I think for a machine screw mounting of the 802 you would need to tap 0-80.
The screws Kadee supplies (and sells separately0 are 0-48, works well in wood and plastic. Same screw they use in their 714 HOn3 coupler. Charles Weston --- On Mon, 3/4/13, David Engle <[email protected]> wrote: From: David Engle <[email protected]> Subject: Re: {S-Scale List} Kadee No 5s To: [email protected] Date: Monday, March 4, 2013, 2:29 PM I doubt very much this is possible, Bob. Dave Engle --- On Mon, 3/4/13, shabbona_rr <[email protected]> wrote: From: shabbona_rr <[email protected]> Subject: Re: {S-Scale List} Kadee No 5s To: [email protected] Date: Monday, March 4, 2013, 12:38 PM Can you tap the mounting hole to use a 1-72 machine screw? I've done that with some coupler applications, but I don't use 802's, so can't answer my own question boB Nicholson ___________________________________________________ --- In [email protected], "richgajnak" wrote: > > Seeing the 802 is an 803 in "S" clothing, I guess maybe the On3er's weren't > fond of the good old 2-56. > > I feel you pain, Dave. I once tried modifying an 802 for a 2-56. The results > were less than stellar. > > Rich G(ajnak) > > --- In [email protected], David Engle wrote: > > > > What irritates me most is why KaDee didn't design the 802 to have a 2-56 > center bolt, is it the only one that way? > > > > Dave Engle > > > > --- In [email protected], Michael Greene wrote: > > > Here's the relevant dimensions of the knuckle face height from notes I > > > have handy: > > > > > > Prototype Type E 11" > > > Prototype Type D 9" > > > Prototype 3/4 MCB 6.75" > > > Prototype 1/2 MCB 4.5" > > > > > > KD 804 15 11/16" (KD O scale coupler) > > > KD 802/808 12" (also same as KD 803) > > > SHS 01295 11.5" > > > PROTO Max 10 1/8" > > > KD 5 10 1/8" > > > Steam Era Auto Couplers II 8 5/8" > > >
