Sold.
On Wed, Oct 23, 2019 at 4:04 PM Ken Nicely via Groups.Io wrote:
> I am selling my KX3 transceiver.
>
> KX3 KX3-K 160-6 M Transceiver
> KXAT3 Internal automatic antenna tuner
> KXBC3 Internal NiMH Charger/Clock
> KXFL3 KXFL3 Dual-Passband Roofing Filter
> K
Cable
Soft Case
I am the original owner.
Asking $1100.00 shipped CONUS.
https://photos.app.goo.gl/oG7jeYb3YsuKAz1EA
Please respond directly to k...@nicelyweb.com if interested.
Ken Nicely KE3C
__
Elecraft mailing list
Home: http
For Sale:
Fully Loaded Elecraft K3/100, 100 Watt, with 2nd receiver, general coverage
module, internal tuner, voice recorder, 2 Meter module, transverter IF,
and 9 filters. Serial number 3115. $4,863 invested. Working perfectly.
K3/100-F1 K3 100W Xcvr.
KAT3-F 1 K3 ATU
KUSB
iver there as well..
I can send photos to interested buyers.
Contact Ken KE3C at k...@nicelyweb.com or call 610-952-3602.
On Wed, May 10, 2017 at 4:15 PM, Ken Nicely <k...@nicelyweb.com> wrote:
> Electaft K3/100, 100 Watt, with 2nd receiver, general coverage module, 2
> Meter module
Electaft K3/100, 100 Watt, with 2nd receiver, general coverage module, 2
Meter module, internal tuner, transverter IF, voice recorder and 9
filters. Below is a total list with the prices I paid. Serial number
3115. $4,863 invested. Working perfectly. I am asking $3,200.
K3/100-F$2089.95
I can't believe they are letting you go on vacation ;-
So you are not taking the laptop. The more important question is.are
you taking a radio?
Ken (KC) KE3C
On Fri, May 31, 2013 at 8:05 PM, Don Wilhelm w3...@embarqmail.com wrote:
Hi,
Since I get frequent requests for assistance and
I had this same issue about a week ago. I did call Electraft and they
asked me to remove the cover and check some voltages. I knew the problem
had started when I was messing around with the rs232 connections, so I
thought I would undo the changes before I started working on the radio.
I think
Don,
You have better not die on us! I still a lot to learn from you ;-
Keep up the good work.
Ken (KC) Nicely, KE3C
On Sun, Mar 31, 2013 at 8:54 PM, Don Wilhelm w3...@embarqmail.com wrote:
No joke, I am alive and well. Sorry you interpreted all the posts that
way. If you want to see the
What does the * on the left side of the KPA-500 mean? I have been looking
for this in the manual and can not find any mention of it.
Ken KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
- From: Ken Nicely Sent: Saturday, March 16, 2013
3:12 PM To: elecraft Subject: [Elecraft] * on KPA-500
What does the * on the left side of the KPA-500 mean? I have been looking
for this in the manual and can not find any mention of it.
Ken KE3C
The Ethernet port is long overdue. Although, having tried to implement
that in a PIC myself, I can tell you it is a lot more challenging in a PIC
controller than it is on a PC. Still I would love it. The pigtail is okay
as a substitute.
Ken (KC) Nicely KE3C
On Fri, Jan 4, 2013 at 3:11 PM,
A new digital mode that can be sent and received without a computer. You
just have to learn it.
http://www.ke3c.com/ToneWave.php
Ken (KC) Nicely KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Well, I guess it is new to me. I did not know it was used so long ago.
Why not 8 tonesbecause I have trouble decoding 2 in my head.
I hope everyone enjoyed the diversion. I figured that this group, being a
good number of hard core CW operators, would appreciate it. I initially
thought
The New Elecraft D3 power supply.
Features:
- Software defined power supply.
- Software upgrades via the web.
- Microprocessor controlled voltage and current meters with LED bar
graph.
- RS232 connection to K3 so you can monitor you current and power draw
with your PC.
-
Glad you shared. I had been thinking about using a bluetooth headphones,
but I will avoid them now.
Ken KE3C
On Sat, Sep 1, 2012 at 4:38 PM, Sanger, Joseph joseph.san...@nyumc.orgwrote:
Well, I just figured out the 'problem' with the delayed response of keying
the KX3 rig I'm LOL'ing.
will be quick to add it.
Ken Nicely KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
the
communication. Most of the time would be adding the setup screens.
Ken Nicely KE3C
On Sun, Aug 29, 2010 at 8:36 AM, Brian Alsop als...@nc.rr.com wrote:
Ken Nicely wrote:
Please give us a network port on the K3 and P3. This would allow each
program to independently communicate with both
just need the option for those of us that want true performance and a
clean interface to that understands who it is talking to.
Ken Nicely KE3C
On Sun, Aug 29, 2010 at 11:22 AM, Steve Jackson invento...@gmail.comwrote:
Ken
A variety of inexpensive (3rd party) devices are on the market to do
it allow the K3 to communicate independently with each
software application.
Ken Nicely KE3C
On Sun, Aug 29, 2010 at 10:43 AM, R. Kevin Stover rksto...@mchsi.comwrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Not such a good idea either.
Elecraft would have to provide drivers for every
to the device it needs to talk to.
Ken Nicely KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
I personally have tried about 5 different adapters. Even USB-RS232 adapters
from with the same chip set different sources seem to function differently.
It took 5 adapters before I found one that would work with my laptop.
Personally, I think the issue is that different adaptors function
There are several free software applications that emulate an rs-232 port and
send the rs-232 commands to a configured ethernet IP address and port.
They work very similar to LP Bridge, but they allow you to forward the
communication to the ethernet port. Once the software is installed it
creates
You are certainly right that there would need to be some intelligence added
in on the hardware side. Some of the newer pic controllers like the
pic18f87j60 (I happen to be playing with that one now) have much of the
functionality built into the controller and there are libraries for the
routines,
No no no
Just add Ethernet.
On Mar 13, 2010, at 2:08 PM, eric manning eric.mann...@engr.uvic.ca
wrote:
All in favour of a USB port on the K3?
Then we could forget about un-necessary, expensive , flaky and
crash-prone USB to serial adapters.
THe serial port with its RS-232 interface
I had been out of the hobbyor maybe I should say, less
interested.for several years and a good friend of mine Andy, KD3RF
recommended that I get a K3. It has really reignited my interest and opened
up a whole new level of the hobby to me.
While I am nowhere near your location, I can tell
This is just a guess, but the most likely scenario I can think of is that
the Software is getting a connection to a com port that is not the K3.
Maybe you could try disabling any other com ports through device manager
and then try to start the K3 utility. If it is connecting to another com
port,
I have the MFJ 264
http://www.mfjenterprises.com/Product.php?productid=MFJ-264
I have been using this for about 9 months now without a problem. I use it
to tune the amp putting about 500 or 600 watts into it for short periods of
time with no problems. If you want a nice one that you wont
I don't think it comes with the amp. It is just a cable with RCA
connectors on each end, one half of a left right speaker cable will
do. Some claim it should be shielded cable, but I have used
unshielded with no problems.
KEN. KE3C
On Feb 21, 2010, at 3:09 PM, David Herring
Hilarious!
Ken KE3C
On Tue, Feb 9, 2010 at 6:58 PM, Mike B kw...@comcast.net wrote:
Grant Youngman wrote:
Too good!! :-)
And too true!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
This morning I was listening on 15 meters using ant2 which is hooked to one
of my verticals. I switched to ant1 (my second vertical) and I could barely
make out the signal. While still set to ant1 I switched to diversity
receive and I still could barely hear the signal in either ear. I then
So does the receive antenna have to be on the aux port of the Receive Ant.,
IF out board (KXV3A) for diversity, or can it also be on Ant2 of the ATU
(KAT3-F)?
On Sun, Feb 7, 2010 at 12:17 PM, Bill Johnson k9...@live.com wrote:
That should read aux antenna when in b-set
*Bill*
K9YEQ
KX1,
would also be interested in knowing if there are others on the list that
have done some PIC programming and what language and software they use or
would recommend.
Ken Nicely KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net
can use ANT1 and AUX_RF if you have your SUBRX plugged
into the AUX_RF BNC jack. Or you can use RX_ANT and ANT2 or AUX_RF.
The RX_ANT port can only be used on the main RX or both RXs at the same
time it can't be used on the sub RX only.
~Brett
On Sun, 2010-02-07 at 12:37 -0500, Ken Nicely
You did a nice job running the net Roger. Thanks for running it.
Ken N3PSJ
On Sun, Jan 17, 2010 at 11:17 AM, Roger Stein burch.cr...@gmail.com wrote:
Will do...K7SJ...1 KW 2-el Quad at 50' headed 'out there'! All relays
welcome.
73, Roger
K7SJ
K3 #75
On Sat, Jan 16, 2010 at 12:28
34 matches
Mail list logo