Can you tap the mounting hole to use a 1-72 machine screw? I've done that with some coupler applications, but I don't use 802's, so can't answer my own question
boB Nicholson ___________________________________________________ --- In [email protected], "richgajnak" <rustytraque@...> wrote: > > Seeing the 802 is an 803 in "S" clothing, I guess maybe the On3er's weren't > fond of the good old 2-56. > > I feel you pain, Dave. I once tried modifying an 802 for a 2-56. The > results were less than stellar. > > Rich G(ajnak) > > --- In [email protected], David Engle <rirocket@> wrote: > > > > What irritates me most is why KaDee didn't design the 802 to have a 2-56 > > center bolt, is it the only one that way? > > > > Dave Engle > > > > --- In [email protected], Michael Greene wrote: > > > Here's the relevant dimensions of the knuckle face height from notes I > > > have handy: > > > > > > Prototype Type E 11" > > > Prototype Type D 9" > > > Prototype 3/4 MCB 6.75" > > > Prototype 1/2 MCB 4.5" > > > > > > KD 804 15 11/16" (KD O scale coupler) > > > KD 802/808 12" (also same as KD 803) > > > SHS 01295 11.5" > > > PROTO Max 10 1/8" > > > KD 5 10 1/8" > > > Steam Era Auto Couplers II 8 5/8" > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
