Re: Is this possible to expand only one row in table display?
Hello, I am not sure if it is possible using TBDISPL service. I am able to do that using dynamic area in panels. Of course, more work, more controls... Dan Sent from Yahoo Mail for iPhone On Monday, February 12, 2018, 3:39 PM, ITschak Mugzach <imugz...@gmail.com> wrote: Tried that. it does show as two lines including cases where the second line is empty. I wonder how can I suppress empty lines displayed using TBDISPL service ITschak On Mon, Feb 12, 2018 at 5:52 PM, Carmen Vitullo <cvitu...@hughes.net> wrote: > ITschak, logically I think that works, but I wonder if initially the > row's, even if the data is not presented without the "+" would not the row > still display as 2 rows > if I am understaing correctly using the )MODEL CLEAR(xx) panel option > may be what you're looking for ? > > > I've done similar but using one row - I've never tried expanding beyond > that > > > > +--- > > > )MODEL CLEAR(SELECT) ROWS(ALL) > > > @Z+ #DDNAME #DSN #DISP1 #DISP2+ > > > )INIT > > > .ZVARS='(SELECT)' > > > )END > > Carmen Vitullo > > - Original Message - > > From: "ITschak Mugzach" <imugz...@gmail.com> > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Monday, February 12, 2018 9:43:30 AM > Subject: Re: Is this possible to expand only one row in table display? > > Carmen, > > I may not explained my issue the problem is "HOW". I can think of one > option that i'll try later today that goes like this: > > - remember crp > - add name to table row with a value coppied from a real NAMES variable > - The panel )model section should always be defined with two rows, The > first that I want to display and the second is has the addded name to row. > This way only one row will have this variable. > - at end, update the variable defined at NAMES and delete the name from > varlist. > > I hope there is a better, more elegant way that will allow doing that. > > ITschak > > On Mon, Feb 12, 2018 at 5:21 PM, Carmen Vitullo <cvitu...@hughes.net> > wrote: > > > If the ISPF application is your own you can do what you want. you have to > > code the dialog to take an action when the user puts a plus sign in the > > line operator '_' much like the ISPF ISMF dialog. > > I'm not sure if the table row display (PANEL) can be altered once > > displayed without a new table panel being displayed based on the + line > > operator, I've not designed any ISPF applications for a while, maybe you > > can. > > I would think you'd need to perform a TBDISPL with a panel LIKE the panel > > you are presenting, with the additional fields, keeping the current row > > position, then once the - minus sign or END command is entered, you'd go > > back to the original display. > > this would be a good exercise and I'm sure some folks that still develop > > ISPF applications would know for sure. > > > > Carmen Vitullo > > > > - Original Message - > > > > From: "ITschak Mugzach" <imugz...@gmail.com> > > To: IBM-MAIN@LISTSERV.UA.EDU > > Sent: Monday, February 12, 2018 8:57:02 AM > > Subject: Is this possible to expand only one row in table display? > > > > Assume I am listing datasets ip OPT3.4. It is an ISPF table (DSLx). > > also assume I have access to code. I would like to enter a plus sign in > > front of a tbe entry and get the rest of the rows listed bebind the row, > > without affecting the other rows display (of course they mill move down. > > When I click '-' is will close the display. Is this possible with Table > > display? I know how to do that with dynamic areas but it is a more > > complex. > > > > Thanks for your ideas. > > > > -- > > ITschak Mugzach > > *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring > > for Legacy **| * > > > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > > > -- > ITschak Mugzach > *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring > for Legacy **| * > > -- > For IBM-MAIN subscribe / signoff /
Re: Is this possible to expand only one row in table display?
I'm thinking it would have to be defined as a dynamic data area like the ISRUDSL0 panel 26 AREA(DYNAMIC) EXTEND(ON) SCROLL(ON) I've never had a need to define or use a dynamic area, so I'm sorry I'm not much help here. I'd probably have to do some 'fake out dynamic area' table display using 2 different panels to get those results. initial panel tbdisp(table) panel(dpanel1) with the initial zvars then in the dialog if = '+' then tbdispl(table) panel(dpanel2) with all zvars endif something simple like that, not the best way without using a data area Carmen Vitullo - Original Message - From: "ITschak Mugzach" <imugz...@gmail.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Monday, February 12, 2018 11:39:12 AM Subject: Re: Is this possible to expand only one row in table display? Tried that. it does show as two lines including cases where the second line is empty. I wonder how can I suppress empty lines displayed using TBDISPL service ITschak On Mon, Feb 12, 2018 at 5:52 PM, Carmen Vitullo <cvitu...@hughes.net> wrote: > ITschak, logically I think that works, but I wonder if initially the > row's, even if the data is not presented without the "+" would not the row > still display as 2 rows > if I am understaing correctly using the )MODEL CLEAR(xx) panel option > may be what you're looking for ? > > > I've done similar but using one row - I've never tried expanding beyond > that > > > > +--- > > > )MODEL CLEAR(SELECT) ROWS(ALL) > > > @Z+ #DDNAME #DSN #DISP1 #DISP2+ > > > )INIT > > > .ZVARS='(SELECT)' > > > )END > > Carmen Vitullo > > - Original Message - > > From: "ITschak Mugzach" <imugz...@gmail.com> > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Monday, February 12, 2018 9:43:30 AM > Subject: Re: Is this possible to expand only one row in table display? > > Carmen, > > I may not explained my issue the problem is "HOW". I can think of one > option that i'll try later today that goes like this: > > - remember crp > - add name to table row with a value coppied from a real NAMES variable > - The panel )model section should always be defined with two rows, The > first that I want to display and the second is has the addded name to row. > This way only one row will have this variable. > - at end, update the variable defined at NAMES and delete the name from > varlist. > > I hope there is a better, more elegant way that will allow doing that. > > ITschak > > On Mon, Feb 12, 2018 at 5:21 PM, Carmen Vitullo <cvitu...@hughes.net> > wrote: > > > If the ISPF application is your own you can do what you want. you have to > > code the dialog to take an action when the user puts a plus sign in the > > line operator '_' much like the ISPF ISMF dialog. > > I'm not sure if the table row display (PANEL) can be altered once > > displayed without a new table panel being displayed based on the + line > > operator, I've not designed any ISPF applications for a while, maybe you > > can. > > I would think you'd need to perform a TBDISPL with a panel LIKE the panel > > you are presenting, with the additional fields, keeping the current row > > position, then once the - minus sign or END command is entered, you'd go > > back to the original display. > > this would be a good exercise and I'm sure some folks that still develop > > ISPF applications would know for sure. > > > > Carmen Vitullo > > > > - Original Message - > > > > From: "ITschak Mugzach" <imugz...@gmail.com> > > To: IBM-MAIN@LISTSERV.UA.EDU > > Sent: Monday, February 12, 2018 8:57:02 AM > > Subject: Is this possible to expand only one row in table display? > > > > Assume I am listing datasets ip OPT3.4. It is an ISPF table (DSLx). > > also assume I have access to code. I would like to enter a plus sign in > > front of a tbe entry and get the rest of the rows listed bebind the row, > > without affecting the other rows display (of course they mill move down. > > When I click '-' is will close the display. Is this possible with Table > > display? I know how to do that with dynamic areas but it is a more > > complex. > > > > Thanks for your ideas. > > > > -- > > ITschak Mugzach > > *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring > > for Legacy **| * > > > > -- > > For IB
Re: Is this possible to expand only one row in table display?
Tried that. it does show as two lines including cases where the second line is empty. I wonder how can I suppress empty lines displayed using TBDISPL service ITschak On Mon, Feb 12, 2018 at 5:52 PM, Carmen Vitullo <cvitu...@hughes.net> wrote: > ITschak, logically I think that works, but I wonder if initially the > row's, even if the data is not presented without the "+" would not the row > still display as 2 rows > if I am understaing correctly using the )MODEL CLEAR(xx) panel option > may be what you're looking for ? > > > I've done similar but using one row - I've never tried expanding beyond > that > > > > +--- > > > )MODEL CLEAR(SELECT) ROWS(ALL) > > > @Z+ #DDNAME #DSN #DISP1 #DISP2+ > > > )INIT > > > .ZVARS='(SELECT)' > > > )END > > Carmen Vitullo > > - Original Message - > > From: "ITschak Mugzach" <imugz...@gmail.com> > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Monday, February 12, 2018 9:43:30 AM > Subject: Re: Is this possible to expand only one row in table display? > > Carmen, > > I may not explained my issue the problem is "HOW". I can think of one > option that i'll try later today that goes like this: > > - remember crp > - add name to table row with a value coppied from a real NAMES variable > - The panel )model section should always be defined with two rows, The > first that I want to display and the second is has the addded name to row. > This way only one row will have this variable. > - at end, update the variable defined at NAMES and delete the name from > varlist. > > I hope there is a better, more elegant way that will allow doing that. > > ITschak > > On Mon, Feb 12, 2018 at 5:21 PM, Carmen Vitullo <cvitu...@hughes.net> > wrote: > > > If the ISPF application is your own you can do what you want. you have to > > code the dialog to take an action when the user puts a plus sign in the > > line operator '_' much like the ISPF ISMF dialog. > > I'm not sure if the table row display (PANEL) can be altered once > > displayed without a new table panel being displayed based on the + line > > operator, I've not designed any ISPF applications for a while, maybe you > > can. > > I would think you'd need to perform a TBDISPL with a panel LIKE the panel > > you are presenting, with the additional fields, keeping the current row > > position, then once the - minus sign or END command is entered, you'd go > > back to the original display. > > this would be a good exercise and I'm sure some folks that still develop > > ISPF applications would know for sure. > > > > Carmen Vitullo > > > > - Original Message - > > > > From: "ITschak Mugzach" <imugz...@gmail.com> > > To: IBM-MAIN@LISTSERV.UA.EDU > > Sent: Monday, February 12, 2018 8:57:02 AM > > Subject: Is this possible to expand only one row in table display? > > > > Assume I am listing datasets ip OPT3.4. It is an ISPF table (DSLx). > > also assume I have access to code. I would like to enter a plus sign in > > front of a tbe entry and get the rest of the rows listed bebind the row, > > without affecting the other rows display (of course they mill move down. > > When I click '-' is will close the display. Is this possible with Table > > display? I know how to do that with dynamic areas but it is a more > > complex. > > > > Thanks for your ideas. > > > > -- > > ITschak Mugzach > > *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring > > for Legacy **| * > > > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > > > -- > ITschak Mugzach > *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring > for Legacy **| * > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- ITschak Mugzach *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring for Legacy **| * -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Is this possible to expand only one row in table display?
ITschak, logically I think that works, but I wonder if initially the row's, even if the data is not presented without the "+" would not the row still display as 2 rows if I am understaing correctly using the )MODEL CLEAR(xx) panel option may be what you're looking for ? I've done similar but using one row - I've never tried expanding beyond that +--- )MODEL CLEAR(SELECT) ROWS(ALL) @Z+ #DDNAME #DSN #DISP1 #DISP2+ )INIT .ZVARS='(SELECT)' )END Carmen Vitullo - Original Message - From: "ITschak Mugzach" <imugz...@gmail.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Monday, February 12, 2018 9:43:30 AM Subject: Re: Is this possible to expand only one row in table display? Carmen, I may not explained my issue the problem is "HOW". I can think of one option that i'll try later today that goes like this: - remember crp - add name to table row with a value coppied from a real NAMES variable - The panel )model section should always be defined with two rows, The first that I want to display and the second is has the addded name to row. This way only one row will have this variable. - at end, update the variable defined at NAMES and delete the name from varlist. I hope there is a better, more elegant way that will allow doing that. ITschak On Mon, Feb 12, 2018 at 5:21 PM, Carmen Vitullo <cvitu...@hughes.net> wrote: > If the ISPF application is your own you can do what you want. you have to > code the dialog to take an action when the user puts a plus sign in the > line operator '_' much like the ISPF ISMF dialog. > I'm not sure if the table row display (PANEL) can be altered once > displayed without a new table panel being displayed based on the + line > operator, I've not designed any ISPF applications for a while, maybe you > can. > I would think you'd need to perform a TBDISPL with a panel LIKE the panel > you are presenting, with the additional fields, keeping the current row > position, then once the - minus sign or END command is entered, you'd go > back to the original display. > this would be a good exercise and I'm sure some folks that still develop > ISPF applications would know for sure. > > Carmen Vitullo > > - Original Message - > > From: "ITschak Mugzach" <imugz...@gmail.com> > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Monday, February 12, 2018 8:57:02 AM > Subject: Is this possible to expand only one row in table display? > > Assume I am listing datasets ip OPT3.4. It is an ISPF table (DSLx). > also assume I have access to code. I would like to enter a plus sign in > front of a tbe entry and get the rest of the rows listed bebind the row, > without affecting the other rows display (of course they mill move down. > When I click '-' is will close the display. Is this possible with Table > display? I know how to do that with dynamic areas but it is a more > complex. > > Thanks for your ideas. > > -- > ITschak Mugzach > *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring > for Legacy **| * > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- ITschak Mugzach *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring for Legacy **| * -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Is this possible to expand only one row in table display?
Carmen, I may not explained my issue the problem is "HOW". I can think of one option that i'll try later today that goes like this: - remember crp - add name to table row with a value coppied from a real NAMES variable - The panel )model section should always be defined with two rows, The first that I want to display and the second is has the addded name to row. This way only one row will have this variable. - at end, update the variable defined at NAMES and delete the name from varlist. I hope there is a better, more elegant way that will allow doing that. ITschak On Mon, Feb 12, 2018 at 5:21 PM, Carmen Vitullo <cvitu...@hughes.net> wrote: > If the ISPF application is your own you can do what you want. you have to > code the dialog to take an action when the user puts a plus sign in the > line operator '_' much like the ISPF ISMF dialog. > I'm not sure if the table row display (PANEL) can be altered once > displayed without a new table panel being displayed based on the + line > operator, I've not designed any ISPF applications for a while, maybe you > can. > I would think you'd need to perform a TBDISPL with a panel LIKE the panel > you are presenting, with the additional fields, keeping the current row > position, then once the - minus sign or END command is entered, you'd go > back to the original display. > this would be a good exercise and I'm sure some folks that still develop > ISPF applications would know for sure. > > Carmen Vitullo > > - Original Message - > > From: "ITschak Mugzach" <imugz...@gmail.com> > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Monday, February 12, 2018 8:57:02 AM > Subject: Is this possible to expand only one row in table display? > > Assume I am listing datasets ip OPT3.4. It is an ISPF table (DSLx). > also assume I have access to code. I would like to enter a plus sign in > front of a tbe entry and get the rest of the rows listed bebind the row, > without affecting the other rows display (of course they mill move down. > When I click '-' is will close the display. Is this possible with Table > display? I know how to do that with dynamic areas but it is a more > complex. > > Thanks for your ideas. > > -- > ITschak Mugzach > *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring > for Legacy **| * > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- ITschak Mugzach *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring for Legacy **| * -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Is this possible to expand only one row in table display?
If the ISPF application is your own you can do what you want. you have to code the dialog to take an action when the user puts a plus sign in the line operator '_' much like the ISPF ISMF dialog. I'm not sure if the table row display (PANEL) can be altered once displayed without a new table panel being displayed based on the + line operator, I've not designed any ISPF applications for a while, maybe you can. I would think you'd need to perform a TBDISPL with a panel LIKE the panel you are presenting, with the additional fields, keeping the current row position, then once the - minus sign or END command is entered, you'd go back to the original display. this would be a good exercise and I'm sure some folks that still develop ISPF applications would know for sure. Carmen Vitullo - Original Message - From: "ITschak Mugzach" <imugz...@gmail.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Monday, February 12, 2018 8:57:02 AM Subject: Is this possible to expand only one row in table display? Assume I am listing datasets ip OPT3.4. It is an ISPF table (DSLx). also assume I have access to code. I would like to enter a plus sign in front of a tbe entry and get the rest of the rows listed bebind the row, without affecting the other rows display (of course they mill move down. When I click '-' is will close the display. Is this possible with Table display? I know how to do that with dynamic areas but it is a more complex. Thanks for your ideas. -- ITschak Mugzach *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring for Legacy **| * -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Is this possible to expand only one row in table display?
Assume I am listing datasets ip OPT3.4. It is an ISPF table (DSLx). also assume I have access to code. I would like to enter a plus sign in front of a tbe entry and get the rest of the rows listed bebind the row, without affecting the other rows display (of course they mill move down. When I click '-' is will close the display. Is this possible with Table display? I know how to do that with dynamic areas but it is a more complex. Thanks for your ideas. -- ITschak Mugzach *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring for Legacy **| * -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN