Wireless setups
Hi There, I have recently installed 4.8R on my IBM Thinkpad notebook which fortunately includes a wireless NIC. The nic is recognised as wi0 for which I am grateful as Linux did not recognise the card first time around. Now I often move between networks and having to set the wepkey and ssid etc etc by hand will become very tiresome very quickly. I was wondering if any one can point me in the direction of a better way to set these. I am guessing that this will still have to be done after the boot but what do people use ? I was able to get the interface up and ping other hosts so no problems there but can this NIC be set for dhcp rather than having to go through the grief of setting everything manually ? Any pointers or links to howto are much appreciated. Thanks in Advance LukeK ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Odd network interface (PCMCIA) problem; going insane
Hello The problem: My PCMCIA network interface (Linksys PCM100) doesn't seems to work - SORT OF. This is odd. I can get online okay, use Mozilla to browse the web, but when I fire up sshd or apache or any other kind of server they don't seem to be accessible from the machines sitting right next to it on the desk. The BSD machine is @ 10.0.0.3, have a mac @ .2, XP @ .4. Subnets are fine. I can't ssh, telnet, ftp or even ping!! .3 from .2 or .4. When I ping FROM .3 to any another, I get some strange dup responses. This only happens on this machine. I CAN ping to .3 from .3. This makes sense. Have tried direct x-over cable connection between machines. No good. Have removed card and installed in XP machine. Good. Have reinstalled FBSD. No luck. In order to confirm that the machine is okay, I reloaded win2K clean over the BSD. Good! The PCM100 is listed in the pccard.conf file (I think that's it's name.) I do not see any reference to it in dmesg. I swear this worked at one point. Any suggestions? Thanks, Heath Volmer ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: anyone suggest a good PIM for gnome 2.x?
On Sat, 2003-10-18 at 22:25, Micheas Herman wrote: > On Fri, 2003-10-17 at 10:55, Anthony Carmody wrote: > > Hi, > > > > can anyone suggest a good PIM [personal information manager] to use with > > Gnome..? perferably something that has scope for conectivity to > > bluetooth devices. > > Evolution is the most advanced. KDE has a Mail client/PIM that > is supposed to be about as good. (I expect that this will be > very nice) I have to agree. I use Evo, and it's pretty full-featured. Other than Evo, there isn't a GNOME 2 PIM that I'm aware of. The is gnomepim, but it is still GNOME-1.4.x based. > > Blue tooth is a kernel function. I don't know what the status > of Blue tooth is under FreeBSD, but you need 2.6.x under Linux, > so I would assume that you need FreeBSD 5.x to use Blue tooth. Correct. You need -CURRENT to get good Bluetooth support. 5.1-RELEASE has it, but it recently got an overhaul in -CURRENT. Evo does support Palm Pilot sync as well via quite a few media. Joe > > > Micheas > > > > > ___ > > [EMAIL PROTECTED] mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- PGP Key : http://www.marcuscom.com/pgp.asc signature.asc Description: This is a digitally signed message part
Re: IPSEC/NAT
The short answer to your question is yes. I don't use NATD I use IPNAT but I am sure the theories are the same. I found that the challenge was to get the port forwarding right. It also makes using dynamic addresses internally a challenge but I cheated and used statics instead. Then again after reading your mail again I am not sure that I completely understand what type of tunnel you are wanting to use. If it is a cisco vpn client you are using then nothing really special needs to be done except to ensure that the return traffic gets redirected properly. If it is the M$ PPTP implementation that is a bit more tricky as you need to ensure that you get inbound traffic on 1723 redirected to your internal machine. If your company uses a neat IPSec implementation then it should be possible with the co-operation of your companies firewall admin to set up the gateway to have an IPSec tunnel to the office and all packets destined for company's network ie 10.0.10.0 routed along the gif interface ( read man gif ) and all other traffic via the normal net. HTH LukeK On Sun, 19 Oct 2003 00:10:11 + [EMAIL PROTECTED] granted us these pearls of wisdom: > Is it possible for FBSD's nat daemon to route IPSEC traffic properly? What I am > trying to do is use my FBSD gateway that already NAT's my dsl connection to allow me > to use a IPSEC VPN client to connect to my company's network. I have been through > the howto's, and forums, but I am not certain that it can do what I need it to do. > > > Thanks, > Casey > > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: anyone suggest a good PIM for gnome 2.x?
On Fri, 2003-10-17 at 10:55, Anthony Carmody wrote: > Hi, > > can anyone suggest a good PIM [personal information manager] to use with > Gnome..? perferably something that has scope for conectivity to > bluetooth devices. Evolution is the most advanced. KDE has a Mail client/PIM that is supposed to be about as good. (I expect that this will be very nice) Blue tooth is a kernel function. I don't know what the status of Blue tooth is under FreeBSD, but you need 2.6.x under Linux, so I would assume that you need FreeBSD 5.x to use Blue tooth. Micheas > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Micheas Herman email: [EMAIL PROTECTED] Free Print Shop web: http://www.FreePrintShop.org phone: (415)648-3222fax: (415)648-3222 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: gcc compiler issues with gcc version 3.3.1...,,, on freebsd 5-current
On Sat, Oct 18, 2003 at 07:46:33PM -0600, KroNiC~BSD wrote: > > I am not using the firebird port because its behind No it's not..cvsup your ports collection. > and i wanted to try the new firebird-7. 0.7. Kris pgp0.pgp Description: PGP signature
Re: gcc compiler issues with gcc version 3.3.1...,,, on freebsd 5-current
I am not using the firebird port because its behind and i wanted to try the new firebird-7. I have compiled firebird before on linux, openbsd and freebsd 4.x without issues using the same config. This is the first time i have seen this so i assume its the new gcc compiler. again thanks for the help. have a great night. On Sat, 18 Oct 2003 14:03:08 -0700, "Kris Kennaway" <[EMAIL PROTECTED]> said: > On Sat, Oct 18, 2003 at 12:29:05PM -0600, KroNiC~BSD wrote: > > I am trying to compile firebird on freebsd 5-current. Something appears > > to be wrong with the compiler on the 5.x series as i am getting the > > following errors: > > If you're using the firebird port and system compiler then it builds > correctly on a clean FreeBSD system. If you're seeing errors using > the port and system compiler, check that you have followed all the > directions in UPDATING. > > Also check that you're not using weirdo CFLAGS/CXXFLAGS settings (it's > not clear from the output you included, but it looks like you might > be). If you tell g++ to be pickier about the code it accepts, and > then it gives errors from non-conforming code, you've only got > yourself to blame :-) > > If you're not using the port or not using the system compiler, and you > are using default compiler flags, you're probably seeing the error > because newer versions of gcc are much stricter in the code they will > accept as valid. Talk to the firebird developers about fixing the > bugs in their code. > > Kris -- KroNiC~BSD [EMAIL PROTECTED] -- http://www.fastmail.fm - Does exactly what it says on the tin ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: vinum volumes crash on reboot
On Saturday, October 18, 2003, at 04:29 PM, Danny Pansters wrote:
On Saturday 18 October 2003 07:48, aarong wrote:
I have a FreeBSD 4.8-RELEASE system with two identical 80GB IDE
drives. Vinum knows /dev/ad0 as "alpha" and "beta" is /dev/ad3. The
boxes root slice is a Vinum volume and everything on alpha runs
flawlessly. However for the past week I've tried to mirror alpha onto
beta without success. Whether adding plexes, or just creating a
simple 512MB volume on drive beta, Vinum will state beta as
You don't create a volume on a drive. You use drives/partitions to make
up subdisks which make up plexes (representing a pile of data) and with
one or more plexes you make up volumes. And then you can mount a volume
as a vinum partition.
Right.
"referenced" and, in the case below, plexes as faulty after
"referenced" sounds like "was already used". Any disklabel output
perhaps and fstab?
Referenced means the drive is referred too in Vinum's configuration but
not in use; the state is neither down nor up, nor faulty, it's just
sort of there. I'm trying to figure out why its only referenced and not
used.
rebooting. What I'm having difficulty figuring out is why Vinum has a
problem, as none of the logs say why.
# cat /var/log/vinum_history
...
19 Oct 2003 09:53:17.040730 *** vinum started ***
19 Oct 2003 09:53:17.667679 list
19 Oct 2003 09:53:21.147581 dumpconfig
19 Oct 2003 09:53:32.324243 saveconfig
19 Oct 2003 09:53:35.926307 create /vinum.mirror
What's that? you mount a mirror onto /, /var, and so on. Your old
("single plex") vinum volumes have to be unmounted to mount the newly
made mirror. I have the feeling you don't quite get the terminology.
You may need to go into SU mode at the console.
I wasn't aware the volumes had to be umounted to add additional plexes
to them. However this point is moot since I cannot create *any* plex on
the second drive, "beta". Creating a "test" volume with a single plex
and subdisk both on drive "beta" exhibit the exact same behavior:
everything is fine until the system is rebooted and the volume crashes.
Why?
drive beta device /dev/ad3s1h
plex name swap.p1 org concat volume swap
sd len 2096871s driveoffset 265s drive beta
plex name root.p1 org concat volume root
sd len 256000sdriveoffset 2097136s drive beta
plex name var.p1 org concat volume var
sd len 8388608s driveoffset 2353136s drive beta
plex name usr.p1 org concat volume usr
sd len 145554562s driveoffset 10741744s drive beta
This is identical to what your first disk has?
Completely identical. I can start the addition plexes without a
problem, and they run perfectly. Only on reboot does everything come
crashing down (excuse the pun ;-)
Why are you saving the same config over again? This might be the
problem
having a stale config. Vinum config goes on your disk. You put it up
once (perhaps through the vinum prompt which is designed for it) then
leave it.
Only in this case did I use saveconfig each time. You can see I really
don't understand Vinum's behavior all that well; I was just trying
something hoping it would work. In either case the saved configuration
was fine, according to dumpconfig's output.
# cat /var/log/messages | grep vinum
...
Oct 19 09:49:33 /kernel: Preloaded elf module "vinum.ko" at
0xc05e209c. Oct 19 09:49:33 /kernel: Mounting root from
ufs:/dev/vinum/root Oct 19 09:53:36 /kernel: vinum: drive beta is up
Oct 19 09:53:36 /kernel: vinum: swap.p1 is faulty
Oct 19 09:53:36 /kernel: vinum: root.p1 is faulty
Oct 19 09:53:36 /kernel: vinum: var.p1 is faulty
Oct 19 09:53:36 /kernel: vinum: usr.p1 is faulty
Oct 19 09:59:31 /kernel: vinum: var.p1.s0 is up by force
Oct 19 09:59:31 /kernel: vinum: var.p1 is up
Oct 19 09:59:31 /kernel: vinum: var.p1.s0 is up
Oct 19 10:05:12 /kernel: vinum: swap.p1.s0 is up by force
Oct 19 10:05:12 /kernel: vinum: swap.p1 is up
Oct 19 10:05:12 /kernel: vinum: swap.p1.s0 is up
This is synching with p0, which BTW is probably disk1 and the data
contained in p0 corresponds with what's on disk0.''
No, this is on bootup. All *.p1 plexes were fine and running until the
machine restarted. I'm just trying to figure out why.
HTH
A little bit, thanks.
Regards,
-aarong
Dan
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: 5406 warnings during buildworld & other q's
On Sun, Oct 19, 2003 at 01:50:20AM +0100, David Carter-Hitchin wrote: > Hi Free BSDers, > > Sorry about my question overload here. > > I've just successfully cvsup'd to -STABLE (I think), done a buildworld, > installworld and rebuilt the kernel. Everything seemed to go generally ok > but I had a few observations/questions: > > a) Firstly I had difficulty finding much information about the specific > tag I should use in the "tag=" line in the cvsup file. It is in the handbook, so you must have overlooked it. > b) The first run of buildworld failed as vgrind was not on my system. I > hunted down vgrind under /usr/src/usr.bin, built that and ran buildworld > successfully a second time. You need to have a consistent system in order to build world: you can't bootstrap from a system with some of the mandatory pieces missing. > c) buildworld generated 5406 warnings. Some examples are: Warnings are notes from the compiler to the developers. They're expected and can be ignored unless you want to fix them. > d) installworld failed the first time as the user 'smmsp' didn't > exist. I dutifully followed the advice given in UPGRADE by building > and running mergemaster. Second run of installworld also failed - at > mergemaster, saying "Don't know how to build mergemaster.sh". I'm not > sure if I did the right thing, but copying /usr/sbin/mergemaster to the > source directory /usr/src/usr.sbin/mergemaster and renaming it to > mergemaster.sh, fixed the problem. Can anyone comment on this? It looks like your buildworld didn't complete before you tried to installworld it. > e) 'cvsup -g -L2 ports-supfile' now generates an error: > /usr/libexec/ld-elf.so.1: /usr/lib/libm.so.2: Undefined symbol "__stderrp" > > I checked the timestamp on both ld-elf.so.1 and libm.so.2 and they were > built today - anyone know what might have caused this? Do I need to > rebuild cvsup, if so how? This is explained in UPDATING. > f) At some point (I think after doing a cvsup with "tag=RELENG_4" I lost > all my ports files - the only files I can see under /usr/ports/*/* are > Readme.html's. Is that a bug? Luckily I kept a copy of my ports tree so > I'll use that until I can figure out e) above. No, you told cvsup to delete your ports collection (the ports tree is not branched). This is also explained in the handbook. Kris pgp0.pgp Description: PGP signature
Re: Upgrade to 4.8 RELEASE
On Sat, 18 Oct 2003 20:04:39 -0400, Robert H. Perry <[EMAIL PROTECTED]> wrote: Hello, I'm making plans to upgrade from 4.7 RELEASE to 4.8 RELEASE. My previous attempt was a binary upgrade from 4.5 to 4.7 which did not go very well. I eventually purchased the 4.7 CD. The FreeBSD Handbook stresses backing up the system and implies that /dump/ is a better backup program. Chapter 12.9.8.1 of the handbook recommends having a copy of the boot and fixit floppies available and making sure they have all your devices, otherwise you'll need to prepare two bootable custom floppies that contain /fdisk, disklabel, newfs, mount, /and your backup program. It goes on to say that these programs must be statically linked. I understand hard and soft links but I'm not familiar with static links. The handbook also provides a script for creatinng a bootable floppy. Can someone help me understand static link? Secondly, can I assume that the script must be reviewed for likely modifications? I'm just learning shell programming and if significant modifications are necessary, I may end up purchasing a CD for 4.8. Any suggestions relative to the upgrade process is also appreciated. Unless there is a specific reason not to do so, cvsup and make world would seem to be an easier and altogether better way to go for an upgrade from one minor version number to the next. Many users do this quite routinely (e.g., I do it once every week or two). See http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cutting-edge.html#CUTTING-EDGE-SYNOPSIS>. While this section of the Handbook talks about the "cutting edge" development branches, -CURRENT and -STABLE, the same process can be used to upgrade to a -RELEASE. Jud ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: your mail
On Sat, Oct 18, 2003 at 05:41:41PM -0500, d wrote: > why is it that freebsd 4.7 was the only stable working alpha version > you had and now its gone?? Because we're trying to persecute you. Isn't it obvious? Kris P.S. If you want a serious answer send polite emails. pgp0.pgp Description: PGP signature
5406 warnings during buildworld & other q's
Hi Free BSDers, Sorry about my question overload here. I've just successfully cvsup'd to -STABLE (I think), done a buildworld, installworld and rebuilt the kernel. Everything seemed to go generally ok but I had a few observations/questions: a) Firstly I had difficulty finding much information about the specific tag I should use in the "tag=" line in the cvsup file. I can't remember accurately all the places I looked, but it included the handbook, faq, the /usr/share/examples/cvsup/stable-supfile and Greg Lehey's book (3rd ed.). The one place I didn't look was on the website, but I couldn't do that as after a unsuccessful buildworld (with cvsup "tag=."), my web browser gave up working at all and just coredumped. Can someone clarify where definitive and up to date information regards the tag entries can be found? In the end I plumped for RELENG_4 (as recommended by the stable-supfile), I've ended up with 4.9-RC - is that a stable version? I was a bit concerned to see someone else on this list mentioned RELENG_4_8, which I understood was the STABLE version so it would be cool to have clarification. b) The first run of buildworld failed as vgrind was not on my system. I hunted down vgrind under /usr/src/usr.bin, built that and ran buildworld successfully a second time. c) buildworld generated 5406 warnings. Some examples are: yppasswdd_server.o(.text+0xba9): warning: mktemp() possibly used unsafely; consider using mkstemp() /usr/src/gnu/usr.bin/binutils/as/i386-freebsd/../../../../../contrib/binutils/ include/opcode/i386.h:1094: warning: initialization discards qualifiers from pointer target type I have uploaded the logs to: http://www.carter-hitchin.clara.co.uk/logs/buildworld.log.gz http://www.carter-hitchin.clara.co.uk/logs/installworld.log.gz Are these warnings normal? Should I run buildworld again? I should note here that I was previously running 4.2 d) installworld failed the first time as the user 'smmsp' didn't exist. I dutifully followed the advice given in UPGRADE by building and running mergemaster. Second run of installworld also failed - at mergemaster, saying "Don't know how to build mergemaster.sh". I'm not sure if I did the right thing, but copying /usr/sbin/mergemaster to the source directory /usr/src/usr.sbin/mergemaster and renaming it to mergemaster.sh, fixed the problem. Can anyone comment on this? e) 'cvsup -g -L2 ports-supfile' now generates an error: /usr/libexec/ld-elf.so.1: /usr/lib/libm.so.2: Undefined symbol "__stderrp" I checked the timestamp on both ld-elf.so.1 and libm.so.2 and they were built today - anyone know what might have caused this? Do I need to rebuild cvsup, if so how? f) At some point (I think after doing a cvsup with "tag=RELENG_4" I lost all my ports files - the only files I can see under /usr/ports/*/* are Readme.html's. Is that a bug? Luckily I kept a copy of my ports tree so I'll use that until I can figure out e) above. Many thanks for your help, David ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
IPSEC/NAT
Is it possible for FBSD's nat daemon to route IPSEC traffic properly? What I am trying to do is use my FBSD gateway that already NAT's my dsl connection to allow me to use a IPSEC VPN client to connect to my company's network. I have been through the howto's, and forums, but I am not certain that it can do what I need it to do. Thanks, Casey ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Upgrade to 4.8 RELEASE
Hello, I'm making plans to upgrade from 4.7 RELEASE to 4.8 RELEASE. My previous attempt was a binary upgrade from 4.5 to 4.7 which did not go very well. I eventually purchased the 4.7 CD. The FreeBSD Handbook stresses backing up the system and implies that /dump/ is a better backup program. Chapter 12.9.8.1 of the handbook recommends having a copy of the boot and fixit floppies available and making sure they have all your devices, otherwise you'll need to prepare two bootable custom floppies that contain /fdisk, disklabel, newfs, mount, /and your backup program. It goes on to say that these programs must be statically linked. I understand hard and soft links but I'm not familiar with static links. The handbook also provides a script for creatinng a bootable floppy. Can someone help me understand static link? Secondly, can I assume that the script must be reviewed for likely modifications? I'm just learning shell programming and if significant modifications are necessary, I may end up purchasing a CD for 4.8. Any suggestions relative to the upgrade process is also appreciated. Thanks, Bob ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
? getopt_long(), iopl() and ioperm() ?
Hi there, I'm hacking at a piece of code that I want to turn into a port. It's from Linux and uses libpci and some other 'strange' functions. While I think that I've managed to modify the libpci port to install the required lib, I'm more or less lost at getopt_long() which I assume is in the libgnugetopt port. However, for some reason, even if I include it explicitly (#include "/usr/local/include/getopt.h"), I run into problems. Please note that I'm not a programmer at all, so it's very much hacking along, so I may look for someone patient to bear with me ;-) But I am willing to learn. A similar story applies to the iopl() and the ioperm() functions which are used in a part of the code which I personally don't require but others may (if this ever reaches port status which I hope it does ;-)). For these functions, I don't even know how to replace them. Well, I think there still is some bug in the configure script that goes with it, but basically that's the story for the time being. Hints are very much so appreciated, though I may need some time to think them over and apply them due to my limited programming abilities. Thanks a lot for reading this far, all the best, Peter. PS: Please be so kind and keep me Cc:'ed on this matter, it helps me to note replies earlier and ensures a slightly more timely response, thank you! -- NEU FÜR ALLE - GMX MediaCenter - für Fotos, Musik, Dateien... Fotoalbum, File Sharing, MMS, Multimedia-Gruß, GMX FotoService Jetzt kostenlos anmelden unter http://www.gmx.net +++ GMX - die erste Adresse für Mail, Message, More! +++ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Why build INDEX ?
On 18 Oct 2003 13:35:30 -0400 Lowell Gilbert <[EMAIL PROTECTED]> wrote: > 'pkg_version -v' and 'make search' are very useful, and depend on an > up-to-date INDEX file. 'pkg_version -v' does NOT depend on an up-to-date INDEX. > This is completely incorrect. Building INDEX.db is for portversion. > INDEX has to be updated for pkg_version to see the updated versions of > the ports skeletons (in other words, if you don't rebuild it, > 'pkg_version -v won't know that your ports have been updated). Again, 'pkg_version -v' works just fine without an updated INDEX. I've done it hundreds of times; it always works. -- Adam ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
PPP dialin server (-direct) won't route traffic - sets incorrect gateway on PC
I'm trying allow a dialin connection to my 4.8-STABLE box (although I've tried with my 5.1-CURRENT box with the same results) via userland ppp. The modem can connect just fine and I can login to the machine. I then start ppp. However, no matter how I setup ppp, I cannot get the routing to work. Yes, the server side HAS 'gateway_enable="YES"' in rc.conf (the machine routes for my network already). I started with an old ppp config file that used to work. It doesn't anymore. So, I started following the handbook pages - even verbatim. But, the PC side always ends up with something similar to the following: -- Active Routes: Network Address Netmask Gateway AddressInterface Metric 0.0.0.0 0.0.0.0192.168.201.2192.168.201.2 1 127.0.0.0255.0.0.0127.0.0.1127.0.0.1 1 192.168.201.0255.255.255.0192.168.201.2192.168.201.2 1 192.168.201.2 255.255.255.255127.0.0.1127.0.0.1 1 192.168.201.255 255.255.255.255192.168.201.2192.168.201.2 1 224.0.0.0224.0.0.0192.168.201.2192.168.201.2 1 255.255.255.255 255.255.255.255192.168.201.2192.168.201.2 1 -- Notice that there is no 'next hop' (that is always the case, not matter what ppp.conf looks like). The gateway address is *always* the PC address, not the server. How can the packets go anywhere with settings like that? It feels like there's a bug in ppp where it sends the wrong address to the PC for what its gateway will be. Am I missing something? I've done this before - it was working fine up until early-ish last year - and it was a piece of cake. Now though, I can't get it to work to save my life. Can anyone help? It would be appreciated. Thanks Andy ps A long time ago I sent email to Brian about this but I never got a response. pps For completeness... -- ppp.conf dialin: set log All allow users dialin set timeout 0 enable dns accept dns deny pap disable pap deny chap disable chap disable lqr deny lqr set ifaddr 192.168.200.1 192.168.201.1 255.255.255.255 -- ppp.linkup dialin: add 192.168.201.0 netmask 255.255.255.0 HISADDR __ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
[no subject]
why is it that freebsd 4.7 was the only stable working alpha version you had and now its gone?? 4.8, 5.0, 5.1 none of em work... only 4.7 did as a mini-install. the alphas a nice a pc but i think im going to have to throw these away if free software is all thats out there. this whole freebsd thing has been a nightmare. after all the problems ive had trying to install it on the alpha, im glad bill gates still makes intel software! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: install problems
probing for pnp devices on ppbus0 ppbus0: scp,vlink plip0: on ppbus0 ad0: dma limited to udma33,non-ata66 cable or device ad0: read command timeout tag=0 serv=0 -resetting ata0: resetting devices.. this is where it locks up! - Original Message - From: Lowell Gilbert To: chuck miller Cc: [EMAIL PROTECTED] Sent: Saturday, October 18, 2003 12:24 PM Subject: Re: install problems "chuck miller" <[EMAIL PROTECTED]> writes: > Hi, I'm having problems trying to install freebsd 4.8 on my sony > vaio pcv-rx850.Everything is factory except I added a > 2gig hard drive..The problem I have is my computer locks up trying > to install and never gets to the menu. However if the hard drives > are disconnected I can get to the menu but can get no further. Can > you help or at least guide me in the right direction What is the last message before it locks up? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: gcc compiler issues with gcc version 3.3.1...,,, on freebsd 5-current
On Sat, Oct 18, 2003 at 12:29:05PM -0600, KroNiC~BSD wrote: > I am trying to compile firebird on freebsd 5-current. Something appears > to be wrong with the compiler on the 5.x series as i am getting the > following errors: If you're using the firebird port and system compiler then it builds correctly on a clean FreeBSD system. If you're seeing errors using the port and system compiler, check that you have followed all the directions in UPDATING. Also check that you're not using weirdo CFLAGS/CXXFLAGS settings (it's not clear from the output you included, but it looks like you might be). If you tell g++ to be pickier about the code it accepts, and then it gives errors from non-conforming code, you've only got yourself to blame :-) If you're not using the port or not using the system compiler, and you are using default compiler flags, you're probably seeing the error because newer versions of gcc are much stricter in the code they will accept as valid. Talk to the firebird developers about fixing the bugs in their code. Kris pgp0.pgp Description: PGP signature
IPFW Antics
Hey-
I am trying to run an IRC file server inside my network that is protected by
a FreeBSD box that is running natd. I am running natd with the following
options to enable IP forwarding to allow people to request files from my
file server (192.168.0.101):
/sbin/natd -f /etc/natd.conf -redirect_port tcp 192.168.0.101:-7000
-7000 -n ep1
Unfortunately, it appears that the natd box is not forwarding the incoming
request packets correctly. Can anyone provide some insight on this? Thanks
in advance.
-ts
~
:::!~!:.
.xUHWH!! !!?M88WHX:.
[EMAIL PROTECTED] !X!M$$WWx:.
:!!?H! :!$!$$8X:
!!~ ~:~!! :~!$!#$$8X:
:!~::!H!< ~.U$X!?RMM!
~!~~~ .:XW$$$U!!?$$$MM!
!:~~~ .:!M"T#WX??#MRRMMM!
~?WuxiW*` `"#8??!!!
M `"T#$T~!8$WUXU~
~#$$$m: ~!~ ?$$
~T8xx. .xWW- ~""##*" .-.
!~?T#$$@@[EMAIL PROTECTED] /` /I stop at all BBQ pits,\
!! .:XUW$W!~ `"~: : / firework stands, and \
!H: !WMTi.: .!WUn+!` \ Norma Jean shows... /
?H.!u "$$$B$$$!W:U!T$$M~ \_ /
[EMAIL PROTECTED]("*$$$W$TH$! `|/
?$$$B$Wu("**$RM!
~$B$$en:``
~"##*M~
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Porting to FreeBSD
On Fri, Oct 17, 2003 at 08:11:23PM +, Daniela wrote: > On Thursday 16 October 2003 21:32, Karel J. Bosschaart wrote: > > On Thu, Oct 16, 2003 at 04:44:17PM -0400, Charles Swiger wrote: > > > On Thursday, October 16, 2003, at 06:11 PM, Daniela wrote: > > > > > > > > > >I can't even compile most of the programs on my system, and I'm almost > > > >sure it > > > >has to do with dependencies in 99% of all cases. How do I find out > > > >what ports/programs it depends on? And yes, I have RTFM, but I still > > > >have no clue. > > > > > > Most programs have a README which identifies any dependencies they > > > might have. If a Linux package exists for the program (ie, such as an > > > RPM), you could also look at that to gain an idea as to the > > > dependencies. Beyond that, however, the problem lies in the fact that > > > many people don't write particularly portable code, and you will need > > > to resolve such issues by patching the program to work under FreeBSD. > > > > Adding to this: try 'gmake' instead of 'make'. Most programs written > > for Linux assume the GNU version of make which is different from BSD > > make. gmake is in the ports collection, and if you installed some ports > > it is quite likely you already have it as a (build) dependency. > > > I have the most problems with the configure scripts. They keep telling me that > something is missing, but either I don't know where to look for it, or I have > it already installed and don't know why the script doesn't find it. > If something is missing, you sould look at the ports tree (/usr/ports) and install it, maybe you could need to modifiy the paths for the configure script of the dependencies (check ./configure --help of the soure that you want to install). > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
gcc compiler issues with gcc version 3.3.1...,,, on freebsd 5-current
I am trying to compile firebird on freebsd 5-current. Something appears to be wrong with the compiler on the 5.x series as i am getting the following errors: c++ -o TestCOMPtr.o -c -DOSTYPE=\"FreeBSD5\" -DOSARCH=\"FreeBSD\" -I./../ds -I./services -I../../dist/include/string -I../../dist/include/xpcom -I../../dist/include -I/sandbox/firebird/mozilla/dist/include/nspr -I/usr/X11R6/include -fPIC -I/usr/X11R6/include -I/usr/X11R6/include -fno-rtti -fno-exceptions -Wall -Wconversion -Wpointer-arith -Wcast-align -Woverloaded-virtual -Wsynth -Wno-ctor-dtor-privacy -Wno-long-long -pedantic -fshort-wchar -pipe -DDEBUG -D_DEBUG -DDEBUG_root -DTRACING -g -I/usr/X11R6/include -I/usr/X11R6/include -DMOZILLA_CLIENT -include ../../mozilla-config.h -Wp,-MD,.deps/TestCOMPtr.pp TestCOMPtr.cpp In file included from /usr/include/c++/3.3/backward/iostream.h:31, from TestCOMPtr.cpp:39: /usr/include/c++/3.3/backward/backward_warning.h:32:2: warning: #warning is a GCC extension /usr/include/c++/3.3/backward/backward_warning.h:32:2: warning: #warning This file includes at least one deprecated or antiquated header. Please consider using one of the 32 headers found in section 17.4.1.2 of the C++ standard. Examples include substituting the header for the header for C++ includes, or instead of the deprecated header . To disable this warning use -Wno-deprecated. In file included from /usr/include/c++/3.3/bits/stl_iterator_base_funcs.h:68, from /usr/include/c++/3.3/bits/stl_algobase.h:74, from /usr/include/c++/3.3/memory:54, from /usr/include/c++/3.3/string:48, from /usr/include/c++/3.3/bits/locale_classes.h:47, from /usr/include/c++/3.3/bits/ios_base.h:47, from /usr/include/c++/3.3/ios:49, from /usr/include/c++/3.3/ostream:45, from /usr/include/c++/3.3/iostream:45, from /usr/include/c++/3.3/backward/iostream.h:32, from TestCOMPtr.cpp:39: /usr/include/c++/3.3/bits/concept_check.h:52:37: warning: anonymous variadic macros were introduced in C99 In file included from /usr/include/c++/3.3/memory:55, from /usr/include/c++/3.3/string:48, from /usr/include/c++/3.3/bits/locale_classes.h:47, from /usr/include/c++/3.3/bits/ios_base.h:47, from /usr/include/c++/3.3/ios:49, from /usr/include/c++/3.3/ostream:45, from /usr/include/c++/3.3/iostream:45, from /usr/include/c++/3.3/backward/iostream.h:32, from TestCOMPtr.cpp:39: /usr/include/c++/3.3/bits/stl_alloc.h:968: error: ISO C++ forbids the use of ` extern' on explicit instantiations /usr/include/c++/3.3/bits/stl_alloc.h:969: error: ISO C++ forbids the use of ` extern' on explicit instantiations /usr/include/c++/3.3/bits/stl_alloc.h:970: error: ISO C++ forbids the use of ` extern' on explicit instantiations /usr/include/c++/3.3/bits/stl_alloc.h:970: error: ISO C++ forbids the use of ` extern' on explicit instantiations /usr/include/c++/3.3/bits/stl_alloc.h:970: error: ISO C++ forbids the use of ` extern' on explicit instantiations In file included from /usr/include/c++/3.3/string:57, from /usr/include/c++/3.3/bits/locale_classes.h:47, from /usr/include/c++/3.3/bits/ios_base.h:47, from /usr/include/c++/3.3/ios:49, from /usr/include/c++/3.3/ostream:45, from /usr/include/c++/3.3/iostream:45, from /usr/include/c++/3.3/backward/iostream.h:32, from TestCOMPtr.cpp:39: /usr/include/c++/3.3/bits/basic_string.tcc:1061: error: ISO C++ forbids the use of `extern' on explicit instantiations /usr/include/c++/3.3/bits/basic_string.tcc:1061: error: ISO C++ forbids the use of `extern' on explicit instantiations /usr/include/c++/3.3/bits/basic_string.tcc:1061: error: ISO C++ forbids the use of `extern' on explicit instantiations /usr/include/c++/3.3/bits/basic_string.tcc:1064: error: ISO C++ forbids the use of `extern' on explicit instantiations /usr/include/c++/3.3/bits/basic_string.tcc:1067: error: ISO C++ forbids the use of `extern' on explicit instantiations /usr/include/c++/3.3/bits/basic_string.tcc:1070: error: ISO C++ forbids the use of `extern' on explicit instantiations /usr/include/c++/3.3/bits/basic_string.tcc:1073: error: ISO C++ forbids the use of `extern' on explicit instantiations /usr/include/c++/3.3/bits/basic_string.tcc:1076: error: ISO C++ forbids the use of `extern' on explicit instantiations /usr/include/c++/3.3/bits/basic_string.tcc:1076: error: ISO C++ forbids the use of `extern' on explicit instantiations /usr/include/c++/3.3/bits/basic_string.tcc:1076: error: ISO C++ forbids the use of `extern' on explicit instantiations /usr/include/c++/3.3/bits/basic_string.tcc:1079: error: ISO C++ forb
Re: host problem with ports CVSUP
Alex <[EMAIL PROTECTED]> writes: > I'm trying to use CVSUP to update my ports collection. > When I run the command "cvsup ports-supfile" I get an > error that reads: > > Cannot get IP address of my own host -- is its > hostname correct? Nothing to do with the supfile. cvsup is looking to resolve its *own* IP address. Add it to the /etc/hosts file. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD's people
On 2003-10-18 11:43, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > Dear FreeBSD Team, > Can I recive place on people.freebsd.org to build my page about *bsd > problems? > > Patrick Halczak Hi Patrick, The space on people.FreeBSD.org is reserved AFAIK for FreeBSD developers. Bearing that in mind, note that it's not that hard to become a FreeBSD developer. There's always a need for people who are eager to help with the website of FreeBSD, the documentation, and existing problems/bugs. You can find more information about ways you can contribute to FreeBSD by reading the article "Contributing to FreeBSD", part of our documentation set. Just point your browser to: http://www.freebsd.org/doc/en_US.ISO8859-1/articles/contributing/ Thank you for your interest in FreeBSD :-) - Giorgos ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Pentium 120 reboots after loading mfsroot floppy.
Almost every time I see a reboot problem as you describe it is hardware. Not always but 99 out of 100. Reseat all the mem and the cards. Usually it is bad mem for me, but power supplies, mother boards have also been the culprit. Having said all that It does seem to be a bit lean on the mem size. I wouldn't run it will less than 32mb. --Wes On Oct 18, 2003, at 10:16 AM, Lowell Gilbert wrote: "Frederick Bowes" <[EMAIL PROTECTED]> writes: I was hoping to try out FreeBSD on an old machine I have been given (Pentium 120, 514MB HD, 8mb ram) and it reboots after loading the mfsroot floppy disk. You insert the disk, it goes /|\|/ for a while then reboots. What might cause this problem? Depends on the FreeBSD version you're trying. You might just be short on memory, though; a system should still be able to run in less memory that, but it may need more to install. I'd expect it to get further than that point, though. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: ports updates
jxz wrote: Hello! I'm considering upgrading from Linux to FreeBSD in my home machine. I have some doubts concerning the ports collection: Nice participle (gerund?) in that first sentence :-) I would use the 4.8-RELEASE branch. The ports are stalled (just security upgrades) or they continue to be updated with new versions of the softwares? What are the updates policies of the ports collections on the other branches, where do I found more about it? TIA. The ports tree is the ports tree there's no branch. It's tagged -CURRENT in the CVS system, so if you're running -STABLE, for example, you'd have to have seperate supfiles for source and ports (but it's no problem, ready to configure examples are all in /usr/share/examples/cvsup/). My advice would be to install what you want from ports, cvsup the new tree periodically (say monthly or so) and use 'portupgrade' (from the ports tree) to keep the ports up to date. Dru Lavigne has a great article on portupgrade at onlamp.com: http://www.onlamp.com/pub/a/bsd/2003/08/28/FreeBSD_Basics.html I'd also advise that if you do go this route, start portupgrade within a couple of months after you move to FBSD. I waited over a year for one server, and it took a while to get that one straightened out when I finally got around to 'portupgrade' on it. :-( Kevin Kinsey DaleCo, S.P. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
host problem with ports CVSUP
I'm trying to use CVSUP to update my ports collection. When I run the command "cvsup ports-supfile" I get an error that reads: Cannot get IP address of my own host -- is its hostname correct? Pasted below are the applicable lines from the ports-supfile, can anyone see what I"m doing wrong? *default host=cvsup9.us.FreeBSD.org *default base=/usr *default prefix=/usr *default release=cvs delete use-rel-suffix compress Thanks, Alex __ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: ports updates
On Sat, Oct 18, 2003 at 02:46:02PM -0200, jxz wrote: > I'm considering upgrading from Linux to FreeBSD in my home machine. I > have some doubts concerning the ports collection: > > I would use the 4.8-RELEASE branch. The ports are stalled (just > security upgrades) or they continue to be updated with new versions of > the softwares? > > What are the updates policies of the ports collections on the other > branches, where do I found more about it? ports do not have any special relation to any particular branch of the OS. There's just ports, which gets continually updated with maybe the occasional hiatus right before new releases when a set of packages is produced to go onto the release CDs Don't confuse ports; which is a framework of makefiles and other supporting material that makes it trivially easy to download source, compile and install any software; with packages; which are the compiled output of ports gathered together in a handy-to-install tar-ball. As complete a set of packages as possible is produced to go with each OS release, and if there's time available on the package building cluster, updated packages will be produced when possible. Given the parallel release tracks of 4.x and 5.x at the moment, there hasn't been much time to produce as many package updates as usual. The typical way of using ports is described very well in a series of onlamp articles by Dru Lavigne: http://www.oreillynet.com/pub/a/bsd/2003/08/07/FreeBSD_Basics.html http://www.oreillynet.com/pub/a/bsd/2003/08/28/FreeBSD_Basics.html http://www.oreillynet.com/pub/a/bsd/2003/09/18/FreeBSD_Basics.html but the canonical instructions are at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html#CVSUP http://www.freebsd.org/ports/index.html Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK pgp0.pgp Description: PGP signature
Re: Why build INDEX ?
Adam McLaurin <[EMAIL PROTECTED]> writes: > Kris, maybe you can answer this definitively, once and for all. What are the > precise reasons why INDEX is needed? Also, what is the practical difference > between using 'make index' and 'portsdb -uU'? 'make index' and 'portsdb -U' update INDEX. 'portsdb -u' updates INDEX.db. INDEX is used by the base system ports utilities to handle searches, some pkg_info options, and so on. > I've been told by a few people that INDEX is unnecessary unless you're building > a package, which most end users will never do. However, I am suspicious that > there are other reasons for INDEX, but I've never heard definitively what they > are. 'pkg_version -v' and 'make search' are very useful, and depend on an up-to-date INDEX file. > I do know that building INDEX after cvsup allows using portversion instead of > pkg_version, for a bit of a performance improvement. However, pkg_version isn't > THAT slow, so I certainly don't think building INDEX (~30-40 minutes on my box) > is worth it just for that. This is completely incorrect. Building INDEX.db is for portversion. INDEX has to be updated for pkg_version to see the updated versions of the ports skeletons (in other words, if you don't rebuild it, 'pkg_version -v won't know that your ports have been updated). > Kris, want to clear my conscience here? Is it REALLY needed for the typical end > user? It's not essential, but some utilities will work with outdated information. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: install problems
"chuck miller" <[EMAIL PROTECTED]> writes: > Hi, I'm having problems trying to install freebsd 4.8 on my sony > vaio pcv-rx850.Everything is factory except I added a > 2gig hard drive..The problem I have is my computer locks up trying > to install and never gets to the menu. However if the hard drives > are disconnected I can get to the menu but can get no further. Can > you help or at least guide me in the right direction What is the last message before it locks up? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: ports updates
On Sat, 18 Oct 2003 14:46:02 -0200 jxz <[EMAIL PROTECTED]> wrote: > The ports are stalled (just> security upgrades) or they continue to be > updated with new versions of the softwares? Ports always give you the latest software for your FreeBSD box. You need to cvsup them regularly, but that's all. After that you run the everything you'll ever want to run from ports ;) -- dick -- http://www.nagual.st/ -- PGP/GnuPG key: F86289CE ++ Running FreeBSD 4.8 ++ Debian GNU/Linux (Woody) + Nai tiruvantel ar vayuvantel i Valar tielyanna nu vilya ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: cvsup problem on router
Vulpes Velox <[EMAIL PROTECTED]> writes: > Yes, I know about the -A switch... here is what happens... yeah, I am probally > missing something annoyingly obvious, but I can't figure it out what so ever... > > any ways, much thanks in advance =) > > > here is the command I try... > > cdm-207-33-7-sunv# cvsup -A ports > Cannot get IP address of my own host -- is its hostname correct? > cdm-207-33-7-sunv# The -A switch doesn't help you here. It still can't resolve the address to its own name. Add IP the address to DNS -- or at least to /etc/hosts. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Pentium 120 reboots after loading mfsroot floppy.
"Frederick Bowes" <[EMAIL PROTECTED]> writes: > I was hoping to try out FreeBSD on an old machine I have been given > (Pentium 120, 514MB HD, 8mb ram) and it reboots after loading the mfsroot > floppy disk. You insert the disk, it goes /|\|/ for a while then reboots. > > What might cause this problem? Depends on the FreeBSD version you're trying. You might just be short on memory, though; a system should still be able to run in less memory that, but it may need more to install. I'd expect it to get further than that point, though. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Query.
Dan <[EMAIL PROTECTED]> writes: > Basically, the problem i'm having - is that when I boot my Laptop - with the > Netgear HA501 wireless card, all traffic on my FreeBSD box - which acts as > the Gateway "stops". If I'm on IRC I ping timeout, browsing the net becomes > impossible, etc. Check process and interface statistics to see if something is getting tied up. And make sure the interface configurations aren't getting changed. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: NAT Woes...
"Justin P. Michel" <[EMAIL PROTECTED]> writes: > I am having a problem with NAT. > > I have my FreeBSD system, running 4.8, cvsup'd to p13. I have the following > in my kernel configuration: > > options IPDIVERT > options IPFIREWALL > options IPFIREWALL_VERBOSE > options IPFIREWALL_VERBOSE_LIMIT=10 > > I have two network adapters, both Realtek 8139s. The first is set to > 192.168.0.2, the second is set to 10.0.0.1. > > The 192.168.0.2 one plugs into my router, and the 10.0.0.1 one plugs into my > local hub (just like in the picture in the handbook). > > The system can ping and talk fine with the outside world. However, when I > plug a system into the hub, the FreeBSD systems assigns it an IP (I'm > running dhcpd on the FreeBSD system as well), and I can ping the FreeBSD > system on the 10.0.0.1 interface, but I can not ping the other interface, or > access the outside world. > > I have the following in my rc.conf as well: > > gateway_enable="YES" > firewall_enable="YES" > firewall_type="OPEN" > natd_enable="YES" > natd_interface="rl0" > natd_flags="" > ifconfig_rl0="inet 192.168.0.2 netmask 255.255.255.0" > ifconfig_rl1="inet 10.0.0.1 netmask 255.255.255.0" > defaultrouter="192.168.0.1" > > Am I missing something? I followed the instructions in the handbook, (and > have set up similar networks that worked fine) but can not seem to get this > one to go. If anyone can shed some light on this situation, please let me > know. Are the client systems sending out packets at all? You can use tcpdump(1) on the FreeBSD router to check. If not, maybe they're not getting configured with a default route or DNS server. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ports updates
Hello! I'm considering upgrading from Linux to FreeBSD in my home machine. I have some doubts concerning the ports collection: I would use the 4.8-RELEASE branch. The ports are stalled (just security upgrades) or they continue to be updated with new versions of the softwares? What are the updates policies of the ports collections on the other branches, where do I found more about it? TIA. -- [EMAIL PROTECTED] pgp0.pgp Description: PGP signature
Re: monitoring serial consoles (was Re: erorrs from spec_getpages)
On Sat, 18 Oct 2003, Dan Langille wrote: DL> Moving this thread over to -questions, please don't include DL> [EMAIL PROTECTED] in the reply agrred [but the please don't drop me from CC list, as I do not read -question ;)] DL> > That's why I always try to set up logged serial console for any machine with DL> > more than marginal importance. BTW, comms/conserver-com port is of great use DL> > for this purpose! DL> DL> I have an 8 port serial Boca card here, which I have yet to get DL> running. How does comms/conserver-com work? I couldn't determine DL> that from the FAQ. Does it need any hardware? How does it monitor DL> the serial console? Do you connect two boxes together via their DL> serial ports? Box A reports on Box B, and vice versa? DL> DL> Or does it just monitor the serial console and report back to a DL> central server? For two machines each capable of 2 serial ports (usually, but it's not that obvious with modern mobos and/or server/19"/compact platforms), I'd connect each sio0/com1 to other's sio1/com2 with null-modem cable, enable serial console and getty at ttyd0. For servers cluster, one of machines should be elected as comserver and equipped with pultiport card, other's sio0's connected to its multiport, and its own sio0 -- to sio1 somewhere. each machine with remote console target then runs comserver. In the simplest case of thw machines each conserver.cf would be like -- 8< -- # name:path:baud:logfile:mark:break LOGDIR=/var/log com1:/dev/cuaa0:9600p:&:30ma # %% # Access part # trusted: localhost host.domain.tld #allow: localhost woozle.rinet.ru host.domain.tld refuse: 0.0.0.0/0 -- 8< -- conservers could also be cascaded, but that's another beast story ;-) DL> > I assumed here that usually you have more than one machine per physical DL> > location; otherwise, I'd set up remote logging, preferrably to two different DL> > machines via two different interfaces, but such ideal network design is DL> > *rarely* reqchable ;-) DL> DL> I have one location which has only one box. That box and the DL> bandwidth is kindly donated by BCHosting.com, and hosts DL> freebsddiary.org, freshports.org, etc. It does about 45GB a month DL> (at last check). I'd like to have a serial console there. But if it DL> could the console remotely, that would be good. well, there are devices which do real _remote_ console job; I suppose you can politely ask BCHosting if they can setup such remote console for you; it can greatly simplify remote upgrades, for example. However, not any (read: rare) non-rackmount mobo is able to redirect, say, BIOS output to com port, so that you can't remotely tweak ACPI and/or memory timings... Good colocation support is almost always great; if you have good hardware support _in_addition_ to that, you can sleep much better ;-P Sincerely, D.Marck [DM5020, MCK-RIPE, DM3-RIPN] *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- [EMAIL PROTECTED] *** ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
monitoring serial consoles (was Re: erorrs from spec_getpages)
Moving this thread over to -questions, please don't include [EMAIL PROTECTED] in the reply On 18 Oct 2003 at 19:39, Dmitry Morozovsky wrote: > On Sat, 18 Oct 2003, Dan Langille wrote: > > [snip] > > DL> > Well I was in impression you've swapped out the disk, not cable, hence my > DL> > assumption. Sure it may be wrong cable; however, I suppose at least some ATA > DL> > errors should be logged somewhere before spec_getpages... > DL> > DL> They may have been, but they were not in /var/log/messages. If they > DL> were on the console, they were scrolled off the top. I couldn't > DL> scroll up because the keyboard hadn't been attached at boot, and I > DL> had not modified the kernel to allow for that situation. > > That's why I always try to set up logged serial console for any machine with > more than marginal importance. BTW, comms/conserver-com port is of great use > for this purpose! I have an 8 port serial Boca card here, which I have yet to get running. How does comms/conserver-com work? I couldn't determine that from the FAQ. Does it need any hardware? How does it monitor the serial console? Do you connect two boxes together via their serial ports? Box A reports on Box B, and vice versa? Or does it just monitor the serial console and report back to a central server? > I assumed here that usually you have more than one machine per physical > location; otherwise, I'd set up remote logging, preferrably to two different > machines via two different interfaces, but such ideal network design is > *rarely* reqchable ;-) I have one location which has only one box. That box and the bandwidth is kindly donated by BCHosting.com, and hosts freebsddiary.org, freshports.org, etc. It does about 45GB a month (at last check). I'd like to have a serial console there. But if it could the console remotely, that would be good. Cheers -- Dan Langille : http://www.langille.org/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Mozilla weirdness
On Thu, 2003-10-16 at 15:14, David Gerard wrote: > > anyone know why my Mozilla 1.4 has no spell check in mail? > > am i missing something here? > > > Yep - 1.4 doesn't come with the spell checker! It is included with > 1.4.1 or 1.5, though. > > > - d. If you don't want to install a brand new version of mozilla, there's a spellchecker extension available too. It's actually the same exact spell checker that's in 1.5. See spellchecker.mozdev.org. Charles Ulrich -- http://bityard.net ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
VMD in freebsd
Hi VMD it's not for freebsd how can i emulate vmd whith linux ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: savemail panic
Hallo [EMAIL PROTECTED], > This is written to messages and mailog: > > sendmail[74206]: h9I0iQvm074206: Losing ./qfh9I0iQvm074206: savemail panic > sendmail[74206]: h9I0iQvm074206: SYSERR(majordom): savemail: cannot save > rejected email anywhere > > The version of majordomo is 1.94.5_1. I am pretty lost here, any help is > appreciated. Sendmail is no longer SUID root, you need to change the permissions for majordomo. add users daemon/mailnull to the majordom group. Have you tried to reinstall the "majordomo" ? kind regards Dirk - Dirk Meyer, Im Grund 4, 34317 Habichtswald, Germany - [EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Problems with latest version of VICE emulator
I have been unable to get the latest version of the VICE Commodore emulator working (1.13 - built from the ports tree). The PET and Plus/4 emulator work, but the C64 and C128 emulators just give me a screen full of @'s and checkerboards. Is VICE working for anyone, or am I the only one crazy enough to be trying to run it? I have tried it on two different systems, one RELENG_4_8 and a recent RELENG_4 system. The last version (1.12) worked fine for me. Please cc: me on any replies as I am not subscribed to the list. Thanks in advance, Cory. __ Post your free ad now! http://personals.yahoo.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: XFree86-4-clients Build Failing
On Saturday 18 October 2003 06:52 am, billg wrote: > Thanks. That fixed it. > > I'm not sure, though, how "libraries' was deleted. Here's what how I > did the ports upgrade, after building the portupgrade port: > > 1. cvsup ./ports-supfile (stock ports-supfile pointing to > cvsup3.freebsd.org) > 2. make index && make readmes > 3. portsdb -Uu > 4. portsversion -l "<" > 5. pkgdb -F (portsversion found stale ORBit; I went with pkgdb > default responses) > 6. portupgrade -aRr > > Prior to this, I'd installed the lynx port and the epiphany port, > which, of course, brought in Mozilla, XFree86 and Gnome2. Did that > not install the libaries port? The Xfont library was installed by the new -libraryies. Then, you updated -server and it deleted them. The new -server didn't reinstall them. So, you have to reinstall -libraries to get Xfont back. The problem came about because Xfont was moved from one piece of XFree86 to the other. This is one type of upgrade that portupgrade can't handle automatically. If you had deleted -server before you ran portupgrade with -arR, you probably wouldn't have had any problems. There is another problem with gettext. You have to force rebuild the codes that have it as a dependancy. Kent > > On Sat, 2003-10-18 at 00:19, Kent Stewart wrote: > > On Friday 17 October 2003 08:14 pm, billg wrote: > > > XFree86-4-clients is failing to compile, producing this output: > > > > > > slipstream# make install > > > ===> Building for XFree86-clients-4.3.0_3 > > > making all in lib/lbxutil/lbx_zlib... > > > making all in lib/lbxutil/delta... > > > making all in lib/lbxutil/image... > > > making all in programs/appres... > > > making all in programs/bdftopcf... > > > rm -f bdftopcf > > > cc -o bdftopcf -O -pipe -ansi -Dasm=__asm -Wall -Wpointer-arith > > > -Wundef > > > -L/usr/ports/x11/XFree86-4-clients/work/xc/exports/lib bdftopcf.o > > > -lXfont -lfntstubs -L/usr/X11R6/lib -lz -lm > > > -Wl,-rpath,/usr/X11R6/lib > > > /usr/libexec/elf/ld: cannot find -lXfont > > > *** Error code 1 > > > > > > Stop in > > > /usr/ports/x11/XFree86-4-clients/work/xc/programs/bdftopcf. *** > > > Error code 1 > > > > > > Stop in /usr/ports/x11/XFree86-4-clients/work/xc/programs. > > > *** Error code 1 > > > > > > Stop in /usr/ports/x11/XFree86-4-clients. > > > > > > > > > This follows the first ports update on a new 4.8-release machine. > > > The linker can't seem to find "Xfont". Neither can I. > > > > > > I'd appreciate a point in the right direction. Thanks. > > > > It was caused by you deleting an old version of -server. You have > > to reinstalled -libraries and everything will be ok. > > > > Kent -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD's people
Dear FreeBSD Team, Can I recive place on people.freebsd.org to build my page about *bsd problems? Patrick Halczak ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: XFree86-4-clients Build Failing
Thanks. That fixed it. I'm not sure, though, how "libraries' was deleted. Here's what how I did the ports upgrade, after building the portupgrade port: 1. cvsup ./ports-supfile (stock ports-supfile pointing to cvsup3.freebsd.org) 2. make index && make readmes 3. portsdb -Uu 4. portsversion -l "<" 5. pkgdb -F (portsversion found stale ORBit; I went with pkgdb default responses) 6. portupgrade -aRr Prior to this, I'd installed the lynx port and the epiphany port, which, of course, brought in Mozilla, XFree86 and Gnome2. Did that not install the libaries port? On Sat, 2003-10-18 at 00:19, Kent Stewart wrote: > On Friday 17 October 2003 08:14 pm, billg wrote: > > XFree86-4-clients is failing to compile, producing this output: > > > > slipstream# make install > > ===> Building for XFree86-clients-4.3.0_3 > > making all in lib/lbxutil/lbx_zlib... > > making all in lib/lbxutil/delta... > > making all in lib/lbxutil/image... > > making all in programs/appres... > > making all in programs/bdftopcf... > > rm -f bdftopcf > > cc -o bdftopcf -O -pipe -ansi -Dasm=__asm -Wall -Wpointer-arith > > -Wundef -L/usr/ports/x11/XFree86-4-clients/work/xc/exports/lib > > bdftopcf.o -lXfont -lfntstubs -L/usr/X11R6/lib -lz -lm > > -Wl,-rpath,/usr/X11R6/lib > > /usr/libexec/elf/ld: cannot find -lXfont > > *** Error code 1 > > > > Stop in /usr/ports/x11/XFree86-4-clients/work/xc/programs/bdftopcf. > > *** Error code 1 > > > > Stop in /usr/ports/x11/XFree86-4-clients/work/xc/programs. > > *** Error code 1 > > > > Stop in /usr/ports/x11/XFree86-4-clients. > > > > > > This follows the first ports update on a new 4.8-release machine. The > > linker can't seem to find "Xfont". Neither can I. > > > > I'd appreciate a point in the right direction. Thanks. > > It was caused by you deleting an old version of -server. You have to > reinstalled -libraries and everything will be ok. > > Kent ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Dialup firewalling with FreeBSD
Readers of this list do not have ESP to read your mind, so you have to post details of your problem when asking for help. What version of FBSD are you running? What kind of dial out modem? Where you able to get connected to internet before activating IPFW? IPFW will not work if your modem is not found at boot time. Is your modem an winmodem? Post these files ppp.log ppp.conf rc.conf dmesg.boot If you are using FBSD 5.x version reinstall with 4.8 or 4.9 these are the supported production versions. The 5.x versions is for people who develop code changes to FBSD and is not intended for the general user like you. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of whole_r Sent: Friday, October 17, 2003 3:09 PM To: [EMAIL PROTECTED] Subject: Dialup firewalling with FreeBSD Hello, I followed this doc to install my firewall. Upon reboot I get about 12 lines more or less like this: ipfw: size mismatch (have 176 need..) It also says that dev tun0 doesn't exist. How do I correct this. TIA j hullATmonisys.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Dialup firewalling with FreeBSD
On Fri, 17 Oct 2003 15:09:21 -0400 "whole_r" <[EMAIL PROTECTED]> probably wrote: > Hello, > I followed this doc to install my firewall. Upon reboot I get about 12 lines > more or less like this: > > ipfw: size mismatch (have 176 need..) Don't know about this, probably the ipfw program doesn't talk correctly to the kernel, and you should rebuild (both or one of) your world and kernel but > It also says that dev tun0 doesn't exist. This is correct and OK, since you don't have a connection established at boot-time. After you have connected, the rule will get active just as you expect. -- DoubleF Organic chemistry is the chemistry of carbon compounds. Biochemistry is the study of carbon compounds that crawl. -- Mike Adams pgp0.pgp Description: PGP signature
Experience with Freevrrpd
Dear list: Has anyone on the list had experience with using Freevrrpd (available in ports)...??? Google has only brought up one reference which is useful about the config but have found nothing about this in the archives. Looking for a good way to switch main FBSD server/router to a backup to handle the service in the event of a crash. Freevrrpd claims to be able to do that. Thanks for any feedback at all. Best regards, Jack L. Stone, Administrator Sage American http://www.sage-american.com [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Howto find packages
On Thu, 16 Oct 2003, Simon Rutishauser wrote: > But, apt-cache isn't yet finished there. You can also run > > apt-cache show gnomeicu > > which presents you lots of details about the one package with this name: [...] > is there something like that for FreeBSD, too? pkg_info will provide most, if not all, of that information, provided you feed it the right command line options. -- David Fleck [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Sony CDRW drive on 5.1
Ekrem <[EMAIL PROTECTED]> writes: > On Sat, 2003-10-18 at 09:56, Anthony Carmody wrote: > > Hi, > > > > anyone got any tips on enabling & testing a CDRW drive on 5.1? > > > > ___ > > [EMAIL PROTECTED] mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > If it's IDE, then you need to add; > > device atapicam > > into the kernel configuration file and rebuild the kernel. > Then use (after a reboot) 'camcontrol devlist' to see if the CDRW drive > is recognised. The word "need" isn't really accurate there; burncd(8) works fine with an ATAPI drive on a stock kernel. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 5.1 USB Keyboard support
Hello,
I had the same problem and solved it with an rc.d script:
#!/bin/sh
#Script to enable usb keyboard if attached
case "$1" in
start)
if [ -e /dev/kbd1 ]; then
/usr/sbin/kbdcontrol -r 250.38 -k /dev/kbd1 < /dev/conso
le 2>&1 > /dev/null && echo -n ' usbkbd'
fi
;;
stop)
if [ -e /dev/kbd1 ]; then
/usr/sbin/kbdcontrol -r 250.38 -k /dev/kbd0 < /dev/conso
le 2>&1 > /dev/null && echo -n ' usbkbd'
fi
;;
*)
echo "Usage: `basename $0` { start | stop }"
exit 64
;;
esac
Basically, when initialising the system, this script checks to see if /dev/kbd1
exists, if so swops control to it, if not, nudda.
Hope this helps.
Matthew Faircliff
On Fri, Oct 17, 2003 at 10:04:17AM +0200, Peter wrote:
From: "Peter" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Date: Fri, 17 Oct 2003 10:04:17 +0200
X-Mailer: Microsoft Outlook Express 6.00.2800.1158
Subject: FreeBSD 5.1 USB Keyboard support
Hi Im using FreeBSD 5.1 and I can't get my Logitech USB keyboard to work directly in
the consol. I have search trough the net and found very little (either I searched
wrong or there is very little info).
In rc.conf I have added support for usb by
usbd_enable="YES"
>From the dmesg I can see that FreeBSD finds the keyboard and adds it like ukbd0:
>Logitech USB Receiver, rev 1.10/17.00, addr 3, iclass 3/1
kbd1 at ukbd0
The Kernel is rebuilt and has support for USB. As the GENERIC had it.
uhci0: port 0xc400-0xc41f irq 10 at device 16.0 on pci0
usb0: on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, bus powered
ukbd0: Logitech USB Receiver, rev 1.10/17.00, addr 3, iclass 3/1
kbd1 at ukbd0
ums0: Logitech USB Receiver, rev 1.10/17.00, addr 3, iclass 3/1
ums0: 7 buttons and Z dir.
ugen0: Logitech Camera, rev 1.00/1.00, addr 4
ugen1: vendor 0x0f4d product 0x1000, rev 1.10/4.01, addr 5
ulpt0: hp deskjet 5550, rev 2.00/1.00, addr 6, iclass 7/1
ulpt0: using bi-directional mode
uhci1: port 0xc800-0xc81f irq 11 at device 16.1 on pci0
usb1: on uhci1
usb1: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci2: port 0xcc00-0xcc1f irq 7 at device 16.2 on pci0
usb2: on uhci2
usb2: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
This is what I found searching through Google that should work:
kbdcontrol -k /dev/kbd1 < /dev/ttyv0
This works but I have to log through ssh from another comp and write that command and
sometimes it adds a letter that I just had written. That tends to be anyoing. And it
also doesnt start so that I can choose at the boot prompt.
Another thing I found was to put the following into usbd.conf
device "USB Keyboard"
devname "ukbd0"
attach "kbdcontrol -k /dev/kbd1 < /dev/ttyv0 > /dev/null"
detach "kbdcontrol -k /dev/kbd0 < /dev/ttyv0 > /dev/null"
This doesnt work at all for me nothing happens att all.
Is there a way to add USB keyboard support when FreeBSD is running in singelusermode
so that I have a chance of installing new kernels and upgrade the system right now I
plug in an old PS/2 keyboard?
My motherboard is Abit KD7-S with VIA KT400 and VT8235 chipset and the keyboard is
Logitech Cordles Desktop Comfort.
Thanks in Advance
Peter
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Invalid bootstrap :-(((
Hello freebsd-questions! I (or you!?) have a problem! I can't install FreeBSD 5.1 on the AlphaServer 4100. The issue is bootstrap failure in the floppy-image file KRNL.FLP (ftp://ftp.freebsd.org/pub/FreeBSD/releases/alpha/5.1-RELEASE/floppies/kern.flp). Krnl.flp for FreeBSD 4.8 (alpha) is good. Please, correct this image. -- Best regards, Igor Belyaev mailto:[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: mplayer + sound problem
+-- Bryan Cassidy [freebsd] [18-10-03 06:17 IST]: | I get this when trying to play movies in mplayer. | | audio_setup: Can't open audio device /dev/dsp: Device busy | AO: [arts] can't connect to aRts soundserver | /dev/dsp: Device busy | AO: [esd] esd_open_sound failed: Resource temporarily unavailable | ao_nas: init(): Can't open nas audio server -> nosound | SDL: Samplerate: 44100Hz Channels: Stereo Format Signed 16-bit (Little-Endian) | /dev/dsp: Device busy | SDL: Unable to open audio: No available audio device | try the following and then run mplayer killall -9 artsd -- With Best Regards, Shantanoo Mahajan ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Dialup firewalling with FreeBSD
On 2003-10-17 15:09, whole_r <[EMAIL PROTECTED]> wrote: > Hello, > I followed this doc to install my firewall. Upon reboot I get about 12 lines > more or less like this: > > ipfw: size mismatch (have 176 need..) > It also says that dev tun0 doesn't exist. > > How do I correct this. If your kernel and userland in sync? If not, try building world *and* kernel from the same sources and installing both, as described in the /usr/src/UPDATING file. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Sony CDRW drive on 5.1
On Sat, 2003-10-18 at 09:56, Anthony Carmody wrote: > Hi, > > anyone got any tips on enabling & testing a CDRW drive on 5.1? > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" If it's IDE, then you need to add; device atapicam into the kernel configuration file and rebuild the kernel. Then use (after a reboot) 'camcontrol devlist' to see if the CDRW drive is recognised. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 5.1 USB Keyboard support
Have you had a look at the handbook? I got my (Microsoft :D) Keyboard working with the stuff from there. Peschmä Am Fri, 17 Oct 2003 10:04:17 +0200 schrieb Peter: > Hi Im using FreeBSD 5.1 and I can't get my Logitech USB keyboard to work > directly in the consol. I have search trough the net and found very > little (either I searched wrong or there is very little info). > > In rc.conf I have added support for usb by usbd_enable="YES" >>From the dmesg I can see that FreeBSD finds the keyboard and adds it like >>ukbd0: Logitech USB Receiver, rev 1.10/17.00, addr 3, iclass 3/1 > kbd1 at ukbd0 > The Kernel is rebuilt and has support for USB. As the GENERIC had it. > > uhci0: port 0xc400-0xc41f irq 10 at device > 16.0 on pci0 usb0: on uhci0 usb0: USB revision > 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports > with 2 removable, self powered uhub1: Texas Instruments TUSB2046 hub, > class 9/0, rev 1.10/1.25, addr 2 uhub1: 4 ports with 4 removable, bus > powered ukbd0: Logitech USB Receiver, rev 1.10/17.00, addr 3, iclass 3/1 > kbd1 at ukbd0 > ums0: Logitech USB Receiver, rev 1.10/17.00, addr 3, iclass 3/1 ums0: 7 > buttons and Z dir. > ugen0: Logitech Camera, rev 1.00/1.00, addr 4 ugen1: vendor 0x0f4d product > 0x1000, rev 1.10/4.01, addr 5 ulpt0: hp deskjet 5550, rev 2.00/1.00, addr > 6, iclass 7/1 ulpt0: using bi-directional mode > uhci1: port 0xc800-0xc81f irq 11 at device > 16.1 on pci0 usb1: on uhci1 usb1: USB revision > 1.0 > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports > with 2 removable, self powered uhci2: port > 0xcc00-0xcc1f irq 7 at device 16.2 on pci0 usb2: controller> on uhci2 usb2: USB revision 1.0 > uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports > with 2 removable, self powered > > This is what I found searching through Google that should work: kbdcontrol > -k /dev/kbd1 < /dev/ttyv0 > This works but I have to log through ssh from another comp and write that > command and sometimes it adds a letter that I just had written. That > tends to be anyoing. And it also doesnt start so that I can choose at the > boot prompt. > > Another thing I found was to put the following into usbd.conf device "USB > Keyboard" > devname "ukbd0" > attach "kbdcontrol -k /dev/kbd1 < /dev/ttyv0 > /dev/null" detach > "kbdcontrol -k /dev/kbd0 < /dev/ttyv0 > /dev/null" > > This doesnt work at all for me nothing happens att all. > > Is there a way to add USB keyboard support when FreeBSD is running in > singelusermode so that I have a chance of installing new kernels and > upgrade the system right now I plug in an old PS/2 keyboard? > > My motherboard is Abit KD7-S with VIA KT400 and VT8235 chipset and the > keyboard is Logitech Cordles Desktop Comfort. > > Thanks in Advance > Peter > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions To > unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ipfw routing
hello I have to use a freebsd machine as a gateway router; I did manage to make natd work, but now I have also a subnet routed to the machine I'm looking for the ipfw command similar to iptables' -A FORWARD -d $subnet/ $mask -j ACCEPT also, what's the difference between ipfw add pass and ipfw add forward ? thanks, petre -- 10:03AM up 5 days, 22:09, 4 users, load averages: 1.81, 1.70, 1.58 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
