Sorry for digging up an old thread!
Is there a way to store username/password on a Touch for remote
connection to LMS? I would like to avoid entering username and passwd
when I connect
Thanks
Readynas Ultra 2 Plus - LMS 7.8 with BrutefirDRC 2.0 - filter from
Audiolense 4.13 - Touch (EDO and Sq
guidof wrote:
> Hmm. many thanks for the suggestion. May try this if Benchmark offers no
> fix (I've contacted them).
>
> Guido F.
I agree it would be best if Benchmark can help you out. Do you know
which USB chipset is used in your DAC?
Readynas Ultra 2 Plus - LMS 7.8 with BrutefirDRC 2.0 -
guidof wrote:
> I have a Benchmark DAC 2 D, fed by a Squeezebox Touch with the EDO
> extender. When used in coax mode, the DAC automatically switches to the
> appropriate resolution, depending on what comes down the pike. Not
> always so when used in USB mode. When that happens, I need to cycle t
I've got my Touch working with a Stello U3. This uses an XMOS USB chip.
My configuration of the Touch is different though as I use Squeezelite
as a player (and no Touch GUI). I have plans to upgrade my D-Premier to
a 240 this spring and hope that the Devialet USB input will work with my
Touch. I h
Zombie wrote:
> And where do I find the "required drivers + alsa" and how/where do I
> install them?
> Thanks.
I'm afraid you must go to the Readynas forum
http://www.readynas.com/forum/ with those questions.
OGS's Profil
Zombie wrote:
> I have tried to install several different squeezelite files on my Ultra
> 2, but it won't install. I triend installing from the ReadyNAS setup in
> a web browser...
> Do you know which one is the right one and how to go about with it?
The procedure to install squeezelite itself o
Ynnek4 wrote:
> Thanks for the replies guys. I just put my order in. I have heard you
> can potentially upgrade the RAM so that may be an option as well.
>
> Very excited to finally ditch my desktop!
Sorry to be late to this thread.. I've used an Ultra 2 Plus with LMS 7.8
for a long time. Wor
Turnandcough wrote:
> PC is a quad core Q9550 with 4gb RAM and plenty of free hard drive
> space.
> I think I'm going to flush TT3.0 AGAIN and give EDO by itself a try.
With this much CPU power LMS should run fine on Windows. Streaming
192kHz FLAC as PCM from one of my Linux boxes only uses arou
Turnandcough wrote:
> I too was under the impression that EDO was capable of streaming 24/192
> FLAC. My server is nothing fancy, just a basic PC running XP SP3
> connected via ethernet.
> I have no problems streaming 16/44 or 24/96 FLAC files. Actually I
> don't really have any interest in 24/
Turnandcough wrote:
>
> 24/192 file:
> access: MMAP_INTERLEAVED
> format: S24_LE
> subformat: STD
> channels: 2
> rate: 96000 (96000/1)
> period_size: 1024
> buffer_size: 4096
>
Seems like your LMS is down sampling. Touch may be reporting 96kHz as
max to LMS for some reason. Try reinstalling t
Turnandcough wrote:
> Sorry I just edited my post - I meant EDO + 7.8 As I mentioned earlier
> I finally got Touch firmware to catch up to server software.
>
> I just tried a 24-192 file sent natively to the Touch and it worked. I
> then tried another from HD Tracks and it didn't. 24-192 PCM to
The Intel Atom D525 Dual Core should be more than enough for a Vortexbox
installation. I have run this on a D510 (Shuttle XS35) with good
results. I am quite sure XP would also run fine, but I have not tried
this.
--
OGS
Readynas Ultra 2 Plus - SBS with BrutefirDRC - filter from Audiolense
g the next months.
Olav
--
OGS
Readynas Ultra 2 Plus - SBS with BrutefirDRC - filter from Audiolense
4.1XO - Touch (bypassed output caps and soundcheck's mods) - Rotel
RB-960BX (mod) - KEF Q300
OGS'
en go for a Vortexbox.
--
OGS
Readynas Ultra 2 Plus - SBS with BrutefirDRC - filter from Audiolense
4.1XO - Touch (bypassed output caps and soundcheck's mods) - Rotel
RB-960BX (mod) - KEF Q300
OGS'
fer tweak (4000) really made a huge difference.
--
OGS
Readynas Ultra 2 Plus - SBS with BrutefirDRC - filter from Audiolense
4.1XO - Touch (bypassed output caps and soundcheck's mods) - Rotel
RB-960BX (mod) - KEF Q300
he limitations
in jive_alsa John S just described.
+---+
|Filename: alsa_name.zip|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=11443|
+------
logies, LLC
Thanks, good to know that a firmware update solves this.
Olav
--
OGS
Vortexbox - BrutefirDRC with filter from Audiolense 4.0 - Touch
(bypassed output caps) - Rotel RB-1060 (mod) - KEF Q300
OGS's Profile:
perfectly in my setup. I'll test the Streamer II+ tomorrow
and report back.
Olav
--
OGS
Vortexbox - BrutefirDRC - Touch (bypassed output caps) - Rotel RB-1060
(mod) - KEF Q300
OGS's Profile: http://forums.slimd
Thanks very much John. Exactly what I was hoping for. I will try with
the II+ and Pro models in addition to the II this evening.
Olav
--
OGS
Vortexbox - BrutefirDRC - Touch (bypassed output caps) - Rotel RB-1060
(mod) - KEF Q300
ven the
newest version of the II, but then I guess I'd need John's special
built firmware.
Olav
--
OGS
Vortexbox - BrutefirDRC - Touch (bypassed output caps) - Rotel RB-1060
(mod) - KEF Q300
OGS's Profi
ass: 0
subdevices_count: 1
subdevices_avail: 1
--
OGS
Vortexbox - Touch (bypassed output caps) - Rotel RB-1060 (mod) - Tannoy
Sensys DC1 (mod)
OGS's Profile: http://forums.slimdevices.com/member.php?user
nd rotten. I've bypassed them so I know. This may very
well be the reason for the OP's SBT's sounding different.
--
OGS
Vortexbox - Touch (bypassed output caps) - Rotel RB-1060 (mod) - Tannoy
Sensys DC1 (mod)
y. I hope
a version of alsa with async support will find it's way into the Touch
firmware some time, but Logitech seems reluctant.
--
OGS
Vortexbox - Touch (bypassed output caps) - Rotel RB-1060 (mod) - Tannoy
Sensys DC1 (mod)
-
m
worked well. As Touch lacks lsusb I do not quite know how to check how
the Streamers are registered in the Touch.
Is your driver a separate binary with a config file or will it have to
be compiled into a firmware to work?
--
OGS
Vortexbox - Touch (bypassed output caps) - Rotel R
Hi John,
further up this thread you say that the Touch will switch to
asynchronous mode with for example the Ayre QB-9. Which Touch firmware
is needed to achieve this?
--
OGS
Vortexbox - Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys
DC1 (mod
Transporter is
anywhere near the QB-9's, but I have not heard any of then so couldn't
tell. What I do know is that a Touch and a Music Streamer II+ is only
$600 retail for both.
--
OGS
Vortexbox - Touch - Tact RCS 2
this sound quality via the
Touch??
--
OGS
Vortexbox - Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys
DC1 (mod)
OGS's Profile: http://forums.slimdevices.com/member.php?userid=32981
View this thread: http://
s". I have not read any
definitive definitions of "audiophile", but I doubt yours would qualify.
If you like to talk rubbish I'll leave you to it...
--
OGS
Vortexbox - Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys
DC1 (mod)
--
he down side is that I loose the Tact room correction in this
configuration so I'm testing BrutefirDRC at the moment.
--
OGS
Vortexbox - Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys
DC1 (mod)
OGS's Profil
amer USB DAC, the Ayre or one of the other asynchronous USB dacs?
You should before you state things like this
--
OGS
Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys DC1
OGS's Profile: http://forums.slim
ll look out for the special test version from Andy then, thanks John.
--
OGS
Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys DC1
OGS's Profile: http://forums.slimdevices.com/member.php?userid=32981
View this th
er to
do proper asynchronous USB. Is this a module or compiled into the
kernel? Would it be possible for you to let us try it?
--
OGS
Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys DC1
OGS's Pro
nnect with polyprop caps in series with the signal. The
improvement is quite dramatic in some respects.
--
OGS
SB2 (mod) - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys DC1
OGS's Profile: http://forums.slimdevices
..that is what I use in my current setup, but I have friends that will
be using the analog out and it is really nice to know that I won't have
to worry about cheap electrolytics in the signal path. Thanks for the
info Phil.
--
OGS
SB2 (mod) - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy S
.. is there a DC-blocking electrolytic on the audio output of the DAC?
AKM's diagram indicate that it may be possible to do without the
electrolytic which would be great!
I've pre-ordered my Touch today and I am really looking forward to swap
my SB 2 with the new wonder.
--
OGS
35 matches
Mail list logo
