Re: [JAWS-Users] can you read me?
Hi John, I know that Outlook 2010 has a Tools menu but, since I don't run this email client I can't give you the steps to get into, Tools / Accounts / Properties. Hopefully someone on the list running Outlook 2010 can give better instructions. Sorry but, Outlook is just way above my pay grade, & I don't need all it's functions so, I stick to Outlook Express. Sorry I couldn't have been of more help. Take care. Mike Sent from my iBarstool. Dodgers, try again next year! - Original Message - From: John Fitzgerald To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 9:48 PM Subject: Re: [JAWS-Users] can you read me? Mike, How do you accomplish this in Outlook 2010, there is no listing for tools? John Fitzgerald Muse, Oklahoma Article V Convention of States http://www.cosaction.com/?recruiter_id=1022484 -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike B. Sent: Sunday, October 23, 2016 4:29 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] can you read me? Hi Andy, You can try the following in Gmail to see if this will get you a copy of your posts: Assuming you're using a standard e-mail client like Outlook Express or Outlook, open up the tools menu, then arrow down to accounts and press enter. Once in the dialog box, highlight your Gmail account, and tab to the properties button, and press the spacebar. You should be on the General Tab. Now, tab down to the e-mail address edit field. In that field, type the word recent with a colon before your e-mail address. So, if you're typing this information into your e-mail field, you would type in: recent:dwmaster...@gmail.com Tab down to the apply button, press the spacebar, then shift+tab back to the ok button and press the spacebar. You'll land back on the accounts dialog box, at which point, you tab to the close button, then press the spacebar again. The next time you send and receive your messages, you'll receive each and every message you ever sent via Gmail, so be prepared to get a flood of e-mails once you do this. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: REGilman To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 12:35 PM Subject: Re: [JAWS-Users] can you read me? Hi Andy, Last I knew is that if you were using a Gmail account you would not see your own messages. Thanks, Bob -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of andy Sent: Sunday, October 23, 2016 2:45 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] can you read me?
Mike, How do you accomplish this in Outlook 2010, there is no listing for tools? John Fitzgerald Muse, Oklahoma Article V Convention of States http://www.cosaction.com/?recruiter_id=1022484 -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike B. Sent: Sunday, October 23, 2016 4:29 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] can you read me? Hi Andy, You can try the following in Gmail to see if this will get you a copy of your posts: Assuming you're using a standard e-mail client like Outlook Express or Outlook, open up the tools menu, then arrow down to accounts and press enter. Once in the dialog box, highlight your Gmail account, and tab to the properties button, and press the spacebar. You should be on the General Tab. Now, tab down to the e-mail address edit field. In that field, type the word recent with a colon before your e-mail address. So, if you're typing this information into your e-mail field, you would type in: recent:dwmaster...@gmail.com Tab down to the apply button, press the spacebar, then shift+tab back to the ok button and press the spacebar. You'll land back on the accounts dialog box, at which point, you tab to the close button, then press the spacebar again. The next time you send and receive your messages, you'll receive each and every message you ever sent via Gmail, so be prepared to get a flood of e-mails once you do this. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: REGilman To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 12:35 PM Subject: Re: [JAWS-Users] can you read me? Hi Andy, Last I knew is that if you were using a Gmail account you would not see your own messages. Thanks, Bob -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of andy Sent: Sunday, October 23, 2016 2:45 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Changing an email address in a group
For Pam. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of TheHangMan Sent: Saturday, October 22, 2016 8:14 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Changing an email address in a group Hi Pam Highlight the contact, press the content key command and enter on properties. Arrow down past the third edit box and go to send from thisaddress / contact and re-edit the contact info, when done press alt S to save. You're back in your inbox. Jorge -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Pam Mahuika Sent: Saturday, October 22, 2016 2:41 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Changing an email address in a group Hi how do you change a members email address in a group. Am using outlook 2010 and JFW17 on a windows 7 machine. Pam Mahuika South Dunedin Otago New Zealand Skype: pam mahuika For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Editing an Email address in a distribution list
Hi could the person who sent me instructions on how to change a person's email address in a group as I've accidently deleted it before I moved it to my Instructions folder. Pam Mahuika South Dunedin Otago New Zealand Skype: pam mahuika For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued
Adrian: Well, needless to say, I'm disappointed too. It seems like with newer updates to Outlook, certain things that used to work no longer do. It was very clear that I was near where I needed to be, but Jaws just was not tracking correctly. When I get the chance, I'll try the Jaws cursor as you suggest, to see if that helps. Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 10:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I'm disappointed. You'll note that in his original instructions, David said it got tricky here. I wonder if turning on the JAWS cursor might locate the checkbox for you. If it does, keep focus on that checkbox and try pressing insert-enter to uncheck. I can only say that in Outlook 2010, the right arrow works consistently on my machine. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 10:25 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Adrian: I'm still not having much luck here. In my version of Outlook 2016, again using Office 365 and Windows 7, I cannot find auto-numbering to uncheck, by pressing the right arrow key one time after unchecking auto-bulleting. The option just does not seem to be there. I think I'm going to have to get sighted assistance on this issue, although I'll be happy to try other suggestions. Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 6:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I hope David Whitehead won't mind if I re-post his instructions with some slight modifications. I notice his original didn't include the right arrow step to reach auto numbering. I'm working in Outlook 2010, but it looks as though the steps haven't changed from 2010 to 2016 because David's 2016 instructions work on my system. One question that remains for me is whether it's necessary to tab over to "Okay." I did so just in case, but it would be nice if we didn't have to. 1. From the File tab, click Options. Alt+f, t. 2. Select Mail and click the Spelling and Autocorrect button. You can press letter "m"=mail, or down-arrow to mail. Do not press enter. Tab. Enter on Spelling and Autocorrect button 3. In the Proofing section, click AutoCorrect Options. Tab enter on, AutoCorrect Options 4. Click the AutoFormat As You Type tab. 5. In the Apply as you type section, un-check Automatic bulleted lists, then right arrow once and check Automatic numbered lists. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 5:26 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Ah, ok, Adrian. You may be right. When I get some time later tonight, I'll give things a try again, especially with regard to your latest suggestion, and will let you know how things turn out. I appreciate your and everyone's patience! Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 5:16 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I'm guessing you're missing a step in David's instructions. When you land on the bullets checkbox, don't tab. Instead, right arrow once. Then automatic numbering turns up. Not exactly intuitive, I agree. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 2:38 PM To: 'Jaws users list' Subject: [JAWS-Users] Stopping Autonumbering In Outlook 2016 continued Hello, everyone. I have tried the steps sent to me by Kimsan, David, and Joseph, and still can't get auto-numbering to be turned off in Outlook 2016 e-mails. I am not sure if this is a Jaws issue, because when I get to the auto-numbering as you type options, I can find auto-bulleting which I have unchecked, but can't find auto-numbering. Again, I must point out that I'm using Outlook 2016 with Office 365 and Windows 7 here. This is extremely frustrating, and should not be this difficult. Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued
Adrian and all: I swallowed my pride, and got my wife's sighted assistance with this issue. It turns out that for whatever reason, Jaws was not tracking my options and selections correctly. For example, even though auto-numbering was indeed in the next column right after auto-bulleting, hitting my right arrow key once simply was not getting me there. Nevertheless, I'm going to save these updated instructions for future reference, should the problem recur. At least I was close to the options I needed to pay attention to. Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 6:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I hope David Whitehead won't mind if I re-post his instructions with some slight modifications. I notice his original didn't include the right arrow step to reach auto numbering. I'm working in Outlook 2010, but it looks as though the steps haven't changed from 2010 to 2016 because David's 2016 instructions work on my system. One question that remains for me is whether it's necessary to tab over to "Okay." I did so just in case, but it would be nice if we didn't have to. 1. From the File tab, click Options. Alt+f, t. 2. Select Mail and click the Spelling and Autocorrect button. You can press letter "m"=mail, or down-arrow to mail. Do not press enter. Tab. Enter on Spelling and Autocorrect button 3. In the Proofing section, click AutoCorrect Options. Tab enter on, AutoCorrect Options 4. Click the AutoFormat As You Type tab. 5. In the Apply as you type section, un-check Automatic bulleted lists, then right arrow once and check Automatic numbered lists. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 5:26 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Ah, ok, Adrian. You may be right. When I get some time later tonight, I'll give things a try again, especially with regard to your latest suggestion, and will let you know how things turn out. I appreciate your and everyone's patience! Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 5:16 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I'm guessing you're missing a step in David's instructions. When you land on the bullets checkbox, don't tab. Instead, right arrow once. Then automatic numbering turns up. Not exactly intuitive, I agree. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 2:38 PM To: 'Jaws users list' Subject: [JAWS-Users] Stopping Autonumbering In Outlook 2016 continued Hello, everyone. I have tried the steps sent to me by Kimsan, David, and Joseph, and still can't get auto-numbering to be turned off in Outlook 2016 e-mails. I am not sure if this is a Jaws issue, because when I get to the auto-numbering as you type options, I can find auto-bulleting which I have unchecked, but can't find auto-numbering. Again, I must point out that I'm using Outlook 2016 with Office 365 and Windows 7 here. This is extremely frustrating, and should not be this difficult. Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued
Tom, I'm disappointed. You'll note that in his original instructions, David said it got tricky here. I wonder if turning on the JAWS cursor might locate the checkbox for you. If it does, keep focus on that checkbox and try pressing insert-enter to uncheck. I can only say that in Outlook 2010, the right arrow works consistently on my machine. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 10:25 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Adrian: I'm still not having much luck here. In my version of Outlook 2016, again using Office 365 and Windows 7, I cannot find auto-numbering to uncheck, by pressing the right arrow key one time after unchecking auto-bulleting. The option just does not seem to be there. I think I'm going to have to get sighted assistance on this issue, although I'll be happy to try other suggestions. Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 6:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I hope David Whitehead won't mind if I re-post his instructions with some slight modifications. I notice his original didn't include the right arrow step to reach auto numbering. I'm working in Outlook 2010, but it looks as though the steps haven't changed from 2010 to 2016 because David's 2016 instructions work on my system. One question that remains for me is whether it's necessary to tab over to "Okay." I did so just in case, but it would be nice if we didn't have to. 1. From the File tab, click Options. Alt+f, t. 2. Select Mail and click the Spelling and Autocorrect button. You can press letter "m"=mail, or down-arrow to mail. Do not press enter. Tab. Enter on Spelling and Autocorrect button 3. In the Proofing section, click AutoCorrect Options. Tab enter on, AutoCorrect Options 4. Click the AutoFormat As You Type tab. 5. In the Apply as you type section, un-check Automatic bulleted lists, then right arrow once and check Automatic numbered lists. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 5:26 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Ah, ok, Adrian. You may be right. When I get some time later tonight, I'll give things a try again, especially with regard to your latest suggestion, and will let you know how things turn out. I appreciate your and everyone's patience! Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 5:16 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I'm guessing you're missing a step in David's instructions. When you land on the bullets checkbox, don't tab. Instead, right arrow once. Then automatic numbering turns up. Not exactly intuitive, I agree. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 2:38 PM To: 'Jaws users list' Subject: [JAWS-Users] Stopping Autonumbering In Outlook 2016 continued Hello, everyone. I have tried the steps sent to me by Kimsan, David, and Joseph, and still can't get auto-numbering to be turned off in Outlook 2016 e-mails. I am not sure if this is a Jaws issue, because when I get to the auto-numbering as you type options, I can find auto-bulleting which I have unchecked, but can't find auto-numbering. Again, I must point out that I'm using Outlook 2016 with Office 365 and Windows 7 here. This is extremely frustrating, and should not be this difficult. Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued
Mike, thanks for catching this. As you clearly guessed, "uncheck" is the answer. I'll copy the corrected instructions below so that no one has to add note after note. In going through the dialog again, I also confirmed that you need to tab to the Okay button and press spacebar, after which you can exit the dialog. So, here are the updated instructions. Once again, the credit is due to David Whitehead. 1. From the File tab, click Options. Alt+f, t. 2. Select Mail and click the Spelling and Autocorrect button. You can press letter "m"=mail, or down-arrow to mail. Do not press enter. Tab. Enter on Spelling and Autocorrect button 3. In the Proofing section, tab to and click AutoCorrect Options. Tab enter on AutoCorrect Options 4. Click the AutoFormat As You Type tab. 5. In the Apply as you type section, un-check Automatic bulleted lists, then right arrow once and uncheck Automatic numbered lists. 6. Tab to Okay. Exit the dialog with escape. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike B. Sent: Sunday, October 23, 2016 8:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Hi Adrian, In step #5, 5. In the Apply as you type section, un-check Automatic bulleted lists, then right arrow once and check Automatic numbered lists. Is checking, Automatic numbered lists, correct or, should this be, uncheck? Just want to make sure before I save this note. Thanks much. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: Adrian Spratt To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 3:37 PM Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I hope David Whitehead won't mind if I re-post his instructions with some slight modifications. I notice his original didn't include the right arrow step to reach auto numbering. I'm working in Outlook 2010, but it looks as though the steps haven't changed from 2010 to 2016 because David's 2016 instructions work on my system. One question that remains for me is whether it's necessary to tab over to "Okay." I did so just in case, but it would be nice if we didn't have to. 1. From the File tab, click Options. Alt+f, t. 2. Select Mail and click the Spelling and Autocorrect button. You can press letter "m"=mail, or down-arrow to mail. Do not press enter. Tab. Enter on Spelling and Autocorrect button 3. In the Proofing section, click AutoCorrect Options. Tab enter on, AutoCorrect Options 4. Click the AutoFormat As You Type tab. 5. In the Apply as you type section, un-check Automatic bulleted lists, then right arrow once and check Automatic numbered lists. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 5:26 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Ah, ok, Adrian. You may be right. When I get some time later tonight, I'll give things a try again, especially with regard to your latest suggestion, and will let you know how things turn out. I appreciate your and everyone's patience! Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 5:16 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I'm guessing you're missing a step in David's instructions. When you land on the bullets checkbox, don't tab. Instead, right arrow once. Then automatic numbering turns up. Not exactly intuitive, I agree. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 2:38 PM To: 'Jaws users list' Subject: [JAWS-Users] Stopping Autonumbering In Outlook 2016 continued Hello, everyone. I have tried the steps sent to me by Kimsan, David, and Joseph, and still can't get auto-numbering to be turned off in Outlook 2016 e-mails. I am not sure if this is a Jaws issue, because when I get to the auto-numbering as you type options, I can find auto-bulleting which I have unchecked, but can't find auto-numbering. Again, I must point out that I'm using Outlook 2016 with Office 365 and Windows 7 here. This is extremely frustrating, and should not be this difficult. Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked
Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued
Adrian: I'm still not having much luck here. In my version of Outlook 2016, again using Office 365 and Windows 7, I cannot find auto-numbering to uncheck, by pressing the right arrow key one time after unchecking auto-bulleting. The option just does not seem to be there. I think I'm going to have to get sighted assistance on this issue, although I'll be happy to try other suggestions. Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 6:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I hope David Whitehead won't mind if I re-post his instructions with some slight modifications. I notice his original didn't include the right arrow step to reach auto numbering. I'm working in Outlook 2010, but it looks as though the steps haven't changed from 2010 to 2016 because David's 2016 instructions work on my system. One question that remains for me is whether it's necessary to tab over to "Okay." I did so just in case, but it would be nice if we didn't have to. 1. From the File tab, click Options. Alt+f, t. 2. Select Mail and click the Spelling and Autocorrect button. You can press letter "m"=mail, or down-arrow to mail. Do not press enter. Tab. Enter on Spelling and Autocorrect button 3. In the Proofing section, click AutoCorrect Options. Tab enter on, AutoCorrect Options 4. Click the AutoFormat As You Type tab. 5. In the Apply as you type section, un-check Automatic bulleted lists, then right arrow once and check Automatic numbered lists. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 5:26 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Ah, ok, Adrian. You may be right. When I get some time later tonight, I'll give things a try again, especially with regard to your latest suggestion, and will let you know how things turn out. I appreciate your and everyone's patience! Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 5:16 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I'm guessing you're missing a step in David's instructions. When you land on the bullets checkbox, don't tab. Instead, right arrow once. Then automatic numbering turns up. Not exactly intuitive, I agree. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 2:38 PM To: 'Jaws users list' Subject: [JAWS-Users] Stopping Autonumbering In Outlook 2016 continued Hello, everyone. I have tried the steps sent to me by Kimsan, David, and Joseph, and still can't get auto-numbering to be turned off in Outlook 2016 e-mails. I am not sure if this is a Jaws issue, because when I get to the auto-numbering as you type options, I can find auto-bulleting which I have unchecked, but can't find auto-numbering. Again, I must point out that I'm using Outlook 2016 with Office 365 and Windows 7 here. This is extremely frustrating, and should not be this difficult. Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] jaws17 sapi5 crashing
its not just jaws but NVDA also crashes so must be an issue with this particular sapi5 synth. On 10/23/2016 9:52 PM, Mike B. wrote: Hi Josh, Try the following: 1. Press, Insert / Jaws key, Control, + S, to open your Voice Profiles options. 2. Arrow up or down to, Eloquence, & press enter. HTH Take care. Mike Sent from my iBarstool. Dodgers, try again next year! - Original Message - From: Josh Kennedy To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 6:22 PM Subject: [JAWS-Users] jaws17 sapi5 crashing hi using a demo of jaws17, i switched to sapi5 and this particular tts engine is crashing jaws. and now when i load jaws it talks for a second or 2 and crashes. how do i switch jaws back to regular eloquence maybe from a command line prompt or something or modding a configuration file manually? thanks josh -- mozilla thunderbird email client For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ -- mozilla thunderbird email client For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] jaws17 sapi5 crashing
Hi Josh, Try the following: 1. Press, Insert / Jaws key, Control, + S, to open your Voice Profiles options. 2. Arrow up or down to, Eloquence, & press enter. HTH Take care. Mike Sent from my iBarstool. Dodgers, try again next year! - Original Message - From: Josh Kennedy To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 6:22 PM Subject: [JAWS-Users] jaws17 sapi5 crashing hi using a demo of jaws17, i switched to sapi5 and this particular tts engine is crashing jaws. and now when i load jaws it talks for a second or 2 and crashes. how do i switch jaws back to regular eloquence maybe from a command line prompt or something or modding a configuration file manually? thanks josh -- mozilla thunderbird email client For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] jaws17 sapi5 crashing
hi using a demo of jaws17, i switched to sapi5 and this particular tts engine is crashing jaws. and now when i load jaws it talks for a second or 2 and crashes. how do i switch jaws back to regular eloquence maybe from a command line prompt or something or modding a configuration file manually? thanks josh -- mozilla thunderbird email client For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued
Hi Adrian, In step #5, 5. In the Apply as you type section, un-check Automatic bulleted lists, then right arrow once and check Automatic numbered lists. Is checking, Automatic numbered lists, correct or, should this be, uncheck? Just want to make sure before I save this note. Thanks much. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: Adrian Spratt To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 3:37 PM Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I hope David Whitehead won't mind if I re-post his instructions with some slight modifications. I notice his original didn't include the right arrow step to reach auto numbering. I'm working in Outlook 2010, but it looks as though the steps haven't changed from 2010 to 2016 because David's 2016 instructions work on my system. One question that remains for me is whether it's necessary to tab over to "Okay." I did so just in case, but it would be nice if we didn't have to. 1. From the File tab, click Options. Alt+f, t. 2. Select Mail and click the Spelling and Autocorrect button. You can press letter "m"=mail, or down-arrow to mail. Do not press enter. Tab. Enter on Spelling and Autocorrect button 3. In the Proofing section, click AutoCorrect Options. Tab enter on, AutoCorrect Options 4. Click the AutoFormat As You Type tab. 5. In the Apply as you type section, un-check Automatic bulleted lists, then right arrow once and check Automatic numbered lists. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 5:26 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Ah, ok, Adrian. You may be right. When I get some time later tonight, I'll give things a try again, especially with regard to your latest suggestion, and will let you know how things turn out. I appreciate your and everyone's patience! Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 5:16 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I'm guessing you're missing a step in David's instructions. When you land on the bullets checkbox, don't tab. Instead, right arrow once. Then automatic numbering turns up. Not exactly intuitive, I agree. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 2:38 PM To: 'Jaws users list' Subject: [JAWS-Users] Stopping Autonumbering In Outlook 2016 continued Hello, everyone. I have tried the steps sent to me by Kimsan, David, and Joseph, and still can't get auto-numbering to be turned off in Outlook 2016 e-mails. I am not sure if this is a Jaws issue, because when I get to the auto-numbering as you type options, I can find auto-bulleting which I have unchecked, but can't find auto-numbering. Again, I must point out that I'm using Outlook 2016 with Office 365 and Windows 7 here. This is extremely frustrating, and should not be this difficult. Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Silence is not golden!
Wayne, if you are running Windows 10, you can always do winds key plus enter to activate narrator. That said, if jaws goes out, I first do a windows plus letter R for run and type in jaws17 and press enter and jaws may come back up. Or narrator comes up with the windows enter key. John in sunny and warm southwest florida -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of wayne smith Sent: Sunday, October 23, 2016 7:24 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Silence is not golden! For us, silence is not especially golden. I just had my computer freeze after I saved some Learning All books from my SD card to a folder in my C drive. The computer went silent. My wife told me that there was a warning on the screen and the option to run a reset to an earlier point. The point is that if my wife wasn't there I would be stuck in the silence. Any thoughts on options other than to hold down the power button until I force a shutdown? Wayne For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] can you read me?
Hi Gino, You only do it for each Outlook Gmail account through its Outlook properties but, not the website. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: Geno9802 To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 2:13 PM Subject: [JAWS-Users] can you read me? So Mike, curious me, do you do this, Me With Windows 7, Outlook office-E-mail and do I do this just in Outlook in the accounts on all three G-mail accounts and do I have to do it up on The G-mail site with my account there too? -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike B. Sent: Sunday, October 23, 2016 4:29 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] can you read me? Hi Andy, You can try the following in Gmail to see if this will get you a copy of your posts: Assuming you're using a standard e-mail client like Outlook Express or Outlook, open up the tools menu, then arrow down to accounts and press enter. Once in the dialog box, highlight your Gmail account, and tab to the properties button, and press the spacebar. You should be on the General Tab. Now, tab down to the e-mail address edit field. In that field, type the word recent with a colon before your e-mail address. So, if you're typing this information into your e-mail field, you would type in: recent:dwmaster...@gmail.com Tab down to the apply button, press the spacebar, then shift+tab back to the ok button and press the spacebar. You'll land back on the accounts dialog box, at which point, you tab to the close button, then press the spacebar again. The next time you send and receive your messages, you'll receive each and every message you ever sent via Gmail, so be prepared to get a flood of e-mails once you do this. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: REGilman To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 12:35 PM Subject: Re: [JAWS-Users] can you read me? Hi Andy, Last I knew is that if you were using a Gmail account you would not see your own messages. Thanks, Bob -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of andy Sent: Sunday, October 23, 2016 2:45 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Silence is not golden!
For us, silence is not especially golden. I just had my computer freeze after I saved some Learning All books from my SD card to a folder in my C drive. The computer went silent. My wife told me that there was a warning on the screen and the option to run a reset to an earlier point. The point is that if my wife wasn't there I would be stuck in the silence. Any thoughts on options other than to hold down the power button until I force a shutdown? Wayne For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] can you read me?
Mike Thank you -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike B. Sent: Sunday, October 23, 2016 3:18 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] can you read me? Hi Andy, Yessir, loud & clear. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: andy To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 11:44 AM Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] can you read me?
Thank you for the response.. Hoe you have a tgreat day I will have to try that... -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Geno9802 Sent: Sunday, October 23, 2016 5:14 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? So Mike, curious me, do you do this, Me With Windows 7, Outlook office-E-mail and do I do this just in Outlook in the accounts on all three G-mail accounts and do I have to do it up on The G-mail site with my account there too? -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike B. Sent: Sunday, October 23, 2016 4:29 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] can you read me? Hi Andy, You can try the following in Gmail to see if this will get you a copy of your posts: Assuming you're using a standard e-mail client like Outlook Express or Outlook, open up the tools menu, then arrow down to accounts and press enter. Once in the dialog box, highlight your Gmail account, and tab to the properties button, and press the spacebar. You should be on the General Tab. Now, tab down to the e-mail address edit field. In that field, type the word recent with a colon before your e-mail address. So, if you're typing this information into your e-mail field, you would type in: recent:dwmaster...@gmail.com Tab down to the apply button, press the spacebar, then shift+tab back to the ok button and press the spacebar. You'll land back on the accounts dialog box, at which point, you tab to the close button, then press the spacebar again. The next time you send and receive your messages, you'll receive each and every message you ever sent via Gmail, so be prepared to get a flood of e-mails once you do this. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: REGilman To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 12:35 PM Subject: Re: [JAWS-Users] can you read me? Hi Andy, Last I knew is that if you were using a Gmail account you would not see your own messages. Thanks, Bob -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of andy Sent: Sunday, October 23, 2016 2:45 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued
Tom, I hope David Whitehead won't mind if I re-post his instructions with some slight modifications. I notice his original didn't include the right arrow step to reach auto numbering. I'm working in Outlook 2010, but it looks as though the steps haven't changed from 2010 to 2016 because David's 2016 instructions work on my system. One question that remains for me is whether it's necessary to tab over to "Okay." I did so just in case, but it would be nice if we didn't have to. 1. From the File tab, click Options. Alt+f, t. 2. Select Mail and click the Spelling and Autocorrect button. You can press letter "m"=mail, or down-arrow to mail. Do not press enter. Tab. Enter on Spelling and Autocorrect button 3. In the Proofing section, click AutoCorrect Options. Tab enter on, AutoCorrect Options 4. Click the AutoFormat As You Type tab. 5. In the Apply as you type section, un-check Automatic bulleted lists, then right arrow once and check Automatic numbered lists. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 5:26 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Ah, ok, Adrian. You may be right. When I get some time later tonight, I'll give things a try again, especially with regard to your latest suggestion, and will let you know how things turn out. I appreciate your and everyone's patience! Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 5:16 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I'm guessing you're missing a step in David's instructions. When you land on the bullets checkbox, don't tab. Instead, right arrow once. Then automatic numbering turns up. Not exactly intuitive, I agree. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 2:38 PM To: 'Jaws users list' Subject: [JAWS-Users] Stopping Autonumbering In Outlook 2016 continued Hello, everyone. I have tried the steps sent to me by Kimsan, David, and Joseph, and still can't get auto-numbering to be turned off in Outlook 2016 e-mails. I am not sure if this is a Jaws issue, because when I get to the auto-numbering as you type options, I can find auto-bulleting which I have unchecked, but can't find auto-numbering. Again, I must point out that I'm using Outlook 2016 with Office 365 and Windows 7 here. This is extremely frustrating, and should not be this difficult. Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] can you read me?
Gino, you should do this if you use an e-mail client like Thunderbird, Outlook, all variants, Outlook Express, now Windows Mail/Windows Live mail. You do not need to do this on the website if you check your mail via the internet. Scorpio -Original Message- From: Geno9802 Sent: Sunday, October 23, 2016 5:13 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? So Mike, curious me, do you do this, Me With Windows 7, Outlook office-E-mail and do I do this just in Outlook in the accounts on all three G-mail accounts and do I have to do it up on The G-mail site with my account there too? -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike B. Sent: Sunday, October 23, 2016 4:29 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] can you read me? Hi Andy, You can try the following in Gmail to see if this will get you a copy of your posts: Assuming you're using a standard e-mail client like Outlook Express or Outlook, open up the tools menu, then arrow down to accounts and press enter. Once in the dialog box, highlight your Gmail account, and tab to the properties button, and press the spacebar. You should be on the General Tab. Now, tab down to the e-mail address edit field. In that field, type the word recent with a colon before your e-mail address. So, if you're typing this information into your e-mail field, you would type in: recent:dwmaster...@gmail.com Tab down to the apply button, press the spacebar, then shift+tab back to the ok button and press the spacebar. You'll land back on the accounts dialog box, at which point, you tab to the close button, then press the spacebar again. The next time you send and receive your messages, you'll receive each and every message you ever sent via Gmail, so be prepared to get a flood of e-mails once you do this. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: REGilman To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 12:35 PM Subject: Re: [JAWS-Users] can you read me? Hi Andy, Last I knew is that if you were using a Gmail account you would not see your own messages. Thanks, Bob -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of andy Sent: Sunday, October 23, 2016 2:45 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] can you read me?
Unfortunately this is a bug in Gmail accounts. For some reason, when sending to an e-mail list, your messages don't come back. You must put the word "recent", without the quotes, followed by a colon, then your e-mail address when setting up your account with an email client. In other words, in your e-mail client, your username should look like this: recent:wellerandy1...@gmail.com Then your password would remain the same. Be prepared though, you'll receive every message you've sent thus far. Good luck. Scorpio -Original Message- From: Mike B. Sent: Sunday, October 23, 2016 3:17 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] can you read me? Hi Andy, Yessir, loud & clear. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: andy To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 11:44 AM Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued
Ah, ok, Adrian. You may be right. When I get some time later tonight, I'll give things a try again, especially with regard to your latest suggestion, and will let you know how things turn out. I appreciate your and everyone's patience! Tom Behler -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, October 23, 2016 5:16 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued Tom, I'm guessing you're missing a step in David's instructions. When you land on the bullets checkbox, don't tab. Instead, right arrow once. Then automatic numbering turns up. Not exactly intuitive, I agree. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 2:38 PM To: 'Jaws users list' Subject: [JAWS-Users] Stopping Autonumbering In Outlook 2016 continued Hello, everyone. I have tried the steps sent to me by Kimsan, David, and Joseph, and still can't get auto-numbering to be turned off in Outlook 2016 e-mails. I am not sure if this is a Jaws issue, because when I get to the auto-numbering as you type options, I can find auto-bulleting which I have unchecked, but can't find auto-numbering. Again, I must point out that I'm using Outlook 2016 with Office 365 and Windows 7 here. This is extremely frustrating, and should not be this difficult. Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Stopping Auto numbering In Outlook 2016 continued
Tom, I'm guessing you're missing a step in David's instructions. When you land on the bullets checkbox, don't tab. Instead, right arrow once. Then automatic numbering turns up. Not exactly intuitive, I agree. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Sunday, October 23, 2016 2:38 PM To: 'Jaws users list' Subject: [JAWS-Users] Stopping Autonumbering In Outlook 2016 continued Hello, everyone. I have tried the steps sent to me by Kimsan, David, and Joseph, and still can't get auto-numbering to be turned off in Outlook 2016 e-mails. I am not sure if this is a Jaws issue, because when I get to the auto-numbering as you type options, I can find auto-bulleting which I have unchecked, but can't find auto-numbering. Again, I must point out that I'm using Outlook 2016 with Office 365 and Windows 7 here. This is extremely frustrating, and should not be this difficult. Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] can you read me?
So Mike, curious me, do you do this, Me With Windows 7, Outlook office-E-mail and do I do this just in Outlook in the accounts on all three G-mail accounts and do I have to do it up on The G-mail site with my account there too? -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike B. Sent: Sunday, October 23, 2016 4:29 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] can you read me? Hi Andy, You can try the following in Gmail to see if this will get you a copy of your posts: Assuming you're using a standard e-mail client like Outlook Express or Outlook, open up the tools menu, then arrow down to accounts and press enter. Once in the dialog box, highlight your Gmail account, and tab to the properties button, and press the spacebar. You should be on the General Tab. Now, tab down to the e-mail address edit field. In that field, type the word recent with a colon before your e-mail address. So, if you're typing this information into your e-mail field, you would type in: recent:dwmaster...@gmail.com Tab down to the apply button, press the spacebar, then shift+tab back to the ok button and press the spacebar. You'll land back on the accounts dialog box, at which point, you tab to the close button, then press the spacebar again. The next time you send and receive your messages, you'll receive each and every message you ever sent via Gmail, so be prepared to get a flood of e-mails once you do this. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: REGilman To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 12:35 PM Subject: Re: [JAWS-Users] can you read me? Hi Andy, Last I knew is that if you were using a Gmail account you would not see your own messages. Thanks, Bob -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of andy Sent: Sunday, October 23, 2016 2:45 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] can you read me?
Hi Andy, You can try the following in Gmail to see if this will get you a copy of your posts: Assuming you're using a standard e-mail client like Outlook Express or Outlook, open up the tools menu, then arrow down to accounts and press enter. Once in the dialog box, highlight your Gmail account, and tab to the properties button, and press the spacebar. You should be on the General Tab. Now, tab down to the e-mail address edit field. In that field, type the word recent with a colon before your e-mail address. So, if you're typing this information into your e-mail field, you would type in: recent:dwmaster...@gmail.com Tab down to the apply button, press the spacebar, then shift+tab back to the ok button and press the spacebar. You'll land back on the accounts dialog box, at which point, you tab to the close button, then press the spacebar again. The next time you send and receive your messages, you'll receive each and every message you ever sent via Gmail, so be prepared to get a flood of e-mails once you do this. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: REGilman To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 12:35 PM Subject: Re: [JAWS-Users] can you read me? Hi Andy, Last I knew is that if you were using a Gmail account you would not see your own messages. Thanks, Bob -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of andy Sent: Sunday, October 23, 2016 2:45 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] can you read me?
Yes, loud and clear here too. You are like me guessing as Bob said Gmail account. I switched all three accounts from Road Runner as they won't play nice. Though kept one account that I don't use, a dummy account. For this group you won't get a copy. As well if you belong to the blind handy man list you won't either Gene/Geno in Portland, ME. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of andy Sent: Sunday, October 23, 2016 2:45 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] KeePass Help
Hello All, I've only recently decided to try KeePass located on the programs page of the JAWS-Users website. I am on a Windows 10 PC with JAWS 17. I did not find the application extremely intuitive but with some information found on the First Step Tutorial-KeePass website (http://keepass.info/help/base/firststeps.html), I made at least some headway. I was able to create new categories as well as new entries. It was at the time of saving the database that I was asked what to call it and where it should be save. Thus far, easy peazy. After closing and properly naming and saving, I tried to open the newly created KeePass database and this is where I ran into trouble: Windows asked which program should be used to open the database. I tried using a few different applications without success. Anyone have this issue with KeePass? Additionally, the tutorial states that I can right click the entry and choose from a list of options, but when I attempted to use the application key, no menu appeared. It can't be this difficult can it? I must be missing a step somewhere. Any and all help appreciated. Mauricio For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] can you read me?
Hi Andy, Last I knew is that if you were using a Gmail account you would not see your own messages. Thanks, Bob -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of andy Sent: Sunday, October 23, 2016 2:45 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] ANTI VIRUS PROGRAM WITH JAWS?
Hi Mike, I installed and activated Panda with no problem. Now my PC is protected. But, today when I tried to schedule a scan, I could not find the OK button. My daughter clicked on the OK for me, and now I have a weekly scheduled scan. I did not try very hard to find the OK button, but possibly it is not accessible. Originally I just setup the protection, but before today I never tried to scan the PC. I believe that due to the good protection of the Panda Free Antivirus, it is worth checking it and deciding if it accessible enough for you or not, especially if you have someone that can help you once to click on the OK button to schedule the scan (daily, weekly or monthly). Best wishes, Aran -Original Message- From: Mike B. Sent: Saturday, October 22, 2016 3:08 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] ANTI VIRUS PROGRAM WITH JAWS? Hi Aran, How Accessible is Panda with Jaws? Thanks much. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: Aran_A To: jaws-users-list@jaws-users.com Sent: Saturday, October 22, 2016 11:53 AM Subject: Re: [JAWS-Users] ANTI VIRUS PROGRAM WITH JAWS? Hi Donna, I am using Panda Free Antivirus. The Panda Free Antivirus is ranked very high and it is free... Best wishes! -Original Message- From: Donna Hardy Sent: Friday, October 21, 2016 11:04 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] ANTI VIRUS PROGRAM WITH JAWS? Hello, I just uninstalled webroot security from my desktop per great FS technical advice. It was not accessible for me and created havoc with jaws. I would appreciate recommendations and experiences with anti virus programs. Definitely need coverage. Thank you in advance. Donna I am using Panda Free Antivirus. The Panda Free Antivirus ranked very high, and it is free... Best wishes! For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] can you read me?
Hi Andy, Yessir, loud & clear. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: andy To: jaws-users-list@jaws-users.com Sent: Sunday, October 23, 2016 11:44 AM Subject: [JAWS-Users] can you read me? I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] can you read me?
I am new to the list and don't see my own messeges coming through.. can anyone read this messege? Thank you andy For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Stopping Autonumbering In Outlook 2016 continued
Hello, everyone. I have tried the steps sent to me by Kimsan, David, and Joseph, and still can't get auto-numbering to be turned off in Outlook 2016 e-mails. I am not sure if this is a Jaws issue, because when I get to the auto-numbering as you type options, I can find auto-bulleting which I have unchecked, but can't find auto-numbering. Again, I must point out that I'm using Outlook 2016 with Office 365 and Windows 7 here. This is extremely frustrating, and should not be this difficult. Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016
Brian, thank you for posting this useful addition to what you wrote earlier. It's important to know all the consequences of an action. Also, you've given us an on-the-fly solution, while David whitehead gave us the permanent one. It's good to have both. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Sunday, October 23, 2016 12:41 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016 Hello again Tom, One additional note to my last message is that when you switch to the normal style the cursor goes back to the left margin. In the list numbering style your lines are indented. If you want to write something that lines up with the text above but doesn't add a number in the list use Shift key with enter at the end of the numbered line. However, this keeps you in the same style so when you press enter again the numbering and indentation continues. Switching to normal style is a fast way to stop the numbering but remember lines are no longer indented automatically when using the normal style. Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Saturday, October 22, 2016 4:56 PM To: 'Jaws users list'Subject: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016 Hello, everyone. How exactly does one stop auto-numbering when composing e-mails with Outlook 2016? I used to be able to stop this feature in Outlook 2010 by simply hitting "enter" several times between list items, but this doesn't seem to work in Outlook 2016. It is very anoying, especially when auto-numbering is not desired! Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016
Brian: I think I'd like to turn auto-numbering off completely if possible. This way, I have complete control. I have a number of e-mails here with suggestions as to how to accomplish this, so will give them a try when I get the chance here. Thanks for your help, though. I really appreciate it. Dr. Tom Behler from Michigan -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Sunday, October 23, 2016 12:34 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016 Hello Tom, If you want to use the built-in auto numbering but you want numbering to stop after pressing enter key just change the style to normal. After pressing enter key and hearing the number you don't want press CTRL with Shift key and the letter N. This should remove the number on the line because you are switching from the list numbering style to the normal style. Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Saturday, October 22, 2016 4:56 PM To: 'Jaws users list'Subject: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016 Hello, everyone. How exactly does one stop auto-numbering when composing e-mails with Outlook 2016? I used to be able to stop this feature in Outlook 2010 by simply hitting "enter" several times between list items, but this doesn't seem to work in Outlook 2016. It is very anoying, especially when auto-numbering is not desired! Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016
Hello again Tom, One additional note to my last message is that when you switch to the normal style the cursor goes back to the left margin. In the list numbering style your lines are indented. If you want to write something that lines up with the text above but doesn't add a number in the list use Shift key with enter at the end of the numbered line. However, this keeps you in the same style so when you press enter again the numbering and indentation continues. Switching to normal style is a fast way to stop the numbering but remember lines are no longer indented automatically when using the normal style. Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Saturday, October 22, 2016 4:56 PM To: 'Jaws users list'Subject: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016 Hello, everyone. How exactly does one stop auto-numbering when composing e-mails with Outlook 2016? I used to be able to stop this feature in Outlook 2010 by simply hitting "enter" several times between list items, but this doesn't seem to work in Outlook 2016. It is very anoying, especially when auto-numbering is not desired! Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] virtual recorder
The sound card does not replace the microphone, rather, you would either use the built-in microphone or for better results, plug in an external microphone into the audio input jack of your computer. A USB microphone, (or headset), normally uses its own sound card instead of the computer sound card. I use a Plantronics headset with separate 3.5 mm plugs for headphones and microphone, with excellent results. Best, Humberto Humberto Rodriguez Fort White, Florida -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Kevin Sent: Sunday, October 23, 2016 11:09 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] virtual recorder How does virtual recorder work, I understand the program uses the sound card in place of a microphone as an audio input. but would I beable to use the recording feature of GoldWave or does virtual recorder have its own recording feature. I have a dell st 2421l intell audio sound card not sure if virtual recorder supports this. Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016
Hello Tom, If you want to use the built-in auto numbering but you want numbering to stop after pressing enter key just change the style to normal. After pressing enter key and hearing the number you don't want press CTRL with Shift key and the letter N. This should remove the number on the line because you are switching from the list numbering style to the normal style. Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Saturday, October 22, 2016 4:56 PM To: 'Jaws users list'Subject: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016 Hello, everyone. How exactly does one stop auto-numbering when composing e-mails with Outlook 2016? I used to be able to stop this feature in Outlook 2010 by simply hitting "enter" several times between list items, but this doesn't seem to work in Outlook 2016. It is very anoying, especially when auto-numbering is not desired! Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] virtual recorder
How does virtual recorder work, I understand the program uses the sound card in place of a microphone as an audio input. but would I beable to use the recording feature of GoldWave or does virtual recorder have its own recording feature. I have a dell st 2421l intell audio sound card not sure if virtual recorder supports this. Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] test email
For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] How do I stop jaws from saying errow keys
Hi Mike, thanks for replying, I wouldn't have do it without your help. Great, you understood me very good, basicly you were right, thank God, this verbosidty was driving me nuts. El 21/10/2016 a las 21:49, Mike B. escribió: Hi Again Lev, I think I found the setting to stop Jaws from saying, use arrow keys. Open your Jaws context menu / Options / Basics. When you open, Basics, you'll be in a list of 3 radio buttons: Tutor Messages: 1. Turn off Menu and Control Help. 2. Announce Menu and Control Help. 3. Announce Custom Messages Only Arrow / select # 3, tab to Okay & press enter. See if this helps. Take care. Mike Sent from my iBarstool. Go Dodgers! - Original Message - From: Lev To: jaws-users-list@jaws-users.com Sent: Friday, October 21, 2016 4:31 PM Subject: [JAWS-Users] How do I stop jaws from saying errow keys hi listers, ok, now my question is how do I stop jaws from saying "use errow keys" whatever I am on a tree view for example? I just can't find this particular setting. -- Hey, shout me louder on the streets. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ -- Hey, shout me louder on the streets. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016
Hello there; Give the following a try; 1. From the File tab, click Options. Alt+f=file, t=options, 2. Select Mail and click the Spelling and Autocorrect button. You can press letter "m"=mail, or, you can simply up-arrow, At this point do not press enter, Tab enter on, Spelling and Autocorrect button 3. In the Proofing section, click AutoCorrect Options. Tab enter on, AutoCorrect Options 4. Click the AutoFormat As You Type tab. 5. In the Apply as you type section, un-check Automatic bulleted lists and Automatic numbered lists. It is a little tricky here however this should provide you with the preferred result. Hope this helps. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Saturday, October 22, 2016 11:10 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016 Hi Tom, I do not know how to do this in 2016, but in 2010 Alt, H, U opens the bullets submenu and you would use your arrow keys to get to "None". I cannot remember the command for getting to the Numbers submenu, but in 2010 it is the item to the right of Bullets on the ribbon. Maybe someone can come up with the short cut. For some reason the short cut keys that are being announced when I check out my ribbon are not making sense. Another idea is to see if your applications key brings up a context menu that offers a choice for turning off the numbering. HTH, Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Saturday, October 22, 2016 10:34 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016 As I said in my previous note, I did this with no luck. If I hit enter twice, the auto-numbering continues. Don't understand why Microsoft feels that it has to dictate this aspect of composing e-mail! Dr. Tom Behler from Michigan -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of TheHangMan Sent: Saturday, October 22, 2016 8:37 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016 Hi, The only thing that came to mind was enter twice. HTH, Jorge -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Tom Behler Sent: Saturday, October 22, 2016 7:56 PM To: 'Jaws users list'Subject: [JAWS-Users] How To Stop Auto-numbering In Outlook 2016 Hello, everyone. How exactly does one stop auto-numbering when composing e-mails with Outlook 2016? I used to be able to stop this feature in Outlook 2010 by simply hitting "enter" several times between list items, but this doesn't seem to work in Outlook 2016. It is very anoying, especially when auto-numbering is not desired! Dr. Tom Behler from Michigan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/