with respect
to what reference?
You rotate around a point with the x and y coordinates 0.
The blue dot shows the point with the coordinates 0. The green dot is
rotated around this point.
\starttext
\startMPcode
drawdot (0,0) withpen pencircle scaled 5mm withcolor blue;
draw fullsquare scaled (4cm
et/Command/convertnumber
Any "command" options accepts the name of a macro, "numbercommand" needs
a macro with one parameter; don't try to call a macro here.
For the dot after the number, I'm not sure, try "sectionstopper={.}".
Hraban
Am 22.08.24 um
Hi,
If you change
drawdot (0,0) withpen pencircle scaled 8pt withcolor red;
into
drawdot (6pt,6pt) withpen pencircle scaled 8pt withcolor red ;
you get what you want (at least for the red dot on the lower left corner).
Here 6pt = 2pt (with of the pen used for the frame) + 4pt (half the
converted to PDF again
with Ghostscript (attaching the PostScript file isn’t possible because
of file size). Opened in Okular or other Poppler based viewers you’ll
see a dot instead of the fraction bar (which gets infinitely smaller
while zooming-in), and openend in Firefox, MuPDF or Acrobat
o can
drive viewers
we went from epson dot matrix printer -> early 300 dpi laser -> 600 dpi
laser printer -> high speed oce 512 dpi printer (metric) -> high speed
oce 600 dpi printer (+ crappy canon color laser printer) -> fast
page-wide hp color inkjet office printer
in mkii
justment
> > https://www.w3.org/TR/jlreq/#term.line-adjustment
> > • aligning of the lines to the Kihon-hanmen (optimizing the code below in
> > this regard)
> > • positioning and realm of headings https://www.w3.org/TR/jlreq/#fig3_1_9
> > https://www.w3.org/TR/jlreq/#f
igning of the lines to the Kihon-hanmen (optimizing the code below in
> > this regard)
> > • positioning and realm of headings https://www.w3.org/TR/jlreq/#fig3_1_9
> > https://www.w3.org/TR/jlreq/#fig3_1_15 et al, and
> > https://www.w3.org/TR/jlreq/#fig3_1_4
> > • p
rg/TR/jlreq/#fig2_3_24
> • inline cutting note (warichu) https://www.w3.org/TR/jlreq/#fig2_4_1
> • emphasis with sesame dot or bullet
> • itemization https://www.w3.org/TR/jlreq/#fig2_5_6
> • indenting of quotation paragraphs
> https://www.w3.org/TR/jlreq/#f
/jlreq/#fig2_3_24
*
inline cutting note (warichu) https://www.w3.org/TR/jlreq/#fig2_4_1
*
emphasis with sesame dot or bullet
*
itemization https://www.w3.org/TR/jlreq/#fig2_5_6
Circled numbered are easy and achieved by adding additional number
conversions.
*
indenting of quotation
_3_24
*
inline cutting note (warichu) https://www.w3.org/TR/jlreq/#fig2_4_1
*
emphasis with sesame dot or bullet
*
itemization https://www.w3.org/TR/jlreq/#fig2_5_6
*
indenting of quotation paragraphs
https://www.w3.org/TR/jlreq/#fig2_5_7
*
tab setting https://www.w3.org/TR/
/#fig2_3_24
inline cutting note (warichu) https://www.w3.org/TR/jlreq/#fig2_4_1
emphasis with sesame dot or bullet
itemization https://www.w3.org/TR/jlreq/#fig2_5_6
indenting of quotation paragraphs https://www.w3.org/TR/jlreq/#fig2_5_7
tab setting https://www.w3.org/TR/jlreq/#fig2_6_1
furiwake https
, 2024 at 15:51 (+), Rogers, Michael K wrote:
> Hi Jim,
> I think you want alternative “a”, if the dot instead of a letter is the
> problem and not the whitespace:
> %%
> \starttext
> This is a short paragraph.
> This is a line before a {\bf packed, joinedup} i
Hi Jim,
I think you want alternative “a”, if the dot instead of a letter is the problem
and not the whitespace:
%%
\starttext
This is a short paragraph.
This is a line before a {\bf packed, joinedup} itemization.
\startitemize[a,packed,joinedup]
\item First item.
\item Second item
MiKTeX and
TeX Live allow Windows-style specification of folders in environment variables,
it is best to use UNIX-style (TeX usually expects and prefers directories to be
separated by "/" rather "\" because the backslash is its control character).
Furthermore, "//"
Fabrice Couvreur schrieb am 27.07.2023 um 20:56:
Hi,
I don't understand why the distance between the dot and the first
letter of the text is not always the same (see with theorem).
Add
stretch=0,
shrink=0,
to your enumeration setup.
Wol
Hi,
I don't understand why the distance between the dot and the first letter of
the text is not always the same (see with theorem).
Thanks
Fabrice
\setupenumerations
[before={\blank},
after={\blank},
alternative=serried,
distance=1cm,
title=yes,
titleleft=,
title
ucket.org/phg/context-mirror/commits/
> wiki : https://contextgarden.net
> ___
>
--
[From the operation manual for the CI-300 Dot Matrix Line Printer, made
in Japan]:
The excellent output machine of MODEL C
ms remain (e.g.
breve, check, dot, widehat). It also affects the sizing of limiters and
e.g. underbraces.
Why do font fallbacks for non-math fonts affect math at all?
Hraban
___
If your question is of interest to
gger via ntg-context wrote:
>> Hello Hraban,
>> thank you. I missed this point. However, adding a dot behind the number does
>> not appear to solve the problem. The title’s text still starts at the left
>> margin which looks very odd.
>> Kind regards
>> Willi
>&
On 3/26/2023 3:10 PM, Willi Egger via ntg-context wrote:
Hello Hraban,
thank you. I missed this point. However, adding a dot behind the number does
not appear to solve the problem. The title’s text still starts at the left
margin which looks very odd.
Kind regards
Willi
On 26 Mar 2023, at
Hello Hraban,
thank you. I missed this point. However, adding a dot behind the number does
not appear to solve the problem. The title’s text still starts at the left
margin which looks very odd.
Kind regards
Willi
> On 26 Mar 2023, at 12:51, Henning Hraban Ramm via ntg-context
>
.”
https://wiki.contextgarden.net/Command/writetolist
So maybe you need a dot?
Otherwise I don’t know.
Hraban
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context
tributions should be sent by email to the Program
Committee:
prog-2023 at gust.org.pl.
The Program Committee is chaired by Bogusław Jackowski
(b_jackowski at gust dot org dot pl).
For other conference details see http://gust.org
around
>>> the math axis, as explained in the article. For instance in the following
>>> example
>>>
>>> \setupbodyfont[lucidaot,12pt]
>>> \starttext
>>> \startformula
>>> f(x) := -(u|x) := - \langle u, x \rangle
>>> \stopformula
\startformula
f : A \longrightarrow B
\stopformula
\stoptext
it seems to me that the lower dot (or square…) in the semicolumn of the first
formula (in front of the equal sign) is lower than in the second formula.
Best regards: Otared
Thank you for the kind words, Otared,
Regarding the colons
rangle
> \stopformula
> \stopformula
> \startformula
> f : A \longrightarrow B
> \stopformula
> \stoptext
>
> it seems to me that the lower dot (or square…) in the semicolumn of the first
> formula (in front of the equal sign) is lower than in the second formula.
>
>
. For instance in the following example
\setupbodyfont[lucidaot,12pt]
\starttext
\startformula
f(x) := -(u|x) := - \langle u, x \rangle
\stopformula
\stopformula
\startformula
f : A \longrightarrow B
\stopformula
\stoptext
it seems to me that the lower dot (or square…) in the semicolumn of the
not to use this connector, producing unexpected results.
\startformula
\mathboxanchored[nucleus]{c1}{e}^{\dot\alpha}
\mathboxanchored[nucleus]{c2}{e}_{\mu}
\mathboxanchored[nucleus]{c3}{e}^{\beta} = \frac{1}{\sqrt{2}}
\bar\sigma^{\dot\alpha\beta}_{\mu}
\stopformula
\stopboxanchor
lts.
\startformula
\mathboxanchored[nucleus]{c1}{e}^{\dot\alpha}
\mathboxanchored[nucleus]{c2}{e}_{\mu}
\mathboxanchored[nucleus]{c3}{e}^{\beta} = \frac{1}{\sqrt{2}}
\bar\sigma^{\dot\alpha\beta}_{\mu}
\stopformula
\stopboxanchoring
\stoptext
anchors-002-copy.pdf
Description: Adobe
ds of connections!
Gavin
\starttext
\startboxanchoring[+]
\connectboxanchors[top][top][distance=1ex,arrow=no] {c1}{c2}
\connectboxanchors[bottom] [bottom] [distance=1ex,arrow=no] {c2}{c3}
\startformula
\mathboxanchored[nucleus]{c1}{e}^{\dot\alpha}
%\mathboxanchored[nucleus]{c2}{e}
]
{\tt áéíóúijrf}
\scale[width=\textwidth]
{\hw áéíóúijrf}
\scale[width=\textwidth]
{\cg áéíóúijrf}
\stopTEXpage
\stoptext
'mono=1' misplaces the dot in i and j and the accent in i (all to the
left). It also misses bottom lines in i, r and f. And it also misses the
upper left s
article-basic]
\starttext
\startboxanchoring[+]
\connectboxanchors[top][top][distance=1ex,arrow=no] {c1}{c2}
\connectboxanchors[bottom] [bottom] [distance=1ex,arrow=no] {c2}{c3}
\startformula
\mathboxanchored[nucleus]{c1}{e}_{\alpha}
\mathboxanchored[nucleus]{c2}{e}^{\mu}
=1ex] {d1}{d2}
\startformula
\mathboxanchored[nucleus]{c1}{e}_{\alpha}
\mathboxanchored[nucleus]{c2}{e}^{\mu}
\mathboxanchored[nucleus]{d1}{todo}
\mathboxanchored[nucleus]{d2}{e}_{\dot{\beta}} = \frac{1}{\sqrt{2}}
\sigma_{\alpha,\dot{\beta}}^{\mu}
\stopformula
\stopboxanchoring
\mathboxanchored{X}{e}_\alpha \mathboxanchored{Y}{e}^\mu
\mathboxanchored{Z}{e}_{\dot\beta}
= \textfrac{1}{\sqrt{2}}\sigma_{\alpha\dot\beta}^\mu
\stopformula
I added code to turn the arrow produced by \connectboxanchors into my
contraction overlay, but that doesn’t affect these issues.
> in you
of Penrose and Rindler in
their 1985 books “Spinors and Space-time.” In the typesetting example above,
the e_\alpha and e_{\dot\beta} are basis spinors (one left-handed, one
right-handed). The e^\mu is the Infeld-van der Waerden symbol relating the spin
basis to the coordinate basis. The connect
inors rather than tensors, following the methods of Penrose and Rindler in
their 1985 books “Spinors and Space-time.” In the typesetting example above,
the e_\alpha and e_{\dot\beta} are basis spinors (one left-handed, one
right-handed). The e^\mu is the Infeld-van der Waerden symbol relating the
> On 25 Sep 2022, at 14:30, Gavin via ntg-context wrote:
>
> Hello list,
>
> I have a few questions about space produced by the unit command. Consider
> this MWE
>
> \starttext
> \unit{3.00e8 kg m/s}
>
> $\unit{3.00e8 kg m/s}$
> \stoptext
>
>
space produced by the unit command. Consider
>> this MWE
>> \starttext
>> \unit{3.00e8 kg m/s}
>> $\unit{3.00e8 kg m/s}$
>> \stoptext
>> The dot between “kg” and “m” has different spacing depending on whether the
>> \unit command is in text or math mode.
On 9/25/2022 3:30 PM, Gavin via ntg-context wrote:
Hello list,
I have a few questions about space produced by the unit command. Consider this
MWE
\starttext
\unit{3.00e8 kg m/s}
$\unit{3.00e8 kg m/s}$
\stoptext
The dot between “kg” and “m” has different spacing depending on whether the
Hello list,
I have a few questions about space produced by the unit command. Consider this
MWE
\starttext
\unit{3.00e8 kg m/s}
$\unit{3.00e8 kg m/s}$
\stoptext
The dot between “kg” and “m” has different spacing depending on whether the
\unit command is in text or math mode. I think that the
]
[cache=yes,
readcommand=\ReadFigure,
output={\externalfilterbasefile.pdf},
filtercommand={dot -Tpdf -o "\externalfilterbasefile.pdf"
"\externalfilterinputfile"}]
\starttext
\startTEXpage
\startgraphviz
digraph G {
main -> parse -> execute;
main -&
Dear all,
I have a legacy project that I shall convert to a new ConTeXt project.
There are a lot of Graphviz dot-files. What shall I do with these?
Any hints?
juh
--
Autoren-Homepage: . http://literatur.hasecke.com
Satiren & Essays: . http://www.sudelbuch.de
Privater
pañol]
\placeRussian
\stoptitle
\stoptext
Regarding the implementation: I've just tried it, and I wondered whether the
stacking of bars should not happen the other way round. As in
\underbar{\underdot{asdf}}
I would have expected the bar to be below the dot. But maybe that's wron
other way round. As in
\underbar{\underdot{asdf}}
I would have expected the bar to be below the dot. But maybe that's wrong
expectations...
Denis
> -Ursprüngliche Nachricht-
> Von: ntg-context Im Auftrag von Hans Hagen
> via ntg-context
> Gesendet: Dienstag, 30. Novemb
alternate, but only partially.
>
> > \definefont
> >[SomeFont]
> >[name:iosevka*default:test]
> > \starttext
> > \SomeFont
> > I live in a dot-heavy world.
> > \stoptext
> >
> > has six dots instead of
\definefontfeature
[default:test]
[default]
[cv36=2,cv26=6]
What is the number supposed to indicate ? It is not an alternate, right?
\definefont
[SomeFont]
[name:iosevka*default:test]
\starttext
\SomeFont
I live in a dot-heavy world
=6]
\definefont
[SomeFont]
[name:iosevka*default:test]
\starttext
\SomeFont
I live in a dot-heavy world.
\stoptext
has six dots instead of one dot over each "i". Tests with multiple other
font shapers and inspection of the font file confirmed that t
1. If a *shin *with a *sin *dot (שׂ) is pointed with a *holam *(the
vowel point placed high and on the left), then the *shin*, *sin *dot,
and *holam *are combined into a single ligature that depicts the *sin *dot
and *holam *merged into a single point.
2. If a *shin *with a *shin *d
Hi Wolfgang,
Thank you for this nice solution.
Fabrice
Le mar. 27 juil. 2021 à 21:31, Wolfgang Schuster via ntg-context <
ntg-context@ntg.nl> a écrit :
> Fabrice Couvreur via ntg-context schrieb am 27.07.2021 um 18:57:
> > Hi,
> > The name of the environment must always end
Fabrice Couvreur via ntg-context schrieb am 27.07.2021 um 18:57:
Hi,
The name of the environment must always end with a dot both with a title
and without title. How to do ?
Thanks
Fabrice
[...]
You can create simple dummy environments to test the parameters.
\defineenumeration
Hi,
The name of the environment must always end with a dot both with a title
and without title. How to do ?
Thanks
Fabrice
\setupenumerations
[before={\blank},
after={\blank},
alternative=serried,
title=yes,
titleleft={(},
titleright={)},
titlestyle=normal,
titlecommand
o have
% no features to invoke arbitrary other programs, and no known
% exploitable bugs. All to the best of our knowledge. They also have
% practical use for being called from TeX.
%
shell_escape_commands = \
bibtex,bibtex8,\
extractbb,\
gregorio,\
kpsewhich,\
makeindex,\
repstopdf,\
r-mpost,\
texo
are seven patterns involved in hyphenating
the word applicable: 4p1, 1p2l2, pli2c1ab, 1ca, ca1bl, b2l2, and b4le.
(the final dot is part of that last pattern). The pattern responsible
for the break applic-able is pli2c1ab. If we now refer to the source
repository for hyphenation patterns (since com
comma below ş
hook ȥ
ring above å
ring below ḁ
dot above ṁ
middle dot ŀ
dot below ṃ
breve ă
inverted breve ȃ
caron ǩ
stroke ø
Best, Richard
-Original Message-
From: Hans Hagen
Reply-To: mailing list for ConTeXt
Dear list, Rare cases only but I thought it’d worth reporting this difference I could not understand.Could reproduce this problem with a simple MWE below. Kerning between ‘v’ and dot is doubled if \feature macro is used. Thanks \definefontfeature[xvicentury][mode=node]\definefontfeature[default
Hi Hans,
Thanks for the new upload.
With your comments, I understand that, following the discussion with Aditya,
when using the new version I should not define in Metafun a new function named
dotlabel
in order to have a square dot… Actually I called it mydotlabel in order to be
able to
On 12/10/2020 8:37 PM, Aditya Mahajan wrote:
On Thu, 10 Dec 2020, Hans Hagen wrote:
dotlabel uses a pen to draw the dot, and I am not sure why it uses that rather
than a path. Here is a (to me) simpler definition, where you can change the
shape:
just look in the pdf ... in your case the dot
On Thu, 10 Dec 2020, Hans Hagen wrote:
> > dotlabel uses a pen to draw the dot, and I am not sure why it uses that
> > rather
> > than a path. Here is a (to me) simpler definition, where you can change the
> > shape:
>
> just look in the pdf ... in your case t
On 12/10/2020 6:44 PM, Aditya Mahajan wrote:
On Thu, 10 Dec 2020, Otared Kavian wrote:
Hi all,
In Metafun when representing a point I woul dlike to have some dots represented
by a square (or even by another scalable symbol): for instance in the following
I would like the dot at the point B
oint I woul dlike to have some dots
>> represented by a square (or even by another scalable symbol): for instance
>> in the following I would like the dot at the point B to be a square:
>>
>> \starttext
>> \startMPcode
>> draw (2cm,3cm) -- (3cm,5cm) ;
>>
On Thu, 10 Dec 2020, Otared Kavian wrote:
> Hi all,
>
> In Metafun when representing a point I woul dlike to have some dots
> represented by a square (or even by another scalable symbol): for instance in
> the following I would like the dot at the point B to be a square:
Hi all,
In Metafun when representing a point I woul dlike to have some dots represented
by a square (or even by another scalable symbol): for instance in the following
I would like the dot at the point B to be a square:
\starttext
\startMPcode
draw (2cm,3cm) -- (3cm,5cm) ;
dotlabel(textext
Hi Julian,
The tilde ~ in {\bf\ss #1.~#2} is only there to have an unbreakable fixed space
between the dot and the first character of the chapter title. Also in this way
one can see that one has put a space there… :-)
Best tegards: Otared
On 2 Sep 2020, at 23:29, jbf wrote:
Thanks Otared,
On 6/16/2020 11:13 PM, James Withers wrote:
Many thanks Hans. That has made the dots appear. If possible I would
like to use the dot from the same font, especially if using a font
where full stops are diamond shaped rather than circular.
Is there any way to map the dot from the external font so
Many thanks Hans. That has made the dots appear. If possible I would
like to use the dot from the same font, especially if using a font
where full stops are diamond shaped rather than circular.
Is there any way to map the dot from the external font so that it can
be used by the \dotfill command
where
each pair in teh path is also drawn as a dot and maybe teh directions drawn as
small arrows.
Does someone have such a beast lying around?
G
___
If your question is of interest to others as well, please add an
I would like to be able (during development) to draw paths where the points of
the path (and maybe thing slike directions) are visualised. E.g. a path where
each pair in teh path is also drawn as a dot and maybe teh directions drawn as
small arrows.
Does someone have such a beast lying around
cement of the dot in this example, and how
> can I avoid it?
>
> \starttext
> \startTEXpage[offset=3bp]
> $E_tE_s=E_{\min(t,s)}$.
>
> \switchtobodyfont[stixtwo]$E_tE_s=E_{\min(t,s)}$.
>
> \switchtobodyfont[lucidaot]$E_tE_s=E_{\min(t,s)}$.
> \stopTEXpage
>
Hi,
what is going on with the placement of the dot in this example, and how can
I avoid it?
\starttext
\startTEXpage[offset=3bp]
$E_tE_s=E_{\min(t,s)}$.
\switchtobodyfont[stixtwo]$E_tE_s=E_{\min(t,s)}$.
\switchtobodyfont[lucidaot]$E_tE_s=E_{\min(t,s)}$.
\stopTEXpage
\stoptext
Output attached
rrect.
2. Shin dot and sin dot (05C1-05C2) should be next, but Unicode places them
in combining classes 24 and 25, after the characters in recommended classes
3-5 and many of the characters in recommended class 6.
3. Dagesh / mapiq (05BC) should be next, but Unicode assigns it a combining
class
is typically located at $HOME/.vim/vimrc (note that the filename
does *not* start with a dot, only the directory's name does).
Good ConTeXt typesetting in Vim!
Nicola
___
If your question is of interest to ot
On 2/5/2020 11:00 AM, Henning Hraban Ramm wrote:
Am 2020-02-05 um 10:24 schrieb Hans Hagen :
On 2/4/2020 8:27 PM, kaddour kardio wrote:
Since ConTeXT is closer to plain TeX than LaTeX, it is more legitimate to got the
"dot tex" than latex :)
I always wonder where such info
> Am 2020-02-05 um 10:24 schrieb Hans Hagen :
>
> On 2/4/2020 8:27 PM, kaddour kardio wrote:
>> Since ConTeXT is closer to plain TeX than LaTeX, it is more legitimate to
>> got the "dot tex" than latex :)
> I always wonder where such info comes fro
LaTeX, it is more legitimate
> > to got the "dot tex" than latex :)
> >
> > Le mar. 4 févr. 2020 à 17:57, Pablo Rodriguez > <mailto:oi...@gmx.es>> a écrit :
> >
> > On 2/3/20 3:28 PM, Hans Hagen wrote:
> > > On 2/3/2020 3:07 P
On 2/4/2020 8:27 PM, kaddour kardio wrote:
Since ConTeXT is closer to plain TeX than LaTeX, it is more legitimate
to got the "dot tex" than latex :)
I always wonder where such info comes from. Plain tex is a 45K file that
is described in the tex book and serves as template for Don
On 2/4/2020 8:27 PM, kaddour kardio wrote:
Since ConTeXT is closer to plain TeX than LaTeX, it is more legitimate
to got the "dot tex" than latex :)
Le mar. 4 févr. 2020 à 17:57, Pablo Rodriguez <mailto:oi...@gmx.es>> a écrit :
On 2/3/20 3:28 PM, Hans Hagen wrote:
> Am 2020-02-04 um 20:27 schrieb kaddour kardio :
>
> Since ConTeXT is closer to plain TeX than LaTeX, it is more legitimate to got
> the "dot tex" than latex :)
I’d suggest to start a war to claim it…
HR
Since ConTeXT is closer to plain TeX than LaTeX, it is more legitimate to
got the "dot tex" than latex :)
Le mar. 4 févr. 2020 à 17:57, Pablo Rodriguez a écrit :
> On 2/3/20 3:28 PM, Hans Hagen wrote:
> > On 2/3/2020 3:07 PM, Philipp A. wrote:
> >> Hi!
> >&
Hi list!
Thank you for helping to answer so many questions and remove so many
roadblocks with my project. The result is a photobook written in
Markdown, piped through pandoc to generate ConTeXt code, then stylized
using a series of .tex files.
The coolest ConTeX part, IMO, is the orange dot in
ined there.
which version
3. Is it possible to indent not only the section name but also the
number in the TOC? Moreover, I would like to have a dot after the first
three levels, but not the other ones (in the TOC and in the text), like
this:
A. First Level .. 1
module. I have looked into m-subsub.mkiv and
saw no difference at all between the different levels defined there.
3. Is it possible to indent not only the section name but also the
number in the TOC? Moreover, I would like to have a dot after the first
three levels, but not the other ones (in the
On 11/13/2019 9:20 PM, Mikael P. Sundqvist wrote:
Hi,
The following example used to work.
But with an LMTX updated today, the numbering \eqref produces is (11)
instead of the expected (1.1). The numbering in the equation itself is fine.
Did something change on purpose?
/Mikael
%%% TEST FIL
Hi,
The following example used to work.
But with an LMTX updated today, the numbering \eqref produces is (11)
instead of the expected (1.1). The numbering in the equation itself is fine.
Did something change on purpose?
/Mikael
%%% TEST FILE
\definereferenceformat[eqref][left=(,right=)]
\star
sqrt(x))",
xlabels = "yes",
ylabels = "yes",
ycaption = "\strut\tfd \rotate[rotation=90]{vertical}",
xcaption = "\strut\tfd horizontal",
pointsymbol = "dot", pointsize = 4, pointcolor = "orange",
sx = 2mm, sy
% yticks = "left", ysmall = 40, ylarge = 4,
code = "1.5 * math.sin(2*x^2)",
xlabels = "yes",
ylabels = "yes",
ycaption = "\strut\tfd \rotate[rotation=90]{vertical}",
xcaption = "\strut\tfd horizon
quot;, ysmall = 40, ylarge = 4,
code = "1.5 * math.sin(2*x^2)",
xlabels = "yes",
ylabels = "yes",
ycaption = "\strut\tfd \rotate[rotation=90]{vertical}",
xcaption = "\strut\tfd horizontal",
pointsymbol = &q
ylarge = 4,
code = "1.5 * math.sin(2*x^2)",
xlabels = "yes",
ylabels = "yes",
ycaption = "\strut\tfd \rotate[rotation=90]{vertical}",
xcaption = "\strut\tfd horizontal",
pointsymbol = "dot",
you have some suggestions in regard to fonts which cover
those diacritics well?
When using LaTeX, accents were just handled by putting e.g. dot over
'm'. Any hint how to easily enter such things in one's editor?
Now, I wonder how can one "define one's own sort order" si
gt; curved stroke between two letters.
Thanks Benct, but the little dot I think I see (actually a square
shape) does not look like that.
>Googling "eyelash repha" I found this:
>
> http://unicode.org/~emuller/iwg/p8/utcdoc.html
The source st
missing “accent” is a repha, a form of the consonant ra. It seems
> > to have been replaced by a middle dot, to the right of the base
> > consonant. I can’t be completely sure because it’s protruding into the
> > next consonant so it’s almost indistinguishable from it, but I think
&
e older (perfect) output is in a comment above
>> https://github.com/u-fischer/luaotfload/issues/9#issuecomment-426978522
>
> The missing “accent” is a repha, a form of the consonant ra. It seems
> to have been replaced by a middle dot, to the right of the base
> consonant
the older (perfect) output is in a comment above
> https://github.com/u-fischer/luaotfload/issues/9#issuecomment-426978522
The missing “accent” is a repha, a form of the consonant ra. It seems
to have been replaced by a middle dot, to the right of the base
consonant. I can’t be completely sure be
t can do it. The B
with dot below (U+1E04) ends as BU+0323 in the pdf. But how does
context does it?
It uses the Unicode composition information (part of UnicodeData.txt),
they’re made into a Lua table in ConTeXt (named char-def.lua, if it
hasn’t changed).
I know of char-def.lua but the questio
Am Thu, 23 Feb 2017 17:20:05 +0100 schrieb Arthur Reutenauer:
>> I looked at the code and it actually uses an idea that I had already
>> tried. The problem I couldn't solve was do decompose a glyph.
>> Looking at an context example it seems that context can do it. The B
&g
> I looked at the code and it actually uses an idea that I had already
> tried. The problem I couldn't solve was do decompose a glyph.
> Looking at an context example it seems that context can do it. The B
> with dot below (U+1E04) ends as BU+0323 in the pdf. But how does
> co
lve was do decompose a glyph.
Looking at an context example it seems that context can do it. The B
with dot below (U+1E04) ends as BU+0323 in the pdf. But how does
context does it? It doesn't happen with a similar latex example.
There the U+1E04 is simply missing.
And why is the dot of the first B bet
lve was do decompose a glyph.
Looking at an context example it seems that context can do it. The B
with dot below (U+1E04) ends as BU+0323 in the pdf. But how does
context does it? It doesn't happen with a similar latex example.
There the U+1E04 is simply missing.
And why is the dot of the firs
On 2/23/2017 3:05 PM, Ulrike Fischer wrote:
Am Thu, 23 Feb 2017 14:08:54 +0100 schrieb Hans Hagen:
btw, i suppose most context enter composed glyphs anyway instead of
separate thingies
But as my example (for the B with dot below) shows that this fails
if the font hasn't the precomposed
Am Thu, 23 Feb 2017 14:08:54 +0100 schrieb Hans Hagen:
> btw, i suppose most context enter composed glyphs anyway instead of
> separate thingies
But as my example (for the B with dot below) shows that this fails
if the font hasn't the precomposed glyph.
Also the problem is not
ed B+U+0323 for the B.
>>
>> With context (and lualatex) one get a rather bad looking -- as the
>> dot is misplaced -- output for the A0323 input and no output at
>> all for 1e04.
>>
>> As the coverage for precomposed glyphs varies a lot across fonts
>> t
1 - 100 of 566 matches
Mail list logo