Not that I recall
cheers
> To: [email protected]
> From: [email protected]
> Date: Thu, 20 Oct 2011 05:09:51 -0700
> Subject: Re: {S-Scale List} Re: Sealing laser cut buildings
>
> Burt,
> I've run into problems glueing structures together that have been pre-painted
> with the glue not holding. Since then, I've avoided painting areas that will
> later need to absorb glue. Have you found this to be a problem with the
> sanding sealer?
>
> Ed Kozlowsky
> Sanford, Maine
>
>
> >________________________________
> >From: Bert Cutler <[email protected]>
> >To: [email protected]
> >Sent: Wednesday, October 19, 2011 4:16 PM
> >Subject: RE: {S-Scale List} Re: Sealing laser cut buildings
> >
> >
> >
> >
> >Gentleman, If you try Scale Coat sanding sealer on your wood kits you might
> >be amazed and find it works. First of all you can sand one side and get a
> >smoother finish and seal the other. Then you can paint to your hearts
> >content. Thanks BC
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
