The tie strip was intended for use with Code 125 rail, and that would go in,
but it was a tight fit. I did a layout with 100 in Miller, starting in the
mid-70s and tearing out due to a move in 1996; and the rail-insertion was tight
enough as it was; the tight gauge would be half the difference between the base
width of Code 125 and of Code 100. Later editions of the tie strip had wood
grain molded into it.
You could run AF wheels on Miller with 125 rail, not through switches, of
course, the molded spike heads were low enough to clear it. They had to be
big to have enough plastic mass to do the job. I got to see Bob Miller's place
a couple times in the mid-1960s, and even today it is an awesome memory.
DJE
----- Original Message -----
From: John Degnan
To: POST : (S) S-Scale Group
Sent: Tuesday, October 21, 2008 8:48 PM
Subject: {S-Scale List} Tie Strip (Was Miller Tie Strip way back in June)
Speaking of Tie Strips...
I finally got a small piece of this Miller Tie Strip and have had time to
review it. Having been in S for only a few years, I had never seen any
before. My thoughts... not bad at all for something of that age! Not
great by any means, but not bad. I took the code 100 rail from a piece of
Atlas HO snap-track and slid them into the strip and the gauge came out
almost right, but just a little on the tight side. That, and the fact that
the "spikes" are GODZILLA sized are the only real problems I could find
with it... oh, and the lack of detail on the ties. The perfect spacing and
arrangement of the ties could be an issue for some, but that can be
overcome by using the strip primarily on well-maintained mainlines.
Now, I have a question... would such a product do well today? If someone
were to offer tie strip today... a tie strip that is far superior to the
Miller strip, would there be a market for it?
John Degnan
[EMAIL PROTECTED]
The Unites States is NOT a country whose citizens have a right to RECEIVE,
It is a country whose citizens have a right to ACHIEVE.
> ----- Original Message -----
> From: "Robert Nicholson" <[EMAIL PROTECTED]>
> Sent: Saturday, June 14, 2008 9:35 PM
> Subject: {S-Scale List} Miller Tie Strip
>
> Does anyone have any of the old Robert L. Miller tie strip they'd
> like to divest themselves of, or even the "S"cenery Unlimited
> reproduction stuff?
>
> Let me know what you want for it, and I'll decide if I can afford
> it.
> Bob Nicholson
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
