Re: v17 conundrum in design
Been there done that Regards Chuck Chuck Miller Voice: (617) 739-0306 Informed Solutions, Inc. Fax: (617) 232-1064 mailto:cjmillerinformed-solutions.com Brookline, MA 02446 USA Registered 4D Developer Providers of 4D and Sybase connectivity http://www.informed-solutions.com This message and any attached documents contain information which may be confidential, subject to privilege or exempt from disclosure under applicable law. These materials are intended only for the use of the intended recipient. If you are not the intended recipient of this transmission, you are hereby notified that any distribution, disclosure, printing, copying, storage, modification or the taking of any action in reliance upon this transmission is strictly prohibited. Delivery of this message to any person other than the intended recipient shall not compromise or waive such confidentiality, privilege or exemption from disclosure as to this communication. > On Feb 11, 2019, at 11:47 AM, Jim Hays via 4D_Tech <4d_tech@lists.4d.com> > wrote: > > Chuck, > > I've seen some cases where I put a break point in a method that was called > repeatedly. I would click on the break point to remove it in the debugger, > but it would still stop there. > I solved it by: > - click to remove the break point > - click again, adding it back > - click again to remove it ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
Chuck, I've seen some cases where I put a break point in a method that was called repeatedly. I would click on the break point to remove it in the debugger, but it would still stop there. I solved it by: - click to remove the break point - click again, adding it back - click again to remove it Odd, but it worked and I didn't feel like figuring out why that happened. Jim On Sun, Feb 10, 2019 at 5:30 PM ADeeg via 4D_Tech <4d_tech@lists.4d.com> wrote: > 4D Tech mailing list wrote > > Hi All, > > > > I have an object method that shows no break points either in the method > or > > when I show break points, yet it continues to stop at a particular line > of > > code and it is annoying. Any ideas out there what it might be. > > > > Thanks and regards > > Chuck > > Chuck does the code at this line contains the line split Charakter to split > a long code line into several short lines? > > Sometimes my code stop at this line when they pasted from other sources > > Armin > > > > -- > Sent from: http://4d.1045681.n5.nabble.com/4D-Tech-f1376241.html > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
4D Tech mailing list wrote > Hi All, > > I have an object method that shows no break points either in the method or > when I show break points, yet it continues to stop at a particular line of > code and it is annoying. Any ideas out there what it might be. > > Thanks and regards > Chuck Chuck does the code at this line contains the line split Charakter to split a long code line into several short lines? Sometimes my code stop at this line when they pasted from other sources Armin -- Sent from: http://4d.1045681.n5.nabble.com/4D-Tech-f1376241.html ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
I worked on a project that did this too. In that case it turned out to be an error in some old ALP code. Something subtle like a mistyped variable. You may have a component or plugin that's generating the error silently. On Thu, Feb 7, 2019 at 12:52 PM Chuck Miller via 4D_Tech < 4d_tech@lists.4d.com> wrote: > I have an object method that shows no break points either in the method or > when I show break points, yet it continues to stop at a particular line of > code and it is annoying. Any ideas out there what it might be. > -- Kirk Brooks San Francisco, CA === What can be said, can be said clearly, and what you can’t say, you should shut up about *Wittgenstein and the Computer * ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
Using the Runtime Explorer window, ave you tried clicking "Delete All" for Break and Catch, even if no breaks or catches are listed? > On Feb 7, 2019, at 3:39 PM, Chuck Miller via 4D_Tech <4d_tech@lists.4d.com> > wrote: > > no break points either in the method or when I show break points, yet it > continues to stop at a particular line of code and it is annoying ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
Chuck, I have encountered this a few times since at least v15 (now using v17.0 HF3). The only way I found to clear it is to - create a new method - copy the code across - delete old method I found it impossible to “make it happen” for a reproducible bug for 4D, though I did report it anyway (a long time ago). My biggest “problem” with v17HF3 on Win7 is its habit of ignoring new beak points after a while when debugging - what a massive pain… (i have reported it) I have to restart 4D and then it respects the breakpoints already set on startup. I hope this has been fixed but haven’t seen any mention in later version bug fixes. I have not seen anyone else mention it so maybe it only affects me. But I digress… HTH, Keith > I have an object method that shows no break points either in the method or > when I show break points, yet it continues to stop at a particular line of > code and it is annoying... ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
No it is not and I have quite and restarted many times Regards Chuck Chuck Miller Voice: (617) 739-0306 Informed Solutions, Inc. Fax: (617) 232-1064 mailto:cjmillerinformed-solutions.com Brookline, MA 02446 USA Registered 4D Developer Providers of 4D and Sybase connectivity http://www.informed-solutions.com This message and any attached documents contain information which may be confidential, subject to privilege or exempt from disclosure under applicable law. These materials are intended only for the use of the intended recipient. If you are not the intended recipient of this transmission, you are hereby notified that any distribution, disclosure, printing, copying, storage, modification or the taking of any action in reliance upon this transmission is strictly prohibited. Delivery of this message to any person other than the intended recipient shall not compromise or waive such confidentiality, privilege or exemption from disclosure as to this communication. > On Feb 8, 2019, at 3:23 AM, Koen Van Hooreweghe via 4D_Tech > <4d_tech@lists.4d.com> wrote: > > Hi Chuck, > > Is it happening on a line of code which is split up in several lines ('\')? > I've seen this happening a number of times. Mainly quitting and restarting 4D > is enhough to solve this issue. You might try to remove the slash chars, set > a breakpoint at the remaining line and remove it right away and then split > your line again. > > HTH > Koen > >> Op 7 feb. 2019, om 21:39 heeft Chuck Miller via 4D_Tech >> <4d_tech@lists.4d.com> het volgende geschreven: >> >> I have an object method that shows no break points either in the method or >> when I show break points, yet it continues to stop at a particular line of >> code and it is annoying. Any ideas out there what it might be. > > > > > Compass bvba > Koen Van Hooreweghe > Kloosterstraat 65 > 9910 Aalter > Belgium > tel +32 495 511.653 > > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
Hi Chuck, Is it happening on a line of code which is split up in several lines ('\')? I've seen this happening a number of times. Mainly quitting and restarting 4D is enhough to solve this issue. You might try to remove the slash chars, set a breakpoint at the remaining line and remove it right away and then split your line again. HTH Koen > Op 7 feb. 2019, om 21:39 heeft Chuck Miller via 4D_Tech > <4d_tech@lists.4d.com> het volgende geschreven: > > I have an object method that shows no break points either in the method or > when I show break points, yet it continues to stop at a particular line of > code and it is annoying. Any ideas out there what it might be. Compass bvba Koen Van Hooreweghe Kloosterstraat 65 9910 Aalter Belgium tel +32 495 511.653 ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
Chuck I experienced this behavior from time to time since v16r2 (and maybe even v15) I believe can happen when 2 or more instances of 4D are running at the same time Last time was yesterday (macOS) I restarted my Mac and everything came back to normality Cordialmente, Alberto > El 07-02-2019, a las 17:39, Chuck Miller via 4D_Tech <4d_tech@lists.4d.com> > escribió: > > Hi All, > > I have an object method that shows no break points either in the method or > when I show break points, yet it continues to stop at a particular line of > code and it is annoying. Any ideas out there what it might be. > > Thanks and regards > Chuck > > > Chuck Miller Voice: (617) 739-0306 > Informed Solutions, Inc. Fax: (617) 232-1064 > mailto:cjmillerinformed-solutions.com > Brookline, MA 02446 USA Registered 4D Developer > Providers of 4D and Sybase connectivity > http://www.informed-solutions.com > > This message and any attached documents contain information which may be > confidential, subject to privilege or exempt from disclosure under applicable > law. These materials are intended only for the use of the intended > recipient. If you are not the intended recipient of this transmission, you > are hereby notified that any distribution, disclosure, printing, copying, > storage, modification or the taking of any action in reliance upon this > transmission is strictly prohibited. Delivery of this message to any person > other than the intended recipient shall not compromise or waive such > confidentiality, privilege or exemption from disclosure as to this > communication. > > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
Thanks Steve, I do not think so and the debugger comes up on a NON alp line Regards Chuck Chuck Miller Voice: (617) 739-0306 Informed Solutions, Inc. Fax: (617) 232-1064 mailto:cjmillerinformed-solutions.com Brookline, MA 02446 USA Registered 4D Developer Providers of 4D and Sybase connectivity http://www.informed-solutions.com This message and any attached documents contain information which may be confidential, subject to privilege or exempt from disclosure under applicable law. These materials are intended only for the use of the intended recipient. If you are not the intended recipient of this transmission, you are hereby notified that any distribution, disclosure, printing, copying, storage, modification or the taking of any action in reliance upon this transmission is strictly prohibited. Delivery of this message to any person other than the intended recipient shall not compromise or waive such confidentiality, privilege or exemption from disclosure as to this communication. > On Feb 7, 2019, at 4:53 PM, Stephen J. Orth via 4D_Tech > <4d_tech@lists.4d.com> wrote: > > Do you have ALP's auto-trace logic turned on? It is a nice feature that > opens the debugger if ALP encounters a problem, which may be what you are > seeing. ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
RE: v17 conundrum in design
Chuck, Do you have ALP's auto-trace logic turned on? It is a nice feature that opens the debugger if ALP encounters a problem, which may be what you are seeing. Steve * Stephen J. Orth The Aquila Group, Inc. Office: (608) 834-9213 P.O. Box 690 Mobile: (608) 347-6447 Sun Prairie, WI 53590 E-Mail: s.o...@the-aquila-group.com * -Original Message- From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of Charles Miller via 4D_Tech Sent: Thursday, February 7, 2019 3:24 PM To: 4D iNug Technical <4d_tech@lists.4d.com> Cc: Charles Miller Subject: Re: v17 conundrum in design Nope it is filling arrays and then updating ALP. After tabbing out of query field Chuck On Thu, Feb 7, 2019 at 4:15 PM Chip Scheide via 4D_Tech < 4d_tech@lists.4d.com> wrote: > Chuck > look for a hard break (TRACE) > either in a called component, plugin or method called via EXECUTE > FORMULA > > On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote: > > Chuck > > also I get this sometimes when there is break in a method which is > > called via EXECUTE FORMULA especially if the method is called during > > screen drawing (On display > > detail) > > > > Chip > > a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via > > 4D_Tech wrote: > >> Hi All, > >> > >> I have an object method that shows no break points either in the > >> method or when I show break points, yet it continues to stop at a > >> particular line of code and it is annoying. Any ideas out there > >> what it might be. > >> > >> Thanks and regards > >> Chuck > >> > >> > > > > -- > -- > >> Chuck Miller Voice: (617) 739-0306 Informed Solutions, Inc. Fax: > >> (617) 232-1064 mailto:cjmillerinformed-solutions.com > >> Brookline, MA 02446 USA Registered 4D Developer > >>Providers of 4D and Sybase connectivity > >> http://www.informed-solutions.com > >> > > > > -- > -- > >> This message and any attached documents contain information which > >> may be confidential, subject to privilege or exempt from disclosure > >> under applicable law. These materials are intended only for the > >> use of the intended recipient. If you are not the intended > >> recipient of this transmission, you are hereby notified that any > >> distribution, disclosure, printing, copying, storage, modification > >> or the taking of any action in reliance upon this transmission is > >> strictly prohibited. Delivery of this message to any person other > >> than the intended recipient shall not compromise or waive such > >> confidentiality, privilege or exemption from disclosure as to this > >> communication. > >> > >> *** > >> *** > >> 4D Internet Users Group (4D iNUG) > >> Archive: http://lists.4d.com/archives.html > >> Options: https://lists.4d.com/mailman/options/4d_tech > >> Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > >> *** > >> *** > > --- > > Gas is for washing parts > > Alcohol is for drinkin' > > Nitromethane is for racing > > > > ** > > 4D Internet Users Group (4D iNUG) > > Archive: http://lists.4d.com/archives.html > > Options: https://lists.4d.com/mailman/options/4d_tech > > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > > > > ** > --- > Gas is for washing parts > Alcohol is for drinkin' > Nitromethane is for racing > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** -- - Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064 Informed Solu
Re: v17 conundrum in design
Chuck: ALP will go into trace mode when there's an error in a plugin call. Common reasons for that happening - you've executed a plugin call that's a function but haven't added the code to receive the return value or moving code that was using a local ($eList) to code that is using, a process variable or a property in an object (grid.eList). Those are the two most common programming errors that would cause ALP to trigger the debugger. Simple test = comment out the ALP code if the debugger opens that means that was the offending line of code. -- Douglas von Roeder 949-336-2902 On Thu, Feb 7, 2019 at 1:41 PM Chip Scheide via 4D_Tech < 4d_tech@lists.4d.com> wrote: > is there a trace or break in the query? i.e. Query by Formula where > the formula is a method > > > On Thu, 7 Feb 2019 16:24:27 -0500, Charles Miller via 4D_Tech wrote: > > Nope it is filling arrays and then updating ALP. After tabbing out of > query > > field > > > > Chuck > > > > On Thu, Feb 7, 2019 at 4:15 PM Chip Scheide via 4D_Tech < > > 4d_tech@lists.4d.com> wrote: > > > >> Chuck > >> look for a hard break (TRACE) > >> either in a called component, plugin or method called via EXECUTE > >> FORMULA > >> > >> On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote: > >>> Chuck > >>> also I get this sometimes when there is break in a method which is > >>> called via EXECUTE FORMULA > >>> especially if the method is called during screen drawing (On display > >>> detail) > >>> > >>> Chip > >>> a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via > >>> 4D_Tech wrote: > Hi All, > > I have an object method that shows no break points either in the > method or when I show break points, yet it continues to stop at a > particular line of code and it is annoying. Any ideas out there what > it might be. > > Thanks and regards > Chuck > > > >>> > >> > >> > > > Chuck Miller Voice: (617) 739-0306 > Informed Solutions, Inc. Fax: (617) 232-1064 > mailto:cjmillerinformed-solutions.com > Brookline, MA 02446 USA Registered 4D Developer > Providers of 4D and Sybase connectivity > http://www.informed-solutions.com > > >>> > >> > >> > > > This message and any attached documents contain information which may > be confidential, subject to privilege or exempt from disclosure under > applicable law. These materials are intended only for the use of the > intended recipient. If you are not the intended recipient of this > transmission, you are hereby notified that any distribution, > disclosure, printing, copying, storage, modification or the taking of > any action in reliance upon this transmission is strictly > prohibited. Delivery of this message to any person other than the > intended recipient shall not compromise or waive such > confidentiality, privilege or exemption from disclosure as to this > communication. > > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** > >>> --- > >>> Gas is for washing parts > >>> Alcohol is for drinkin' > >>> Nitromethane is for racing > >>> ** > >>> 4D Internet Users Group (4D iNUG) > >>> Archive: http://lists.4d.com/archives.html > >>> Options: https://lists.4d.com/mailman/options/4d_tech > >>> Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > >>> ** > >> --- > >> Gas is for washing parts > >> Alcohol is for drinkin' > >> Nitromethane is for racing > >> ** > >> 4D Internet Users Group (4D iNUG) > >> Archive: http://lists.4d.com/archives.html > >> Options: https://lists.4d.com/mailman/options/4d_tech > >> Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > >> ** > > > > -- > > > > - > > Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064 > > Informed Solutions, Inc. > > Brookline, MA 02446 USA Registered 4D Developer > >Providers of 4D, Sybase & SQL Server connectivity > > http://www.informed-solutions.com > > > > - > > This message and any attached doc
RE: v17 conundrum in design
We call these phantom breakpoints. It's been a bug for so so long. The only way I have figured out how to fix it is to create a new User in Design -> Toolbox -> Users and begin to use the new user until the issue presents itself again. For what it's worth we started to notice them a lot when we start using the line separator character "\". I believe there have been taow tickets that have gone nowhere in the past. -Original Message- From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of Charles Miller via 4D_Tech Sent: Thursday, February 7, 2019 4:24 PM To: 4D iNug Technical <4d_tech@lists.4d.com> Cc: Charles Miller Subject: Re: v17 conundrum in design Nope it is filling arrays and then updating ALP. After tabbing out of query field Chuck On Thu, Feb 7, 2019 at 4:15 PM Chip Scheide via 4D_Tech < 4d_tech@lists.4d.com> wrote: > Chuck > look for a hard break (TRACE) > either in a called component, plugin or method called via EXECUTE > FORMULA > > On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote: > > Chuck > > also I get this sometimes when there is break in a method which is > > called via EXECUTE FORMULA especially if the method is called during > > screen drawing (On display > > detail) > > > > Chip > > a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via > > 4D_Tech wrote: > >> Hi All, > >> > >> I have an object method that shows no break points either in the > >> method or when I show break points, yet it continues to stop at a > >> particular line of code and it is annoying. Any ideas out there > >> what it might be. > >> > >> Thanks and regards > >> Chuck > >> > >> > > > > -- > -- > >> Chuck Miller Voice: (617) 739-0306 Informed Solutions, Inc. Fax: > >> (617) 232-1064 mailto:cjmillerinformed-solutions.com > >> Brookline, MA 02446 USA Registered 4D Developer > >>Providers of 4D and Sybase connectivity > >> http://www.informed-solutions.com > >> > > > > -- > -- > >> This message and any attached documents contain information which > >> may be confidential, subject to privilege or exempt from disclosure > >> under applicable law. These materials are intended only for the > >> use of the intended recipient. If you are not the intended > >> recipient of this transmission, you are hereby notified that any > >> distribution, disclosure, printing, copying, storage, modification > >> or the taking of any action in reliance upon this transmission is > >> strictly prohibited. Delivery of this message to any person other > >> than the intended recipient shall not compromise or waive such > >> confidentiality, privilege or exemption from disclosure as to this > >> communication. > >> > >> *** > >> *** > >> 4D Internet Users Group (4D iNUG) > >> Archive: http://lists.4d.com/archives.html > >> Options: https://lists.4d.com/mailman/options/4d_tech > >> Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > >> *** > >> *** > > --- > > Gas is for washing parts > > Alcohol is for drinkin' > > Nitromethane is for racing > > > > ** > > 4D Internet Users Group (4D iNUG) > > Archive: http://lists.4d.com/archives.html > > Options: https://lists.4d.com/mailman/options/4d_tech > > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > > > > ** > --- > Gas is for washing parts > Alcohol is for drinkin' > Nitromethane is for racing > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** -- - Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064 Informed Solutions, Inc. Brookline, MA 02446 USA Registered 4D Developer Prov
Re: v17 conundrum in design
is there a trace or break in the query? i.e. Query by Formula where the formula is a method On Thu, 7 Feb 2019 16:24:27 -0500, Charles Miller via 4D_Tech wrote: > Nope it is filling arrays and then updating ALP. After tabbing out of query > field > > Chuck > > On Thu, Feb 7, 2019 at 4:15 PM Chip Scheide via 4D_Tech < > 4d_tech@lists.4d.com> wrote: > >> Chuck >> look for a hard break (TRACE) >> either in a called component, plugin or method called via EXECUTE >> FORMULA >> >> On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote: >>> Chuck >>> also I get this sometimes when there is break in a method which is >>> called via EXECUTE FORMULA >>> especially if the method is called during screen drawing (On display >>> detail) >>> >>> Chip >>> a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via >>> 4D_Tech wrote: Hi All, I have an object method that shows no break points either in the method or when I show break points, yet it continues to stop at a particular line of code and it is annoying. Any ideas out there what it might be. Thanks and regards Chuck >>> >> >> Chuck Miller Voice: (617) 739-0306 Informed Solutions, Inc. Fax: (617) 232-1064 mailto:cjmillerinformed-solutions.com Brookline, MA 02446 USA Registered 4D Developer Providers of 4D and Sybase connectivity http://www.informed-solutions.com >>> >> >> This message and any attached documents contain information which may be confidential, subject to privilege or exempt from disclosure under applicable law. These materials are intended only for the use of the intended recipient. If you are not the intended recipient of this transmission, you are hereby notified that any distribution, disclosure, printing, copying, storage, modification or the taking of any action in reliance upon this transmission is strictly prohibited. Delivery of this message to any person other than the intended recipient shall not compromise or waive such confidentiality, privilege or exemption from disclosure as to this communication. ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com ** >>> --- >>> Gas is for washing parts >>> Alcohol is for drinkin' >>> Nitromethane is for racing >>> ** >>> 4D Internet Users Group (4D iNUG) >>> Archive: http://lists.4d.com/archives.html >>> Options: https://lists.4d.com/mailman/options/4d_tech >>> Unsub: mailto:4d_tech-unsubscr...@lists.4d.com >>> ** >> --- >> Gas is for washing parts >> Alcohol is for drinkin' >> Nitromethane is for racing >> ** >> 4D Internet Users Group (4D iNUG) >> Archive: http://lists.4d.com/archives.html >> Options: https://lists.4d.com/mailman/options/4d_tech >> Unsub: mailto:4d_tech-unsubscr...@lists.4d.com >> ** > > -- > - > Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064 > Informed Solutions, Inc. > Brookline, MA 02446 USA Registered 4D Developer >Providers of 4D, Sybase & SQL Server connectivity > http://www.informed-solutions.com > - > This message and any attached documents contain information which may be > confidential, subject to privilege or exempt from disclosure under > applicable law. These materials are intended only for the use of the > intended recipient. If you are not the intended recipient of this > transmission, you are hereby notified that any distribution, disclosure, > printing, copying, storage, modification or the taking of any action in > reliance upon this transmission is strictly prohibited. Delivery of this > message to any person other than the intended recipient shall not > compromise or waive such confidentiality, privilege or exemption > from disclosure as to this communication. > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsu
Re: v17 conundrum in design
Nope it is filling arrays and then updating ALP. After tabbing out of query field Chuck On Thu, Feb 7, 2019 at 4:15 PM Chip Scheide via 4D_Tech < 4d_tech@lists.4d.com> wrote: > Chuck > look for a hard break (TRACE) > either in a called component, plugin or method called via EXECUTE > FORMULA > > On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote: > > Chuck > > also I get this sometimes when there is break in a method which is > > called via EXECUTE FORMULA > > especially if the method is called during screen drawing (On display > > detail) > > > > Chip > > a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via > > 4D_Tech wrote: > >> Hi All, > >> > >> I have an object method that shows no break points either in the > >> method or when I show break points, yet it continues to stop at a > >> particular line of code and it is annoying. Any ideas out there what > >> it might be. > >> > >> Thanks and regards > >> Chuck > >> > >> > > > > > >> Chuck Miller Voice: (617) 739-0306 > >> Informed Solutions, Inc. Fax: (617) 232-1064 > >> mailto:cjmillerinformed-solutions.com > >> Brookline, MA 02446 USA Registered 4D Developer > >>Providers of 4D and Sybase connectivity > >> http://www.informed-solutions.com > >> > > > > > >> This message and any attached documents contain information which may > >> be confidential, subject to privilege or exempt from disclosure under > >> applicable law. These materials are intended only for the use of the > >> intended recipient. If you are not the intended recipient of this > >> transmission, you are hereby notified that any distribution, > >> disclosure, printing, copying, storage, modification or the taking of > >> any action in reliance upon this transmission is strictly > >> prohibited. Delivery of this message to any person other than the > >> intended recipient shall not compromise or waive such > >> confidentiality, privilege or exemption from disclosure as to this > >> communication. > >> > >> ** > >> 4D Internet Users Group (4D iNUG) > >> Archive: http://lists.4d.com/archives.html > >> Options: https://lists.4d.com/mailman/options/4d_tech > >> Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > >> ** > > --- > > Gas is for washing parts > > Alcohol is for drinkin' > > Nitromethane is for racing > > ** > > 4D Internet Users Group (4D iNUG) > > Archive: http://lists.4d.com/archives.html > > Options: https://lists.4d.com/mailman/options/4d_tech > > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > > ** > --- > Gas is for washing parts > Alcohol is for drinkin' > Nitromethane is for racing > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** -- - Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064 Informed Solutions, Inc. Brookline, MA 02446 USA Registered 4D Developer Providers of 4D, Sybase & SQL Server connectivity http://www.informed-solutions.com - This message and any attached documents contain information which may be confidential, subject to privilege or exempt from disclosure under applicable law. These materials are intended only for the use of the intended recipient. If you are not the intended recipient of this transmission, you are hereby notified that any distribution, disclosure, printing, copying, storage, modification or the taking of any action in reliance upon this transmission is strictly prohibited. Delivery of this message to any person other than the intended recipient shall not compromise or waive such confidentiality, privilege or exemption from disclosure as to this communication. ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
Chuck look for a hard break (TRACE) either in a called component, plugin or method called via EXECUTE FORMULA On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote: > Chuck > also I get this sometimes when there is break in a method which is > called via EXECUTE FORMULA > especially if the method is called during screen drawing (On display > detail) > > Chip > a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via > 4D_Tech wrote: >> Hi All, >> >> I have an object method that shows no break points either in the >> method or when I show break points, yet it continues to stop at a >> particular line of code and it is annoying. Any ideas out there what >> it might be. >> >> Thanks and regards >> Chuck >> >> > >> Chuck Miller Voice: (617) 739-0306 >> Informed Solutions, Inc. Fax: (617) 232-1064 >> mailto:cjmillerinformed-solutions.com >> Brookline, MA 02446 USA Registered 4D Developer >>Providers of 4D and Sybase connectivity >> http://www.informed-solutions.com >> > >> This message and any attached documents contain information which may >> be confidential, subject to privilege or exempt from disclosure under >> applicable law. These materials are intended only for the use of the >> intended recipient. If you are not the intended recipient of this >> transmission, you are hereby notified that any distribution, >> disclosure, printing, copying, storage, modification or the taking of >> any action in reliance upon this transmission is strictly >> prohibited. Delivery of this message to any person other than the >> intended recipient shall not compromise or waive such >> confidentiality, privilege or exemption from disclosure as to this >> communication. >> >> ** >> 4D Internet Users Group (4D iNUG) >> Archive: http://lists.4d.com/archives.html >> Options: https://lists.4d.com/mailman/options/4d_tech >> Unsub: mailto:4d_tech-unsubscr...@lists.4d.com >> ** > --- > Gas is for washing parts > Alcohol is for drinkin' > Nitromethane is for racing > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** --- Gas is for washing parts Alcohol is for drinkin' Nitromethane is for racing ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
Chuck also I get this sometimes when there is break in a method which is called via EXECUTE FORMULA especially if the method is called during screen drawing (On display detail) Chip a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via 4D_Tech wrote: > Hi All, > > I have an object method that shows no break points either in the > method or when I show break points, yet it continues to stop at a > particular line of code and it is annoying. Any ideas out there what > it might be. > > Thanks and regards > Chuck > > > Chuck Miller Voice: (617) 739-0306 > Informed Solutions, Inc. Fax: (617) 232-1064 > mailto:cjmillerinformed-solutions.com > Brookline, MA 02446 USA Registered 4D Developer >Providers of 4D and Sybase connectivity > http://www.informed-solutions.com > > This message and any attached documents contain information which may > be confidential, subject to privilege or exempt from disclosure under > applicable law. These materials are intended only for the use of the > intended recipient. If you are not the intended recipient of this > transmission, you are hereby notified that any distribution, > disclosure, printing, copying, storage, modification or the taking of > any action in reliance upon this transmission is strictly > prohibited. Delivery of this message to any person other than the > intended recipient shall not compromise or waive such > confidentiality, privilege or exemption from disclosure as to this > communication. > > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** --- Gas is for washing parts Alcohol is for drinkin' Nitromethane is for racing ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
I already did what you suggest to no avail. I even reccreated code but did use copy and paste On Thu, Feb 7, 2019 at 4:10 PM Chip Scheide via 4D_Tech < 4d_tech@lists.4d.com> wrote: > a break in a component, plug-in > > an oddity... > use runtime explorer to clear all break points > - if it still persists > try restart 4D > > I have seen this in earlier versions too > Chip > > On Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via 4D_Tech wrote: > > Hi All, > > > > I have an object method that shows no break points either in the > > method or when I show break points, yet it continues to stop at a > > particular line of code and it is annoying. Any ideas out there what > > it might be. > > > > Thanks and regards > > Chuck > > > > > > > > Chuck Miller Voice: (617) 739-0306 > > Informed Solutions, Inc. Fax: (617) 232-1064 > > mailto:cjmillerinformed-solutions.com > > Brookline, MA 02446 USA Registered 4D Developer > >Providers of 4D and Sybase connectivity > > http://www.informed-solutions.com > > > > > > This message and any attached documents contain information which may > > be confidential, subject to privilege or exempt from disclosure under > > applicable law. These materials are intended only for the use of the > > intended recipient. If you are not the intended recipient of this > > transmission, you are hereby notified that any distribution, > > disclosure, printing, copying, storage, modification or the taking of > > any action in reliance upon this transmission is strictly > > prohibited. Delivery of this message to any person other than the > > intended recipient shall not compromise or waive such > > confidentiality, privilege or exemption from disclosure as to this > > communication. > > > > ** > > 4D Internet Users Group (4D iNUG) > > Archive: http://lists.4d.com/archives.html > > Options: https://lists.4d.com/mailman/options/4d_tech > > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > > ** > --- > Gas is for washing parts > Alcohol is for drinkin' > Nitromethane is for racing > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** -- - Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064 Informed Solutions, Inc. Brookline, MA 02446 USA Registered 4D Developer Providers of 4D, Sybase & SQL Server connectivity http://www.informed-solutions.com - This message and any attached documents contain information which may be confidential, subject to privilege or exempt from disclosure under applicable law. These materials are intended only for the use of the intended recipient. If you are not the intended recipient of this transmission, you are hereby notified that any distribution, disclosure, printing, copying, storage, modification or the taking of any action in reliance upon this transmission is strictly prohibited. Delivery of this message to any person other than the intended recipient shall not compromise or waive such confidentiality, privilege or exemption from disclosure as to this communication. ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: v17 conundrum in design
a break in a component, plug-in an oddity... use runtime explorer to clear all break points - if it still persists try restart 4D I have seen this in earlier versions too Chip On Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via 4D_Tech wrote: > Hi All, > > I have an object method that shows no break points either in the > method or when I show break points, yet it continues to stop at a > particular line of code and it is annoying. Any ideas out there what > it might be. > > Thanks and regards > Chuck > > > Chuck Miller Voice: (617) 739-0306 > Informed Solutions, Inc. Fax: (617) 232-1064 > mailto:cjmillerinformed-solutions.com > Brookline, MA 02446 USA Registered 4D Developer >Providers of 4D and Sybase connectivity > http://www.informed-solutions.com > > This message and any attached documents contain information which may > be confidential, subject to privilege or exempt from disclosure under > applicable law. These materials are intended only for the use of the > intended recipient. If you are not the intended recipient of this > transmission, you are hereby notified that any distribution, > disclosure, printing, copying, storage, modification or the taking of > any action in reliance upon this transmission is strictly > prohibited. Delivery of this message to any person other than the > intended recipient shall not compromise or waive such > confidentiality, privilege or exemption from disclosure as to this > communication. > > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** --- Gas is for washing parts Alcohol is for drinkin' Nitromethane is for racing ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **