maybe suggestion here of using dtmfdial app to generate audio tone strings and use a cart recording to play directly to aud channel?
is it over a dedicated serial circuit where a standard modem in dial mode might work? On 18/03/13 02:18, Gavin Stephens wrote: > Yes that is the Intuitive board I looked at. I emailed about it but it > requires that the automation system wait for an acknowledgement from the > board before sending the next character. However it requires two characters > before it can make a tone grrrr. It doesn't take the while string in one > swoop. > > On 18/03/2013, at 15:12, VE4PER/ Andy <[email protected]> wrote: > >> something like this >> >> http://www.icircuits.com/prod_dtmfenc232.html >> >> >> On 18/03/13 01:48, Gavin Stephens wrote: >>> Does anyone have any ideas for something that can do this in RD... >>> >>> I've looked at inituitive circuits boards but they have acknowledgements >>> between characters sent so no go. I've also looked at circuitwerkes genr8 >>> but it requires minimum 30ms delay between sending characters etc.... Does >>> anyone know of anything that will take an rs232 serial out string all at >>> once from RD and turn this in dtmf without character delays or >>> acknowledgement waits etc...? I'd rather use DTMF than sub-audible tones >>> over an AAC independent stereo stream (left mono programme/right DTMF). >>> >>> >>> >>> _______________________________________________ >>> Rivendell-dev mailing list >>> [email protected] >>> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >> _______________________________________________ >> Rivendell-dev mailing list >> [email protected] >> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
