[JAWS-Users] Outlook 2013 question
Hello, Would somebody please remind me how to create an email group using Outlook 2013 and Jaws 17? I did it in Outlook Express years ago and can't find what I need. Thank you so much! --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] system information
Hi Kevin, If you're using a standard / desktop keyboard, directly to the right of the, F12 key, are 3 keys. Print Screen, Scroll Lock, & Pause. They are above what's referred to as the 6 pack of keys located between the main keyboard & the Numpad. If you do as Joseph Lee suggests, route your Jaws cursor to the PC cursor & arrow down to read all the information, or you can virtualize the window to copy the info as I suggested earlier. Take care. Mike Sent from my iBarstool. - Original Message - From: Kevin To: jaws-users-list@jaws-users.com Sent: Saturday, January 14, 2017 5:48 PM Subject: Re: [JAWS-Users] system information Mike I don't know where or what the pause key is! -Original Message- From: Mike B. Sent: Saturday, January 14, 2017 5:26 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information Hi Kevin, Yes it is possible. Try the following: 1. Hold down the Windows Key, & press the, Pause key. This is a shortcut keystroke for opening System properties. 2. Press, Insert / Jaws key, Alt key, + W, to virtualize the window. 3. Press, Control + A, to copy everything to the clipboard. 4. Open Notepad, & press, Control + V, to paste the info. You might have to do a certain amount of editing, but all the information will be there. Take care. Mike Sent from my iBarstool. - Original Message - From: Kevin To: jaws-users-list@jaws-users.com Sent: Saturday, January 14, 2017 4:20 PM Subject: Re: [JAWS-Users] system information is it possible to copy that information and paste it to a note pad document . I would guess not since I need to use the jaws cursor! -Original Message- From: Maria Campbell Sent: Saturday, January 14, 2017 3:03 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information There are a few ways but one is to highlight your c drive, then press alt plus enter for properties then use your JAWS cursor to read the information. Maria Campbell luc...@gmail.com Love and compassion are necessities, not luxuries. Without them, humanity cannot survive. --Dalai Lama On 1/14/2017 4:56 PM, Kevin wrote: > how can I get my system information without installing a 3rd party app > like specsy > system info such as computer serial model, etc... > using hjaws 18 latest and windows 10 latest. > > Email is golden!!! > Kevin Lee > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] partition usb drive?
My grandson just received his 2tb usb drive. I want to help him make it into 3 virtual drives a 1tb and 2 more equal parts or close to it. I thought that windows 10 could accomplish this task but I was incorrect. It states that usb drives must use 3rd party software. I scanned through the programs list and did not see any free programs. He only wants to partition the drive one time. He asked if just making 3 main folders would work. I think it would but the 3 drives would be best. The 1tb for all of the downloads of the large steam games that he uses. and each of the other partitions to backup his new desktop and the 3rd to backup his college laptop. --- Please visit my web page It’s motivational, inspirational with a touch of humor There is also a very extensive resource list for the blind http://www.LennyMcHugh.com International Brotherhood of Magicians member #43990 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] system information
Hi, A much better (and perhaps a stable) way: press Windows+R, type "msinfo32" (without quotes), then press ENTER. Navigate through the list that appears which will tell you everything you need to know about your computer and your OS. Cheers, Joseph -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Kevin Sent: Saturday, January 14, 2017 5:48 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information Mike I don't know where or what the pause key is! -Original Message- From: Mike B. Sent: Saturday, January 14, 2017 5:26 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information Hi Kevin, Yes it is possible. Try the following: 1. Hold down the Windows Key, & press the, Pause key. This is a shortcut keystroke for opening System properties. 2. Press, Insert / Jaws key, Alt key, + W, to virtualize the window. 3. Press, Control + A, to copy everything to the clipboard. 4. Open Notepad, & press, Control + V, to paste the info. You might have to do a certain amount of editing, but all the information will be there. Take care. Mike Sent from my iBarstool. - Original Message - From: Kevin To: jaws-users-list@jaws-users.com Sent: Saturday, January 14, 2017 4:20 PM Subject: Re: [JAWS-Users] system information is it possible to copy that information and paste it to a note pad document . I would guess not since I need to use the jaws cursor! -Original Message- From: Maria Campbell Sent: Saturday, January 14, 2017 3:03 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information There are a few ways but one is to highlight your c drive, then press alt plus enter for properties then use your JAWS cursor to read the information. Maria Campbell luc...@gmail.com Love and compassion are necessities, not luxuries. Without them, humanity cannot survive. --Dalai Lama On 1/14/2017 4:56 PM, Kevin wrote: > how can I get my system information without installing a 3rd party app > like specsy system info such as computer serial model, etc... > using hjaws 18 latest and windows 10 latest. > > Email is golden!!! > Kevin Lee > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] system information
Mike I don't know where or what the pause key is! -Original Message- From: Mike B. Sent: Saturday, January 14, 2017 5:26 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information Hi Kevin, Yes it is possible. Try the following: 1. Hold down the Windows Key, & press the, Pause key. This is a shortcut keystroke for opening System properties. 2. Press, Insert / Jaws key, Alt key, + W, to virtualize the window. 3. Press, Control + A, to copy everything to the clipboard. 4. Open Notepad, & press, Control + V, to paste the info. You might have to do a certain amount of editing, but all the information will be there. Take care. Mike Sent from my iBarstool. - Original Message - From: Kevin To: jaws-users-list@jaws-users.com Sent: Saturday, January 14, 2017 4:20 PM Subject: Re: [JAWS-Users] system information is it possible to copy that information and paste it to a note pad document . I would guess not since I need to use the jaws cursor! -Original Message- From: Maria Campbell Sent: Saturday, January 14, 2017 3:03 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information There are a few ways but one is to highlight your c drive, then press alt plus enter for properties then use your JAWS cursor to read the information. Maria Campbell luc...@gmail.com Love and compassion are necessities, not luxuries. Without them, humanity cannot survive. --Dalai Lama On 1/14/2017 4:56 PM, Kevin wrote: how can I get my system information without installing a 3rd party app like specsy system info such as computer serial model, etc... using hjaws 18 latest and windows 10 latest. Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] system information
Simply hit the windows and pause keys at the same time from anywhere you happen to be at the time. -Original Message- From: Kevin Sent: Saturday, January 14, 2017 5:56 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] system information how can I get my system information without installing a 3rd party app like specsy system info such as computer serial model, etc... using hjaws 18 latest and windows 10 latest. Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] system information
Hi Kevin, Yes it is possible. Try the following: 1. Hold down the Windows Key, & press the, Pause key. This is a shortcut keystroke for opening System properties. 2. Press, Insert / Jaws key, Alt key, + W, to virtualize the window. 3. Press, Control + A, to copy everything to the clipboard. 4. Open Notepad, & press, Control + V, to paste the info. You might have to do a certain amount of editing, but all the information will be there. Take care. Mike Sent from my iBarstool. - Original Message - From: Kevin To: jaws-users-list@jaws-users.com Sent: Saturday, January 14, 2017 4:20 PM Subject: Re: [JAWS-Users] system information is it possible to copy that information and paste it to a note pad document . I would guess not since I need to use the jaws cursor! -Original Message- From: Maria Campbell Sent: Saturday, January 14, 2017 3:03 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information There are a few ways but one is to highlight your c drive, then press alt plus enter for properties then use your JAWS cursor to read the information. Maria Campbell luc...@gmail.com Love and compassion are necessities, not luxuries. Without them, humanity cannot survive. --Dalai Lama On 1/14/2017 4:56 PM, Kevin wrote: > how can I get my system information without installing a 3rd party app > like specsy > system info such as computer serial model, etc... > using hjaws 18 latest and windows 10 latest. > > Email is golden!!! > Kevin Lee > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] system information
Another way to get system info is to type system in the search box. However, when I did that I got the info but got JAWS acting erratic so had to shut down and restart JAWS. Maria Campbell luc...@gmail.com Love and compassion are necessities, not luxuries. Without them, humanity cannot survive. --Dalai Lama On 1/14/2017 6:20 PM, Kevin wrote: is it possible to copy that information and paste it to a note pad document . I would guess not since I need to use the jaws cursor! -Original Message- From: Maria Campbell Sent: Saturday, January 14, 2017 3:03 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information There are a few ways but one is to highlight your c drive, then press alt plus enter for properties then use your JAWS cursor to read the information. Maria Campbell luc...@gmail.com Love and compassion are necessities, not luxuries. Without them, humanity cannot survive. --Dalai Lama On 1/14/2017 4:56 PM, Kevin wrote: how can I get my system information without installing a 3rd party app like specsy system info such as computer serial model, etc... using hjaws 18 latest and windows 10 latest. Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] How to capture system information
You can get that text by using the JAWS layered keystrokes of JAWS key plus space bar, then h for the JAWS speech history buffer. You do this right after having read the information, regardless of whether in or out of review mode. Copy the string of text you want; I typically just press control a to select all, control C for copy, then paste into Word. I then edit that to have just the portions of text I want. Give it a try, it helps with all instances of wanting to capture something JAWS said, since the buffer includes JAWS prompts and messages. Tim Ford -Original Message- From: Kevin Sent: Saturday, January 14, 2017 4:20 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information is it possible to copy that information and paste it to a note pad document . I would guess not since I need to use the jaws cursor! -Original Message- From: Maria Campbell Sent: Saturday, January 14, 2017 3:03 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information There are a few ways but one is to highlight your c drive, then press alt plus enter for properties then use your JAWS cursor to read the information. Maria Campbell luc...@gmail.com Love and compassion are necessities, not luxuries. Without them, humanity cannot survive. --Dalai Lama On 1/14/2017 4:56 PM, Kevin wrote: how can I get my system information without installing a 3rd party app like specsy system info such as computer serial model, etc... using hjaws 18 latest and windows 10 latest. Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] system information
is it possible to copy that information and paste it to a note pad document . I would guess not since I need to use the jaws cursor! -Original Message- From: Maria Campbell Sent: Saturday, January 14, 2017 3:03 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] system information There are a few ways but one is to highlight your c drive, then press alt plus enter for properties then use your JAWS cursor to read the information. Maria Campbell luc...@gmail.com Love and compassion are necessities, not luxuries. Without them, humanity cannot survive. --Dalai Lama On 1/14/2017 4:56 PM, Kevin wrote: how can I get my system information without installing a 3rd party app like specsy system info such as computer serial model, etc... using hjaws 18 latest and windows 10 latest. Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] system information
There are a few ways but one is to highlight your c drive, then press alt plus enter for properties then use your JAWS cursor to read the information. Maria Campbell luc...@gmail.com Love and compassion are necessities, not luxuries. Without them, humanity cannot survive. --Dalai Lama On 1/14/2017 4:56 PM, Kevin wrote: how can I get my system information without installing a 3rd party app like specsy system info such as computer serial model, etc... using hjaws 18 latest and windows 10 latest. Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] system information
how can I get my system information without installing a 3rd party app like specsy system info such as computer serial model, etc... using hjaws 18 latest and windows 10 latest. Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Clipboard text keeps interfering with JAWS
Hi Adrian, After removing the ENU Files & replacing them, did you unload & restart Jaws? Also, what happens if you delete the contents of the clipboard? I just wonder if deleting the contents of the clipboard will stop the clipboard from showing / interfering with Jaws. Also, maybe someone will clear this up because I don't know if the Clipboard is a part of Windows Explorer, or the operating system, & Office & Outlook have commands to access it, or if the Clipboard is actually a part of the Office / Outlook program. Take care. Mike Sent from my iBarstool. - Original Message - From: Adrian Spratt To: jaws-users-list@jaws-users.com Sent: Saturday, January 14, 2017 1:02 PM Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS At the risk of trying everyone's patience, here's the next installment. This is the problem where JAWS verbalizes a clipboard, possibly the Office clipboard, when I open an Outlook 2010 message or start replying to a message. It all started after I experimented with the Office clipboard settings. As far as I can tell, disabling the Office clipboard doesn't solve the problem I'm having, which is that JAWS will verbalize clipboard contents when I open a new message. I could be wrong, but although I can't confirm when the clipboard is disabled, I've followed the steps to disable it. After a long talk with Mike B, I established one new fact and tried a new approach. The new fact is that Outlook works fine with JAWS 17. This surely confirms that the problem I'm having is with JAWS 18. Mike suggested I try removing certain files from my JAWS 18 ENU folder and replacing them with the same files from my JAWS 17 ENU folder. Other than an Outlook.jdf file, the only files that seemed relevant were Outlook.jcf and Word.jcf. I went ahead, removed them from the J18 ENU folder and replaced them with the J17 ENU equivalents. Unfortunately, the problem persists. (I've now restored the original two JCF files to my J18 ENU folder. Note that before doing all that, I copied both folders and clearly labeled them. I was super careful not to confuse the files. There were other steps in-between, but they didn't establish anything. So, can anyone suggest anything based on this new information? Could another ENU file possibly be involved? I haven't upgraded to the current JAWS 18 release. Might doing so solve the problem? I've already run repairs on both JAWS 18 and Office 2010. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Saturday, January 14, 2017 9:54 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS David, Yesterday I tried this dialog with NVDA and noticed that the control there (unlike with JAWS) is labeled "Show Office clipboard." That implies it's a toggle, and what you say here confirms it. Beyond that, NVDA wasn't helpful. >From what I've read, NVDA now supports Word 2013 and 2016, but not my 2010. So I just tried your method of determining when the control is disabled and enabled. I wasn't successful. However, I'll experiment by pressing enter on the control and working for a while, then going back and pressing enter again. I'll assume that either the first or second time, pressing enter disabled it. That way I should figure out if disabling is the answer. Once again, thanks for all your good advice to list members. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Whitehead Sent: Saturday, January 14, 2017 7:25 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Hello Adrian; Ok, I played with this a little, What I found was, you need to turn the office clipboard off, from word. 1, go into word, Now press alt+h=home Now, tab and enter on, office clipboard You will see that the clip board has been disabled. You can verify this by routing jaws to pc, you will not see the office clipboard if it's disabled. Hope this helps. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Friday, January 13, 2017 3:33 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Thanks, David. I found the same area in Outlook 2010, which I should have mentioned I'm using. I'd already unchecked every item in that list, and I just now went back in to double-check. Any more great ideas to pull out of your bag of many tricks? -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Whitehead Sent: Friday, January 13, 2017 11:15 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS - Turn the Microsoft Office 2016 or 2013 clipboard features
Re: [JAWS-Users] Clipboard text keeps interfering with JAWS
At the risk of trying everyone's patience, here's the next installment. This is the problem where JAWS verbalizes a clipboard, possibly the Office clipboard, when I open an Outlook 2010 message or start replying to a message. It all started after I experimented with the Office clipboard settings. As far as I can tell, disabling the Office clipboard doesn't solve the problem I'm having, which is that JAWS will verbalize clipboard contents when I open a new message. I could be wrong, but although I can't confirm when the clipboard is disabled, I've followed the steps to disable it. After a long talk with Mike B, I established one new fact and tried a new approach. The new fact is that Outlook works fine with JAWS 17. This surely confirms that the problem I'm having is with JAWS 18. Mike suggested I try removing certain files from my JAWS 18 ENU folder and replacing them with the same files from my JAWS 17 ENU folder. Other than an Outlook.jdf file, the only files that seemed relevant were Outlook.jcf and Word.jcf. I went ahead, removed them from the J18 ENU folder and replaced them with the J17 ENU equivalents. Unfortunately, the problem persists. (I've now restored the original two JCF files to my J18 ENU folder. Note that before doing all that, I copied both folders and clearly labeled them. I was super careful not to confuse the files. There were other steps in-between, but they didn't establish anything. So, can anyone suggest anything based on this new information? Could another ENU file possibly be involved? I haven't upgraded to the current JAWS 18 release. Might doing so solve the problem? I've already run repairs on both JAWS 18 and Office 2010. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Saturday, January 14, 2017 9:54 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS David, Yesterday I tried this dialog with NVDA and noticed that the control there (unlike with JAWS) is labeled "Show Office clipboard." That implies it's a toggle, and what you say here confirms it. Beyond that, NVDA wasn't helpful. From what I've read, NVDA now supports Word 2013 and 2016, but not my 2010. So I just tried your method of determining when the control is disabled and enabled. I wasn't successful. However, I'll experiment by pressing enter on the control and working for a while, then going back and pressing enter again. I'll assume that either the first or second time, pressing enter disabled it. That way I should figure out if disabling is the answer. Once again, thanks for all your good advice to list members. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Whitehead Sent: Saturday, January 14, 2017 7:25 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Hello Adrian; Ok, I played with this a little, What I found was, you need to turn the office clipboard off, from word. 1, go into word, Now press alt+h=home Now, tab and enter on, office clipboard You will see that the clip board has been disabled. You can verify this by routing jaws to pc, you will not see the office clipboard if it's disabled. Hope this helps. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Friday, January 13, 2017 3:33 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Thanks, David. I found the same area in Outlook 2010, which I should have mentioned I'm using. I'd already unchecked every item in that list, and I just now went back in to double-check. Any more great ideas to pull out of your bag of many tricks? -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Whitehead Sent: Friday, January 13, 2017 11:15 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS - Turn the Microsoft Office 2016 or 2013 clipboard features on or off using these easy steps. In Excel, Word or Powerpoint, select the "Home" tab. Select the arrow next to "Office Clipboard". Select "Options" at the bottom-left of the window. Select or deselect options as desired: -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Friday, January 13, 2017 10:10 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Is this the same as a system restore? If so, I've made too many changes to my system since this problem began. If it's something else, please let me know. Obviously, I'm not familiar with what that would be. -Original Message- From: JAWS-Users-List
[JAWS-Users] jaws 18 and outlook 2016 not getting a long.
Hi all. Running windows 10 outlook 2016 and jfw 18 latest build. For some reason jaws and outlook 2016 keeps crashing when trying to switch folders. I had just did a fresh install of windows 10 afrtter my install had a mager melt down. Any how any idea why this might be happening? This a fresh install of office. Any other outlook users having this? Thanks it is driving me crazy. Matthew For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Clipboard text keeps interfering with JAWS
David, Yesterday I tried this dialog with NVDA and noticed that the control there (unlike with JAWS) is labeled "Show Office clipboard." That implies it's a toggle, and what you say here confirms it. Beyond that, NVDA wasn't helpful. From what I've read, NVDA now supports Word 2013 and 2016, but not my 2010. So I just tried your method of determining when the control is disabled and enabled. I wasn't successful. However, I'll experiment by pressing enter on the control and working for a while, then going back and pressing enter again. I'll assume that either the first or second time, pressing enter disabled it. That way I should figure out if disabling is the answer. Once again, thanks for all your good advice to list members. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Whitehead Sent: Saturday, January 14, 2017 7:25 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Hello Adrian; Ok, I played with this a little, What I found was, you need to turn the office clipboard off, from word. 1, go into word, Now press alt+h=home Now, tab and enter on, office clipboard You will see that the clip board has been disabled. You can verify this by routing jaws to pc, you will not see the office clipboard if it's disabled. Hope this helps. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Friday, January 13, 2017 3:33 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Thanks, David. I found the same area in Outlook 2010, which I should have mentioned I'm using. I'd already unchecked every item in that list, and I just now went back in to double-check. Any more great ideas to pull out of your bag of many tricks? -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Whitehead Sent: Friday, January 13, 2017 11:15 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS - Turn the Microsoft Office 2016 or 2013 clipboard features on or off using these easy steps. In Excel, Word or Powerpoint, select the "Home" tab. Select the arrow next to "Office Clipboard". Select "Options" at the bottom-left of the window. Select or deselect options as desired: -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Friday, January 13, 2017 10:10 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Is this the same as a system restore? If so, I've made too many changes to my system since this problem began. If it's something else, please let me know. Obviously, I'm not familiar with what that would be. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Subash Sent: Friday, January 13, 2017 9:28 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Hi Adrian Do you think a windows restore might work? Computers are weird at times. :-) -Original Message- From: Adrian Spratt Sent: Thursday, January 12, 2017 10:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Thanks, Annette, but I'm afraid your post shows it doesn't work. I opened your message and the clipboard text came up. I tried to refresh with insert-escape, but the clipboard didn't go away. I had to do the alt-enter dos- à-dos again. Any other thoughts? This is very distracting. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Thursday, January 12, 2017 8:22 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS I wonder if refreshing the screen with Insert+Escape will help. Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Thursday, January 12, 2017 6:38 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Clipboard text keeps interfering with JAWS Ever since I experimented with the Office keyboard, JAWS keeps verbalizing the clipboard's content everywhere I go. Say I open an email and set it up for reply, I leave the message, return to the edit field, and all JAWS will do is read the clipboard. The workaround is to alt-enter out of the email and alt-enter back in, although who knows why that works. However, it's a nuisance, and it happens in other contexts as well, interfering with my work. This afternoon I did a JAWS repair, but it made no difference. I've unchecked every item in the Office clipboard dialog. Again, no
Re: [JAWS-Users] Clipboard text keeps interfering with JAWS
Hello Adrian; Ok, I played with this a little, What I found was, you need to turn the office clipboard off, from word. 1, go into word, Now press alt+h=home Now, tab and enter on, office clipboard You will see that the clip board has been disabled. You can verify this by routing jaws to pc, you will not see the office clipboard if it's disabled. Hope this helps. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Friday, January 13, 2017 3:33 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Thanks, David. I found the same area in Outlook 2010, which I should have mentioned I'm using. I'd already unchecked every item in that list, and I just now went back in to double-check. Any more great ideas to pull out of your bag of many tricks? -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Whitehead Sent: Friday, January 13, 2017 11:15 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS - Turn the Microsoft Office 2016 or 2013 clipboard features on or off using these easy steps. In Excel, Word or Powerpoint, select the "Home" tab. Select the arrow next to "Office Clipboard". Select "Options" at the bottom-left of the window. Select or deselect options as desired: -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Friday, January 13, 2017 10:10 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Is this the same as a system restore? If so, I've made too many changes to my system since this problem began. If it's something else, please let me know. Obviously, I'm not familiar with what that would be. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Subash Sent: Friday, January 13, 2017 9:28 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Hi Adrian Do you think a windows restore might work? Computers are weird at times. :-) -Original Message- From: Adrian Spratt Sent: Thursday, January 12, 2017 10:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Thanks, Annette, but I'm afraid your post shows it doesn't work. I opened your message and the clipboard text came up. I tried to refresh with insert-escape, but the clipboard didn't go away. I had to do the alt-enter dos- à-dos again. Any other thoughts? This is very distracting. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Thursday, January 12, 2017 8:22 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS I wonder if refreshing the screen with Insert+Escape will help. Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Thursday, January 12, 2017 6:38 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Clipboard text keeps interfering with JAWS Ever since I experimented with the Office keyboard, JAWS keeps verbalizing the clipboard's content everywhere I go. Say I open an email and set it up for reply, I leave the message, return to the edit field, and all JAWS will do is read the clipboard. The workaround is to alt-enter out of the email and alt-enter back in, although who knows why that works. However, it's a nuisance, and it happens in other contexts as well, interfering with my work. This afternoon I did a JAWS repair, but it made no difference. I've unchecked every item in the Office clipboard dialog. Again, no difference. Any ideas? For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Clipboard text keeps interfering with JAWS
Hi Adrian, Well, what I would do is, Go into word, and uncheck the same boxes, Perhaps this may help to solve the issue. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Friday, January 13, 2017 3:33 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Thanks, David. I found the same area in Outlook 2010, which I should have mentioned I'm using. I'd already unchecked every item in that list, and I just now went back in to double-check. Any more great ideas to pull out of your bag of many tricks? -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Whitehead Sent: Friday, January 13, 2017 11:15 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS - Turn the Microsoft Office 2016 or 2013 clipboard features on or off using these easy steps. In Excel, Word or Powerpoint, select the "Home" tab. Select the arrow next to "Office Clipboard". Select "Options" at the bottom-left of the window. Select or deselect options as desired: -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Friday, January 13, 2017 10:10 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Is this the same as a system restore? If so, I've made too many changes to my system since this problem began. If it's something else, please let me know. Obviously, I'm not familiar with what that would be. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Subash Sent: Friday, January 13, 2017 9:28 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Hi Adrian Do you think a windows restore might work? Computers are weird at times. :-) -Original Message- From: Adrian Spratt Sent: Thursday, January 12, 2017 10:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS Thanks, Annette, but I'm afraid your post shows it doesn't work. I opened your message and the clipboard text came up. I tried to refresh with insert-escape, but the clipboard didn't go away. I had to do the alt-enter dos- à-dos again. Any other thoughts? This is very distracting. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Thursday, January 12, 2017 8:22 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Clipboard text keeps interfering with JAWS I wonder if refreshing the screen with Insert+Escape will help. Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Thursday, January 12, 2017 6:38 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Clipboard text keeps interfering with JAWS Ever since I experimented with the Office keyboard, JAWS keeps verbalizing the clipboard's content everywhere I go. Say I open an email and set it up for reply, I leave the message, return to the edit field, and all JAWS will do is read the clipboard. The workaround is to alt-enter out of the email and alt-enter back in, although who knows why that works. However, it's a nuisance, and it happens in other contexts as well, interfering with my work. This afternoon I did a JAWS repair, but it made no difference. I've unchecked every item in the Office clipboard dialog. Again, no difference. Any ideas? For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
