[Elecraft] K3 Noise Blanker problem?
Hello all..This AM on 160 meters there was a station CQing on 1.820.6 with a fundamental freq signal strength of S9 on my K3. I also found (with the NB on) that I could hear him Q5 but very weak on 1.810.6 and the same S 0 reading but perfectly Q5 on 1.830.6. I turned the noise blanker off and of course the images disappeared. Is this a know problem when using the NB or is this just with my radio after a recent factory alignment? I have had a K3 for years and never noticed anything like that before but then again this AM was very quiet on 160M and I had the NB on because I could hear a distant tick tick of an electric fence. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 NB problem
I discovered the source of a “noise” I was complaining about on 80M cw this AM. I finally noticed that it would always come on at exactly the time VK9WA said “UP”!! and varied in intensity and duration until he answered someone..at which time the noise was gone and S meter returned to S1!!Seems like the NB settings on the K3 are causing IMD and phase noise from the pileup up the Band a bit to sound like rain static and jump to a level of S5-6 on the K3 meter! Never ran into that before with a K3... Then again, except for this new electric fence pulse, I never needed to use the NB for anything at this previously dead quiet location.Any ideas on what settings I should use or try for this electric fence noise? Possibly the settings that I am using are too aggressive and would cause this? Regards Larry K1UO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3/0 and RTTY
I have a K3/0 and remote K3 setup using the RemoteRig boxes from Elecraft. SSB/CW is fine. When I switch the K3/0 to DATA mode and set up the onboard text decode and FSK to 45Bps . I get nothing but gibberish.. There is NO decoding possible for RTTY and the CW-RTTY does not key the remote unit either. 1: Does this feature even work when in the Remote configuration like this? Also, the minute I switch to the DATA mode with the K3/0 , I get a ‘-S’ indicator just below the DATA Mode indicator and then under that is the ‘T’ indicating TEXT Mode is on. 2: What does the ‘-S’ mean? cant find it in the manual. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3/0 and RTTY
Got the CONFIG: SYNC DT off finally...Thanks so much. RX Signal levels on RTTY are S9+..still gibberish decode over the Remote system? -Original Message- From: Wayne Burdick Sent: Sunday, February 08, 2015 2:43 PM To: Larry - K1UO Cc: Elecraft Reflector Subject: Re: [Elecraft] K3/0 and RTTY Both RTTY and CW decode should work remotely. Use a narrow filter passband tune the signal in carefully using the CWT meter scale (pgs. 33 and 34 of the owner's manual). Decode accuracy is affected by noise, fading, and interference, but should work as long as the signal is correctly tuned in and has a high enough S/N ratio. CW decode is more difficult in the presence of noise and sloppy timing. If you see the -S icon on the LCD, you are in sync-data mode, which is typically used for AMTOR or PACTOR (pg. 32). These modes require faster turn-around times, which the K3 facilitates by not switching crystal filters between transmit and receive. The only way to get the K3 into sync-data mode is to assign the CONFIG:SYNC DT menu entry to a programmable function switch. You may have done this accidentally. To get it back out of this mode, temporarily assign this menu entry to a programmable switch, exit the menu, then press that switch. This should turn off the -S. 73, Wayne N6KR On Feb 8, 2015, at 11:31 AM, Larry - K1UO k...@tds.net wrote: I have a K3/0 and remote K3 setup using the RemoteRig boxes from Elecraft. SSB/CW is fine. When I switch the K3/0 to DATA mode and set up the onboard text decode and FSK to 45Bps . I get nothing but gibberish.. There is NO decoding possible for RTTY and the CW-RTTY does not key the remote unit either. 1: Does this feature even work when in the Remote configuration like this? Also, the minute I switch to the DATA mode with the K3/0 , I get a ‘-S’ indicator just below the DATA Mode indicator and then under that is the ‘T’ indicating TEXT Mode is on. 2: What does the ‘-S’ mean? cant find it in the manual. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3/0 and RTTY
I should also mention we are using Fiber to the home for Inet here and 10MB DSL link at the remote Typical ping times are 50MS range and Latency range is usually 10-20 range and Jitter 0-4 range usually 0 as it was a moment ago when tested. Not sure why RTTY decode is a problem using the setup mentioned in the manual. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB used K3
Looking for a K3 to pair with my K3/0 and RemoteRig. Private email what you might have. k1uo at arrl dot net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA1000
On Dec 23, 2014, at 7:15 PM, KG5EJU kg5...@dlaab.com wrote: Very new to Elecraft, just own a W2, but looking long at the KPA500. Heard a couple rumors that a 1000 Watt unit was coming…. Not. Keep those ideas coming :) 73, Wayne N6KR Just buy their new kpa ‘COMBINER’ and add a second KPA500 and you got your KPA1000! Merry Christmas I say... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3/0 or Mini WANTED:
If you replaced your K3/0 with a K3/0 mini, or are not using your K3/0, I may be interested in purchasing it. Actually interested in the K3 mini if you have one and are not using it. I am looking for the K3 control RRC and cables as well. Regards __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [K3] Remote Rig number difference?
What is the difference between the Remote Rig number for the K3 – Twins on the RRC Website RRC-1258 MKII’s and the Remote Rig units for remoting the K3’s that are designated RRC-1256 in all the Elecraft literature? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K3] Remote Rig number difference?
Thanks Mitch.. I went to the website you provided but I don’t find the RRC 1256 units shown anywhere. The webswitches are called 1216 units. The 1256,s listed in Elecraft manuals appear to look like 1258 units.. Maybe the 1258's are just newer units with newer features? regards Larry K1UO -Original Message- From: Mitch Wolfson DJØQN Sent: Monday, December 22, 2014 6:37 PM To: Larry - K1UO ; Elecraft Reflector Subject: Re: [Elecraft] [K3] Remote Rig number difference? The 1258's are the RemoteRig RRC's required for remote operation, the 1256's are Webswitches, a completely different product line. I use the 1258's for my K3 remote control, as well as a 1256 for my rotor, raising and lowering my mast and turning my SPE 2K-FA on and off. All this information is available on the RemoteRig web site at http://www.remoterig.com/ and you can received detailed answers to any questions you may have on the RemoteRig forum at http://www.remoterig.com/forum/index.php 73, Mitch DJ0QN Mitch Wolfson DJØQN / K7DX Neubiberger Str. 21, 85640 Putzbrunn Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436 Echolink: 3001 - IRLP: 5378 On 22.12.2014 16:41, Larry - K1UO wrote: What is the difference between the Remote Rig number for the K3 – Twins on the RRC Website RRC-1258 MKII’s and the Remote Rig units for remoting the K3’s that are designated RRC-1256 in all the Elecraft literature? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dj...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPAK3AUX Cable Kit for sale
New Optional KPA500 to K3 Aux cable kit P/N KPAK3AUX. Never used still in bag. $25.00 shipped CONUS only. k1uo (at) uninets (dot) net. Reply offline please. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA500 Combiner
Well...did Elecraft release their KPA-CO1 Amplifier Combiner for combining two of their KPA500’s at Dayton? LOL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB: KPA500
If anyone is considering selling/upgrading their KPA500 please contact me offline. call (at) arrl (dot) net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA-500 Combiner
Since a KPA-1000 or KPA-1500 have not come to fruition..how about making a Elecraft KPA-500 Combiner for stacking either two or three KPA 500's? Sell more KPA500's as required to go with the RF Combiner __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] FOR SALE ..P3-F e/w SVGA option
excellent condition, latest firmware, original owner, purchased last Fall. $750.00 + shipping. Please inquire off line. -- View this message in context: http://elecraft.365791.n2.nabble.com/FOR-SALE-P3-F-e-w-SVGA-option-tp7565194.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Accessories for sale
All are spoken for - thanks all. -- View this message in context: http://elecraft.365791.n2.nabble.com/Accessories-for-sale-tp7157105p7159027.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Accessories for sale
I have a XG2 and a PR-6. please contact off list if interested k1uo at uninet dot net -- View this message in context: http://elecraft.365791.n2.nabble.com/Accessories-for-sale-tp7157105p7157105.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Accessories for sale
The PR6 is spoken for... thanks -- View this message in context: http://elecraft.365791.n2.nabble.com/Accessories-for-sale-tp7157105p7157184.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Change in the P3 noise floor
A question for you Tekkies. Today, for the first time I can recall, I widened the P3 span to the full 200K bandwidth display. While listening on aux receive antennas for 160 meters, I could see a half moon shaped noise floor that started gradually rising from S0 at about 1.775Mhz, peaking around S3 at about 1.830 and slowly declining again until back to S0 level at around 1.875Mhz (A nice even arc of noise). Would this be noise from my series fed 115ft top loaded 160/80M xmit tower that I am seeing? I have a vacuum relay that disconnects the feed /radials from the tower when receiving and I didnt see much if any difference when switching the relay in and out manually. curious now as to what I am seeing. Thanks, Larry K1UO -- View this message in context: http://elecraft.365791.n2.nabble.com/Change-in-the-P3-noise-floor-tp7104135p7104135.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] Is there a KRC3 in the works?
I believe a KRC-3 Band decoder than is fully compatible with the K3 is now in order? :-) Its getting so that half the available Band decoders (or more)do not support 6M or even 60 meters for that matter and those that do lack provision for manual band selection so if something happens with the pc or serial port one cannot even change antennas. The software and documentation seem to have not fully caught up to use the KRC2 with a K3 and various remote relay switch boxes. Just thinking out loud. 73 Larry k1UO -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Is-there-a-KRC3-in-the-works-tp6863979p6863979.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 for Sale
For Sale: Fully Loaded K3 I have a factory assembled K3 and accessories. I am the original owner, unit is in excellent condition (10 of 10) and was delivered to me at the end of Dec 2008. It has been factory updated with all Elecraft hardware changes and latest software. K3 was ordered/equipped as follows: Listed by Elecraft P/N’s. K3/100F KAT3-F KBPF3 (in sub RX side) KDVR3 KRX3-F KPCA-F extra power cable KXV3 (updated at factory) KTCX03-1 KFL3A-2.8K (both RX’s) KFL3A-1.8K (both RX’s) KFL3A-1.0K (both RX’s) KFL3A-500(both RX’s) KFL3A-200(both RX’s) KFLMATCH KUSB CABLE PR6 Preamp Proset-K2 (from Elecraft) K3- ASSYMAN Rev G K3 OMANRev D2 A $5200+ value for $3900 shipped/insured CONUS only * Also have SignaLink USB and factory cable for connecting to K3 for Digital modes and a New (20 minutes used) Yamaha CM500 headset also available. Add $100 for both. -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-for-Sale-tp6153550p6153550.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 at VP8ORK
I worked them during the qrm height of the CQ160 contest, using a K3 of course, but even that would not have been possible without propagation existing like Bill said.Best propagation to the NE region appears to be around the 0400 to 0500 time frame although they have been heard and worked much earlier. -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-at-VP8ORK-tp5978466p5982608.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] FORSALE: LP-PAn
I have a new factory assembled LP-Pan with built in preamp for use with the K3. Also a nearly new E-MU 0202 Sound card and all connecting cables to plug and play with your K3. $280 firm...shipped CONUS only. k1uo (at) arrl.net -- View this message in context: http://elecraft.365791.n2.nabble.com/FORSALE-LP-PAn-tp5880273p5880273.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] AFSK
I'm unable to transmit an AFSK signal in DATA mode, although I can transmit via the same LINE IN in DATA A mode. The line output from my SignaLink USB soundcard does have the audio signal on it and is connected to the Line In mono jack on the K3. For MIC SEL in configuration, I have Line In selected. DATA MD is set to AFSK A and shows 45 bps. PITCH is set to 915-170. Using MMTTY software and the latest K3 firmware the K3 goes into transmit mode (audio signal is present on cable feeding K3's Line In) but no modulation. What am I missing?? I should mention this was working as early as 3 weeks ago and I have NO idea what has changed.Just reloaded the K3 firmware and checked all MTTY option parameters but all look good and as I mentioned..Data A xmits the RTTY signals but not AFSK. Larry K1UO -- View this message in context: http://elecraft.365791.n2.nabble.com/AFSK-tp5845592p5845592.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] emu-0202 sound card
anyone got an emu-0202 sound card they want to part with? thanks Larry K1UO (at) uninet.net -- View this message in context: http://elecraft.365791.n2.nabble.com/emu-0202-sound-card-tp5717103p5717103.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] For Sale - P3-F
Factory built P3 Panadapter for K3 with latest firmware and all cables, manual. $650 shipped CONUS. direct inquires only please ...to k1uo (at) uninet.net -- View this message in context: http://elecraft.365791.n2.nabble.com/For-Sale-P3-F-tp5653063p5653063.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] For Sale - P3-F
P3 is SOLD . Thanks -- View this message in context: http://elecraft.365791.n2.nabble.com/For-Sale-P3-F-tp5653063p5653385.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 question on the noise floor
Ross the only way I can simulate that behavior on my P3 is by disconnecting the P3 to K3 cable. Doing so causes the bootloader screen to come up immediately when trying to do a ref lvl adjustment. You may have a loose cable or pin not making connection? Larry K1UO Ross-33 wrote: Jim, in his reply stated that the level on the screen should go down to -150dbm. As I stated in my email, whenevr I try to change the level, It comes up with the Boot loader screen, Not a lot of help. Ideas please as I need to lower the noise floor on the P3. Thanks Ross ZL1WN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-question-on-the-noise-floor-tp5557268p5558754.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] LP Pan versus P3 Panadapters
Bill, I can tell you that just last night, on 160 meters, I copied 2 very weak stations perfectly Q5 that did not show on the P3 waterfall. Now, Its entirely possible its my adjustment skills but I dont think so. Yes..the K3 IF Mod was factory installed. This has happened more than once. For some reason I was expecting the P3 to show these very weak signals better than I could find them myself while tuning but no amount of adjustment so far will do this. I may be expecting too much? Just so you know what anothers experience has been so far. 73 I too would like to see details of the improvement over LPan etc. I am a long time user of SDR/computer panadapters for use in detecting very weak signals at UHF/VHF/microwave. I use a Softrock on the K3 IF port since I got my K3 a year ago. I have yet to see one report regarding weak sig detection with the P3 after many requests to the initial testers of the P3. ANYONE out there looking for weak weak sigs with a P3?? 73 Bill K0AWU EN37ed -- View this message in context: http://elecraft.365791.n2.nabble.com/LP-Pan-versus-P3-Panadapters-tp5528469p5530182.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] LP Pan versus P3 Panadapters
Hi Alan, Ill admit I didnt try a narrower span and I normally use the +-15Khz setting (30Khz span) on the 160 meter cw band. Ill try narrowing it up and see if it picks up the very weak signals but I dont want to operate on a too narrow span or, as they say, it becomes much less useful to me. 73 Larry However the carrier is clearly visible on the waterfall if I set the P3 span to 2 kHz. As I increase the span the signal gradually gets harder and harder to see. Above about 30 kHz or so the signal disappears into the noise. So that's the trick. Narrow the span to make those signals pop out of the noise. 73, Alan N1AL -- View this message in context: http://elecraft.365791.n2.nabble.com/LP-Pan-versus-P3-Panadapters-tp5528469p5532080.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 Owners Manual
Is the P3 manual posted yet? if not, is it expected to be available soon? -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Owners-Manual-tp5156358p5156358.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 rig control program
Back around the Dec/Jan 2010 timeframe someone was writing a pc control program dedicated for pc control of the K3 and was offering a free trial period to solicit input/changes etc. until the final $commercial$ version was ready sometime around March of this year. I can't find the software info or author in the archives. Could someone refresh my old memory as to where the link is to this software. private e-mail is probably best. thanks -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-rig-control-program-tp5019856p5019856.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft Amps
Whats really needed in a new amplifier would be a nice 6 Meter Solid State amp from Elecraft to match up with the K3. Maybe something in the 500-800 watt range. -- View this message in context: http://n2.nabble.com/Elecraft-Amps-tp4558598p4560802.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft Amps
Larry K1UO wrote: Whats really needed in a new amplifier would be a nice 6 Meter Solid State amp from Elecraft to match up with the K3. Maybe something in the 500-800 watt range. Let me clarify...A 6M amp only... not as p/o the existing 160-6 amp selections currently available. Seems like its a niche that needs to be filled ..what with all the ease of getting on 6M nowdays. Also M2 does not have a 6M production amp at this time. -- View this message in context: http://n2.nabble.com/Elecraft-Amps-tp4558598p4562147.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] K3 and SPE Expert AMP
Doug, If you already have remote antenna switching, I would use the K3 bcd data to do the antenna switching prior to the amplifier rf sensing the band. this would prevent transmitting into a wrong antenna...unless, of course, you plan on using the built in antenna switch of the SPE then I would rely on the K3 band data provided to the amp rather than rf sensing. 73 and good luck Larry K1UO I am considering the Expert amplifier because of instant turnon, smaller size and reduced weight. Does the Expert amplifier require a tie in to the transceiver other than RF input and key out to determine which frequency to tune to? The ACOM 2000A does this automatically sensing the frequency from the RF Input and there is not need for an interveing PC. Is it the case that the Expert amplifier needs a separate input defining the operating frequency and band? -- View this message in context: http://n2.nabble.com/K3-and-SPE-Expert-AMP-tp4281796p4285441.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] M1-M4 Quick memories
when all else fails..reload software!! Seems it does sometimes get tired 8^) Larry K1UO wrote: I initially set up my K3 quick memories to store CW and SSB info and also set up keys 1-9 for quick band changes to CW or Phone. normally when on a band, if I wanted to save additional band info,I could hit V-M and have M1 appear in place of the second vfo window...now I get a memory number instead. How do I get back to the quick memory? I follow the manual instructions but I cant seem to get back to the M1-M4 area instead of the general memory area. clear as mud? -- View this message in context: http://n2.nabble.com/M1-M4-Quick-memories-tp3925899p3931559.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] M1-M4 Quick memories
Let me try and clarify. When I wanted to save some parameter setup on a particular band, I used VM to save the info in the M1 or M2 keys for a quick update of band information. Now when I use that function all I get is memory position 00 displayed. Nothing I do gets me back to the M1-M4 and I can no longer save my changes to each band so when I press, for example, MV then 1 it loads the 160M setup info from the M1 or M2 keys. -- View this message in context: http://n2.nabble.com/M1-M4-Quick-memories-tp3925899p3926847.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] M1-M4 Quick memories
Hi Julian.MEM 0-9 is set to Band Sel I still go to the bands when I push MV and the keys 1-9 to go to the programmed bands and M1 or M2 does set the saved parameters for those bands either cw or ssbBUT...I can no longer add or make changes to the parameters stored in M1 or M2 by pressing VM and the appropriate memory key. I go straight to the selectable memory bank instead. Hope thats clear? 73 Larry K1UO - Original Message - From: Julian, G4ILO [via Elecraft] To: Larry K1UO Sent: Sunday, November 01, 2009 7:52 AM Subject: Re: [Elecraft] M1-M4 Quick memories Larry K1UO wrote: Let me try and clarify. When I wanted to save some parameter setup on a particular band, I used VM to save the info in the M1 or M2 keys for a quick update of band information. Now when I use that function all I get is memory position 00 displayed. Nothing I do gets me back to the M1-M4 and I can no longer save my changes to each band so when I press, for example, MV then 1 it loads the 160M setup info from the M1 or M2 keys. Is the configuration option MEM 0-9 set to nor or band sel? Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View message @ http://n2.nabble.com/M1-M4-Quick-memories-tp3925899p3926863.html To unsubscribe from Re: M1-M4 Quick memories, click here. -- View this message in context: http://n2.nabble.com/M1-M4-Quick-memories-tp3925899p3926972.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] FORSALE: Elecraft Hexkey
New condition Elecraft special edition Hexkey s/n E433 for sale $150 plus ship (probably $7-8 USPS Priority) contact offline if interested. Larry K1UO -- View this message in context: http://n2.nabble.com/FORSALE-Elecraft-Hexkey-tp3924002p3924002.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Hexkey is SOLD - Thanks
-- View this message in context: http://n2.nabble.com/Hexkey-is-SOLD-Thanks-tp3924299p3924299.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] M1-M4 Quick memories
I initially set up my K3 quick memories to store CW and SSB info and also set up keys 1-9 for quick band changes to CW or Phone. normally when on a band, if I wanted to save additional band info,I could hit V-M and have M1 appear in place of the second vfo window...now I get a memory number instead. How do I get back to the quick memory? I follow the manual instructions but I cant seem to get back to the M1-M4 area instead of the general memory area. clear as mud? -- View this message in context: http://n2.nabble.com/M1-M4-Quick-memories-tp3925899p3925899.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] E-Ham listing of KPA1500 gone
In that case KPA800 is vaporware also so review that one. BTW: I put in a tongue in cheek review on the KPA1500 on e-ham about 8 months ago,,It lasted all of a day before it was removed...so Elecraft is watching! - Original Message - From: Terry Schieler (via Nabble) To: Larry K1UO Sent: Tuesday, July 07, 2009 12:21 PM Subject: Re: [Elecraft] E-Ham listing of KPA1500 gone Difficult to solicit reviews on a product that doesn't exist. ;o) -Original Message- From: Larry K1UO [mailto:k...@...] Sent: Monday, July 06, 2009 1:35 PM To: elecr...@... Subject: [Elecraft] E-Ham listing of KPA1500 gone the KPA-1500 listing on the Amplifier review page is gone..KPA800 listing remains...An omen? -- View this message in context: http://n2.nabble.com/E-Ham-listing-of-KPA1500-gone-tp3214738p3214738.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:elecr...@... This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View message @ http://n2.nabble.com/E-Ham-listing-of-KPA1500-gone-tp3214738p3220299.html To unsubscribe from E-Ham listing of KPA1500 gone, click here. -- View this message in context: http://n2.nabble.com/E-Ham-listing-of-KPA1500-gone-tp3214738p3221325.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] E-Ham listing of KPA1500 gone
the KPA-1500 listing on the Amplifier review page is gone..KPA800 listing remains...An omen? -- View this message in context: http://n2.nabble.com/E-Ham-listing-of-KPA1500-gone-tp3214738p3214738.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 firmware and AGC question
Plug the headphones in and leave them plugged in, then go to the Menu and find the SPKR+PH Setting and set it to YES. Any time you want to turn the speaker(s) off, set SPKR+PH to NO. And better yet is to program the above SPKR+PH setting into the PF1 or PF2 special function key and turn the speaker on/off with a simple push of the PF key! 73 Larry K1UO -- View this message in context: http://n2.nabble.com/K3-firmware-and-AGC-question-tp2734329p2737532.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] What is the status of Elecraft's power amps
I'm glad you asked Toby but I think we will have to wait until Dayton to see! 8( Hopefully the amplifiers availability are announced then as I did plan on ordering the KPA1500 for sureSeems like something will come of them...the initial introduction of the amplifiers came at Dayton 2 years ago I believe. Good luck Is there any chance that the KPA-1500 and/or KPA-800 power amplifiers will be released in the foreseeable future, or has the project been shelved permanently? vy 73 de toby __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View this message in context: http://n2.nabble.com/What-is-the-status-of-Elecraft%27s-power-amps-tp2568268p2570465.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] What is the status of Elecraft's power amps
Hi Ken, The Panadapter would be ok also!!! 73 Larry K1UO - Original Message - From: Ken Kopp-3 (via Nabble) To: Larry K1UO Sent: Wednesday, April 01, 2009 1:39 PM Subject: [Elecraft] What is the status of Elecraft's power amps Perhaps they ... or better yet ... the panadapter will appear at Visalia ... as was the case for the K3. (:-) 73! Ken Kopp - K0PP elecraftcov...@... http://tinyurl.com/7lm3m5 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:elecr...@... This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- This email is a reply to your post @ http://n2.nabble.com/What-is-the-status-of-Elecraft%27s-power-amps-tp2568268p2570522.html You can reply by email or by visting the link above. -- View this message in context: http://n2.nabble.com/What-is-the-status-of-Elecraft%27s-power-amps-tp2568268p2570553.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Transmit when switching from DATA to AM mode?
I also have confirmed on K3 #921 the behavior described by KB8AP below. This radio was recently received from the factory 12/20/08 with MCU Version 2.73 installed. VOX is on when bandswitching and no 6K filter is installed so I do get the ERR TXF along with a 1 sec or so transmit light. -- View this message in context: http://n2.nabble.com/Transmit-when-switching-from-DATA-to-AM-mode--tp1826800p1886583.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Transmit when switching from DATA to AM mode?
VOX is on when bandswitching and no 6K filter is installed so I do get the ERR TXF along with a 1 sec or so transmit light. Make that MODE switching from DATA to AM ...Not bandswitching. -- View this message in context: http://n2.nabble.com/Transmit-when-switching-from-DATA-to-AM-mode--tp1826800p1886953.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Mystery Part
Brad Johnson-11 wrote: I've received several responses regarding the mystery part, most of which are associating it with the speaker shield. I'd hang on to it Brad...might go to Eric's cup holder! 8^)) -- View this message in context: http://www.nabble.com/K3-Mystery-Part-tp18289309p18297498.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] New Ke and KRX3 ship info posted
-- View this message in context: http://www.nabble.com/New-Ke-and-KRX3-ship-info-posted-tp18145652p18145652.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] New K3 and KRX3 ship info posted
Oops...make that K3 info!...Never was good at hitting the right number keys. Larry K1UO wrote: -- View this message in context: http://www.nabble.com/New-K3-and-KRX3-ship-info-posted-tp18145652p18145676.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] F to C
DOUGLAS ZWIEBEL wrote: Just tattoo this onto your forearm - if the PA Temp is under 100F, don't worry about it. F C 200 93 195 91 Sorry Dougno more roomthe resistor color code is already there 8^) -- View this message in context: http://www.nabble.com/F-to-C-tp17957064p17980056.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] server access denied
Forbidden You don't have permission to access /elecraft@mailman.qth.net/maillist.html on this server. Apache/2.2.4 (Ubuntu) mod_python/3.3.1 Python/2.5.1 PHP/5.2.3-1ubuntu6.3 Server at www.mail-archive.com Port 80 Started getting this message after the weekend. Anyone else getting this on the mailman server? -- View this message in context: http://www.nabble.com/server-access-denied-tp17498200p17498200.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] The K3 in comprison to the Big Guns
I would willingly pay a lot for a K3 in a 19 case. Simon Brown, HB9DRV I think you just described the beginnings of a K4 8^) -- View this message in context: http://www.nabble.com/The-K3-in-comprison-to-the-Big-Guns-tp17267266p17272252.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 2nd rcvr testing...
So Lyle... How is the testing going on the second receiver for the K3? Any showstoppers that will further delay distribution? 73 Larry K1UO -- View this message in context: http://www.nabble.com/2nd-rcvr-testing...-tp16850993p16850993.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Katiegram arrived
Todd Gahagan wrote: I guess I had better go with the flow and announce this. I received my Katiegram today 04-09-08. Order placed 10-22-2007. One of the nicest email I have ever received!! ___ Send it back You are way ahead of the listed shipping status 8^) 73 K1UO -- View this message in context: http://www.nabble.com/Katiegram-arrived-tp16598598p16598785.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] 6 Meter Antennas - OT
The PAR 6M antenna is the one I was after also Dave, but due to Government contract overload..Dale at PAR Electronics has suspended all amateur antenna manufacturing untill further notice! Dale told me it would most likely be into Fall before resuming any amateur antenna work. 73, Larry K1UO Dave Agsten wrote: I'd look a PAR Electronics OA-50s for a horizontally polarized omni-directional antenna before the M2s or KU4ABs. I've tried all three and the OA-50 is the only one I still have. 73, Dave N8AG You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://www.nabble.com/RE%3A-6-Meter-Antennas---OT-tp16509574p16512392.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 SubRX Photo?
KRX3 Status Update from Wayne March 11, 2008 We expect to receive the initial batch (20) of production KRX3 modules this week. We'll post a photo as soon as they arrive. Did I miss the photos? Hope all is going well with the modules and initial testing. While we are at it...Any updates on how the prototype KPA-1500's are doing.. he asked TIC! keep up the great efforts. Larry K1UO -- View this message in context: http://www.nabble.com/K3-SubRX-Photo--tp16144964p16144964.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Printoing Manuals...
I'm surprised that no-one else seems to have run into copyright problems when trying to have electronic manuals hard copied and bound. I'm having that problem with Staples with the manual for my LP-100A wattmeter! e-mailed Larry, LP, for permission to get copied and will see how that flies. YMMV Larry K1UO -- View this message in context: http://www.nabble.com/Re%3A-Printoing-Manuals...-tp15920710p15922152.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Portable Antennae
While I await my K3 (sometime in June) I would like to construct a good portable antennae to use while camping (RV camping). If it is a dipole it will need to be short enough to fit in the footprint of a campsite. Any recommendations.maybe even for a vertical? 73 God Bless! Ken/NO4D Ken, Take a look at either the End Fedz or Buddi Pole portable antennas. Possibly one of those may suit your needs. Good luck Larry K1UO -- View this message in context: http://www.nabble.com/Portable-Antennae-tp15764570p15766866.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] ARRL K3 review for Apr QST posted
Members can print out the 3 page review from the ARRL web site. -- View this message in context: http://www.nabble.com/ARRL-K3-review-for-Apr-QST-posted-tp15743968p15743968.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Invoice Confirmation
Congrats Larry...Now that Panadapter project can really be fine tuned! Larry Phipps wrote: I received my email Wednesday night, and my K3 shipped Thursday (ordered 4-30, no deposit). Another guy received his notice Wednesday night as well, and his shipped Friday (ordered 5-5, no deposit). Both our emails were received in the evening (his at almost 11pm), so that confirms that they are working OT to get the radios out. Counting yours, Roy, that makes 9 days worth of orders notified in a 4 day period. Seems like things are clipping along. 73, Larry N8LP Date: Sun, 27 Jan 2008 11:09:12 -0500 From: Roy Morris [EMAIL PROTECTED] Subject: [Elecraft] K3 Invoice Confirmation To: elecraft@mailman.qth.net Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=iso-8859-1 I received an email from Lisa Jones yesterday, Saturday, 1/26/08 stating my K3 will be shipping soon. My NO DEPOSIT order was placed May 8, 2007. It looks like Lisa and others at Elecraft are working overtime on the weekends to get these orders out. Thank you very much, Lisa. Roy Morris W4WFB ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com :jumping::-):-):-) -- View this message in context: http://www.nabble.com/K3-Invoice-Confirmation-tp15121273p15133915.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Shipping Status 21/01/08
Also of note on the shipping update page is this reference regarding prior prepaid orders... In any case, this crossover point will occur by the end of this week's shipments, 1/25. After 1/25 we will ship all remaining orders in the order they were received. Production is continuous from this point on. Stewart Baker wrote: ** At Last ** A Shipping Status that makes sense.. THANK YOU 73 Stewart G3RXQ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://www.nabble.com/Shipping-Status-21-01-08-tp15014748p15017505.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 sub receiver
joshLO wrote: When is the KRX3 sub receiver for the K3 going to be available??? Josh n7xm Not sure Josh but the backorder status was just changed today from 01/31/08 to just DELAYEDopen time frame now...no explanation given as to why. Larry K1UO -- View this message in context: http://www.nabble.com/K3---sub-receiver-tp14881332p14888278.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 operating tip: RTTY operation without a computer
(If you're of a certain age, remember the mnemonic LSMFT - Low Space Makes Fine Teletype.) I thought LSMFT meant Lucky Strike Means Fine Tobacco? ;^) Sorry...carry on! -- View this message in context: http://www.nabble.com/K3-operating-tip%3A--RTTY-operation-without-a-computer-tp14530270p14540281.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Which Heil Prosets should we carry?
My vote would be for the Proset with H4 element for Contesting/DXing use. Second would be the Proset Plus what contains both the HC4/HC5 elements but is a bit heavier and more tiring to wear for long periods. (consider the Heil footswitch also!) Most of all thanks for asking. 73, Larry K1UO -- View this message in context: http://www.nabble.com/Which-Heil-Prosets-should-we-carry--tp14521217p14525106.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] CB band TX? - I'm shocked!
Richard Kent wrote: Maybe there was another answer all along we did not know it. Maybe the popularity of the CB band has dwindled to the point that it is not the hot spot we remember. or maybe the FCC will give us back the 11 meter band that used to be a Ham band! yeahright ! Merry Christmas -- View this message in context: http://www.nabble.com/CB-band-TX-I%27m-shocked%21-tp14429494p14438448.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 dust cover
Got the cover...now need the radio!! http://www.nabble.com/file/p14363190/Elecraft%2BK3%2BCover.jpeg -- View this message in context: http://www.nabble.com/K3-dust-cover-tp14363190p14363190.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] OT: Source for fiberglass bulkhead cabinet
Can someone tell me where to get a 12X12 X5 fiberglass bulkhead cabinet for mounting to the outside wall for bringing in coax, cables etc and possibly has a copper or aluminum plate for mounting lightening protection devices just before entering the shack wall? Apparently I'm not using the correct search parameters. Is there such a beast made specifically for Ham radio type applications? Sorry for the bandwidth...you can answer directly if you want and I will relay the info to others who may be interested. Thanks -- View this message in context: http://www.nabble.com/OT%3A-Source-for-fiberglass-bulkhead-cabinet-tp14321798p14321798.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] OT: Source for fiberglass bulkhead cabinet
Thanks all who responded...I now have about 4 good sources to check out their product... If anyone else needs a little prod in the right direction as I did, please e-mail me direct. 73, Larry K1UO -- View this message in context: http://www.nabble.com/OT%3A-Source-for-fiberglass-bulkhead-cabinet-tp14321798p14323080.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Which element in Proset sold by Elecraft
I've read the product description for this Headset on the Elecraft site but still don't know which element is in the Heil Proset K2is it the HC4 or HC5? -- View this message in context: http://www.nabble.com/Which-element-in-Proset-sold-by-Elecraft-tp14224186p14224186.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
