Yes it has lease line mode fir two or four wire operation. Although it sits there with a modem tone in that mode constantly unfortunately. It's whether I can keep it quiet and off hook so It dials instantly. I'll have a play with it though.
On 18/03/2013, at 15:43, VE4PER/ Andy <[email protected]> wrote: > imagine it would as a lot of ext modems came so you could set them up on > a dedicated live cct without using dial up capabilities > > On 18/03/13 02:38, Gavin Stephens wrote: >> Ah never thought of that. I have an old 28k external modem. I'll just have >> to see if it'll stay off hook I'll go read the manual. >> >> On 18/03/2013, at 15:24, VE4PER/ Andy <[email protected]> wrote: >> >>> maybe suggestion here of using dtmfdial app to generate audio tone >>> strings and use a cart recording to play directly to aud channel? >>> >>> is it over a dedicated serial circuit where a standard modem in dial >>> mode might work? >>> >>> On 18/03/13 02:18, Gavin Stephens wrote: >>>> Yes that is the Intuitive board I looked at. I emailed about it but it >>>> requires that the automation system wait for an acknowledgement from the >>>> board before sending the next character. However it requires two >>>> characters before it can make a tone grrrr. It doesn't take the while >>>> string in one swoop. >>>> >>>> On 18/03/2013, at 15:12, VE4PER/ Andy <[email protected]> wrote: >>>> >>>>> something like this >>>>> >>>>> http://www.icircuits.com/prod_dtmfenc232.html >>>>> >>>>> >>>>> On 18/03/13 01:48, Gavin Stephens wrote: >>>>>> Does anyone have any ideas for something that can do this in RD... >>>>>> >>>>>> I've looked at inituitive circuits boards but they have acknowledgements >>>>>> between characters sent so no go. I've also looked at circuitwerkes >>>>>> genr8 but it requires minimum 30ms delay between sending characters >>>>>> etc.... Does anyone know of anything that will take an rs232 serial out >>>>>> string all at once from RD and turn this in dtmf without character >>>>>> delays or acknowledgement waits etc...? I'd rather use DTMF than >>>>>> sub-audible tones over an AAC independent stereo stream (left mono >>>>>> programme/right DTMF). >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Rivendell-dev mailing list >>>>>> [email protected] >>>>>> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >>>>> _______________________________________________ >>>>> Rivendell-dev mailing list >>>>> [email protected] >>>>> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >>>> _______________________________________________ >>>> Rivendell-dev mailing list >>>> [email protected] >>>> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >>> _______________________________________________ >>> Rivendell-dev mailing list >>> [email protected] >>> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev >> _______________________________________________ >> Rivendell-dev mailing list >> [email protected] >> http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
