A couple questions about OO.
But: nutshell that I've wanted to know for months:: is there
some automagic way of having OO print in "reverse-page" mode?
And: Is there a way of auto paragraph indenting 5 spaces?
Every time I edit a file I have to by-hand in
Paul Pathiakis wrote:
> my rc.conf has:
>
> ifconfig_ath0="inet 192.168.1.24 netmask 0xff00 ssid my_ap mode 11g
> mediaopt adhoc"
> defautrouter="192.168.1.12"
> nis_client_enable="YES"
>
> ifconfig -a shows:
>
> ath0: flags=8843 mtu 1500
> inet6 fe80::213:46ff:fe94:75c3%ath0 prefi
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Can you tell me a simple way of retrieving recently deleted files?
Regards
Phil Sweeney
Superior Pest Management
P.O Box 68
www.superiorpest.com.au
[EMAIL PROTECTED]
H.R.M.C NSW 2310
___
I guess, if
On 06/08/06 21:29, Norberto Meijome wrote:
Hi all,
I'm looking for a tool that will allow me to compare directories (recursively)
showing what files are different,etc. meld ( textproc/meld ) can do this to
some extent, showing missing files,etc, but not showing what files are
different withoug ha
>> > I'm looking for a tool that will allow me to compare directories
>> > (recursively) showing what files are different,etc. meld
>>( textproc/meld )
>> > can do this to some extent, showing missing files,etc, but not showing
>> > what files are different withoug having to open each file and
Hi,
I wish this was a little less complicated, but it seems pretty straightforward
and I got it to work in no time at all, so I think I have it right.
Machines:
Two AMD Socket 462 boxen
512 MB RAM
RTL8169 Gb chipset (reX) cards
Wireless card is Atheros 5212 based
OK. Everything on the NIS/NFS
Grub does well for me. Set it up for Linux and then set it up for
BSD, making sure the UFS driver's in there. Here's my command-list
for booting FBSD.
root (hd0,0,a)
kernel /boot/loader
boot
I might have the spacing wrong, I'm doing it from memory, but the
data's all there.
On 10 Jun 20
Hello;
If I want to set up a dual boot of either Linux or FreeBSD, what is the
best way to go about it?
Use Lilo, grub, or does FreeBSD have a boot loader that it likes better
and Linux won't object to?
i'm planning on using Debian on a separate bootable hard drive. I have
to get more info on w
One of the more "undocumented" things here is to make sure that in your
/usr/local/etc/nss_ldap.conf to make sure that your bind_polcy is soft.
If not, you will have no end of problems if you ldap server goes down.
Basically if you have in your nsswitch.conf:
Passwd: files ldap
Group: files ld
On 09/06/06 Michael P. Soulier said:
> Ok. Upgrading now.
And it shuts down my mysql server, but does not start it again. That's not
very nice. Should the upgrade not handle this?
Mike
--
Michael P. Soulier <[EMAIL PROTECTED]>
"Any intelligent fool can make things bigger and more complex... I
Aguiar Magalhaes wrote:
> Hi list,
>
> I'm updating the Free 5.3 to Free 6.1. I've used the
> sequence:
>
> cvsup -g -L 2 freebsd.sup
> mergemaster -p
> mergemaster
> cd /usr/src
> make buildworld
> make installworld
> cd /usr/src/sys/i386/conf
> config MYKERNEL
> make cleandepend
> make depend
>
On 09/06/06 Riemer Palstra said:
> > I'm assuming mysql41-server, since it's version 4.1.15.
>
> Your assumption is right.
Ok. Upgrading now.
If the port is mysql41-server, maybe the package name should be similar?
Thanks,
Mike
--
Michael P. Soulier <[EMAIL PROTECTED]>
"Any intelligent foo
Darryl Hoar wrote:
>> -Original Message-
>> From: Kevin Kinsey [mailto:[EMAIL PROTECTED]
>> Sent: Friday, June 09, 2006 1:29 PM
>> To: [EMAIL PROTECTED]
>> Cc: freebsd-questions@freebsd.org
>> Subject: Re: Move hard drive
>>
>>
>> Darryl Hoar wrote:
>>> Greetings,
>>> I am running FreeBSD 6
On Fri, 9 Jun 2006 20:56:17 +1000 (EST)
Ian Smith <[EMAIL PROTECTED]> wrote:
> Re: freebsd-questions Digest, Vol 137, Issue 55
>
> Hi Beto,
>
> (offlist as it's just a silly answer, not one for X)
Hey Ian,
thx, not a silly answer at all
>
> > I'm looking for a tool that will allow me to compa
Protect Your Account Info
Mak e sure you never provide your password to fraudulent websites.
PayPal will never ask you to enter your password in an email.
For more information on protecting yourself from fraud, please review
our Security Tips at http
Only option is to restore from backup.
YOU DO backup your data?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Phil
Sweeney
Sent: Thursday, June 08, 2006 7:37 PM
To: [EMAIL PROTECTED]
Subject: restoring deleted files
Can you tell me a simple way of retrie
Freminlins wrote:
> Hello,
>
> I've always steered clear of using Sendmail (prefering Exim), but I thought
> I would give it a try and am having real difficulties with something I think
> should be simple.
>
> I want to keep running Exim on port 25. I want Sendmail to run on a
> different port.
libtool: link: cannot find the library `'
The net-im/kopete port will be upgraded to 0.12 soon. If you don't want
to wait, it is possible to compile from source of course - but you will
run into a couple of minor problems along the way. The one above is
caused by the outdated version of libto
Hello, everyone. I am running FreeBSD 6.0-Release 2 with KDE 3.5.3_2 installed
via ports. I am trying to compile kopete 0.12.0 from source since it was not
included in the kdenetwork installation, however the 'gmake' command fails
with the following error message:
libtool: link: cannot find the
On 6/9/06, Frank Steinborn <[EMAIL PROTECTED]> wrote:
Hello,
can someone tell what the right choice for CPUTYPE in /etc/make.conf
is for that CPU?
CPUTYPE?=pentium2
CFLAGS+= -mtune=prescott
COPTFLAGS+= -mtune=prescott
I find that this produces faster, and safer, code then
-march=pentium4, et
On 6/9/06, Frank Steinborn <[EMAIL PROTECTED]> wrote:
Hello,
can someone tell what the right choice for CPUTYPE in /etc/make.conf
is for that CPU?
CPUTYPE?=pentium2
CFLAGS+= -mtune=prescott
COPTFLAGS+= -mtune=prescott
I find that this produces faster, and safer, code then
-march=pentium4, et
On 6/9/06, Erik Norgaard <[EMAIL PROTECTED]> wrote:
Pat Maddox wrote:
> 12.34.56.78 runs a server on port 1234
> 87.65.43.21 should connect to this
>
> Both of them have PF rulesets that block off most traffic, keeping
> open the publically available ports I need open. In this case though,
> any
On Fri, Jun 09, 2006 at 03:01:14PM -0400, Wayne wrote:
> Hi,
>
> Was wondering how to get "man" to output pages in plain text? I want
> the basic formating (indentation & whatnot) but NOT the bold and other
> special effects. Just ascii text I can grep through. I tried setting
> the terminal
The modem is answering the call. However, it looks like the ppplogin
script is not being called. No information for tun1 is showing up in the
log file.
Permissions on ppplogin are 650 and the owners are root:network.
If I run ppplogin from the command line, tun1 information shows up in the
log
On 2006-06-09 20:34, Freminlins <[EMAIL PROTECTED]> wrote:
> Hello,
> I've always steered clear of using Sendmail (prefering Exim),
> but I thought I would give it a try and am having real
> difficulties with something I think should be simple.
Setting up an email server is not really a simple thi
Freminlins wrote:
I want to keep running Exim on port 25. I want Sendmail to run on a
different port. So I am trying to use the "O DaemonPortOptions=Port=2525"
option. However, I have 6 cf files in /etc/mail - freebsd.cf,
For quite some time now, it has been strongly suggested that you DO NOT
Hello,
I've always steered clear of using Sendmail (prefering Exim), but I thought
I would give it a try and am having real difficulties with something I think
should be simple.
I want to keep running Exim on port 25. I want Sendmail to run on a
different port. So I am trying to use the "O Daem
On Jun 9, 2006, at 3:01 PM, Wayne wrote:
Was wondering how to get "man" to output pages in plain text? I
want the basic formating (indentation & whatnot) but NOT the bold
and other special effects. Just ascii text I can grep through. I
tried setting the terminal type to "dumb" and the stu
On Fri, Jun 09, 2006 at 03:01:14PM -0400, Wayne wrote:
> Was wondering how to get "man" to output pages in plain text? I want
> the basic formating (indentation & whatnot) but NOT the bold and other
> special effects. Just ascii text I can grep through. I tried setting
> the terminal type to
Hi,
Was wondering how to get "man" to output pages in plain text? I want
the basic formating (indentation & whatnot) but NOT the bold and other
special effects. Just ascii text I can grep through. I tried setting
the terminal type to "dumb" and the stupid thing still tries to do
back-space
You have to use modem "AT" commands to tell FreeBSD modem to answer
in coming calls.
I complete detailed write up on 'user ppp' for answering incoming
calls can be found in the install guide at www.a1poweruser.com.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behal
> -Original Message-
> From: Kevin Kinsey [mailto:[EMAIL PROTECTED]
> Sent: Friday, June 09, 2006 1:29 PM
> To: [EMAIL PROTECTED]
> Cc: freebsd-questions@freebsd.org
> Subject: Re: Move hard drive
>
>
> Darryl Hoar wrote:
> > Greetings,
> > I am running FreeBSD 6.0 - release on a box. I
Darryl Hoar wrote:
Greetings,
I am running FreeBSD 6.0 - release on a box. I have setup several
applications, etc. I did this on computer A. Computer B is a
production machine and didn't want it offline while I figured out
all the niggly bits. Can I take the SCSI disk from A and put in
in
2006/6/9, Andrea Venturoli <[EMAIL PROTECTED]>:
Hello.
Sorry, this has probably been discussed hundreds of time, but I can't
seem to get any new stuff: I have a 6.1/i386 system with an USB keyboard.
It will work on BIOS boot-stage, and after the kernel is loaded, but it
won't work during loader
I am trying to setup a remote FreeBSD server to allow me to dial in and
check the network in case the WAN link goes does. I accomplished this
with 5.3, and cannot figure out what I am doing wrong on FBSD 6.0. I am
dialing using WIndows XP to establish a PPP connection
I am using the second metho
Hi list,
I'm updating the Free 5.3 to Free 6.1. I've used the
sequence:
cvsup -g -L 2 freebsd.sup
mergemaster -p
mergemaster
cd /usr/src
make buildworld
make installworld
cd /usr/src/sys/i386/conf
config MYKERNEL
make cleandepend
make depend
make
make install
make clean
portupgrade -a -m BATCH=y
>
> Greetings,
> I am running FreeBSD 6.0 - release on a box. I have setup several
> applications, etc. I did this on computer A. Computer B is a
> production machine and didn't want it offline while I figured out
> all the niggly bits. Can I take the SCSI disk from A and put in
> in B ?
Greetings,
I am running FreeBSD 6.0 - release on a box. I have setup several
applications, etc. I did this on computer A. Computer B is a
production machine and didn't want it offline while I figured out
all the niggly bits. Can I take the SCSI disk from A and put in
in B ? I did not custo
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception. Inev
How to get the best results from FreeBSD questions.
===
Last update $Date: 2005/08/10 02:21:44 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that a
On Friday 09 June 2006 11:48, Frank Steinborn wrote:
> John Nielsen wrote:
> > You probably want:
> > CPUTYPE?=pentium4
>
> If I put a ? after CPUTYPE, buildworld won't use CPUTYPE, correct? Is
> it better to do so, or is it safe to use "CPUTYPE=pentium4"?
Incorrect. The ? means that if the CPUTY
On Wed, Apr 19, 2006 at 02:10:07AM -0700, Ian A. Tegebo wrote:
> I couldn't find anything in the handbook, freebsddiary, or the mailing
> lists about maintaining your own ports within Ports.
I'm replying to my own post to inform anyone else who's interested to go
look look in freebsd-ports under "c
Out of curiosity, does anyone run enterprisedb on FreeBSD?
I can see a version for Linux, but me and Linux don't even
say Hi on the street ;)
-Wash
http://www.netmeister.org/news/learn2quote.html
DISCLAIMER: See http://www.wananchi.com/bms/terms.php
--
+===
Hello everyone. I know FreeBSD 6.1's been out for a month already, but
anyway I think someone may find this useful:
http://mexinetica.com/~lanjoe9/freebsd/bsd_dvd_howto.html
I've made a page describing the steps needed to create a FreeBSD DVD
containing the whole contents of both ISOs and a scri
John Nielsen wrote:
> You probably want:
> CPUTYPE?=pentium4
If I put a ? after CPUTYPE, buildworld won't use CPUTYPE, correct? Is
it better to do so, or is it safe to use "CPUTYPE=pentium4"?
Thanks,
Frank
___
freebsd-questions@freebsd.org mailing list
On 2006-06-09 16:37, Andrey Slusar <[EMAIL PROTECTED]> wrote:
> Thu, 8 Jun 2006 02:08:53 +0300, Giorgos Keramidas wrote:
>
> > For the rest of the programs, like mail(1), my Sendmail setup sets
> > envelope-from to one of my valid outside-world addresses. This is
> > accomplished with the followi
On 6/6/2006 21:13, Roger Merritt seems to have typed:
> Everything
> starts on boot-up as it should -- except natd. I can start it manually from
> the command line after booting up and logging in and it works fine, but I
> can't tell what's going on that it's failing to start.
Try adding:
natd_
Hi,
I have problem to set up PIM and IGMP communication with pf on FreeBSD
6.1-RELEASE.
# pfctl -s state
self igmp 195.28.109.40 -> 224.0.0.2 SINGLE:NO_TRAFFIC
self igmp 195.28.109.40 -> 224.0.0.13 SINGLE:NO_TRAFFIC
self igmp 224.0.0.1 <- 195.28.109.25 NO_TRAFFIC:SINGLE
self
At 18:50 09.06.2006, Martin Tournoy wrote:
On Fri, 09 Jun 2006 14:40:06 -, Kyrre Nygard <[EMAIL PROTECTED]>
wrote:
Hello!
Just a wild thought here ...
After noticing how much simpler it is using tags, for instance
with my bookmarks at http://del.icio.us -- compared to hours of
frustratio
On Fri, 09 Jun 2006 14:40:06 -, Kyrre Nygard <[EMAIL PROTECTED]>
wrote:
Hello!
Just a wild thought here ...
After noticing how much simpler it is using tags, for instance
with my bookmarks at http://del.icio.us -- compared to hours of
frustration trying find the right combination of fol
On Friday 09 June 2006 09:20, Frank Steinborn wrote:
> can someone tell what the right choice for CPUTYPE in /etc/make.conf
> is for that CPU?
You probably want:
CPUTYPE?=pentium4
See /usr/share/examples/etc/make.conf for a full list.
> And, is it safe to build kernel and world with --march= too
Chuck Swiger wrote:
Andrea Venturoli wrote:
Just to clarify: running "fsck /" (read-only) in multiuser mode
takes less than a minute. fsck at boot takes approx. 50 times that
long!
...and yes, that difference is not reasonable. Are you using bgfsck
or not...?
Hm, what do you mean?
I'd gl
Hello!
Just a wild thought here ...
After noticing how much simpler it is using tags, for instance
with my bookmarks at http://del.icio.us -- compared to hours of
frustration trying find the right combination of folders and
sub folders in my Firefox' bookmarks.html, I was wondering
if the same
Hello.
I had a 6.0/i386 box with a Matrox card.
Sometimes I used to run some game which went fullscreen with almost no
problems.
After I upgraded to 6.1 doing so will instantly freeze my system, and as
soon as I press any key it will reboot. Nothings gets into the logs.
Any hint?
bye & Th
Hello.
Sorry, this has probably been discussed hundreds of time, but I can't
seem to get any new stuff: I have a 6.1/i386 system with an USB keyboard.
It will work on BIOS boot-stage, and after the kernel is loaded, but it
won't work during loader stage, preventing me to enter single user mode
Justin T. Wert wrote:
To Whom It May Concern:
Are there any plans to release a DVD version of all 3 of your
media CDs combined? I tried searching the web on how to combine the media
into one DVD, but have failed to find a site that has a working method. My
personal attempts have t
Thu, 8 Jun 2006 02:08:53 +0300, Giorgos Keramidas wrote:
> For the rest of the programs, like mail(1), my Sendmail setup sets
> envelope-from to one of my valid outside-world addresses. This is
> accomplished with the following in my `sendmail.mc' file:
> dnl Trusted users, who are allowed t
Hello,
can someone tell what the right choice for CPUTYPE in /etc/make.conf
is for that CPU?
And, is it safe to build kernel and world with --march= too?
Thanks,
Frank
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/list
Hello,
Can someone help me? Any input would be welcome.
I am Setting up a new mail server for hundreds of users.
Running:
FreeBSD 6.1-STABLE
LASTEST version of qmail & vpopmail
I can't get ridge of this error:
maxproc limit exceeded by uid 89, please see tuning(7) and login.conf(5).
maxproc li
It's working like a champ now. Thanks everybody for the help.
Rich Mayo
SRI International
x76435
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Jonathan Chen
> Sent: Thursday, June 08, 2006 3:47 PM
> To: Mayo, Richard A RDECOM CERDEC STCD S
Thnx,
Company already bought it :/ I try to get mwavem pkg to test it.
In ports I found why I not find pkg:
[EMAIL PROTECTED] /usr/ports/comms/mwavem]# make
===> mwavem-fbsd-1.2_2 is marked as broken: "Does not compile (bad C
code)".
*** Error code 1
Stop in /usr/ports/comms/mwavem.
How I
Hello,
I've two FreeBSD 6.1-RELEASE routers (R1, R2) with CARP configured
and it was working OK untill I've installed Xorp and tried to configure
multicast PIM-SM. After that the CARP has stoped working. I've found
out by the tcpdump that after Xorp is started the source IP address
of CARP pac
Nick wrote:
thanks for help Alex I found the best way for me to write info to the
tape.
Can You answered on the last question How can I see free size on the
tape or size what I filled?
My experience is that you can't really do either. If anyone know
better, I'd be glad to know!
If the ta
Pat Maddox wrote:
12.34.56.78 runs a server on port 1234
87.65.43.21 should connect to this
Both of them have PF rulesets that block off most traffic, keeping
open the publically available ports I need open. In this case though,
any traffic over this port should only be between these two machin
On 2006-06-08 23:15, Andrey Slusar <[EMAIL PROTECTED]> wrote:
>Thu, 8 Jun 2006 02:08:53 +0300, Giorgos Keramidas wrote:
>[...]
>> I use mutt, which has an option to set the envelope-from address:
>
>> set envelope_from=yes# set the envelope-from address from From:
>
>> For the rest of the p
Hello :)
I wish to add the FreeBSD news in my site
but I can't transform the RDF document:
http://www.freebsd.org/news/news.rdf
I have a little knowledge in XML XSL but it seems that isn't enough :)
here is my XSL script:
===
htt
At 02:13 PM 6/9/2006 +1000, you wrote:
I've been doing a little hunting around to figure out
how /etc/rc.d/natd's called in the first place and it seems
this is done by the /etc/rc.d/ipfw script, which in turn is run
when "firewall_enable" is set
in /etc/rc.conf. /etc/rc.d/natd's not run directl
On Thu, Jun 08, 2006 at 06:40:01PM -0400, Michael P. Soulier wrote:
> [EMAIL PROTECTED] ~]# ls -d /usr/ports/databases/mysql*server
> /usr/ports/databases/mysql323-server/ /usr/ports/databases/mysql50-server/
> /usr/ports/databases/mysql40-server//usr/ports/databases/mysql51-server/
> /usr/po
justin schlingmann wrote:
Hello,
I`m trying to install freebsd 6.1 from an iso i fetched from
ftp.uk.freebsd.org.
I get the following meassage:
WARNING: a geometry of 77545/16/63 for ad0 is incorrect uing a more likely
geometry.
If this geometry is incorrect or you are unshure wether or not it`
Fri, 9 Jun 2006 00:39:42 -0500, Nikolas Britton wrote:
> On 6/8/06, Andrey Slusar <[EMAIL PROTECTED]> wrote:
> > Wed, 7 Jun 2006 16:56:25 -0400, Dave wrote:
> > > Hello,
> > >I was wondering if this was possible? I've got a box that i'd like
> > > to install the latest gnome 2.14 desktop on, as
Çäðàâñòâóéòå, Alex.
Âû ïèñàëè 8 èþíÿ 2006 ã., 17:18:59:
> Nick wrote:
>>The tape is new and empty and I don't know what way is more likely for
>>me may be You can give me Your advice what way I should choose for
>>copy my information daily?
>>
>>
> (You should copy freebsd-questions@FreeBSD.or
71 matches
Mail list logo
