Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Chuck McCown 
Not in the office.   In a deposition.  

From: Faisal Imtiaz 
Sent: Thursday, October 05, 2017 10:43 AM
To: af@afmug.com 
Subject: Re: [AFMUG] Fw: AF11x adapters

Tried to call you.. but they said you were not there.. !


The snap adapter you have in the picture is the piece from the back side of the 
 AF11x
If you look at the picture I sent you.. that is of an AF11x mounting on the 
Jirous Adapter, after removing the snap adapter.

So the hole patterns of the flat side of the snap adapter will match exactly 
what is on the Radio ...

Regards.

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net




  From: "Chuck McCown" <ch...@wbmfg.com>
  To: af@afmug.com
  Sent: Thursday, October 5, 2017 12:24:10 PM
  Subject: Re: [AFMUG] Fw: AF11x adapters

  I think there is a difference in the hole pattern between the snap adapter 
and the radio.

  From: Faisal Imtiaz
  Sent: Thursday, October 05, 2017 10:20 AM
  To: af@afmug.com
  Subject: Re: [AFMUG] Fw: AF11x adapters

  Quick simple fix would be to create some sort of a stand-off and use longer 
screws to bolt the radio in place.

  Faisal Imtiaz
  Snappy Internet & Telecom
  7266 SW 48 Street
  Miami, FL 33155
  Tel: 305 663 5518 x 232

  Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net


--

From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: Thursday, October 5, 2017 12:09:49 PM
    Subject: Re: [AFMUG] Fw: AF11x adapters

I will supply them in all future shipments.

From: Gino A. Villarini
Sent: Thursday, October 05, 2017 10:08 AM
To: af@afmug.com
    Subject: Re: [AFMUG] Fw: AF11x adapters

Just clarified, the plastic adapter does not come with the radio, will need 
to retool base to use holes in metal adapter

From: Af <af-boun...@afmug.com> on behalf of Jeremy <jeremysmi...@gmail.com>
Reply-To: "af@afmug.com" <af@afmug.com>
Date: Thursday, October 5, 2017 at 11:33 AM
To: "af@afmug.com" <af@afmug.com>
Subject: Re: [AFMUG] Fw: AF11x adapters


They sell it in a set with the 11GHz Type-N cables.  Streakwave has some in 
stock.  AF-11CA $52



  Gino A. Villarini
 
  President 
  Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 



On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz <fai...@snappytelecom.net> 
wrote:

  Hmmm... in that case.. the question would be... How do you mount the 
radio to the Adapter plate.

  There needs to be a mateing adapter on your plate side... That piece only 
comes with the UBNT Dish...

  (you can pull up the UBNT 10ghz Dish Userguide to see that ...)

  Jiruos adapters that we used, required that piece to be removed from the 
AF11x so that it could be screwed in directly (as per my picture).  I was told 
that they were going to redesign so that they would have a mateing bracket on 
their side so that the AF11x would slide in.

  (You will also need to have to include cables to connect to AF11x to the 
Feed horn .. I am sure you already knew that).

  Regards

  Faisal Imtiaz
  Snappy Internet & Telecom
  7266 SW 48 Street
  Miami, FL 33155
  Tel: 305 663 5518 x 232

  Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net


--

From: ch...@wbmfg.com
    To: af@afmug.com
    Sent: Thursday, October 5, 2017 10:45:45 AM
Subject: Re: [AFMUG] Fw: AF11x adapters

No because my design presumes the adapter will be there to space the 
radio out away from the end of the waveguide transition.  Without that extra 
spacing the radio would crash into the end of the adapter.

From: Mathew Howard
    Sent: Thursday, October 5, 2017 8:42 AM
To: af
Subject: Re: [AFMUG] Fw: AF11x adapters

Wouldn't it work without the adapter anyway? If I'm remembering right, 
with the Jirous adapters, you take the snap adapter off and just bolt the radio 
directly to their mounting plate using the same holes... wouldn't that line up 
with your adapter too?


On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:

  If that plastic slide/snap adapter is included with each radio, then 
we should be good.
  I designed the spacing and everything assuming that adapter would be 
used with each unit.

  From: Faisal Imtiaz
      Sent: Thursday, October 5, 2017 8:28 AM
  To: af@afmug.com
  Subject: Re: [AFMUG] Fw: AF11x adapters

  Picture of the Jirous Adapter attached

  rest of the answ

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Faisal Imtiaz 
Tried to call you.. but they said you were not there.. ! 

The snap adapter you have in the picture is the piece from the back side of the 
AF11x 
If you look at the picture I sent you.. that is of an AF11x mounting on the 
Jirous Adapter, after removing the snap adapter. 

So the hole patterns of the flat side of the snap adapter will match exactly 
what is on the Radio ... 

Regards. 

Faisal Imtiaz 
Snappy Internet & Telecom 
7266 SW 48 Street 
Miami, FL 33155 
Tel: 305 663 5518 x 232 

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net 

> From: "Chuck McCown" <ch...@wbmfg.com>
> To: af@afmug.com
> Sent: Thursday, October 5, 2017 12:24:10 PM
> Subject: Re: [AFMUG] Fw: AF11x adapters

> I think there is a difference in the hole pattern between the snap adapter and
> the radio.
> From: Faisal Imtiaz
> Sent: Thursday, October 05, 2017 10:20 AM
> To: af@afmug.com
> Subject: Re: [AFMUG] Fw: AF11x adapters
> Quick simple fix would be to create some sort of a stand-off and use longer
> screws to bolt the radio in place.
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> Miami, FL 33155
> Tel: 305 663 5518 x 232

> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

>> From: "Chuck McCown" <ch...@wbmfg.com>
>> To: af@afmug.com
>> Sent: Thursday, October 5, 2017 12:09:49 PM
>> Subject: Re: [AFMUG] Fw: AF11x adapters

>> I will supply them in all future shipments.
>> From: Gino A. Villarini
>> Sent: Thursday, October 05, 2017 10:08 AM
>> To: af@afmug.com
>> Subject: Re: [AFMUG] Fw: AF11x adapters
>> Just clarified, the plastic adapter does not come with the radio, will need 
>> to
>> retool base to use holes in metal adapter
>> From: Af < af-boun...@afmug.com > on behalf of Jeremy < 
>> jeremysmi...@gmail.com >
>> Reply-To: " af@afmug.com " < af@afmug.com >
>> Date: Thursday, October 5, 2017 at 11:33 AM
>> To: " af@afmug.com " < af@afmug.com >
>> Subject: Re: [AFMUG] Fw: AF11x adapters
>> They sell it in a set with the 11GHz Type-N cables. Streakwave has some in
>> stock. AF-11CA $52

>> Gino A. Villarini
>> President
>> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

>> On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz < fai...@snappytelecom.net >
>> wrote:

>>> Hmmm... in that case.. the question would be... How do you mount the radio 
>>> to
>>> the Adapter plate.
>>> There needs to be a mateing adapter on your plate side... That piece only 
>>> comes
>>> with the UBNT Dish...
>>> (you can pull up the UBNT 10ghz Dish Userguide to see that ...)
>>> Jiruos adapters that we used, required that piece to be removed from the 
>>> AF11x
>>> so that it could be screwed in directly (as per my picture). I was told that
>>> they were going to redesign so that they would have a mateing bracket on 
>>> their
>>> side so that the AF11x would slide in.
>>> (You will also need to have to include cables to connect to AF11x to the 
>>> Feed
>>> horn .. I am sure you already knew that).
>>> Regards
>>> Faisal Imtiaz
>>> Snappy Internet & Telecom
>>> 7266 SW 48 Street
>>> Miami, FL 33155
>>> Tel: 305 663 5518 x 232

>>> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

>>>> From: ch...@wbmfg.com
>>>> To: af@afmug.com
>>>> Sent: Thursday, October 5, 2017 10:45:45 AM
>>>> Subject: Re: [AFMUG] Fw: AF11x adapters

>>>> No because my design presumes the adapter will be there to space the radio 
>>>> out
>>>> away from the end of the waveguide transition. Without that extra spacing 
>>>> the
>>>> radio would crash into the end of the adapter.
>>>> From: Mathew Howard
>>>> Sent: Thursday, October 5, 2017 8:42 AM
>>>> To: af
>>>> Subject: Re: [AFMUG] Fw: AF11x adapters
>>>> Wouldn't it work without the adapter anyway? If I'm remembering right, 
>>>> with the
>>>> Jirous adapters, you take the snap adapter off and just bolt the radio 
>>>> directly
>>>> to their mounting plate using the same holes... wouldn't that line up with 
>>>> your
>>>> adapter too?
>>>> On Thu, Oct 5, 2017 at 9:33 AM, < ch...@wbmfg.com > wrote:

>>>>> If that plastic slide/snap adapter is included with each radio, then we 
>>>>> should
>>>>> be good.
>>>>> I designed th

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Mathew Howard 
Yeah, in your picture it doesn't look like they'll line up. If you needed
to make it work in a pinch, a guy could probably just drill a new set of
holes, find some longer screws and use the bracket on the radio as a spacer.

On Thu, Oct 5, 2017 at 11:24 AM, Chuck McCown <ch...@wbmfg.com> wrote:

> I think there is a difference in the hole pattern between the snap adapter
> and the radio.
>
> *From:* Faisal Imtiaz
> *Sent:* Thursday, October 05, 2017 10:20 AM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Fw: AF11x adapters
>
> Quick simple fix would be to create some sort of a stand-off and use
> longer screws to bolt the radio in place.
>
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
> Miami, FL 33155
> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
> Tel: 305 663 5518 <(305)%20663-5518> x 232
>
> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
> supp...@snappytelecom.net
>
> --
>
> *From: *"Chuck McCown" <ch...@wbmfg.com>
> *To: *af@afmug.com
> *Sent: *Thursday, October 5, 2017 12:09:49 PM
> *Subject: *Re: [AFMUG] Fw: AF11x adapters
>
> I will supply them in all future shipments.
>
> *From:* Gino A. Villarini
> *Sent:* Thursday, October 05, 2017 10:08 AM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Fw: AF11x adapters
>
> Just clarified, the plastic adapter does not come with the radio, will
> need to retool base to use holes in metal adapter
>
> From: Af <af-boun...@afmug.com> on behalf of Jeremy <
> jeremysmi...@gmail.com>
> Reply-To: "af@afmug.com" <af@afmug.com>
> Date: Thursday, October 5, 2017 at 11:33 AM
> To: "af@afmug.com" <af@afmug.com>
> Subject: Re: [AFMUG] Fw: AF11x adapters
>
> They sell it in a set with the 11GHz Type-N cables.  Streakwave has some
> in stock.  AF-11CA $52
>
>
>
>
> *Gino A. Villarini*
> President
> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
>
> On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz <fai...@snappytelecom.net>
> wrote:
>
>> Hmmm... in that case.. the question would be... How do you mount the
>> radio to the Adapter plate.
>>
>> There needs to be a mateing adapter on your plate side... That piece only
>> comes with the UBNT Dish...
>>
>> (you can pull up the UBNT 10ghz Dish Userguide to see that ...)
>>
>> Jiruos adapters that we used, required that piece to be removed from the
>> AF11x so that it could be screwed in directly (as per my picture).  I was
>> told that they were going to redesign so that they would have a mateing
>> bracket on their side so that the AF11x would slide in.
>>
>> (You will also need to have to include cables to connect to AF11x to the
>> Feed horn .. I am sure you already knew that).
>>
>> Regards
>>
>> Faisal Imtiaz
>> Snappy Internet & Telecom
>> 7266 SW 48 Street
>> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
>> Miami, FL 33155
>> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
>> Tel: 305 663 5518 x 232 <(305)%20663-5518>
>>
>> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
>> supp...@snappytelecom.net
>>
>> ----------
>>
>> *From: *ch...@wbmfg.com
>> *To: *af@afmug.com
>> *Sent: *Thursday, October 5, 2017 10:45:45 AM
>> *Subject: *Re: [AFMUG] Fw: AF11x adapters
>>
>> No because my design presumes the adapter will be there to space the
>> radio out away from the end of the waveguide transition.  Without that
>> extra spacing the radio would crash into the end of the adapter.
>>
>> *From:* Mathew Howard
>> *Sent:* Thursday, October 5, 2017 8:42 AM
>> *To:* af
>> *Subject:* Re: [AFMUG] Fw: AF11x adapters
>>
>> Wouldn't it work without the adapter anyway? If I'm remembering right,
>> with the Jirous adapters, you take the snap adapter off and just bolt the
>> radio directly to their mounting plate using the same holes... wouldn't
>> that line up with your adapter too?
>>
>> On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:
>>
>>> If that plastic slide/snap adapter is included with each radio, then we
>>> should be good.
>>> I designed the spacing and everything assuming that adapter would be
>>> used with each unit.
>>>
>>> *From:* Faisal Imtiaz
>>> *Sent:* Thursday, October 5, 2017 8:28 AM
>>

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Chuck McCown 
I think there is a difference in the hole pattern between the snap adapter and 
the radio.

From: Faisal Imtiaz 
Sent: Thursday, October 05, 2017 10:20 AM
To: af@afmug.com 
Subject: Re: [AFMUG] Fw: AF11x adapters

Quick simple fix would be to create some sort of a stand-off and use longer 
screws to bolt the radio in place.

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net




  From: "Chuck McCown" <ch...@wbmfg.com>
  To: af@afmug.com
  Sent: Thursday, October 5, 2017 12:09:49 PM
  Subject: Re: [AFMUG] Fw: AF11x adapters

  I will supply them in all future shipments.

  From: Gino A. Villarini
  Sent: Thursday, October 05, 2017 10:08 AM
  To: af@afmug.com
  Subject: Re: [AFMUG] Fw: AF11x adapters

  Just clarified, the plastic adapter does not come with the radio, will need 
to retool base to use holes in metal adapter

  From: Af <af-boun...@afmug.com> on behalf of Jeremy <jeremysmi...@gmail.com>
  Reply-To: "af@afmug.com" <af@afmug.com>
  Date: Thursday, October 5, 2017 at 11:33 AM
  To: "af@afmug.com" <af@afmug.com>
  Subject: Re: [AFMUG] Fw: AF11x adapters


  They sell it in a set with the 11GHz Type-N cables.  Streakwave has some in 
stock.  AF-11CA $52



Gino A. Villarini
   
President 
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 



  On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz <fai...@snappytelecom.net> 
wrote:

Hmmm... in that case.. the question would be... How do you mount the radio 
to the Adapter plate.

There needs to be a mateing adapter on your plate side... That piece only 
comes with the UBNT Dish...

(you can pull up the UBNT 10ghz Dish Userguide to see that ...)

Jiruos adapters that we used, required that piece to be removed from the 
AF11x so that it could be screwed in directly (as per my picture).  I was told 
that they were going to redesign so that they would have a mateing bracket on 
their side so that the AF11x would slide in.

(You will also need to have to include cables to connect to AF11x to the 
Feed horn .. I am sure you already knew that).

Regards

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net




  From: ch...@wbmfg.com
  To: af@afmug.com
      Sent: Thursday, October 5, 2017 10:45:45 AM
  Subject: Re: [AFMUG] Fw: AF11x adapters

  No because my design presumes the adapter will be there to space the 
radio out away from the end of the waveguide transition.  Without that extra 
spacing the radio would crash into the end of the adapter.

  From: Mathew Howard
  Sent: Thursday, October 5, 2017 8:42 AM
  To: af
  Subject: Re: [AFMUG] Fw: AF11x adapters

  Wouldn't it work without the adapter anyway? If I'm remembering right, 
with the Jirous adapters, you take the snap adapter off and just bolt the radio 
directly to their mounting plate using the same holes... wouldn't that line up 
with your adapter too?


  On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:

If that plastic slide/snap adapter is included with each radio, then we 
should be good.
I designed the spacing and everything assuming that adapter would be 
used with each unit.

From: Faisal Imtiaz
Sent: Thursday, October 5, 2017 8:28 AM
To: af@afmug.com
Subject: Re: [AFMUG] Fw: AF11x adapters

Picture of the Jirous Adapter attached

rest of the answers are inline below.

If you have any questions, feel free to call me.

Regards.

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net




  From: "Chuck McCown" <ch...@wbmfg.com>
      To: af@afmug.com
  Sent: Thursday, October 5, 2017 8:58:26 AM
  Subject: [AFMUG] Fw: AF11x adapters

  Made Gino some adapters so he can use AF11x radios on Remec mount 
antennas.  
  I made the hole pattern to match a plastic slide and snap adapter 
that came with the radio I have.  
That should be fine
  But not sure if that part is included with all AF11X radios.  Gino is 
asking about how the radio is supposed to mount to my adapter.  
  If the slide/snap is not automatically included in all shipments, I 
need to alter the bolt pattern to allow mounting of the radio wh

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Faisal Imtiaz 
>> My feed uses normal SMA, not RP-SMA. 

It does not matter what your connectors are.. the cables would need to be 
sourced by the user.. 
they don't come with the Radio.. 

Jirous supplies them with their adapter 
Ubnt provides them with their Dish Antenna. 

Regards. 

Faisal Imtiaz 
Snappy Internet & Telecom 
7266 SW 48 Street 
Miami, FL 33155 
Tel: 305 663 5518 x 232 

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net 

> From: "Chuck McCown" <ch...@wbmfg.com>
> To: af@afmug.com
> Sent: Thursday, October 5, 2017 11:31:35 AM
> Subject: Re: [AFMUG] Fw: AF11x adapters

> I presumed that snap adapter came with the radio. You bolt that to my adapter
> and slide/snap the radio onto it.
> If that is not true (that they come with the radios) I will either have to
> obtain a supply of the adapter or modify my mount.
> My feed uses normal SMA, not RP-SMA.
> From: Faisal Imtiaz
> Sent: Thursday, October 05, 2017 8:51 AM
> To: af@afmug.com
> Subject: Re: [AFMUG] Fw: AF11x adapters
> Hmmm... in that case.. the question would be... How do you mount the radio to
> the Adapter plate.
> There needs to be a mateing adapter on your plate side... That piece only 
> comes
> with the UBNT Dish...
> (you can pull up the UBNT 10ghz Dish Userguide to see that ...)
> Jiruos adapters that we used, required that piece to be removed from the AF11x
> so that it could be screwed in directly (as per my picture). I was told that
> they were going to redesign so that they would have a mateing bracket on their
> side so that the AF11x would slide in.
> (You will also need to have to include cables to connect to AF11x to the Feed
> horn .. I am sure you already knew that).
> Regards
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> Miami, FL 33155
> Tel: 305 663 5518 x 232

> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

>> From: ch...@wbmfg.com
>> To: af@afmug.com
>> Sent: Thursday, October 5, 2017 10:45:45 AM
>> Subject: Re: [AFMUG] Fw: AF11x adapters

>> No because my design presumes the adapter will be there to space the radio 
>> out
>> away from the end of the waveguide transition. Without that extra spacing the
>> radio would crash into the end of the adapter.
>> From: Mathew Howard
>> Sent: Thursday, October 5, 2017 8:42 AM
>> To: af
>> Subject: Re: [AFMUG] Fw: AF11x adapters
>> Wouldn't it work without the adapter anyway? If I'm remembering right, with 
>> the
>> Jirous adapters, you take the snap adapter off and just bolt the radio 
>> directly
>> to their mounting plate using the same holes... wouldn't that line up with 
>> your
>> adapter too?
>> On Thu, Oct 5, 2017 at 9:33 AM, < ch...@wbmfg.com > wrote:

>>> If that plastic slide/snap adapter is included with each radio, then we 
>>> should
>>> be good.
>>> I designed the spacing and everything assuming that adapter would be used 
>>> with
>>> each unit.
>>> From: Faisal Imtiaz
>>> Sent: Thursday, October 5, 2017 8:28 AM
>>> To: af@afmug.com
>>> Subject: Re: [AFMUG] Fw: AF11x adapters
>>> Picture of the Jirous Adapter attached
>>> rest of the answers are inline below.
>>> If you have any questions, feel free to call me.
>>> Regards.
>>> Faisal Imtiaz
>>> Snappy Internet & Telecom
>>> 7266 SW 48 Street
>>> Miami, FL 33155
>>> Tel: 305 663 5518 x 232

>>> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

>>>> From: "Chuck McCown" < ch...@wbmfg.com >
>>>> To: af@afmug.com
>>>> Sent: Thursday, October 5, 2017 8:58:26 AM
>>>> Subject: [AFMUG] Fw: AF11x adapters

>>>> Made Gino some adapters so he can use AF11x radios on Remec mount antennas.
>>>> I made the hole pattern to match a plastic slide and snap adapter that 
>>>> came with
>>>> the radio I have.

>>> That should be fine

>>>> But not sure if that part is included with all AF11X radios. Gino is asking
>>>> about how the radio is supposed to mount to my adapter.
>>>> If the slide/snap is not automatically included in all shipments, I need to
>>>> alter the bolt pattern to allow mounting of the radio when that part is not
>>>> present. He needs some more of these adapters and I want to make sure to 
>>>> send
>>>> him stuff that does not require any work on his part.
>>>> Do you AF11X users know if that slid/snap adapter plate is included with 
>>>> all
>>>> radios?

>>> Yes that slide/snap adapter is included with each of the AF11x (That is how 
>>> they
>>> slide/attach to the UBNT dishes).

>>>> If so, can we buy more for Gino to use right now in the event he has lost 
>>>> his?
>>>> If not how should I alter the mount so the radio can still fit onto the
>>>> adapter?

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Faisal Imtiaz 
Quick simple fix would be to create some sort of a stand-off and use longer 
screws to bolt the radio in place. 

Faisal Imtiaz 
Snappy Internet & Telecom 
7266 SW 48 Street 
Miami, FL 33155 
Tel: 305 663 5518 x 232 

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net 

> From: "Chuck McCown" <ch...@wbmfg.com>
> To: af@afmug.com
> Sent: Thursday, October 5, 2017 12:09:49 PM
> Subject: Re: [AFMUG] Fw: AF11x adapters

> I will supply them in all future shipments.
> From: Gino A. Villarini
> Sent: Thursday, October 05, 2017 10:08 AM
> To: af@afmug.com
> Subject: Re: [AFMUG] Fw: AF11x adapters
> Just clarified, the plastic adapter does not come with the radio, will need to
> retool base to use holes in metal adapter
> From: Af < af-boun...@afmug.com > on behalf of Jeremy < 
> jeremysmi...@gmail.com >
> Reply-To: " af@afmug.com " < af@afmug.com >
> Date: Thursday, October 5, 2017 at 11:33 AM
> To: " af@afmug.com " < af@afmug.com >
> Subject: Re: [AFMUG] Fw: AF11x adapters
> They sell it in a set with the 11GHz Type-N cables. Streakwave has some in
> stock. AF-11CA $52

> Gino A. Villarini
> President
> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

> On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz < fai...@snappytelecom.net >
> wrote:

>> Hmmm... in that case.. the question would be... How do you mount the radio to
>> the Adapter plate.
>> There needs to be a mateing adapter on your plate side... That piece only 
>> comes
>> with the UBNT Dish...
>> (you can pull up the UBNT 10ghz Dish Userguide to see that ...)
>> Jiruos adapters that we used, required that piece to be removed from the 
>> AF11x
>> so that it could be screwed in directly (as per my picture). I was told that
>> they were going to redesign so that they would have a mateing bracket on 
>> their
>> side so that the AF11x would slide in.
>> (You will also need to have to include cables to connect to AF11x to the Feed
>> horn .. I am sure you already knew that).
>> Regards
>> Faisal Imtiaz
>> Snappy Internet & Telecom
>> 7266 SW 48 Street
>> Miami, FL 33155
>> Tel: 305 663 5518 x 232

>> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

>>> From: ch...@wbmfg.com
>>> To: af@afmug.com
>>> Sent: Thursday, October 5, 2017 10:45:45 AM
>>> Subject: Re: [AFMUG] Fw: AF11x adapters

>>> No because my design presumes the adapter will be there to space the radio 
>>> out
>>> away from the end of the waveguide transition. Without that extra spacing 
>>> the
>>> radio would crash into the end of the adapter.
>>> From: Mathew Howard
>>> Sent: Thursday, October 5, 2017 8:42 AM
>>> To: af
>>> Subject: Re: [AFMUG] Fw: AF11x adapters
>>> Wouldn't it work without the adapter anyway? If I'm remembering right, with 
>>> the
>>> Jirous adapters, you take the snap adapter off and just bolt the radio 
>>> directly
>>> to their mounting plate using the same holes... wouldn't that line up with 
>>> your
>>> adapter too?
>>> On Thu, Oct 5, 2017 at 9:33 AM, < ch...@wbmfg.com > wrote:

>>>> If that plastic slide/snap adapter is included with each radio, then we 
>>>> should
>>>> be good.
>>>> I designed the spacing and everything assuming that adapter would be used 
>>>> with
>>>> each unit.
>>>> From: Faisal Imtiaz
>>>> Sent: Thursday, October 5, 2017 8:28 AM
>>>> To: af@afmug.com
>>>> Subject: Re: [AFMUG] Fw: AF11x adapters
>>>> Picture of the Jirous Adapter attached
>>>> rest of the answers are inline below.
>>>> If you have any questions, feel free to call me.
>>>> Regards.
>>>> Faisal Imtiaz
>>>> Snappy Internet & Telecom
>>>> 7266 SW 48 Street
>>>> Miami, FL 33155
>>>> Tel: 305 663 5518 x 232

>>>> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

>>>>> From: "Chuck McCown" < ch...@wbmfg.com >
>>>>> To: af@afmug.com
>>>>> Sent: Thursday, October 5, 2017 8:58:26 AM
>>>>> Subject: [AFMUG] Fw: AF11x adapters

>>>>> Made Gino some adapters so he can use AF11x radios on Remec mount 
>>>>> antennas.
>>>>> I made the hole pattern to match a plastic slide and snap adapter that 
>>>>> came with
>>>>> the radio I have.

>>>> That should be fine

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Mathew Howard 
The slide adapter in your picture is what comes bolted to the radio,
correct? So you would need an adapter that piece will slide into (the same
adapter as any Ubiquiti antenna has on it)... if that's the case, I don't
believe that comes with the radio (at least it didn't come with the pair we
have).

On Thu, Oct 5, 2017 at 10:31 AM, Chuck McCown <ch...@wbmfg.com> wrote:

> I presumed that snap adapter came with the radio.  You bolt that to my
> adapter and slide/snap the radio onto it.
>
> If that is not true (that they come with the radios) I will either have to
> obtain a supply of the adapter or modify my mount.
>
> My feed uses normal SMA, not RP-SMA.
>
> *From:* Faisal Imtiaz
> *Sent:* Thursday, October 05, 2017 8:51 AM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Fw: AF11x adapters
>
> Hmmm... in that case.. the question would be... How do you mount the radio
> to the Adapter plate.
>
> There needs to be a mateing adapter on your plate side... That piece only
> comes with the UBNT Dish...
>
> (you can pull up the UBNT 10ghz Dish Userguide to see that ...)
>
> Jiruos adapters that we used, required that piece to be removed from the
> AF11x so that it could be screwed in directly (as per my picture).  I was
> told that they were going to redesign so that they would have a mateing
> bracket on their side so that the AF11x would slide in.
>
> (You will also need to have to include cables to connect to AF11x to the
> Feed horn .. I am sure you already knew that).
>
> Regards
>
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
> Miami, FL 33155
> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
> Tel: 305 663 5518 <(305)%20663-5518> x 232
>
> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
> supp...@snappytelecom.net
>
> --
>
> *From: *ch...@wbmfg.com
> *To: *af@afmug.com
> *Sent: *Thursday, October 5, 2017 10:45:45 AM
> *Subject: *Re: [AFMUG] Fw: AF11x adapters
>
> No because my design presumes the adapter will be there to space the radio
> out away from the end of the waveguide transition.  Without that extra
> spacing the radio would crash into the end of the adapter.
>
> *From:* Mathew Howard
> *Sent:* Thursday, October 5, 2017 8:42 AM
> *To:* af
> *Subject:* Re: [AFMUG] Fw: AF11x adapters
>
> Wouldn't it work without the adapter anyway? If I'm remembering right,
> with the Jirous adapters, you take the snap adapter off and just bolt the
> radio directly to their mounting plate using the same holes... wouldn't
> that line up with your adapter too?
>
> On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:
>
>> If that plastic slide/snap adapter is included with each radio, then we
>> should be good.
>> I designed the spacing and everything assuming that adapter would be used
>> with each unit.
>>
>> *From:* Faisal Imtiaz
>> *Sent:* Thursday, October 5, 2017 8:28 AM
>> *To:* af@afmug.com
>> *Subject:* Re: [AFMUG] Fw: AF11x adapters
>>
>> Picture of the Jirous Adapter attached
>>
>> rest of the answers are inline below.
>>
>> If you have any questions, feel free to call me.
>>
>> Regards.
>>
>> Faisal Imtiaz
>> Snappy Internet & Telecom
>> 7266 SW 48 Street
>> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
>> Miami, FL 33155
>> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
>> Tel: 305 663 5518 <(305)%20663-5518> x 232
>>
>> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
>> supp...@snappytelecom.net
>>
>> --
>>
>> *From: *"Chuck McCown" <ch...@wbmfg.com>
>> *To: *af@afmug.com
>> *Sent: *Thursday, October 5, 2017 8:58:26 AM
>> *Subject: *[AFMUG] Fw: AF11x adapters
>>
>>
>> Made Gino some adapters so he can use AF11x radios on Remec mount
>> antennas.
>> I made the hole pattern to match a plastic slide and snap adapter that
>> came with the radio I have.
>>
>> That should be fine
>>
>> But not sure if that part is included with all AF11X radios.  Gino is
>> asking about how the radio is supposed to mount to my adapter.
>> If the slide/snap is not automatically included in all shipments, I need
>> to alter the bolt pattern to allow mounting of the radio when that part is
>> not present.  He needs some more of these adapters and I want to make sure
>> to send him stuff that does not require any work on his part.
>> Do you AF11X users know if that slid/snap adapter plate is included with
>> all radios?
>>
>> Yes that slide/snap adapter is included with each of the AF11x (That is
>> how they slide/attach to the UBNT dishes).
>>
>> If so, can we buy more for Gino to use right now in the event he has lost
>> his?  If not how should I alter the mount so the radio can still fit onto
>> the adapter?
>>
>>
>
>

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Chuck McCown 
I will supply them in all future shipments.

From: Gino A. Villarini 
Sent: Thursday, October 05, 2017 10:08 AM
To: af@afmug.com 
Subject: Re: [AFMUG] Fw: AF11x adapters

Just clarified, the plastic adapter does not come with the radio, will need to 
retool base to use holes in metal adapter 

From: Af <af-boun...@afmug.com> on behalf of Jeremy <jeremysmi...@gmail.com>
Reply-To: "af@afmug.com" <af@afmug.com>
Date: Thursday, October 5, 2017 at 11:33 AM
To: "af@afmug.com" <af@afmug.com>
Subject: Re: [AFMUG] Fw: AF11x adapters


They sell it in a set with the 11GHz Type-N cables.  Streakwave has some in 
stock.  AF-11CA $52



  Gino A. Villarini
 
  President 
  Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 




On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz <fai...@snappytelecom.net> wrote:

  Hmmm... in that case.. the question would be... How do you mount the radio to 
the Adapter plate.

  There needs to be a mateing adapter on your plate side... That piece only 
comes with the UBNT Dish...

  (you can pull up the UBNT 10ghz Dish Userguide to see that ...)

  Jiruos adapters that we used, required that piece to be removed from the 
AF11x so that it could be screwed in directly (as per my picture).  I was told 
that they were going to redesign so that they would have a mateing bracket on 
their side so that the AF11x would slide in.

  (You will also need to have to include cables to connect to AF11x to the Feed 
horn .. I am sure you already knew that).

  Regards

  Faisal Imtiaz
  Snappy Internet & Telecom
  7266 SW 48 Street
  Miami, FL 33155
  Tel: 305 663 5518 x 232

  Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net


--

From: ch...@wbmfg.com
To: af@afmug.com
Sent: Thursday, October 5, 2017 10:45:45 AM
Subject: Re: [AFMUG] Fw: AF11x adapters

No because my design presumes the adapter will be there to space the radio 
out away from the end of the waveguide transition.  Without that extra spacing 
the radio would crash into the end of the adapter. 

From: Mathew Howard
Sent: Thursday, October 5, 2017 8:42 AM
To: af
Subject: Re: [AFMUG] Fw: AF11x adapters

Wouldn't it work without the adapter anyway? If I'm remembering right, with 
the Jirous adapters, you take the snap adapter off and just bolt the radio 
directly to their mounting plate using the same holes... wouldn't that line up 
with your adapter too?


On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:

  If that plastic slide/snap adapter is included with each radio, then we 
should be good.
  I designed the spacing and everything assuming that adapter would be used 
with each unit. 

  From: Faisal Imtiaz
  Sent: Thursday, October 5, 2017 8:28 AM
  To: af@afmug.com
  Subject: Re: [AFMUG] Fw: AF11x adapters

  Picture of the Jirous Adapter attached

  rest of the answers are inline below.

  If you have any questions, feel free to call me.

  Regards.

  Faisal Imtiaz
  Snappy Internet & Telecom
  7266 SW 48 Street
  Miami, FL 33155
  Tel: 305 663 5518 x 232

  Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net


--

From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
    Sent: Thursday, October 5, 2017 8:58:26 AM
Subject: [AFMUG] Fw: AF11x adapters

Made Gino some adapters so he can use AF11x radios on Remec mount 
antennas.  
I made the hole pattern to match a plastic slide and snap adapter that 
came with the radio I have.  
  That should be fine
But not sure if that part is included with all AF11X radios.  Gino is 
asking about how the radio is supposed to mount to my adapter.  
If the slide/snap is not automatically included in all shipments, I 
need to alter the bolt pattern to allow mounting of the radio when that part is 
not present.  He needs some more of these adapters and I want to make sure to 
send him stuff that does not require any work on his part.  
Do you AF11X users know if that slid/snap adapter plate is included 
with all radios? 
  Yes that slide/snap adapter is included with each of the AF11x (That is 
how they slide/attach to the UBNT dishes).
If so, can we buy more for Gino to use right now in the event he has 
lost his?  If not how should I alter the mount so the radio can still fit onto 
the adapter?

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Gino A. Villarini 
Just clarified, the plastic adapter does not come with the radio, will need to 
retool base to use holes in metal adapter

From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of 
Jeremy <jeremysmi...@gmail.com<mailto:jeremysmi...@gmail.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
<af@afmug.com<mailto:af@afmug.com>>
Date: Thursday, October 5, 2017 at 11:33 AM
To: "af@afmug.com<mailto:af@afmug.com>" <af@afmug.com<mailto:af@afmug.com>>
Subject: Re: [AFMUG] Fw: AF11x adapters

They sell it in a set with the 11GHz Type-N cables.  Streakwave has some in 
stock.  AF-11CA $52




Gino A. Villarini


President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

[cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png]

On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz 
<fai...@snappytelecom.net<mailto:fai...@snappytelecom.net>> wrote:
Hmmm... in that case.. the question would be... How do you mount the radio to 
the Adapter plate.

There needs to be a mateing adapter on your plate side... That piece only comes 
with the UBNT Dish...

(you can pull up the UBNT 10ghz Dish Userguide to see that ...)

Jiruos adapters that we used, required that piece to be removed from the AF11x 
so that it could be screwed in directly (as per my picture).  I was told that 
they were going to redesign so that they would have a mateing bracket on their 
side so that the AF11x would slide in.

(You will also need to have to include cables to connect to AF11x to the Feed 
horn .. I am sure you already knew that).

Regards

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 
Street<https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
Miami, FL 
33155<https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
Tel: 305 663 5518 x 232<tel:(305)%20663-5518>

Help-desk: (305)663-5518<tel:(305)%20663-5518> Option 2 or Email: 
supp...@snappytelecom.net<mailto:supp...@snappytelecom.net>


From: ch...@wbmfg.com<mailto:ch...@wbmfg.com>
To: af@afmug.com<mailto:af@afmug.com>
Sent: Thursday, October 5, 2017 10:45:45 AM
Subject: Re: [AFMUG] Fw: AF11x adapters
No because my design presumes the adapter will be there to space the radio out 
away from the end of the waveguide transition.  Without that extra spacing the 
radio would crash into the end of the adapter.

From: Mathew Howard
Sent: Thursday, October 5, 2017 8:42 AM
To: af
Subject: Re: [AFMUG] Fw: AF11x adapters

Wouldn't it work without the adapter anyway? If I'm remembering right, with the 
Jirous adapters, you take the snap adapter off and just bolt the radio directly 
to their mounting plate using the same holes... wouldn't that line up with your 
adapter too?

On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:
If that plastic slide/snap adapter is included with each radio, then we should 
be good.
I designed the spacing and everything assuming that adapter would be used with 
each unit.

From: Faisal Imtiaz
Sent: Thursday, October 5, 2017 8:28 AM
To: af@afmug.com
Subject: Re: [AFMUG] Fw: AF11x adapters

Picture of the Jirous Adapter attached

rest of the answers are inline below.

If you have any questions, feel free to call me.

Regards.

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 
Street<https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
Miami, FL 
33155<https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
Tel: 305 663 5518<tel:(305)%20663-5518> x 232

Help-desk: (305)663-5518<tel:(305)%20663-5518> Option 2 or Email: 
supp...@snappytelecom.net<mailto:supp...@snappytelecom.net>


From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: Thursday, October 5, 2017 8:58:26 AM
Subject: [AFMUG] Fw: AF11x adapters

Made Gino some adapters so he can use AF11x radios on Remec mount antennas.
I made the hole pattern to match a plastic slide and snap adapter that came 
with the radio I have.
That should be fine
But not sure if that part is included with all AF11X radios.  Gino is asking 
about how the radio is supposed to mount to my adapter.
If the slide/snap is not automatically included in all shipments, I need to 
alter the bolt pattern to allow mounting of the radio when that part is not 
present.  He needs some more of these adapters and I want to make sure to send 
him stuff that does not require any work on his part.
Do you AF11X users know if that slid/snap adapter plate is included with all 
radios?
Yes that slide/snap adapter is included with each of the AF11x (That is how 
they slide/attach to the UBNT dishes).
If so, can we buy more for Gino to use right now in the event he has lost his?  
If not how should I alter the mount so the radio can still fit onto the adapter?

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Jeremy 
They sell it in a set with the 11GHz Type-N cables.  Streakwave has some in
stock.  AF-11CA $52

On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz <fai...@snappytelecom.net>
wrote:

> Hmmm... in that case.. the question would be... How do you mount the radio
> to the Adapter plate.
>
> There needs to be a mateing adapter on your plate side... That piece only
> comes with the UBNT Dish...
>
> (you can pull up the UBNT 10ghz Dish Userguide to see that ...)
>
> Jiruos adapters that we used, required that piece to be removed from the
> AF11x so that it could be screwed in directly (as per my picture).  I was
> told that they were going to redesign so that they would have a mateing
> bracket on their side so that the AF11x would slide in.
>
> (You will also need to have to include cables to connect to AF11x to the
> Feed horn .. I am sure you already knew that).
>
> Regards
>
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
> Miami, FL 33155
> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
> Tel: 305 663 5518 x 232 <(305)%20663-5518>
>
> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
> supp...@snappytelecom.net
>
> ------
>
> *From: *ch...@wbmfg.com
> *To: *af@afmug.com
> *Sent: *Thursday, October 5, 2017 10:45:45 AM
> *Subject: *Re: [AFMUG] Fw: AF11x adapters
>
> No because my design presumes the adapter will be there to space the radio
> out away from the end of the waveguide transition.  Without that extra
> spacing the radio would crash into the end of the adapter.
>
> *From:* Mathew Howard
> *Sent:* Thursday, October 5, 2017 8:42 AM
> *To:* af
> *Subject:* Re: [AFMUG] Fw: AF11x adapters
>
> Wouldn't it work without the adapter anyway? If I'm remembering right,
> with the Jirous adapters, you take the snap adapter off and just bolt the
> radio directly to their mounting plate using the same holes... wouldn't
> that line up with your adapter too?
>
> On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:
>
>> If that plastic slide/snap adapter is included with each radio, then we
>> should be good.
>> I designed the spacing and everything assuming that adapter would be used
>> with each unit.
>>
>> *From:* Faisal Imtiaz
>> *Sent:* Thursday, October 5, 2017 8:28 AM
>> *To:* af@afmug.com
>> *Subject:* Re: [AFMUG] Fw: AF11x adapters
>>
>> Picture of the Jirous Adapter attached
>>
>> rest of the answers are inline below.
>>
>> If you have any questions, feel free to call me.
>>
>> Regards.
>>
>> Faisal Imtiaz
>> Snappy Internet & Telecom
>> 7266 SW 48 Street
>> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
>> Miami, FL 33155
>> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
>> Tel: 305 663 5518 <(305)%20663-5518> x 232
>>
>> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
>> supp...@snappytelecom.net
>>
>> --
>>
>> *From: *"Chuck McCown" <ch...@wbmfg.com>
>> *To: *af@afmug.com
>> *Sent: *Thursday, October 5, 2017 8:58:26 AM
>> *Subject: *[AFMUG] Fw: AF11x adapters
>>
>>
>> Made Gino some adapters so he can use AF11x radios on Remec mount
>> antennas.
>> I made the hole pattern to match a plastic slide and snap adapter that
>> came with the radio I have.
>>
>> That should be fine
>>
>> But not sure if that part is included with all AF11X radios.  Gino is
>> asking about how the radio is supposed to mount to my adapter.
>> If the slide/snap is not automatically included in all shipments, I need
>> to alter the bolt pattern to allow mounting of the radio when that part is
>> not present.  He needs some more of these adapters and I want to make sure
>> to send him stuff that does not require any work on his part.
>> Do you AF11X users know if that slid/snap adapter plate is included with
>> all radios?
>>
>> Yes that slide/snap adapter is included with each of the AF11x (That is
>> how they slide/attach to the UBNT dishes).
>>
>> If so, can we buy more for Gino to use right now in the event he has lost
>> his?  If not how should I alter the mount so the radio can still fit onto
>> the adapter?
>>
>>
>
>

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Chuck McCown 
I presumed that snap adapter came with the radio.  You bolt that to my adapter 
and slide/snap the radio onto it.  

If that is not true (that they come with the radios) I will either have to 
obtain a supply of the adapter or modify my mount.  

My feed uses normal SMA, not RP-SMA.

From: Faisal Imtiaz 
Sent: Thursday, October 05, 2017 8:51 AM
To: af@afmug.com 
Subject: Re: [AFMUG] Fw: AF11x adapters

Hmmm... in that case.. the question would be... How do you mount the radio to 
the Adapter plate.

There needs to be a mateing adapter on your plate side... That piece only comes 
with the UBNT Dish...

(you can pull up the UBNT 10ghz Dish Userguide to see that ...)

Jiruos adapters that we used, required that piece to be removed from the AF11x 
so that it could be screwed in directly (as per my picture).  I was told that 
they were going to redesign so that they would have a mateing bracket on their 
side so that the AF11x would slide in.

(You will also need to have to include cables to connect to AF11x to the Feed 
horn .. I am sure you already knew that).

Regards

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net




  From: ch...@wbmfg.com
  To: af@afmug.com
  Sent: Thursday, October 5, 2017 10:45:45 AM
  Subject: Re: [AFMUG] Fw: AF11x adapters

  No because my design presumes the adapter will be there to space the radio 
out away from the end of the waveguide transition.  Without that extra spacing 
the radio would crash into the end of the adapter. 

  From: Mathew Howard
  Sent: Thursday, October 5, 2017 8:42 AM
  To: af
  Subject: Re: [AFMUG] Fw: AF11x adapters

  Wouldn't it work without the adapter anyway? If I'm remembering right, with 
the Jirous adapters, you take the snap adapter off and just bolt the radio 
directly to their mounting plate using the same holes... wouldn't that line up 
with your adapter too?


  On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:

If that plastic slide/snap adapter is included with each radio, then we 
should be good.
I designed the spacing and everything assuming that adapter would be used 
with each unit. 

From: Faisal Imtiaz
Sent: Thursday, October 5, 2017 8:28 AM
To: af@afmug.com
Subject: Re: [AFMUG] Fw: AF11x adapters

Picture of the Jirous Adapter attached

rest of the answers are inline below.

If you have any questions, feel free to call me.

Regards.

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net




  From: "Chuck McCown" <ch...@wbmfg.com>
  To: af@afmug.com
  Sent: Thursday, October 5, 2017 8:58:26 AM
      Subject: [AFMUG] Fw: AF11x adapters

  Made Gino some adapters so he can use AF11x radios on Remec mount 
antennas.  
  I made the hole pattern to match a plastic slide and snap adapter that 
came with the radio I have.  
That should be fine
  But not sure if that part is included with all AF11X radios.  Gino is 
asking about how the radio is supposed to mount to my adapter.  
  If the slide/snap is not automatically included in all shipments, I need 
to alter the bolt pattern to allow mounting of the radio when that part is not 
present.  He needs some more of these adapters and I want to make sure to send 
him stuff that does not require any work on his part.  
  Do you AF11X users know if that slid/snap adapter plate is included with 
all radios? 
Yes that slide/snap adapter is included with each of the AF11x (That is how 
they slide/attach to the UBNT dishes).
  If so, can we buy more for Gino to use right now in the event he has lost 
his?  If not how should I alter the mount so the radio can still fit onto the 
adapter?

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Faisal Imtiaz 
Hmmm... in that case.. the question would be... How do you mount the radio to 
the Adapter plate. 

There needs to be a mateing adapter on your plate side... That piece only comes 
with the UBNT Dish... 

(you can pull up the UBNT 10ghz Dish Userguide to see that ...) 

Jiruos adapters that we used, required that piece to be removed from the AF11x 
so that it could be screwed in directly (as per my picture). I was told that 
they were going to redesign so that they would have a mateing bracket on their 
side so that the AF11x would slide in. 

(You will also need to have to include cables to connect to AF11x to the Feed 
horn .. I am sure you already knew that). 

Regards 

Faisal Imtiaz 
Snappy Internet & Telecom 
7266 SW 48 Street 
Miami, FL 33155 
Tel: 305 663 5518 x 232 

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net 

> From: ch...@wbmfg.com
> To: af@afmug.com
> Sent: Thursday, October 5, 2017 10:45:45 AM
> Subject: Re: [AFMUG] Fw: AF11x adapters

> No because my design presumes the adapter will be there to space the radio out
> away from the end of the waveguide transition. Without that extra spacing the
> radio would crash into the end of the adapter.
> From: Mathew Howard
> Sent: Thursday, October 5, 2017 8:42 AM
> To: af
> Subject: Re: [AFMUG] Fw: AF11x adapters
> Wouldn't it work without the adapter anyway? If I'm remembering right, with 
> the
> Jirous adapters, you take the snap adapter off and just bolt the radio 
> directly
> to their mounting plate using the same holes... wouldn't that line up with 
> your
> adapter too?
> On Thu, Oct 5, 2017 at 9:33 AM, < ch...@wbmfg.com > wrote:

>> If that plastic slide/snap adapter is included with each radio, then we 
>> should
>> be good.
>> I designed the spacing and everything assuming that adapter would be used 
>> with
>> each unit.
>> From: Faisal Imtiaz
>> Sent: Thursday, October 5, 2017 8:28 AM
>> To: af@afmug.com
>> Subject: Re: [AFMUG] Fw: AF11x adapters
>> Picture of the Jirous Adapter attached
>> rest of the answers are inline below.
>> If you have any questions, feel free to call me.
>> Regards.
>> Faisal Imtiaz
>> Snappy Internet & Telecom
>> 7266 SW 48 Street
>> Miami, FL 33155
>> Tel: 305 663 5518 x 232

>> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

>>> From: "Chuck McCown" < ch...@wbmfg.com >
>>> To: af@afmug.com
>>> Sent: Thursday, October 5, 2017 8:58:26 AM
>>> Subject: [AFMUG] Fw: AF11x adapters

>>> Made Gino some adapters so he can use AF11x radios on Remec mount antennas.
>>> I made the hole pattern to match a plastic slide and snap adapter that came 
>>> with
>>> the radio I have.

>> That should be fine

>>> But not sure if that part is included with all AF11X radios. Gino is asking
>>> about how the radio is supposed to mount to my adapter.
>>> If the slide/snap is not automatically included in all shipments, I need to
>>> alter the bolt pattern to allow mounting of the radio when that part is not
>>> present. He needs some more of these adapters and I want to make sure to 
>>> send
>>> him stuff that does not require any work on his part.
>>> Do you AF11X users know if that slid/snap adapter plate is included with all
>>> radios?

>> Yes that slide/snap adapter is included with each of the AF11x (That is how 
>> they
>> slide/attach to the UBNT dishes).

>>> If so, can we buy more for Gino to use right now in the event he has lost 
>>> his?
>>> If not how should I alter the mount so the radio can still fit onto the
>>> adapter?

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Bill Prince 

That implies some sort of kinetics...


bp


On 10/5/2017 7:45 AM, ch...@wbmfg.com wrote:
Without that extra spacing the radio would crash into the end of the 
adapter.

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread chuck 
No because my design presumes the adapter will be there to space the radio out 
away from the end of the waveguide transition.  Without that extra spacing the 
radio would crash into the end of the adapter.  

From: Mathew Howard 
Sent: Thursday, October 5, 2017 8:42 AM
To: af 
Subject: Re: [AFMUG] Fw: AF11x adapters

Wouldn't it work without the adapter anyway? If I'm remembering right, with the 
Jirous adapters, you take the snap adapter off and just bolt the radio directly 
to their mounting plate using the same holes... wouldn't that line up with your 
adapter too?


On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:

  If that plastic slide/snap adapter is included with each radio, then we 
should be good.
  I designed the spacing and everything assuming that adapter would be used 
with each unit.  

  From: Faisal Imtiaz 
  Sent: Thursday, October 5, 2017 8:28 AM
  To: af@afmug.com 
  Subject: Re: [AFMUG] Fw: AF11x adapters

  Picture of the Jirous Adapter attached

  rest of the answers are inline below.

  If you have any questions, feel free to call me.

  Regards.

  Faisal Imtiaz
  Snappy Internet & Telecom
  7266 SW 48 Street
  Miami, FL 33155
  Tel: 305 663 5518 x 232

  Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net


--

From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: Thursday, October 5, 2017 8:58:26 AM
Subject: [AFMUG] Fw: AF11x adapters

Made Gino some adapters so he can use AF11x radios on Remec mount antennas. 
 
I made the hole pattern to match a plastic slide and snap adapter that came 
with the radio I have.  
  That should be fine
But not sure if that part is included with all AF11X radios.  Gino is 
asking about how the radio is supposed to mount to my adapter.  
If the slide/snap is not automatically included in all shipments, I need to 
alter the bolt pattern to allow mounting of the radio when that part is not 
present.  He needs some more of these adapters and I want to make sure to send 
him stuff that does not require any work on his part.  
Do you AF11X users know if that slid/snap adapter plate is included with 
all radios? 
  Yes that slide/snap adapter is included with each of the AF11x (That is how 
they slide/attach to the UBNT dishes).
If so, can we buy more for Gino to use right now in the event he has lost 
his?  If not how should I alter the mount so the radio can still fit onto the 
adapter?

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread chuck 
I can make one.  

From: Jon Langeler 
Sent: Thursday, October 5, 2017 8:36 AM
To: af@afmug.com 
Subject: Re: [AFMUG] Fw: AF11x adapters

Do you have something that fits an old Dragonwave Airpair ?


Jon Langeler
Michwave Technologies, Inc.


On Oct 5, 2017, at 8:58 AM, Chuck McCown <ch...@wbmfg.com> wrote:


  Made Gino some adapters so he can use AF11x radios on Remec mount antennas.  
  I made the hole pattern to match a plastic slide and snap adapter that came 
with the radio I have.  
  But not sure if that part is included with all AF11X radios.  Gino is asking 
about how the radio is supposed to mount to my adapter.  
  If the slide/snap is not automatically included in all shipments, I need to 
alter the bolt pattern to allow mounting of the radio when that part is not 
present.  He needs some more of these adapters and I want to make sure to send 
him stuff that does not require any work on his part.  
  Do you AF11X users know if that slid/snap adapter plate is included with all 
radios?  If so, can we buy more for Gino to use right now in the event he has 
lost his?  If not how should I alter the mount so the radio can still fit onto 
the adapter?

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Mathew Howard 
Wouldn't it work without the adapter anyway? If I'm remembering right, with
the Jirous adapters, you take the snap adapter off and just bolt the radio
directly to their mounting plate using the same holes... wouldn't that line
up with your adapter too?

On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:

> If that plastic slide/snap adapter is included with each radio, then we
> should be good.
> I designed the spacing and everything assuming that adapter would be used
> with each unit.
>
> *From:* Faisal Imtiaz
> *Sent:* Thursday, October 5, 2017 8:28 AM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Fw: AF11x adapters
>
> Picture of the Jirous Adapter attached
>
> rest of the answers are inline below.
>
> If you have any questions, feel free to call me.
>
> Regards.
>
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
> Miami, FL 33155
> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
> Tel: 305 663 5518 <(305)%20663-5518> x 232
>
> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
> supp...@snappytelecom.net
>
> --
>
> *From: *"Chuck McCown" <ch...@wbmfg.com>
> *To: *af@afmug.com
> *Sent: *Thursday, October 5, 2017 8:58:26 AM
> *Subject: *[AFMUG] Fw: AF11x adapters
>
>
> Made Gino some adapters so he can use AF11x radios on Remec mount
> antennas.
> I made the hole pattern to match a plastic slide and snap adapter that
> came with the radio I have.
>
> That should be fine
>
> But not sure if that part is included with all AF11X radios.  Gino is
> asking about how the radio is supposed to mount to my adapter.
> If the slide/snap is not automatically included in all shipments, I need
> to alter the bolt pattern to allow mounting of the radio when that part is
> not present.  He needs some more of these adapters and I want to make sure
> to send him stuff that does not require any work on his part.
> Do you AF11X users know if that slid/snap adapter plate is included with
> all radios?
>
> Yes that slide/snap adapter is included with each of the AF11x (That is
> how they slide/attach to the UBNT dishes).
>
> If so, can we buy more for Gino to use right now in the event he has lost
> his?  If not how should I alter the mount so the radio can still fit onto
> the adapter?
>
>

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Faisal Imtiaz 
Wall Art new method of mounting radios ! 

The installer did this job after a few cases of Tecate ! 

:) 

Faisal Imtiaz 
Snappy Internet & Telecom 
7266 SW 48 Street 
Miami, FL 33155 
Tel: 305 663 5518 x 232 

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net 

> From: "Jaime Solorza" <losguyswirel...@gmail.com>
> To: "Animal Farm" <af@afmug.com>
> Sent: Thursday, October 5, 2017 10:33:48 AM
> Subject: Re: [AFMUG] Fw: AF11x adapters

> that looks broken what u talkin bout Willis

> Jaime Solorza
> Wireless Systems Architect
> 915-861-1390

> On Thu, Oct 5, 2017 at 8:28 AM, Faisal Imtiaz < fai...@snappytelecom.net >
> wrote:

>> Picture of the Jirous Adapter attached

>> rest of the answers are inline below.

>> If you have any questions, feel free to call me.

>> Regards.

>> Faisal Imtiaz
>> Snappy Internet & Telecom
>> 7266 SW 48 Street
>> Miami, FL 33155
>> Tel: 305 663 5518 x 232

>> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

>>> From: "Chuck McCown" < ch...@wbmfg.com >
>>> To: af@afmug.com
>>> Sent: Thursday, October 5, 2017 8:58:26 AM
>>> Subject: [AFMUG] Fw: AF11x adapters

>>> Made Gino some adapters so he can use AF11x radios on Remec mount antennas.
>>> I made the hole pattern to match a plastic slide and snap adapter that came 
>>> with
>>> the radio I have.

>> That should be fine

>>> But not sure if that part is included with all AF11X radios. Gino is asking
>>> about how the radio is supposed to mount to my adapter.
>>> If the slide/snap is not automatically included in all shipments, I need to
>>> alter the bolt pattern to allow mounting of the radio when that part is not
>>> present. He needs some more of these adapters and I want to make sure to 
>>> send
>>> him stuff that does not require any work on his part.
>>> Do you AF11X users know if that slid/snap adapter plate is included with all
>>> radios?

>> Yes that slide/snap adapter is included with each of the AF11x (That is how 
>> they
>> slide/attach to the UBNT dishes).

>>> If so, can we buy more for Gino to use right now in the event he has lost 
>>> his?
>>> If not how should I alter the mount so the radio can still fit onto the
>>> adapter?

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Faisal Imtiaz 
>>If that plastic slide/snap adapter is included with each radio, 

Affirmative ! 

Faisal Imtiaz 
Snappy Internet & Telecom 
7266 SW 48 Street 
Miami, FL 33155 
Tel: 305 663 5518 x 232 

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net 

> From: ch...@wbmfg.com
> To: af@afmug.com
> Sent: Thursday, October 5, 2017 10:33:23 AM
> Subject: Re: [AFMUG] Fw: AF11x adapters

> If that plastic slide/snap adapter is included with each radio, then we should
> be good.
> I designed the spacing and everything assuming that adapter would be used with
> each unit.
> From: Faisal Imtiaz
> Sent: Thursday, October 5, 2017 8:28 AM
> To: af@afmug.com
> Subject: Re: [AFMUG] Fw: AF11x adapters
> Picture of the Jirous Adapter attached
> rest of the answers are inline below.
> If you have any questions, feel free to call me.
> Regards.
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> Miami, FL 33155
> Tel: 305 663 5518 x 232

> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

>> From: "Chuck McCown" <ch...@wbmfg.com>
>> To: af@afmug.com
>> Sent: Thursday, October 5, 2017 8:58:26 AM
>> Subject: [AFMUG] Fw: AF11x adapters

>> Made Gino some adapters so he can use AF11x radios on Remec mount antennas.
>> I made the hole pattern to match a plastic slide and snap adapter that came 
>> with
>> the radio I have.

> That should be fine

>> But not sure if that part is included with all AF11X radios. Gino is asking
>> about how the radio is supposed to mount to my adapter.
>> If the slide/snap is not automatically included in all shipments, I need to
>> alter the bolt pattern to allow mounting of the radio when that part is not
>> present. He needs some more of these adapters and I want to make sure to send
>> him stuff that does not require any work on his part.
>> Do you AF11X users know if that slid/snap adapter plate is included with all
>> radios?

> Yes that slide/snap adapter is included with each of the AF11x (That is how 
> they
> slide/attach to the UBNT dishes).

>> If so, can we buy more for Gino to use right now in the event he has lost 
>> his?
>> If not how should I alter the mount so the radio can still fit onto the
>> adapter?

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Jon Langeler 
Do you have something that fits an old Dragonwave Airpair ?

Jon Langeler
Michwave Technologies, Inc.


> On Oct 5, 2017, at 8:58 AM, Chuck McCown  wrote:
> 
> Made Gino some adapters so he can use AF11x radios on Remec mount antennas. 
>  
> I made the hole pattern to match a plastic slide and snap adapter that came 
> with the radio I have. 
>  
> But not sure if that part is included with all AF11X radios.  Gino is asking 
> about how the radio is supposed to mount to my adapter. 
>  
> If the slide/snap is not automatically included in all shipments, I need to 
> alter the bolt pattern to allow mounting of the radio when that part is not 
> present.  He needs some more of these adapters and I want to make sure to 
> send him stuff that does not require any work on his part. 
>  
> Do you AF11X users know if that slid/snap adapter plate is included with all 
> radios?  If so, can we buy more for Gino to use right now in the event he has 
> lost his?  If not how should I alter the mount so the radio can still fit 
> onto the adapter?
>

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread Jaime Solorza 
that looks broken what u talkin bout Willis

Jaime Solorza
Wireless Systems Architect
915-861-1390

On Thu, Oct 5, 2017 at 8:28 AM, Faisal Imtiaz <fai...@snappytelecom.net>
wrote:

> Picture of the Jirous Adapter attached
>
> rest of the answers are inline below.
>
> If you have any questions, feel free to call me.
>
> Regards.
>
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
> Miami, FL 33155
> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155=gmail=g>
> Tel: 305 663 5518 x 232 <(305)%20663-5518>
>
> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
> supp...@snappytelecom.net
>
> --
>
> *From: *"Chuck McCown" <ch...@wbmfg.com>
> *To: *af@afmug.com
> *Sent: *Thursday, October 5, 2017 8:58:26 AM
> *Subject: *[AFMUG] Fw: AF11x adapters
>
>
> Made Gino some adapters so he can use AF11x radios on Remec mount
> antennas.
> I made the hole pattern to match a plastic slide and snap adapter that
> came with the radio I have.
>
> That should be fine
>
> But not sure if that part is included with all AF11X radios.  Gino is
> asking about how the radio is supposed to mount to my adapter.
> If the slide/snap is not automatically included in all shipments, I need
> to alter the bolt pattern to allow mounting of the radio when that part is
> not present.  He needs some more of these adapters and I want to make sure
> to send him stuff that does not require any work on his part.
> Do you AF11X users know if that slid/snap adapter plate is included with
> all radios?
>
> Yes that slide/snap adapter is included with each of the AF11x (That is
> how they slide/attach to the UBNT dishes).
>
> If so, can we buy more for Gino to use right now in the event he has lost
> his?  If not how should I alter the mount so the radio can still fit onto
> the adapter?
>
>

Re: [AFMUG] Fw: AF11x adapters

2017-10-05 Thread chuck 
If that plastic slide/snap adapter is included with each radio, then we should 
be good.
I designed the spacing and everything assuming that adapter would be used with 
each unit.  

From: Faisal Imtiaz 
Sent: Thursday, October 5, 2017 8:28 AM
To: af@afmug.com 
Subject: Re: [AFMUG] Fw: AF11x adapters

Picture of the Jirous Adapter attached

rest of the answers are inline below.

If you have any questions, feel free to call me.

Regards.

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net




  From: "Chuck McCown" <ch...@wbmfg.com>
  To: af@afmug.com
  Sent: Thursday, October 5, 2017 8:58:26 AM
  Subject: [AFMUG] Fw: AF11x adapters

  Made Gino some adapters so he can use AF11x radios on Remec mount antennas.  
  I made the hole pattern to match a plastic slide and snap adapter that came 
with the radio I have.  
That should be fine
  But not sure if that part is included with all AF11X radios.  Gino is asking 
about how the radio is supposed to mount to my adapter.  
  If the slide/snap is not automatically included in all shipments, I need to 
alter the bolt pattern to allow mounting of the radio when that part is not 
present.  He needs some more of these adapters and I want to make sure to send 
him stuff that does not require any work on his part.  
  Do you AF11X users know if that slid/snap adapter plate is included with all 
radios? 
Yes that slide/snap adapter is included with each of the AF11x (That is how 
they slide/attach to the UBNT dishes).
  If so, can we buy more for Gino to use right now in the event he has lost 
his?  If not how should I alter the mount so the radio can still fit onto the 
adapter?