@Rugxulo
"You said JEMMEX was used. (But you can probably do without NOINVLPG
NOVME unless literally using an old 386.) Are you sure you need EMM386
(or EMS) at all?"
- This was a good question... Obviously my thinking was stucked on something
I believed to be true on -90:eens when I last
I might have descriped the main problem unclearly...
So, when in Autocad drawing editor, most commands are responded quickly
enough. But in drawing regeneration (object vector rendering, (floating
point)) the behaviour is distinctive. If left alone this work progresses
but is so slow that it is
Lainaus Christopher Evans :
* A mis-set or conflicting interrupt. Are you sharing modem and soundcard
* irqs?
* -chris
- There is no modem in this computer (separate radio-modem in router
connected by ethernet cable. This far I have used internet connection in
Slitaz only in this machine)
- I
Lainaus Eric Auer :
*
* Hi! You misunderstood me... USB is SLOWER than PS/2, so my
* recommendation was to use PS/2 keyboard and mouse! But you
* had those already.
*
* If you switch off legacy USB support in the BIOS, you must
* use PS/2 keyboard for your BIOS setup again. Because, as
* you notic
Hi! You misunderstood me... USB is SLOWER than PS/2, so my
recommendation was to use PS/2 keyboard and mouse! But you
had those already.
If you switch off legacy USB support in the BIOS, you must
use PS/2 keyboard for your BIOS setup again. Because, as
you noticed, USB keyboard will not work if y
A mis-set or conflicting interrupt. Are you sharing modem and soundcard
irqs?
--
-chris
Computer Consultant & Repair Tech
Digitalatoll Solutions Group (Tawhaki Software)
http://digitalatoll.com/
http://tawakisoft.com/
Cell: 916-612-6904
Webpages, Email hosting, Cloud FTP Hosting, and Custom pro
@ Eric Auer :
* Maybe your BIOS is configured to support "legacy USB" methods
* to let DOS access USB keyboard or mouse without USB drivers?
* In that case, the BIOS can spend quite a lot of time to deal
* with the USB controller. Try using USB keyboard and mouse. To
* be on the safe side, leave
Hi :-)
> - Sorry, somewhat new terms to me, need to study a bit... INVLPG seems
> to be assembler command..? Anyway this machine is pentium, about 10years
> old. I have GRUB dualboot FreeDOS/Slitaz 4.0 Not fast but everything
> works (except Autocad issues..)
Older Pentium may have limited pe
Lainaus Rugxulo :
* Hi,
*
* On Sat, May 24, 2014 at 10:44 AM, wrote:
* >
* > After a long pause (since late 90:eens) I started again
* > with Autocad. R9 for DOS which I consider the best ever made
* > in 2D/2.5D CAD. (that is mainly explained by excellent
* > digitizer tablet use)
* > S
Hi,
On Sat, May 24, 2014 at 10:44 AM, wrote:
>
> After a long pause (since late 90:eens) I started again
> with Autocad. R9 for DOS which I consider the best ever made
> in 2D/2.5D CAD. (that is mainly explained by excellent
> digitizer tablet use)
> Shortly... it works. JEMM386 was need
Here is my FDCONFIG.SYS
Now I realized I was using JEMMEX, not JEMM386... if
that matters?
Rauno Ollila
!COUNTRY=001,858,C:\FDOS\BIN\COUNTRY.SYS
!SET DOSDIR=C:\FDOS
!LASTDRIVE=Z
!BUFFERS=20
!FILES=40
!MENUCOLOR=7,0
MENUDEFAULT=1,5
MENU 1 - Load FreeDOS w
After a long pause (since late 90:eens) I started again
with Autocad. R9 for DOS which I consider the best ever made
in 2D/2.5D CAD. (that is mainly explained by excellent
digitizer tablet use)
Shortly... it works. JEMM386 was needed, without it
Autocad was somewhat unreliable, it crashed o
12 matches
Mail list logo