Re: error message
On Sun, 25 Nov 2012 22:44:57 -0700, emmanuel ilunga wrote: Hello, By ignorance, I named the host: machine0.example.com (just following what I saw.) Even though this has nothing to do with the error message you got, the name example.com is intended for _examples_ and not for actual use. It will usually be found in documentation and has the meaning of change this to what applies in _your_ case if you follow this example. Typical suggestions could be machine0.local or fbsd9.localdomain. If _may_ be possible that your ISP requires you do enter a specific host and domain name, or your setting requires this. There might be rules you have to follow. Besides, _you_ will decide about the name. You can change this information easily in /etc/rc.conf, it's the following setting: hostname=hostname.domainname You could also provide corresponding entries in /etc/hosts. Every time I reboot, I get: machine0# Nov26 04:37:03 machine0 ntpd_initrest[2008]:host name not found: 0.freebsd.pool.org The error message indicates that the name of the time server (for NTP), called 0.freebsd.pool.org, cannot be resolved to an IP. You should check your Internet connection and the setting for the resolver in /etc/resolv.conf. Can you access other machines on the Internet? This is what you should be able to do: % host 0.freebsd.pool.org 0.freebsd.pool.org has address 64.99.80.30 I get this error, unless I enter my login info; and after I had entered my login info, if I don't do anything else right away, this error message comes back. That's normal as NTP tries to make a connection to the specified server as long as it's running. You'll find the NTP related settings (ntpdate, ntpd) in /etc/rc.conf, plus examples and explanations in /etc/defaults/rc.conf. And the time is wrong too. Of course the time is wrong: It could not be adjusted because the required Internet connection to obtain the current time could not be made. You can manually set the time using the date command. See man date for details. Also, I received 4 installer discs: 2 installers and 2 important packages (2 for amd64 and 2 for i386), how do I read the appropriate Important Packages disc in? According to what architecture you're using (i386 _or_ amd64), you would probably use bsdinstall to deal with those discs (at least the older installer, sysinstall, could be used to install packages from the CDs or DVDs, so I assume this functionality would also be part of bsdinstall). The discs contain precompiled binary packages that you _can_ install (there is basically no need that forces you to install all of them!) by using the system's package management command, pkg_add (resp. pkg add). Simply mount the disc and install what you need. Those discs are typically provided for offline use when you cannot download software from the Internet. I assume you're using FreeBSD 9 already. In this case, refering to The FreeBSD Handbook about the steps of installation might be a good idea: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/bsdinstall.html I've got no deeper experience with bsdinstall so far, that's why I can't be more specific, sorry. -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: error message
On 26/11/2012 05:44, emmanuel ilunga wrote: By ignorance, I named the host: machine0.example.com (just following what I saw.) This is wrong -- example.com is a special purpose domain-name reserved for documentation. You need to choose yourself a proper domain name or use whatever your ISP provides. However, it has no bearing on the other problem you cite: Every time I reboot, I get: machine0# Nov26 04:37:03 machine0 ntpd_initrest[2008]:host name not found: 0.freebsd.pool.org I get this error, unless I enter my login info; and after I had entered my login info, if I don't do anything else right away, this error message comes back. And the time is wrong too. Also, I received 4 installer discs: 2 installers and 2 important packages (2 for amd64 and 2 for i386), how do I read the appropriate Important Packages disc in? What's happening here is that ntpd is trying to lookup 0.freebsd.pool.org in the DNS, and failing. This implies that DNS is not working at all for any of the applications on your system: ntpd is just the most vocal about complaining (and it will keep retrying and complaining for a long time). Examine the contents of /etc/resolv.conf and check that you can lookup names in the DNS using host(1) or dig(1). Fix that if it doesn't work and try again. If it does work, then maybe there's a problem with routing or your resolv.conf being dynamically generated during the boot sequence: such things can be fixed, but we'd need to know a lot more about the particulars of your systems in order to provide correct advice. Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. PGP: http://www.infracaninophile.co.uk/pgpkey signature.asc Description: OpenPGP digital signature
Re: Error message with portsnap
On 31/08/2010 24:23:52, Jerry wrote: Fetching snapshot tag from portsnap6.FreeBSD.org... done. Fetching snapshot metadata... fetch: http://portsnap6.FreeBSD.org/t/1ad44e525a0145a9daea915d8a8827be69a292caf91f9e22aac825eed3be2e41: No address record Looks like a transient problem with the DNS. It should fix itself once the correct data for portsnap6 propagates properly. Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matt...@infracaninophile.co.uk Kent, CT11 9PW signature.asc Description: OpenPGP digital signature
Re: Error Message when starting Apache
On Thu, 9 Apr 2009 20:14:21 +0200 Michael Heitmeier mhe...@gmail.com wrote: After installing Apache 2.2 it does not start and apachectl start fails with the error message /libexec/ld-elf.so.1: Shared object xchgptr not found, required by libapr-1.so.3 Searching on the Web and archives did not reveal anything, please let me know how to resolve this, thanks! I don't exactly your problem but I think you can resolve the it by reinstall Apache22 from port cd /usr/ports/www/apache22 make; make deinstall install Good luck! -- Ky Anh, Huynh Homepage: http://viettug.org/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: error message when starting smartd: FAILURE - SMART status=51 ...
On Sat, Jun 21, 2008 at 01:38:25PM +1200, Steven Samuel Cole wrote: Also, the disks are SATA300, the controller supports SATA150 only; there is a jumper on the disks that limits them to SATA150 which I removed. Could that be relevant ? Yes, it could be relevant. Several controllers have shown problems without this jumper in the past (VIA, 3ware...). Uwe ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: error message when starting smartd: FAILURE - SMART status=51 ...
Uwe Laverenz schrieb: On Sat, Jun 21, 2008 at 01:38:25PM +1200, Steven Samuel Cole wrote: Also, the disks are SATA300, the controller supports SATA150 only; there is a jumper on the disks that limits them to SATA150 which I removed. Could that be relevant ? Yes, it could be relevant. Several controllers have shown problems without this jumper in the past (VIA, 3ware...). Uwe ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Hey Uwe, thanks for your reply :-) I put the jumpers back in, but unfortunately, the messages persist :-( Cheers, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message with denyhosts
On Sun, 9 Dec 2007, Gerard wrote: I just installed 'denyhosts' on a FBSD-6.2 machine. I thought I had followed the directions correctly, however, I continually see an error message popping up on the screen. This is a line fro the /var/log/auth.log file. Dec 9 10:56:01 scorpio sshd[1477]: warning: /etc/hosts.allow, line 1: missing : separator This is the top of my /stc/hosts file: /sshd ^ All I added were the two lines preceding ALL : ALL : allow. What could be causing this problem? I don't seem to be missing any : separators. Not sure where that random /sshd came from, but the line 1 bit is a pretty big hint as to where the problem is ;) Andy --- Andy Dills Xecunet, Inc. www.xecu.net 301-682-9972 --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message with denyhosts
On December 09, 2007 at 12:14PM Andy Dills wrote: Not sure where that random /sshd came from, but the line 1 bit is a pretty big hint as to where the problem is ;) Andy I wondered about that to; however, until today, I have never even opened that file. I have no idea where if came from. I am assuming that you do not have a similar line in your file. I am going to comment it out and see if anything new transpires. Thanks! -- Gerard ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message: inetd[667]: ssh/tcp: bind: Address already in use
In the last episode (Mar 07), Andy Kendall said: Hi All, Can anyone please help me with this error message which pops up at regular intervals on the console and in the log? ssh is usually started as a daemon via /etc/rc.d/sshd, so it shouldn't be enabled via /etc/inetd.conf. Just comment out the ssh line in inetd.conf and bounce inetd. -- Dan Nelson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error Message with 'periodic weekly'
On 7/7/06, Gerard Seibert [EMAIL PROTECTED] wrote: I just did a fresh install of FBSD 6.1. When attempting to run: periodic weekly This error message is displayed: Jul 7 14:12:47 seibercom su: _secure_path: /nonexistent/.login_conf is not owned by uid 65534 First, /nonexistant should probably not exist. It is the home directory of the nobody user (uid 65534). I would just kill it `rm -rf /nonexistant` If it *does* exist that may not be a problem, as long as the nobody user does not have a valid shell, but /nonexistant is used by many system accounts so just setting the ACLs on it to `chmod -R nobody:nobody /nonexistant` probably won't help much. -- -- Perfection is just a word I use occasionally with mustard. --Atom Powers-- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error Message with Procmail
Gerard E. Seibert [EMAIL PROTECTED] writes: I just installed 'procmail' onto my FSBD 6.1 stable system. The following error message keeps appearing on screen at what appears random intervals. This one appeared as I booted up the system. Jun 24 11:41:14 seibercom procmail[749]: default rcfile is not an absolute path for uid 1002 I am not sure what it means or how to correct it. Everything appears to be working correctly. How are you invoking procmail? I'd be surprised if you didn't find that this message comes up whenever procmail tries to process a message for the user with uid 1002. Is the procmailrc specified by hand for that user, perhaps from a .forward file? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error Message with Procmail
Lowell Gilbert wrote: Gerard E. Seibert [EMAIL PROTECTED] writes: I just installed 'procmail' onto my FSBD 6.1 stable system. The following error message keeps appearing on screen at what appears random intervals. This one appeared as I booted up the system. Jun 24 11:41:14 seibercom procmail[749]: default rcfile is not an absolute path for uid 1002 I am not sure what it means or how to correct it. Everything appears to be working correctly. How are you invoking procmail? I'd be surprised if you didn't find that this message comes up whenever procmail tries to process a message for the user with uid 1002. Is the procmailrc specified by hand for that user, perhaps from a .forward file? I found the problem. The path to the use did not start with a '/'. I checked the password file and discovered it. That simple error had gone unnoticed for three months until I installed Procmail. -- Gerard Seibert [EMAIL PROTECTED] The reserve of modern assertions is sometimes pushed to extremes, in which the fear of being contradicted leads the writer to strip himself of almost all sense and meaning. Sir Winston Leonard Spencer Churchill ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error Message Upon Reboot
On Jun 2, 2006, at 1:21 PM, Gerard E. Seibert wrote: The following error message suddenly appeared after I booted up my system. The PC is connected to a small LAN. I Googled but was not able to find out what the message is suppose to mean. //Error Message Below// ~ $ Jun 2 15:01:56 seibercom kernel: arp: 00:07:e9:ea:f5:52 is using my IP address 192.168.0.2! //End Error Message// Since I have not seen this message before, I was wondering it is something I should be worried about. It means another computer on the same LAN is using your same address that your machine assumed when it booted. Are you using DHCP? If yes, is everyone on the LAN using DHCP? Chad --- Chad Leigh -- Shire.Net LLC Your Web App and Email hosting provider chad at shire.net ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error Message Upon Reboot
On Fri, 2 Jun 2006 15:21:13 -0400 (EDT) Gerard E. Seibert [EMAIL PROTECTED] wrote: The following error message suddenly appeared after I booted up my system. The PC is connected to a small LAN. I Googled but was not able to find out what the message is suppose to mean. //Error Message Below// ~ $ Jun 2 15:01:56 seibercom kernel: arp: 00:07:e9:ea:f5:52 is using my IP address 192.168.0.2! //End Error Message// Since I have not seen this message before, I was wondering it is something I should be worried about. It means you have two machines on your network with the same IP. -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error Message Upon Boot-up
On Sun, May 28, 2006 at 03:52:02PM -0400, Gerard E. Seibert wrote: Using: FreeBSD 6.1 I have suddenly started seeing an error message upon boot-up. This is a snippet of the display when the error message is displayed. Starting mysql. dnetcStarting ddclient. /etc/rc: WARNING: $compat5x_enable is not set properly - see rc.conf(5). You need: compat5x_enable=YES in /etc/rc.conf -- Jonathan Chen [EMAIL PROTECTED] -- Nyuck, nyuck, nyuck - Curly ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error Message Upon Boot-up
Jonathan Chen [EMAIL PROTECTED] On Sun, May 28, 2006 at 03:52:02PM -0400, Gerard E. Seibert wrote: Using: FreeBSD 6.1 I have suddenly started seeing an error message upon boot-up. This is a snippet of the display when the error message is displayed. Starting mysql. dnetcStarting ddclient. /etc/rc: WARNING: $compat5x_enable is not set properly - see rc.conf(5). You need: compat5x_enable=YES in /etc/rc.conf I searched around and figured that out. Now I have a few other questions. 1) How did it suddenly get in my /usr/local/etc/rc.d directory anyway? 2) If it is not specifically enabled or disabled in the rc.conf file, why is it complaining? Other files in ./rc.d do not complain if there is no entry in the rc.conf file. They just do not start. At least that is what I believe happens. 3) Would this be considered a bug of some type? -- Gerard Seibert [EMAIL PROTECTED] Never underestimate the power of stupid people in large groups. Anonymous ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error Message on Boot
On Tue, 22 Nov 2005 20:55:46 -0800, Micah [EMAIL PROTECTED] Subject: Re: Error Message on Boot Wrote these words of wisdom: Gerard Seibert wrote: Running FreeBSD 5.4, I receive this error message while booting up: Updating KDM configuration Information: reading old kdmrc /usr/local/share/config/kdm/kdmrc (from kde = 2.2.x) Information: old kdmrc is from kde = 3.1 (config version 2.3) This message appears everytime I boot. I have the latest version of KDE installed. Is there anything I can do to correct this? Been having this message too, but since it's a non-critical issue I haven't looked at it until now. The message comes from running genkdmconf to update your KDM configuration. The latest KDE has installed /usr/local/etc/rc.d/genkdmconf.sh which runs the real genkdmconf in update mode every time you boot. I'm not exactly sure why this is necessary, since the files really only need to be updated if/when you've changed your configuration or upgraded KDE. If the messages bother you, move (or remove) genkdmconf.sh from rc.d. Personally, since I now know the messages' origin I'll just ignore them. Later, Micah *** REPLY SEPARATOR *** On 11/23/2005 5:37:51 AM Gerard Replied: Thanks. I had already figured out what was causing it, and have subsequently disabled the file from running. I have no idea why it is being run on every boot either. It does seem like over kill. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error Message on Boot
Gerard Seibert wrote: Running FreeBSD 5.4, I receive this error message while booting up: Updating KDM configuration Information: reading old kdmrc /usr/local/share/config/kdm/kdmrc (from kde = 2.2.x) Information: old kdmrc is from kde = 3.1 (config version 2.3) This message appears everytime I boot. I have the latest version of KDE installed. Is there anything I can do to correct this? Been having this message too, but since it's a non-critical issue I haven't looked at it until now. The message comes from running genkdmconf to update your KDM configuration. The latest KDE has installed /usr/local/etc/rc.d/genkdmconf.sh which runs the real genkdmconf in update mode every time you boot. I'm not exactly sure why this is necessary, since the files really only need to be updated if/when you've changed your configuration or upgraded KDE. If the messages bother you, move (or remove) genkdmconf.sh from rc.d. Personally, since I now know the messages' origin I'll just ignore them. Later, Micah ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message while running 'portsdb -Uu'
On Mon, Oct 24, 2005 at 08:27:21PM -0400, Gerard Seibert wrote: I just updated my ports using cvsup and then proceeded to run 'portsdb -Uu' to generate the index file. Upon completion, it produced this error message: Updating the ports index ... Generating INDEX.tmp - please wait..jot: infinite sequences cannot be bounded Makefile, line 19: warning: /usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status jot: infinite sequences cannot be bounded /usr/ports/editors/vim-lite/../vim/Makefile, line 19: warning: /usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status jot: infinite sequences cannot be bounded /usr/ports/editors/vim6+ruby/../vim/Makefile, line 19: warning: /usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status Warning: Duplicate INDEX entry: freeciv-gtk2-2.0.6 Warning: Duplicate INDEX entry: mod_frontpage2-5.0.2.2635 Warning: Duplicate INDEX entry: mod_jk2-apache2-2.0.4 Warning: Duplicate INDEX entry: mod_rpaf-ap2-0.5 Done. I have never seen that one before. What does it mean, and what should I do to correct it, it anything? cvsup again, and in general, read discussion on ports@ before sending duplicate reports :) Kris pgpAgS7lTvPf8.pgp Description: PGP signature
Re: Error message while running 'portsdb -Uu'
On Tue, Oct 25, 2005 at 02:35:54PM -0400, Gerard Seibert wrote: On Tuesday, October 25, 2005 2:03:43 PM, Kris Kennaway [EMAIL PROTECTED] Subject: Re: Error message while running 'portsdb -Uu' Wrote these words of wisdom: On Mon, Oct 24, 2005 at 08:27:21PM -0400, Gerard Seibert wrote: I just updated my ports using cvsup and then proceeded to run 'portsdb -Uu' to generate the index file. Upon completion, it produced this error message: Updating the ports index ... Generating INDEX.tmp - please wait..jot: infinite sequences cannot be bounded Makefile, line 19: warning: /usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status jot: infinite sequences cannot be bounded /usr/ports/editors/vim-lite/../vim/Makefile, line 19: warning: /usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status jot: infinite sequences cannot be bounded /usr/ports/editors/vim6+ruby/../vim/Makefile, line 19: warning: /usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status Warning: Duplicate INDEX entry: freeciv-gtk2-2.0.6 Warning: Duplicate INDEX entry: mod_frontpage2-5.0.2.2635 Warning: Duplicate INDEX entry: mod_jk2-apache2-2.0.4 Warning: Duplicate INDEX entry: mod_rpaf-ap2-0.5 Done. I have never seen that one before. What does it mean, and what should I do to correct it, it anything? cvsup again, and in general, read discussion on ports@ before sending duplicate reports :) Kris * REPLY SEPARATOR * On 10/11/2005 5:29:42 PM, Gerard Replied: Excuse me, but what 'duplicate reports' are you referring to? Others reporting the same problem, which was introduced a day or so ago and then fixed. Kris pgpVQtodAfSIm.pgp Description: PGP signature
Re: Error message while running 'portsdb -Uu'
On Tuesday, October 25, 2005 2:59:24 PM, Kris Kennaway kris at obsecurity.org
Wrote these words of wisdom:
On Tue, Oct 25, 2005 at 02:35:54PM -0400, Gerard Seibert wrote:
On Tuesday, October 25, 2005 2:03:43 PM, Kris Kennaway kris at
obsecurity.org
Subject: Re: Error message while running 'portsdb -Uu'
Wrote these words of wisdom:
On Mon, Oct 24, 2005 at 08:27:21PM -0400, Gerard Seibert wrote:
I just updated my ports using cvsup and then proceeded to run 'portsdb
-Uu' to generate the index file. Upon completion, it produced this error
message:
Updating the ports index ... Generating INDEX.tmp - please wait..jot:
infinite sequences cannot be bounded Makefile, line 19: warning:
/usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status jot:
infinite sequences cannot be bounded
/usr/ports/editors/vim-lite/../vim/Makefile, line 19: warning:
/usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status jot:
infinite sequences cannot be bounded
/usr/ports/editors/vim6+ruby/../vim/Makefile, line 19: warning:
/usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status
Warning: Duplicate INDEX entry: freeciv-gtk2-2.0.6
Warning: Duplicate INDEX entry: mod_frontpage2-5.0.2.2635
Warning: Duplicate INDEX entry: mod_jk2-apache2-2.0.4
Warning: Duplicate INDEX entry: mod_rpaf-ap2-0.5
Done.
I have never seen that one before. What does it mean, and what should I
do to correct it, it anything?
cvsup again, and in general, read discussion on ports@ before sending
duplicate reports :)
Kris
I updated today with portsnap, and I'm seeing a different problem-- at
least, it appears to me to be of a much different nature:
# portsdb -uU
Updating the ports index ... Generating INDEX.tmp - please wait..
Makefile, line 30: warning: String comparison operator should be
either == or !=
Makefile, line 30: Malformed conditional (defined(PHP_VERS)
${PHP_VERS} 436)
Makefile, line 30: Need an operator
Makefile, line 32: if-less endif
Makefile, line 32: Need an operator
make: fatal errors encountered -- cannot continue
=== net/pear-Net_DNSBL failed
*** Error code 1
1 error
I haven't seen anything on -questions or -ports recently reporting
these errors. Is this related?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message while running 'portsdb -Uu'
On Tue, Oct 25, 2005 at 08:43:34PM -0400, John DeStefano wrote:
On Tuesday, October 25, 2005 2:59:24 PM, Kris Kennaway kris at
obsecurity.org
Wrote these words of wisdom:
On Tue, Oct 25, 2005 at 02:35:54PM -0400, Gerard Seibert wrote:
On Tuesday, October 25, 2005 2:03:43 PM, Kris Kennaway kris at
obsecurity.org
Subject: Re: Error message while running 'portsdb -Uu'
Wrote these words of wisdom:
On Mon, Oct 24, 2005 at 08:27:21PM -0400, Gerard Seibert wrote:
I just updated my ports using cvsup and then proceeded to run 'portsdb
-Uu' to generate the index file. Upon completion, it produced this
error
message:
Updating the ports index ... Generating INDEX.tmp - please wait..jot:
infinite sequences cannot be bounded Makefile, line 19: warning:
/usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status
jot:
infinite sequences cannot be bounded
/usr/ports/editors/vim-lite/../vim/Makefile, line 19: warning:
/usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status
jot:
infinite sequences cannot be bounded
/usr/ports/editors/vim6+ruby/../vim/Makefile, line 19: warning:
/usr/bin/jot -s -w 6.4.%03d 0 1 0 returned non-zero status
Warning: Duplicate INDEX entry: freeciv-gtk2-2.0.6
Warning: Duplicate INDEX entry: mod_frontpage2-5.0.2.2635
Warning: Duplicate INDEX entry: mod_jk2-apache2-2.0.4
Warning: Duplicate INDEX entry: mod_rpaf-ap2-0.5
Done.
I have never seen that one before. What does it mean, and what should
I
do to correct it, it anything?
cvsup again, and in general, read discussion on ports@ before sending
duplicate reports :)
Kris
I updated today with portsnap, and I'm seeing a different problem-- at
least, it appears to me to be of a much different nature:
# portsdb -uU
Updating the ports index ... Generating INDEX.tmp - please wait..
Makefile, line 30: warning: String comparison operator should be
either == or !=
Makefile, line 30: Malformed conditional (defined(PHP_VERS)
${PHP_VERS} 436)
Makefile, line 30: Need an operator
Makefile, line 32: if-less endif
Makefile, line 32: Need an operator
make: fatal errors encountered -- cannot continue
=== net/pear-Net_DNSBL failed
*** Error code 1
1 error
I haven't seen anything on -questions or -ports recently reporting
these errors. Is this related?
Doesn't seem to be. Do you define PHP_VERS by hand?
Kris
pgpwOC6pUHp8s.pgp
Description: PGP signature
Re: Error message
On Mon, 29 Nov 2004 08:17:40 -0600 Mike Horwath [EMAIL PROTECTED] wrote: On Mon, Nov 29, 2004 at 06:12:20PM +0530, Akhthar Parvez. K wrote: Hi All, I am getting the following error message in /var/log/messages tail -f /var/log/messages Nov 29 07:24:31 speedy /kernel: pid 83876 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:31 speedy /kernel: pid 84126 (httpd), uid 65534: exited on signal 4 [snipper] #define SIGILL 4 /* illegal instr. (not reset when caught) */ Anyhave has any idea why it's coming? I am not getting any error messsages in apache error logs. Only time I have seen this kind of thing is bad hardware. It may also be the case that the wrong CPUTYPE is/was specified in /etc/make.conf. Bye, Alexander. -- The best things in life are free, but the expensive ones are still worth a look. http://www.Leidinger.net Alexander @ Leidinger.net GPG fingerprint = C518 BC70 E67F 143F BE91 3365 79E2 9C60 B006 3FE7 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message
Alexander Leidinger wrote: On Mon, 29 Nov 2004 08:17:40 -0600 Mike Horwath [EMAIL PROTECTED] wrote: On Mon, Nov 29, 2004 at 06:12:20PM +0530, Akhthar Parvez. K wrote: Hi All, I am getting the following error message in /var/log/messages tail -f /var/log/messages Nov 29 07:24:31 speedy /kernel: pid 83876 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:31 speedy /kernel: pid 84126 (httpd), uid 65534: exited on signal 4 [snipper] #define SIGILL 4 /* illegal instr. (not reset when caught) */ Anyhave has any idea why it's coming? I am not getting any error messsages in apache error logs. Only time I have seen this kind of thing is bad hardware. It may also be the case that the wrong CPUTYPE is/was specified in /etc/make.conf. Are you running old enough version of apache to be vulnerable to remote exploits but they're trying to feed you wrong shellcode? Pete ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message
Akhthar Parvez. K [EMAIL PROTECTED] wrote: Hi All, I am getting the following error message in /var/log/messages tail -f /var/log/messages Nov 29 07:24:31 speedy /kernel: pid 83876 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:31 speedy /kernel: pid 84126 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:31 speedy /kernel: pid 84208 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:33 speedy /kernel: pid 83867 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:34 speedy /kernel: pid 84207 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:35 speedy /kernel: pid 84138 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:36 speedy /kernel: pid 84064 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:37 speedy /kernel: pid 84141 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:38 speedy /kernel: pid 84255 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:39 speedy /kernel: pid 84233 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:42 speedy /kernel: pid 84258 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:43 speedy /kernel: pid 84165 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:43 speedy /kernel: pid 84200 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:45 speedy /kernel: pid 84174 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:45 speedy /kernel: pid 84199 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:49 speedy /kernel: pid 83871 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:50 speedy /kernel: pid 84164 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:52 speedy /kernel: pid 84102 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:52 speedy /kernel: pid 84167 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:52 speedy /kernel: pid 84212 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:53 speedy /kernel: pid 84168 (httpd), uid 65534: exited on signal 4 Anyhave has any idea why it's coming? I am not getting any error messsages in apache error logs. Please wrap your lines around 72 chars. See http://www.lemis.com/questions.html What version of Apache are you running? What modules does it have installed. Answering those questions will narrow down the problem and you can start researching it in more detail. Also, looking through your http access and error logs to correlate times will help tell you what's causing the problem. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message
On Mon, Nov 29, 2004 at 06:12:20PM +0530, Akhthar Parvez. K wrote: Hi All, I am getting the following error message in /var/log/messages tail -f /var/log/messages Nov 29 07:24:31 speedy /kernel: pid 83876 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:31 speedy /kernel: pid 84126 (httpd), uid 65534: exited on signal 4 [snipper] #define SIGILL 4 /* illegal instr. (not reset when caught) */ Anyhave has any idea why it's coming? I am not getting any error messsages in apache error logs. Only time I have seen this kind of thing is bad hardware. -- Mike Horwath, reachable via [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message
(trimmed CC list; this is not a performance issue) On Mon, Nov 29, 2004 at 08:17:40AM -0600, Mike Horwath typed: On Mon, Nov 29, 2004 at 06:12:20PM +0530, Akhthar Parvez. K wrote: Hi All, I am getting the following error message in /var/log/messages tail -f /var/log/messages Nov 29 07:24:31 speedy /kernel: pid 83876 (httpd), uid 65534: exited on signal 4 Nov 29 07:24:31 speedy /kernel: pid 84126 (httpd), uid 65534: exited on signal 4 [snipper] #define SIGILL 4 /* illegal instr. (not reset when caught) */ Anyhave has any idea why it's coming? I am not getting any error messsages in apache error logs. Only time I have seen this kind of thing is bad hardware. This can also happen with software optimized for a different CPU than it is currently running on. Ruben ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message with 'portupgrade'
On Sun, Nov 28, 2004 at 01:18:55PM -0500, Gerard Seibert wrote: I just updated to FreeBSD 5.3. While running 'portupgrade' the following non fatal error message is displayed: Vulnerability check disabled, dada base not found I do not remember seeing this when I had version 5.2.1 installed. Obviously I have forgotten to do something, but I cannot remember what. Could someone kindly assist me? man portaudit Kris pgpELnK1wf7I8.pgp Description: PGP signature
Re: Error message with 'portupgrade'
Gerard Seibert wrote: I just updated to FreeBSD 5.3. While running 'portupgrade' the following non fatal error message is displayed: Vulnerability check disabled, dada base not found I do not remember seeing this when I had version 5.2.1 installed. Obviously I have forgotten to do something, but I cannot remember what. Could someone kindly assist me? Thanks! Gerard E. Seibert [EMAIL PROTECTED] Install portaudit -- Best regards, Chris The repairman will never have seen a model quite like yours before. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message with 'portupgrade'
On Sun, Nov 28, 2004 at 10:26:02AM -0800, Kris Kennaway wrote: On Sun, Nov 28, 2004 at 01:18:55PM -0500, Gerard Seibert wrote: I just updated to FreeBSD 5.3. While running 'portupgrade' the following non fatal error message is displayed: Vulnerability check disabled, dada base not found I do not remember seeing this when I had version 5.2.1 installed. Obviously I have forgotten to do something, but I cannot remember what. Could someone kindly assist me? man portaudit Er, by which I mean, 'see the portaudit port'. Kris pgpLPnRdQ1x5a.pgp Description: PGP signature
Re: Error Message Installing GCC 3.4
On Sat, Feb 21, 2004 at 03:28:57PM -0500, [EMAIL PROTECTED] wrote: I am running FreeBSD version 5.2.1. While doing a ports install of GCC 3.4, everything went normally until the following error message appeared on my screen. I have no idea what it means or refers to. Perhaps someone can assist me. gmake[2]: *** [fibheap.o] Error 1 You omitted the actual error, which would have been above this line. Kris pgp0.pgp Description: PGP signature
Re: Error Message
On Monday, October 20, 2003, at 02:11 PM, Bob Moore Computer Recruiters TekJobs.com wrote: I'm doing pine -inbox-path=users/tekjobs/mail/Trash Gives me this message Your terminal, of type ansi, is lacking functions needed to run pine. What do I need to do? Where are you running pine? If you're logging in directly on the machine, setting TERM to 'cons25' is likely correct. If you're running X-windows, try using 'xterm' or 'vt100' as the value of TERM. -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error message trying to set up sound card
Hello, On Sun, 2003-01-05 at 21:22, Tom Parquette wrote: I'm following the Handbook instructions trying to set up a sound card. At boot, I get the following messages. pcm0: Creative CT5880-C irq 10 at device 6.0 on pci2 pcm0: unable to map register space devide_probe_and_attach: pcm0 attach returned 6 Searching the questions archive didn't turn up anything helpful. Can anybody give me a push in the right direction? TIA... You might want to check for the following (presuming that you're not actually running -CURRENT):- 1] That there are no IRQ conflicts with this device 2] Make sure that the P 'n P OS option in the BIOS is disabled Regards, Stacey To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message -- Stacey Roberts B.Sc (HONS) Computer Science Web: www.vickiandstacey.com To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: Error message trying to set up sound card
Stacey Roberts wrote: Hello, On Sun, 2003-01-05 at 21:22, Tom Parquette wrote: I'm following the Handbook instructions trying to set up a sound card. At boot, I get the following messages. pcm0: Creative CT5880-C irq 10 at device 6.0 on pci2 pcm0: unable to map register space devide_probe_and_attach: pcm0 attach returned 6 Searching the questions archive didn't turn up anything helpful. Can anybody give me a push in the right direction? TIA... You might want to check for the following (presuming that you're not actually running -CURRENT):- 1] That there are no IRQ conflicts with this device 2] Make sure that the P 'n P OS option in the BIOS is disabled Regards, Stacey To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message #1 This is FreeBSD 4.7-STABLE #2 I've been looking at the motherboard's manual, and the BIOS setup, and there does not appear to be a way to turn off PNP OS. This is a Tyan Thunder K7X. I did try clearing the ESCD data but that did not seem to help. Thanks folks... To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: Error message trying to set up sound card
On Sun, 5 Jan 2003, Tom Parquette wrote: Date: Sun, 05 Jan 2003 20:47:11 -0500 From: Tom Parquette [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: FreeBSD Questions [EMAIL PROTECTED] Subject: Re: Error message trying to set up sound card Stacey Roberts wrote: Hello, On Sun, 2003-01-05 at 21:22, Tom Parquette wrote: I'm following the Handbook instructions trying to set up a sound card. At boot, I get the following messages. pcm0: Creative CT5880-C irq 10 at device 6.0 on pci2 pcm0: unable to map register space devide_probe_and_attach: pcm0 attach returned 6 I've always beat this error by disabling 'PnP OS Installed' or it's equivalent in my BIOS. Check your BIOS, disable the 'PnP OS' support and you should be all set. Good luck. JB # John Bleichert # http://vonbek.dhs.org/latest.jpg To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: Error message trying to set up sound card
Hi Tom, On Mon, 2003-01-06 at 01:47, Tom Parquette wrote: Stacey Roberts wrote: Hello, On Sun, 2003-01-05 at 21:22, Tom Parquette wrote: I'm following the Handbook instructions trying to set up a sound card. At boot, I get the following messages. pcm0: Creative CT5880-C irq 10 at device 6.0 on pci2 pcm0: unable to map register space devide_probe_and_attach: pcm0 attach returned 6 snipped You might want to check for the following (presuming that you're not actually running -CURRENT):- 1] That there are no IRQ conflicts with this device 2] Make sure that the P 'n P OS option in the BIOS is disabled Regards, Stacey sniped #1 This is FreeBSD 4.7-STABLE #2 I've been looking at the motherboard's manual, and the BIOS setup, and there does not appear to be a way to turn off PNP OS. This is a Tyan Thunder K7X. I presume that this is the MoBo: http://www.tyan.com/products/html/thunderk7x.html I use Tyan dual boards, but only for Intel. I would have thought that Tyan would keep the format of their documentation straight regardless of AMD / Intel arch. Please have another look through the manual, just in case we're missing something in our haste:-) I noted this at the Tyan site: Expansion Slots One AGP Pro slot; also supports 4x AGP One 64-bit 66MHz (3.3-volt) PCI slot One 64-bit 66MHz (5-volt) PCI slot Three 32-bit 33MHz (5-Volt) PCI slots Total of six usable slots Now I see no mention of an integrated sound card, so I presume that you've inserted a PCI card. I neglected to ask, but exactly what model sound card is it? Which slot is the card installed to? Check the card docs to see if it matches any of the requirements of the available slots as described here. Regards, Stacey I did try clearing the ESCD data but that did not seem to help. Thanks folks... To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message -- Stacey Roberts B.Sc (HONS) Computer Science Web: www.vickiandstacey.com To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
