009, in
> tempt_fate
> > >>> > >> ........
> > >>> > >> ........
> > >>> > >> ........ (repeats the last line many times)
> > >>> > >> ........
> > >>> > >> ........
> > >>> > >> ........
> > >>> > >> ........
> > >>> > >>  File "/usr/lib/python2.6/urllib2.py", line 124, in urlopen
> > >>> > >>    return _opener.open(url, data, timeout)
> > >>> > >>  File "/usr/lib/python2.6/urllib2.py", line 383, in open
> > >>> > >>    response = self._open(req, data)
> > >>> > >>  File "/usr/lib/python2.6/urllib2.py", line 401, in _open
> > >>> > >>    '_open', req)
> > >>> > >>  File "/usr/lib/python2.6/urllib2.py", line 361, in _call_chain
> > >>> > >>    result = func(*args)
> > >>> > >>  File "/usr/lib/python2.6/urllib2.py", line 1130, in http_open
> > >>> > >>    return self.do_open(httplib.HTTPConnection, req)
> > >>> > >>  File "/usr/lib/python2.6/urllib2.py", line 1102, in do_open
> > >>> > >>    h.request(req.get_method(), req.get_selector(), req.data,
> > >>> headers)
> > >>> > >>  File "/usr/lib/python2.6/httplib.py", line 874, in request
> > >>> > >>    self._send_request(method, url, body, headers)
> > >>> > >>  File "/usr/lib/python2.6/httplib.py", line 911, in
> _send_request
> > >>> > >>    self.endheaders()
> > >>> > >>  File "/usr/lib/python2.6/httplib.py", line 868, in endheaders
> > >>> > >>    self._send_output()
> > >>> > >>  File "/usr/lib/python2.6/httplib.py", line 740, in _send_output
> > >>> > >>    self.send(msg)
> > >>> > >>  File "/usr/lib/python2.6/httplib.py", line 699, in send
> > >>> > >>    self.connect()
> > >>> > >>  File "/usr/lib/python2.6/httplib.py", line 683, in connect
> > >>> > >>    self.timeout)
> > >>> > >>  File "/usr/lib/python2.6/socket.py", line 502, in
> create_connection
> > >>> > >>    sock = socket(af, socktype, proto)
> > >>> > >>  File "/usr/lib/python2.6/socket.py", line 182, in __init__
> > >>> > >>    _sock = _realsocket(family, type, proto)
> > >>> > >> RuntimeError: maximum recursion depth exceeded while calling a
> > >>> Python
> > >>> > >> object
> >
>

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"reviewboard" group.
To post to this group, send email to reviewboard@googlegroups.com
To unsubscribe from this group, send email to 
reviewboard+unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/reviewboard?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to