Re: [BVARC] MSWE - need preformed guy dead end grips
Mark if you can use another hand I am available to help on Sunday. Keith Stolle Ke5ith > On May 18, 2017, at 3:22 PM, mark janzer via BVARC <bvarc@bvarc.org> wrote: > > I've gotten a spool of stainless cable and the stainless wire rope clamps and > thimbles. > AUWC has the long ladder. > > We're set. > > 73 > Mark > K5MGJ > > > From: Michael Monsour <msi...@gmail.com> > To: mark janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB > <bvarc@bvarc.org> > Sent: Thursday, May 18, 2017 2:47 PM > Subject: Re: [BVARC] MSWE - need preformed guy dead end grips > > I found four stainless steel cable clamps. [U bolts with saddle] > If there is a picture, then I can locate stainless hardware which I think is > also used to secure pretty wire rope fencing > Mike Monsour > > On Thu, May 18, 2017 at 12:59 PM, mark janzer via BVARC <bvarc@bvarc.org> > wrote: > The sub has galvanized clamps now and they are in poor shape. Home Depot has > 3/16" stainless clamps. > The dead end grips only come in galvanized, from what I've found. > > Mike, we'll go with your recommendation. > > Mark > K5MGJ > > > From: Michael Monsour via BVARC <bvarc@bvarc.org> > To: mark janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB > <bvarc@bvarc.org> > Cc: Michael Monsour <msi...@gmail.com> > Sent: Thursday, May 18, 2017 12:49 PM > > Subject: Re: [BVARC] MSWE - need preformed guy dead end grips > > On the ends of the horizontal antenna mounts [ the huge ones that go to the > transmitters] are stainless steel clamps > You do not want to use galv fittings > Mike Monsour > > On Thu, May 18, 2017 at 12:40 PM, mark janzer via BVARC <bvarc@bvarc.org> > wrote: > No, the guy clamps are what we're steering away from, if at all possible. The > "Chinese fingercuffs" as Rick Hiller coined them, would be a much better > solution, given the environment and the aesthetics. > > Thanks Scott, > > Mark > K5MGJ > > > From: Scott Medbury via BVARC <bvarc@bvarc.org> > To: "bvarc@bvarc org" <bvarc@bvarc.org>; mark janzer <k5...@yahoo.com> > Cc: Scott Medbury <smedb...@windstream.net> > Sent: Thursday, May 18, 2017 12:26 PM > Subject: Re: [BVARC] MSWE - need preformed guy dead end grips > > I have some heavyweight galvanized guy clamps that may fit the bill. > > Will send more information later. > > Scott KD5FBA > > Sent from my Verizon 4G LTE Droid > On May 18, 2017 11:59 AM, mark janzer via BVARC <bvarc@bvarc.org> wrote: > I'm looking for a couple 3/16" (red label) preformed galvanized steel guy > grips. > > It appears Greybar may have them, but there must be some other local sources. > Maybe someone (on the list) has these gathering dust from their last tower > guying project. > > These will be used for replacing the USS Cavalla wire antenna. > > Thanks for the bandwidth, > Mark > K5MGJ > __ _ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > Message delivered to k5...@yahoo.com > > > > __ _ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > Message delivered to msi...@gmail.com > > > __ _ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > Message delivered to k5...@yahoo.com > > > > __ _ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > Message delivered to msi...@gmail.com > > > > > ___ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to ke...@ke5ith.com ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com
Re: [BVARC] MSWE - need preformed guy dead end grips
I've gotten a spool of stainless cable and the stainless wire rope clamps and thimbles. AUWC has the long ladder. We're set. 73MarkK5MGJ From: Michael Monsour <msi...@gmail.com> To: mark janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB <bvarc@bvarc.org> Sent: Thursday, May 18, 2017 2:47 PM Subject: Re: [BVARC] MSWE - need preformed guy dead end grips I found four stainless steel cable clamps. [U bolts with saddle] If there is a picture, then I can locate stainless hardware which I think is also used to secure pretty wire rope fencing Mike Monsour On Thu, May 18, 2017 at 12:59 PM, mark janzer via BVARC <bvarc@bvarc.org> wrote: The sub has galvanized clamps now and they are in poor shape. Home Depot has 3/16" stainless clamps.The dead end grips only come in galvanized, from what I've found. Mike, we'll go with your recommendation. MarkK5MGJ From: Michael Monsour via BVARC <bvarc@bvarc.org> To: mark janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB <bvarc@bvarc.org> Cc: Michael Monsour <msi...@gmail.com> Sent: Thursday, May 18, 2017 12:49 PM Subject: Re: [BVARC] MSWE - need preformed guy dead end grips On the ends of the horizontal antenna mounts [ the huge ones that go to the transmitters] are stainless steel clamps You do not want to use galv fittings Mike Monsour On Thu, May 18, 2017 at 12:40 PM, mark janzer via BVARC <bvarc@bvarc.org> wrote: No, the guy clamps are what we're steering away from, if at all possible. The "Chinese fingercuffs" as Rick Hiller coined them, would be a much better solution, given the environment and the aesthetics. Thanks Scott, MarkK5MGJ From: Scott Medbury via BVARC <bvarc@bvarc.org> To: "bvarc@bvarc org" <bvarc@bvarc.org>; mark janzer <k5...@yahoo.com> Cc: Scott Medbury <smedb...@windstream.net> Sent: Thursday, May 18, 2017 12:26 PM Subject: Re: [BVARC] MSWE - need preformed guy dead end grips I have some heavyweight galvanized guy clamps that may fit the bill. Will send more information later. Scott KD5FBA Sent from my Verizon 4G LTE DroidOn May 18, 2017 11:59 AM, mark janzer via BVARC <bvarc@bvarc.org> wrote: I'm looking for a couple 3/16" (red label) preformed galvanized steel guy grips. It appears Greybar may have them, but there must be some other local sources. Maybe someone (on the list) has these gathering dust from their last tower guying project. These will be used for replacing the USS Cavalla wire antenna. Thanks for the bandwidth,Mark K5MGJ __ _ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org Message delivered to k5...@yahoo.com __ _ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org Message delivered to msi...@gmail.com __ _ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org Message delivered to k5...@yahoo.com __ _ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org Message delivered to msi...@gmail.com ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com
Re: [BVARC] MSWE - need preformed guy dead end grips
I found four stainless steel cable clamps. [U bolts with saddle] If there is a picture, then I can locate stainless hardware which I think is also used to secure pretty wire rope fencing Mike Monsour On Thu, May 18, 2017 at 12:59 PM, mark janzer via BVARC <bvarc@bvarc.org> wrote: > The sub has galvanized clamps now and they are in poor shape. Home Depot > has 3/16" stainless clamps. > The dead end grips only come in galvanized, from what I've found. > > Mike, we'll go with your recommendation. > > Mark > K5MGJ > > > -- > *From:* Michael Monsour via BVARC <bvarc@bvarc.org> > *To:* mark janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB < > bvarc@bvarc.org> > *Cc:* Michael Monsour <msi...@gmail.com> > *Sent:* Thursday, May 18, 2017 12:49 PM > > *Subject:* Re: [BVARC] MSWE - need preformed guy dead end grips > > On the ends of the horizontal antenna mounts [ the huge ones that go to > the transmitters] are stainless steel clamps > You do not want to use galv fittings > Mike Monsour > > On Thu, May 18, 2017 at 12:40 PM, mark janzer via BVARC <bvarc@bvarc.org> > wrote: > > No, the guy clamps are what we're steering away from, if at all possible. > The "Chinese fingercuffs" as Rick Hiller coined them, would be a much > better solution, given the environment and the aesthetics. > > Thanks Scott, > > Mark > K5MGJ > > > -- > *From:* Scott Medbury via BVARC <bvarc@bvarc.org> > *To:* "bvarc@bvarc org" <bvarc@bvarc.org>; mark janzer <k5...@yahoo.com> > *Cc:* Scott Medbury <smedb...@windstream.net> > *Sent:* Thursday, May 18, 2017 12:26 PM > *Subject:* Re: [BVARC] MSWE - need preformed guy dead end grips > > I have some heavyweight galvanized guy clamps that may fit the bill. > > Will send more information later. > > Scott KD5FBA > > *Sent from my Verizon 4G LTE Droid* > On May 18, 2017 11:59 AM, mark janzer via BVARC <bvarc@bvarc.org> wrote: > > I'm looking for a couple 3/16" (red label) preformed galvanized steel guy > grips. > > It appears Greybar may have them, but there must be some other local > sources. Maybe someone (on the list) has these gathering dust from their > last tower guying project. > > These will be used for replacing the USS Cavalla wire antenna. > > Thanks for the bandwidth, > Mark > K5MGJ > > __ _ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > <http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org> > Message delivered to k5...@yahoo.com > > > > __ _ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > <http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org> > Message delivered to msi...@gmail.com > > > ___ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to k5...@yahoo.com > > > > ___ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to msi...@gmail.com > > ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com
Re: [BVARC] MSWE - need preformed guy dead end grips
The sub has galvanized clamps now and they are in poor shape. Home Depot has 3/16" stainless clamps.The dead end grips only come in galvanized, from what I've found. Mike, we'll go with your recommendation. MarkK5MGJ From: Michael Monsour via BVARC <bvarc@bvarc.org> To: mark janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB <bvarc@bvarc.org> Cc: Michael Monsour <msi...@gmail.com> Sent: Thursday, May 18, 2017 12:49 PM Subject: Re: [BVARC] MSWE - need preformed guy dead end grips On the ends of the horizontal antenna mounts [ the huge ones that go to the transmitters] are stainless steel clamps You do not want to use galv fittings Mike Monsour On Thu, May 18, 2017 at 12:40 PM, mark janzer via BVARC <bvarc@bvarc.org> wrote: No, the guy clamps are what we're steering away from, if at all possible. The "Chinese fingercuffs" as Rick Hiller coined them, would be a much better solution, given the environment and the aesthetics. Thanks Scott, MarkK5MGJ From: Scott Medbury via BVARC <bvarc@bvarc.org> To: "bvarc@bvarc org" <bvarc@bvarc.org>; mark janzer <k5...@yahoo.com> Cc: Scott Medbury <smedb...@windstream.net> Sent: Thursday, May 18, 2017 12:26 PM Subject: Re: [BVARC] MSWE - need preformed guy dead end grips I have some heavyweight galvanized guy clamps that may fit the bill. Will send more information later. Scott KD5FBA Sent from my Verizon 4G LTE DroidOn May 18, 2017 11:59 AM, mark janzer via BVARC <bvarc@bvarc.org> wrote: I'm looking for a couple 3/16" (red label) preformed galvanized steel guy grips. It appears Greybar may have them, but there must be some other local sources. Maybe someone (on the list) has these gathering dust from their last tower guying project. These will be used for replacing the USS Cavalla wire antenna. Thanks for the bandwidth,Mark K5MGJ __ _ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org Message delivered to k5...@yahoo.com __ _ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org Message delivered to msi...@gmail.com ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to k5...@yahoo.com ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com
Re: [BVARC] MSWE - need preformed guy dead end grips
Here's a link, looking for a local supplier: Sabre C40-058-011 3/16" Dead-End Grip, Left-Hand Lay | TESSCO | | | | || | | | | | Sabre C40-058-011 3/16" Dead-End Grip, Left-Hand Lay | TESSCO SABRE 3/16" dead-end grip. Left- hand lay galvanized steel. | | | | From: mark janzer via BVARC <bvarc@bvarc.org> To: BRAZOS VALLEY AMATEUR RADIO CLUB <bvarc@bvarc.org> Cc: mark janzer <k5...@yahoo.com> Sent: Thursday, May 18, 2017 12:40 PM Subject: Re: [BVARC] MSWE - need preformed guy dead end grips No, the guy clamps are what we're steering away from, if at all possible. The "Chinese fingercuffs" as Rick Hiller coined them, would be a much better solution, given the environment and the aesthetics. Thanks Scott, MarkK5MGJ From: Scott Medbury via BVARC <bvarc@bvarc.org> To: "bvarc@bvarc org" <bvarc@bvarc.org>; mark janzer <k5...@yahoo.com> Cc: Scott Medbury <smedb...@windstream.net> Sent: Thursday, May 18, 2017 12:26 PM Subject: Re: [BVARC] MSWE - need preformed guy dead end grips I have some heavyweight galvanized guy clamps that may fit the bill. Will send more information later. Scott KD5FBA Sent from my Verizon 4G LTE DroidOn May 18, 2017 11:59 AM, mark janzer via BVARC <bvarc@bvarc.org> wrote: I'm looking for a couple 3/16" (red label) preformed galvanized steel guy grips. It appears Greybar may have them, but there must be some other local sources. Maybe someone (on the list) has these gathering dust from their last tower guying project. These will be used for replacing the USS Cavalla wire antenna. Thanks for the bandwidth,Mark K5MGJ ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to k5...@yahoo.com ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to k5...@yahoo.com ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com
Re: [BVARC] MSWE - need preformed guy dead end grips
No, the guy clamps are what we're steering away from, if at all possible. The "Chinese fingercuffs" as Rick Hiller coined them, would be a much better solution, given the environment and the aesthetics. Thanks Scott, MarkK5MGJ From: Scott Medbury via BVARC <bvarc@bvarc.org> To: "bvarc@bvarc org" <bvarc@bvarc.org>; mark janzer <k5...@yahoo.com> Cc: Scott Medbury <smedb...@windstream.net> Sent: Thursday, May 18, 2017 12:26 PM Subject: Re: [BVARC] MSWE - need preformed guy dead end grips I have some heavyweight galvanized guy clamps that may fit the bill. Will send more information later. Scott KD5FBA Sent from my Verizon 4G LTE DroidOn May 18, 2017 11:59 AM, mark janzer via BVARC <bvarc@bvarc.org> wrote: I'm looking for a couple 3/16" (red label) preformed galvanized steel guy grips. It appears Greybar may have them, but there must be some other local sources. Maybe someone (on the list) has these gathering dust from their last tower guying project. These will be used for replacing the USS Cavalla wire antenna. Thanks for the bandwidth,Mark K5MGJ ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to k5...@yahoo.com ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com
Re: [BVARC] MSWE - need preformed guy dead end grips
I have some heavyweight galvanized guy clamps that may fit the bill. Will send more information later. Scott KD5FBA Sent from my Verizon 4G LTE Droid On May 18, 2017 11:59 AM, mark janzer via BVARCwrote: > > I'm looking for a couple 3/16" (red label) preformed galvanized steel guy > grips. > > It appears Greybar may have them, but there must be some other local sources. > Maybe someone (on the list) has these gathering dust from their last tower > guying project. > > These will be used for replacing the USS Cavalla wire antenna. > > Thanks for the bandwidth, > Mark > K5MGJ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com
[BVARC] MSWE - need preformed guy dead end grips
I'm looking for a couple 3/16" (red label) preformed galvanized steel guy grips. It appears Greybar may have them, but there must be some other local sources. Maybe someone (on the list) has these gathering dust from their last tower guying project. These will be used for replacing the USS Cavalla wire antenna. Thanks for the bandwidth,Mark K5MGJ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com