Well, I got the offending plug out of the way with a pair of sidecutters and now have the NW-2 operational. Its doing a fine job on the CB&Q side of Mooar Yard, and after some running time should work well in that capacity. Although its overloaded with unnecessary technology, I have most of it disabled and it doesn't interfere with normal operation.
Photos to follow "S"tring boB -________________________________________________ --- In [email protected], "shabbona_rr" <user141771@...> wrote: > > The SHS NW-2 that I purchased on Ebay arrived yesterday, and to say I am > unimpressed would be an understatement. Way too much technology stuffed in > this thing to make it practical. The last thing I have done is install the DC > plug, per the instructions, so I can use it on SHABBONA. However, the plug I > removed does not come out and is tied to a circuit board in the top of the > body, and now there is such a glop of wires that I cannot get the body back > on the frame. Worse, there is no way to place this plug so nothing binds. I > wish I would have gone with an AM S12. I do not need this trouble. > > Any advice, including purchase offers, is welcome > > boB Nicholson _____________________________________ > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
