Re: Intel xeon fails to boot with 4.1 release
Hi Chris, Thanks! What kind of an issue was it? You just had to increase the VM_PHYSSEG_MAX definition, or was that a misdirection? Austin BTW, way, how long does it take for such patches to show up in either the 4.1 or patch branch corrections lists on the web site? Austin On Sat, 30 Jun 2007, Chris Kuethe wrote: On 6/29/07, Austin Hook [EMAIL PROTECTED] wrote: Trying to set up a fairly heavy duty web server I encountered boot problems with this fairly new machine using the release CD ROM. Using the -c command at the boot prompt I already see error messages, before it gives me the UKC ... UVM_PAGE_PHYSLOAD: unable to load physical memory segment 5 segments allocated, ignoring 0x7fa9a - 0x7fad0 Increase VM_PHYSSEG_MAX and repeats this two more times for ranges like: 0x7fb1a - 0x7fb2c I just committed a patch to 4.0-stable and 4.1-stable which may help. CK -- GDB has a 'break' feature; why doesn't it have 'fix' too?
Re: HP proliant DL140-G3 install problems
On Tue, Jul 03, 2007 at 04:18:35PM +0100, Doros Eracledes wrote: I am trying to install 4.1 amd64 on a proliant DL140-G3 server and have various problems. I've found on previous postings that the axe and uberry driver are causing a problem and the kernel fails to load. What I've done until now is to install openbsd 4.1 on another machine update and recompile the kernel after removing the following options from it: same thing on the DL145-G3 (the opteron version). there is something wrong with the usb attach code, i started looking into this but i didn't fix it yet. you don't have to recompile the kernel, just boot into UKC and type disable axe ... you can also modify the kernel image without recompiling it by running config -f -e bsd.rd from a system running the same arch. see the manpages boot_config(8), boot(8), and config(8) #uberry* at uhub?# Research In Motion Blackberry #axe* at uhub?# ASIX Electronics AX88172 USB Ethernet #pckbc0 at isa? # PC keyboard controller #pckbd* at pckbc? # PC keyboard #pms* at pckbc? # PS/2 mouse for wsmouse #pmsi*at pckbc? # PS/2 Intellimouse for wsmouse After removing the ps2 keyboard and mouse controller from the kernel machine boots normally and keyboard and mouse is detected (seems like there is a USB to PS2 bridge). PS2 keyboard and mouse would make the machine to take very long time to boot (trying to initialize keyboard controller) i386 install shows up the same behaviour. I've tried the above using a 4.1-current install and now I need to try the same with 4.1-stable. Is it possible that we get patches to allow 4.1-stable install CD to be able to install directly on the DL140-G3 machine? see above, use config(8) reyk Here is an 4.1-current (i386) dmesg: OpenBSD 4.1-current (TEL) #7: Mon Jul 2 20:21:22 EEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/TELXXX ^^^ FOR PORN? cpu0: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz (GenuineIntel 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2 ,CX16,xTPR real mem = 2146050048 (2095752K) avail mem = 1844817920 (1801580K) using 4278 buffers containing 214855680 bytes (209820K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfd361, SMBIOS rev. 2.31 @ 0xdc010 (57 entries) bios0: HP ProLiant DL140 G3 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xfd360/0xca0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdde0/512 (30 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82371FB ISA rev 0x00) pcibios0: PCI bus #16 is the last bus bios0: ROM list: 0xc/0x8000 0xc8000/0x1000 0xc9000/0x1600 0xca800/0x1600 0xdc000/0x4000! acpi at mainbus0 not configured mainbus0: Intel MP Specification (Version 1.4) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 265 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz (GenuineIntel 686-class) 1.60 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2 ,CX16,xTPR cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz (GenuineIntel 686-class) 1.60 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2 ,CX16,xTPR cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz (GenuineIntel 686-class) 1.60 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2 ,CX16,xTPR mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type PCI mainbus0: bus 14 is type PCI mainbus0: bus 15 is type PCI mainbus0: bus 16 is type PCI mainbus0: bus 17 is type ISA ioapic0 at mainbus0: apid 4 pa 0xfec0, version 20, 24 pins ioapic1 at mainbus0: apid 5 pa 0xfec8, version 20, 24 pins pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 5000X Host rev 0x31 ppb0 at pci0 dev 2 function 0 Intel 5000 PCIE rev 0x31 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci3 at ppb2 bus 3 ppb3 at pci1 dev 0 function 3 Intel 6321ESB PCIE-PCIX rev 0x01 pci4 at ppb3 bus 5 ppb4 at pci0 dev 3 function 0 Intel 5000 PCIE rev 0x31 pci5 at ppb4 bus 6 ppb5 at pci0 dev 4 function 0 Intel
Re: kerberos - incorrect net address
My previous message was probably a bit dense, so I'll try my best to get right to the point. kerberos kinit was failing, giving me the error incorrect net address The kdc.log file indicated that the request was coming from ::1 (the IPv6 loopback, is that right?) After much looking, I found that I could get it to succeed with just one change: I changed my /etc/hosts file, so it read only: 10.0.1.202 auth.my.realm auth ::1 auth.my.realm auth (so that 10.0.1.202 was first, instead of ::1) kinit then succeeded My questions are: It works, but I'm betting it's not the 'right thing to do' so, what is? Where else should I look? I'm trying to understand how kinit came up with ::1, so that maybe I can figure out the 'right way to fix it' (I'm not a developer, but) I'm guessing since kinit needs to get a default IP address, it first gets a hostname (maybe gethostbyname() or something like it) and then does some sort of lookup from hostname to address (maybe res_query() or something like it) I'm guessing that the hostname to address is the problem, would this explain why changing /etc/hosts worked? Thanks
Re: Intel xeon fails to boot with 4.1 release
On 7/3/07, Austin Hook [EMAIL PROTECTED] wrote: Hi Chris, Thanks! What kind of an issue was it? You just had to increase the VM_PHYSSEG_MAX definition, or was that a misdirection? Just had to increase VM_PHYSSEG_MAX. BTW, way, how long does it take for such patches to show up in either the 4.1 or patch branch corrections lists on the web site? That's a manual process to put patches and errata up. It wasn't clear that we needed to actually issue a separate patch for this, since we haven't heard of very many machines being affected by this... only two reported machines so far that need more than 5 segments. CK -- GDB has a 'break' feature; why doesn't it have 'fix' too?
Changing IO or memory value
Does anone have idea how to put certain value to a certain IO location from operating system. Is there some kind of debug or something? I need to read IO location 0x09030, change and then write it back. Leon Komlosi
Re: Changing IO or memory value
On Tue, Jul 03, 2007 at 09:06:29PM +0200, Leon Komlo?i wrote: | Does anone have idea how to put certain value to a certain IO location | from operating system. Is there some kind of debug or something? | | I need to read IO location 0x09030, change and then write it back. I don't know of a portable way to do this, but if you're on i386, you may find i386_get_ioperm(2) useful. Cheers, Paul 'WEiRD' de Weerd -- [++-]+++.+++[---].+++[+ +++-].++[-]+.--.[-] http://www.weirdnet.nl/ [demime 1.01d removed an attachment of type application/pgp-signature]
Re: trunk, carp
Reyk Floeter wrote: On Tue, Jul 03, 2007 at 03:57:20PM +0200, Fredrik Carlsson wrote: Hi again, My setup looks like this: [em0, em1]-trunk0 - vlan2 - carp2 [em2, em3]-trunk1 - vlan104 - carp104 If don't use carp at all everything works fine, but when i add carp to trunk0 and trunk1 it takes a few seconds and the box hangs and a poweroff reboot is needed. can you show the command sequence you are using? what openbsd release are you using, can you send a dmesg? please try to get some more details, try to find a way to reproduce it. use the list [EMAIL PROTECTED] for bug reports or open a pr with sendbug(1) (see the manpage for details). If only one carp device exists the machine works but as soon as i add two it hangs. Even if I made some config error the machine should not hang. trunk0: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:48 trunk: trunkproto failover trunkport em1 active trunkport em0 master,active groups: trunk media: Ethernet autoselect status: active inet6 fe80::20e:cff:fedb:3f48%trunk0 prefixlen 64 scopeid 0xa trunk1: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:4a trunk: trunkproto failover trunkport em3 active trunkport em2 master,active groups: trunk media: Ethernet autoselect status: active inet6 fe80::20e:cff:fedb:3f4a%trunk1 prefixlen 64 scopeid 0xb vlan1: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:48 vlan: 1 priority: 0 parent interface: trunk0 groups: vlan inet6 fe80::20e:cff:fedb:3f48%vlan1 prefixlen 64 scopeid 0xc vlan2: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:4a vlan: 2 priority: 0 parent interface: trunk1 groups: vlan inet6 fe80::20e:cff:fedb:3f4a%vlan2 prefixlen 64 scopeid 0xe carp1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:00:5e:00:01:01 carp: MASTER carpdev vlan1 vhid 1 advbase 1 advskew 0 groups: carp inet6 fe80::200:5eff:fe00:101%carp1 prefixlen 64 scopeid 0x16 inet 10.10.1.17 netmask 0xfff0 broadcast 10.10.1.31 carp2: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:00:5e:00:01:01 carp: MASTER carpdev vlan2 vhid 1 advbase 1 advskew 0 groups: carp inet6 fe80::200:5eff:fe00:101%carp2 prefixlen 64 scopeid 0x17 inet 10.10.1.33 netmask 0xfff0 broadcast 10.10.1.47 // Fredrik I was not able to use sendbug, but i copied the information and sent it to [EMAIL PROTECTED] Any ideas what could cause my problem? // Fredrik
Re: Setting up a virtual hosting machine w. SSH/SFTP accounts - pitfalls/experiences?
You don't want user 1's web applications to be able to access data in user 2's web application storage space. I will only be using mod_php. In the past, without the user shell accounts, this has worked rather well for me in combination with the open_base_dir directive in the VirtualHost. This binds PHP's abilities to the specified directory (or directories) for that specific virtual host. Am I overlooking something with that setup? I get the impression from your reply this might be rather unsafe? A timely note: http://www.theregister.co.uk/2007/07/03/mpack_reloaded/ 'SANS Institute researchers conclude. Check if your hosting company uses chroot and/or suExec because that is the only way to make sure that your own web site will not be compromised by other users sharing the same physical server.'
Re: Soekris net5501 IPsec performance?
Christian Weisgerber [EMAIL PROTECTED] wrote: As reported ad nauseum, the vpn1411 doesn't work reliably in earlier Soekrises. Whether this still applies to the net5501 is a valid question. The only common piece between the 4501 and the 4801 was the ethernet chip. Everything else was different. The 5501 is totally different from either of the older models. Freebsd seems to think they have some significant driver improvements for speed and stability. Or, well, the story goes that hifn hired somebody to write a driver for freebsd and linux. Presumably they gave this person access to chip engineers to work out various issues. Chris
Access Control Mechanism (DAC x MAC)
Hi all, Having Read about computer security, one of the parts that mostly called up my atention were the access control mechanisms. I've found out that the mechanism used by mostly of the Unix-like systems is DAC (Discretionary Access Control) and as I could see OpenBSD fits in that mechanism as well. But the literature says that there is a more sophisticated mechanism, called MAC (Mandatory Access Control). In my studies, all the papers I have read explain that MAC is much more sophiscitated that DAC. Thus I would like to know from you why OpenBSD does not implement this type of mechanism. Thanks.
Re: HP proliant DL140-G3 install problems
On Tue, Jul 03, 2007 at 06:26:42PM +0200, Reyk Floeter wrote: On Tue, Jul 03, 2007 at 04:18:35PM +0100, Doros Eracledes wrote: I am trying to install 4.1 amd64 on a proliant DL140-G3 server and have various problems. I've found on previous postings that the axe and uberry driver are causing a problem and the kernel fails to load. What I've done until now is to install openbsd 4.1 on another machine update and recompile the kernel after removing the following options from it: same thing on the DL145-G3 (the opteron version). there is something wrong with the usb attach code, i started looking into this but i didn't fix it yet. This was fixed two months ago by miod in -current. http://marc.info/?l=openbsd-cvsm=117760690012315w=2
Re: Access Control Mechanism (DAC x MAC)
Joco Salvatti wrote: Hi all, Having Read about computer security, one of the parts that mostly called up my atention were the access control mechanisms. I've found out that the mechanism used by mostly of the Unix-like systems is DAC (Discretionary Access Control) and as I could see OpenBSD fits in that mechanism as well. But the literature says that there is a more sophisticated mechanism, called MAC (Mandatory Access Control). In my studies, all the papers I have read explain that MAC is much more sophiscitated that DAC. Thus I would like to know from you why OpenBSD does not implement this type of mechanism. if you've ever played the mortal combat games, this post conjures to mind the sound that occurs immediately prior to a fatality... Thanks.
Re: Access Control Mechanism (DAC x MAC)
On Tue, 3 Jul 2007 22:32:01 -0300, Joco Salvatti wrote: Hi all, Having Read about computer security, one of the parts that mostly called up my atention were the access control mechanisms. I've found out that the mechanism used by mostly of the Unix-like systems is DAC (Discretionary Access Control) and as I could see OpenBSD fits in that mechanism as well. But the literature says that there is a more sophisticated mechanism, called MAC (Mandatory Access Control). In my studies, all the papers I have read explain that MAC is much more sophiscitated that DAC. Thus I would like to know from you why OpenBSD does not implement this type of mechanism. Thanks. STFA! or JFGI! About the third or fourth hit will tell you. Doing your own research before asking here is strongly recommended. Rod/ From the land down under: Australia. Do we look umop apisdn from up over?
Re: sensorsd says the sensor is within limit, but it's not...
On 03/07/07, Per-Olov Sjvholm [EMAIL PROTECTED] wrote:
Hi Misc
I am probably missing something, but what..
sensorsd says in the syslog that the sensor is within limits even though
a sysctl -a|grep sensor shows that it is not.
Are there any known bugs? I have checked the list and cannot find anything
related to this... I run a Dell PE830 on OpenBSD 4.0 stable (latest update
in
May 25:th). I have these sensors which appears to always show the correct
values running a sysctl -a|grep sensor.
hw.sensors.0=ipmi0, Temp, 43.00 degC, OK
hw.sensors.1=ipmi0, Planar Temp, 38.00 degC, OK
hw.sensors.2=ipmi0, CMOS Battery, 3.13 V DC, OK
hw.sensors.3=ipmi0, Back Fan, 2204 RPM, OK
hw.sensors.4=ipmi0, Intrusion, Off, OK
hw.sensors.5=ami0, sd0, drive online, OK
From sensords.conf
hw.sensors.0:high=42C:command=/bin/echo test test|/usr/bin/mailx -s
Sensor
warning: CPU temp over %2 bla bla bla MYEMAIL
hw.sensors.1:high=39C:command=/bin/echo test test|/usr/bin/mailx -s
Sensor
warning: Chassie temp over %2 bla bla bla MYEMAIL
Starting sensorsd and look at /var/log/daemon
Jul 3 16:12:22 xanadu sensorsd[14634]: hw.sensors.0: within limits, value:
43.00 degC
Jul 3 16:12:22 xanadu sensorsd[14634]: hw.sensors.1: within limits, value:
38.00 degC
I assume I receive no reports as the daemon say the sensor wrongly is
within
the limits
Please, check the manual page for your system [0], specifically, the
following:
Sensors that provide status (such as from bio(4), esm(4), or ipmi(4)) do
not require boundary values specified (that otherwise will be ignored)
and simply trigger on status transitions.
In other words, for those sensors that provide the status themselves,
the keywords high and low in sensorsd.conf have no effect. This
limitation was removed at c2k7 [1], and the newest sensorsd in OpenBSD
4.1-current allows you to set your own limits for any sensor, and
ignore the status that the sensor device itself provides.
So if you need this functionality, you may wish to upgrade to OpenBSD
4.1-current.
Alternatively, you may upgrade to OpenBSD 4.1-stable that has the new
two-level sensor framework, and then manually update sensorsd to
4.1-current (files /usr/src/{etc/sensorsd.conf,usr.sbin/sensorsd/*}),
compiling and installing it afterwards -- sensorsd in 4.1-current as
of today is source-code-compatible with 4.1-stable (note that it is
not binary compatible). However, please be warned that mixing
4.1-stable and 4.1-current is not officially supported, so use it at
your own risk! (Even though it works for me in this specific case with
sensorsd.)
Cheers,
Constantine. :)
[0]
http://www.openbsd.org/cgi-bin/man.cgi?query=sensorsd.confsektion=5manpath=
OpenBSD+4.0
[1]
http://www.openbsd.org/cgi-bin/cvsweb/src/usr.sbin/sensorsd/sensorsd.c#rev1.3
2
Re: Access Control Mechanism (DAC x MAC)
Joco Salvatti wrote: MAC is much more sophiscitated that DAC. Thus I would like to know from you why OpenBSD does not implement this type of mechanism. More sophisticated != better. The longer answer is in the archives. --- Lars Hansson
Re: Access Control Mechanism (DAC x MAC)
Having Read about computer security, one of the parts that mostly called up my atention were the access control mechanisms. I've found out that the mechanism used by mostly of the Unix-like systems is DAC (Discretionary Access Control) and as I could see OpenBSD fits in that mechanism as well. But the literature says that there is a more sophisticated mechanism, called MAC (Mandatory Access Control). In my studies, all the papers I have read explain that MAC is much more sophiscitated that DAC. Thus I would like to know from you why OpenBSD does not implement this type of mechanism. Because it is dumb, and due to it's complexity it impliments a serious systems lifetime trap for system administrators --- most of who are not much smarter than a sack of hammers (excluding those of you reading this, of course). Look, complexity does not avert risk. Ever. Period.
PacSec 2007 Call For Papers (Nov. 29/30, deadline July 27)
PacSec CALL FOR PAPERS World Security Pros To Converge on Japan TOKYO, Japan -- To address the increasing importance of information security in Japan, the best known figures in the international security industry will get together with leading Japanese researchers to share best practices and technology. The most significant new discoveries about computer network hack attacks will be presented at the fifth annual PacSec conference to be discussed. The PacSec meeting provides an opportunity for foreign specialists to be exposed to Japanese innovation and markets and collaborate on practical solutions to computer security issues. In a relaxed setting with a mixture of material bilingually translated in both English and Japanese the eminent technologists can socialize and attend training sessions. Announcing the opportunity to submit papers for the PacSec 2007 network security training conference. The conference will be held November 29-30th in Tokyo. The conference focuses on emerging information security tutorials - it will be a bridge between the international and Japanese information security technology communities.. Please make your paper proposal submissions before July 27th, 2007. Slides for the papers must be submitted by October 1st 2007. The conference is November 29th and 30th 2007, presenters need to be available in the days before to meet with interpreters. A some invited papers have been confirmed, but a limited number of speaking slots are still available. The conference is responsible for travel and accomodations for the speakers. If you have a proposal for a tutorial session then please email a synopsis of the material and your biography, papers and, speaking background to secwest07 [at] pacsec.jp . Tutorials are one hour in length, but with simultaneous translation should be approximately 45 minutes in English, or Japanese. Only slides will be needed for the October paper deadline, full text does not have to be submitted. The PacSec conference consists of tutorials on technical details about current issues, innovative techniques and best practices in the information security realm. The audiences are a multi-national mix of professionals involved on a daily basis with security work: security product vendors, programmers, security officers, and network administrators. We give preference to technical details and education for a technical audience. The conference itself is a single track series of presentations in a lecture theater environment. The presentations offer speakers the opportunity to showcase on-going research and collaborate with peers while educating and highlighting advancements in security products and techniques. The focus is on innovation, tutorials, and education instead of product pitches. Some commercial content is tolerated, but it needs to be backed up by a technical presenter - either giving a valuable tutorial and best practices instruction or detailing significant new technology in the products. Paper proposals should consist of the following information: 1) Presenter, and geographical location (country of origin/passport) and contact info (e-mail, postal address, phone, fax). 2) Employer and/or affiliations. 3) Brief biography, list of publications and papers. 4) Any significant presentation and educational experience/background. 5) Topic synopsis, Proposed paper title, and a one paragraph description. 6) Reason why this material is innovative or significant or an important tutorial. 7) Where else has this material been presented or submitted? 8) Optionally, any samples of prepared material or outlines ready. Please forward the above information to secwest07 [at] pacsec.jp to be considered for placement on the speaker roster. cheers, --dr P.s. Some other dates of interest are announced: CanSecWest 2008 March 19-21 see http://cansecwest.com EUSecWest 2008 May 21/22 see http://eusecwest P.P.S. Also as a friendly reminder, CCC Camp is Aug 8 -12 2008, see http://events.ccc.de/camp/2007/Intro (Hi Julia et al...) Happy Independence Day and Canada Day, -- World Security Pros. Cutting Edge Training, Tools, and Techniques Tokyo, JapanNovember 29/30 - 2007http://pacsec.jp pgpkey http://dragos.com/ kyxpgp
Re: Bad performance on ThinkPad T41 (-current checked out on July 1)
On Tue, Jul 03, 2007 at 03:31:49AM +0200, Martin Toft wrote: I have run -current on my ThinkPad T41 laptop for nearly a year, and until now it has worked really well. Recently I bought a new disk for the machine and in connection with this I reinstalled OpenBSD using the most recent snapshot and then updated the system to -current. Unlike before, I now experience really bad performance. I have tried to document this with a series of small tests. The tests are run both on OpenBSD 4.1-current (GENERIC), checked out and built on July 1, and on KNOPPIX (V5.0.1CD-2006-09-25-DA), booted from CD. If you have any suggestions for tuning the performance of my system, please let me know. Also, if the bad performance is due to some mistakes that I've made, please throw some bricks at me. You can browse the dmesgs and tests here: http://obsd.dk/bertha-tests Direct link to OpenBSD dmesg: http://obsd.dk/bertha-tests/dmesg.openbsd.txt Direct link to KNOPPIX dmesg: http://obsd.dk/bertha-tests/dmesg.knoppix.txt Situation: The laptop is called bertha. I have a normal PC called kaffe that I use as remote end for the network benchmarks. The two machines are connected through a 100 Mbps switch. Highlights: 1. When scp'ing the KNOPPIX .iso from kaffe to bertha:/dev/null running OpenBSD, the transfer rate is only 4.4 MB/s. When running KNOPPIX, it's 9.9 MB/s. 2. Running OpenBSD, the disk's read rate is only 8.5-8.7 MB/s. When running KNOPPIX, it's 45-46 MB/s. 3. The numbers from openssl speed when running KNOPPIX are 5-12 times higher than the numbers from running OpenBSD. 4. When doing a netcat TCP transfer at full speed (approx 11.6 MB/s) from kaffe:/dev/zero to bertha:/dev/null running OpenBSD, the CPU is only 18% idle. When running KNOPPIX, it's 77% idle. Martin Include the output of 'atactl wd0' perhaps you have something like caching turned off. Also you can't hope for similiar results if you use different programs on both systems.
Re: i386 performance degradation since recent snapshots
2007/6/28, Brian Candler [EMAIL PROTECTED]: i'm encountering a real performance problem since a recent update : - previous snapshots dated around 22 may was working perfectly, launching my session (xfce) took around 10-15sec. Launching firefox took around 5secs - updated last week on 20 of june, launching my session takes around 1 minute and a half, launching ffx takes 20sec Just a thought: - what does 'hostname' show? it immediately shows my correct hostname with fqnd - do you have an entry in /etc/hosts which maps this name to your correct IP address? Yes, and also resolving localhost I've seen long delays in X startup if the system hostname can't be resolved to an IP address (which can be very annoying in dynamic IP environments, or where DHCP changes the hostname). But this experience is with non-OpenBSD boxes; I only use command line on OpenBSD. Also: - is your DNS working properly? (e.g. nslookup www.openbsd.org gives you a positive answer in a reasonably short period of time, and nslookup xyz gives you an NXDOMAIN answer also in a reasonably short period of time) Immediate answer.. in fact, my network configuration didn't change, so it can't be this... Maybe related to http://marc.info/?l=openbsd-miscm=11837716454w=2, i'll try to perform disk i/o tests.. but i'm really stuck with this issue. Performance is really bad. I'll try too with acpi disabled. Thanks for any hint, Landry
Re: 'netstat: invalid address (30000) ??? on 4.1-current i386 binary snapshot
On 6/28/07, Otto Moerbeek [EMAIL PROTECTED] wrote: On Thu, 28 Jun 2007, Adriaan wrote: On a freshly installed binary snapshot netstat -an -f inet6 shows netstat: invalid address (3) ??? thanks for the report, we can reproduce and are looking into this -Otto [snip] I reinstalled a couple of binary snapshot starting from May 30th. Of the ones I still have, the last one without this error is # dmesg | head -6 OpenBSD 4.1-current (GENERIC) #235: Sun Jun 3 17:29:47 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 268 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX real mem = 133791744 (127MB) avail mem = 121368576 (115MB) # netstat -and-f inet6 Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) tcp6 0 0 ::1.587*.*LISTEN tcp6 0 0 ::1.25 *.*LISTEN tcp6 0 0 *.22 *.*LISTEN tcp6 0 0 *.37 *.*LISTEN tcp6 0 0 *.13 *.*LISTEN tcp6 0 0 *.113 *.*LISTEN Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) udp6 0 0 ::1.512*.* --- The first one showing this error is: # dmesg | head -6 OpenBSD 4.1-current (GENERIC) #257: Fri Jun 8 14:18:54 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 268 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX real mem = 133791744 (127MB) avail mem = 121364480 (115MB) # netstat -an -f inet6 Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) tcp6 0 0 ::1.587*.*LISTEN tcp6 0 0 ::1.25 *.*LISTEN tcp6 0 0 *.22 *.*LISTEN tcp6 0 0 *.37 *.*LISTEN tcp6 0 0 *.13 *.*LISTEN tcp6 0 0 *.113 *.*LISTEN Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) udp6 0 0 ::1.512*.* netstat: invalid address (3) ??? That limits the time frame to about 5 days. IIn case you need more info, the serial console log of these installs is at http://siralas.nl/serial.log-netstat3error.txt =Adriaan==
Re: kerberos - incorrect net address
On Tue, 03 Jul 2007 03:39:51 + Douglas Maus [EMAIL PROTECTED] wrote: Could someone help me understand IP addresses, DNS, and Kerberos on OpenBSD? I was getting incorrect net address when trying to kinit, and I found that switching 2 lines in /etc/hosts putting first 10.0.1.201 auth.my.realm auth before ::1 auth.my.realm auth fixed this, but I don't understand this and I suspect this means I'm doing something else wrong. When kinit asks for a ticket i encodes the hosts address in the request. The KDC then compares the encoded address with the address in the IP-header and if they don't match you'll get this error. I started the kdc: # /usr/libexec/kdc but when I tried # kinit admin or # kinit admin --no-address I got incorrect net address Options goes before the pricipal, i.e. # kinit --no-addresses admin There are some configuration options that affects this as well; search krb5.conf(5) -- Bjvrn Sandell Chalmers University of Technology IT Services www.chalmers.se/its +46 (0)31 772 1000 No one ever says, 'I can't read that ASCII E-mail you sent me.'
Re: : acpi suspend?
If I may extend the question a bit... How are the chances that hibernate (to swap) will be implemented in the (relatively near) future? I just bought a used ThinkPad T23, it comes with XP and the BIOS does not look like a Phoenix BIOS, so it seems hibernation needs OS support the XP way. Have not tried fully the tips about ThinkPad T20..22 hibernation to DOS partition yet. It is in the pipeline. Any tips are welcome anyway... On Mon, Jul 02, 2007 at 06:21:39PM +0200, Artur Grabowski wrote: Vim Visual [EMAIL PROTECTED] writes: How are the chances that suspend is implemented in ACPI for 4.2?? 1% I had a prototype almost working at one point, messed it up without saving the working version, then never had time or energy to go back to it and noone else has picked it up. //art -- / Raimo Niskanen, Erlang/OTP, Ericsson AB
Re: 'netstat: invalid address (30000) ??? on 4.1-current i386 binary snapshot
On 7/3/07, Adriaan [EMAIL PROTECTED] wrote: On 6/28/07, Otto Moerbeek [EMAIL PROTECTED] wrote: On Thu, 28 Jun 2007, Adriaan wrote: On a freshly installed binary snapshot netstat -an -f inet6 shows netstat: invalid address (3) ??? thanks for the report, we can reproduce and are looking into this -Otto [snip] I reinstalled a couple of binary snapshot starting from May 30th. Of the ones I still have, the last one without this error is # dmesg | head -6 OpenBSD 4.1-current (GENERIC) #235: Sun Jun 3 17:29:47 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 268 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX real mem = 133791744 (127MB) avail mem = 121368576 (115MB) # netstat -and-f inet6 Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) tcp6 0 0 ::1.587*.*LISTEN tcp6 0 0 ::1.25 *.*LISTEN tcp6 0 0 *.22 *.*LISTEN tcp6 0 0 *.37 *.*LISTEN tcp6 0 0 *.13 *.*LISTEN tcp6 0 0 *.113 *.*LISTEN Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) udp6 0 0 ::1.512*.* --- The first one showing this error is: # dmesg | head -6 OpenBSD 4.1-current (GENERIC) #257: Fri Jun 8 14:18:54 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 268 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX real mem = 133791744 (127MB) avail mem = 121364480 (115MB) # netstat -an -f inet6 Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) tcp6 0 0 ::1.587*.*LISTEN tcp6 0 0 ::1.25 *.*LISTEN tcp6 0 0 *.22 *.*LISTEN tcp6 0 0 *.37 *.*LISTEN tcp6 0 0 *.13 *.*LISTEN tcp6 0 0 *.113 *.*LISTEN Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) udp6 0 0 ::1.512*.* netstat: invalid address (3) ??? That limits the time frame to about 5 days. IIn case you need more info, the serial console log of these installs is at http://siralas.nl/serial.log-netstat3error.txt The issue disappeared from the latest snapshot ;) $ dmesg | head -6 OpenBSD 4.1-current (GENERIC) #315: Mon Jul 2 13:24:20 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 268 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX real mem = 133791744 (127MB) avail mem = 121819136 (116MB) $ netstat -an -f inet6 Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) tcp6 0 0 ::1.587*.*LISTEN tcp6 0 0 ::1.25 *.*LISTEN tcp6 0 0 *.515 *.*LISTEN Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) udp6 0 0 ::1.512*.* $ =Adriaan=
PML4 address
I'm trying to determine PLM4's address on OpenBSD-4.1 Release on amd64. So, i'm looking into sys/arch/amd64/amd64/locore.S. There is a point where PML4 is set (line 519): /* * 3. Load %cr3 with pointer to PML4. */ movl%esi,%eax movl%eax,%cr3 I do a backwards search to find the latest value that %esi was loaded and find this (line 389): /* Clear tables */ movl%edi,%esi addl$PGOFSET,%esi andl$~PGOFSET,%esi So, i need to find the value of %edi. Register %edi was last set here (line 381): /* Save the symbols (if loaded). */ movlRELOC(esym),%eax testl %eax,%eax jz 1f subl$KERNBASE_LO,%eax /* XXX */ movl%eax,%edi esym is defined here (line 195): _C_LABEL(esym): .quad 0 # ptr to end of syms If 'esym' equals to zero, then %eax seems to get loaded with a negative address (movl RELOC(esym),%eax) that equals to -8000. I am aware that OpenBSD-amd64 is build with the gcc flag -mcmodel=kernel. Does this mean that the address -8000 is translated to 8000? Or does 'esym' get a non-zero value from somewhere else? Thanks, Constantine
Re: Trunk(4), vlan problems
Hi, I'm trying to set up an OpenBSD router against two switches (failover solution), the switches have a cable between them. em0 - connects to switch01 port 1 (switch01 addr: 10.10.1.18) em1 - connects to switch02 port 1 (switch02 addr: 10.10.1.19) switch 1 and 2 has a management vlan tagged on port 1 Now if i create vlan1 and use em0 as vlandev i can ping both switch01 and switch02, but if i create a failover trunk with em0 and em1 and use trunk0 as vlandev is don't work trunk0: flags=8802 mtu 1500 lladdr 00:0e:0c:db:3f:48 trunk: trunkproto failover trunkport em1 trunkport em0 master groups: trunk media: Ethernet autoselect status: active vlan1: flags=8843 mtu 1500 lladdr 00:0e:0c:db:3f:48 description: VLAN 1, Management vlan: 1 priority: 0 parent interface: trunk0 groups: vlan inet 10.10.1.17 netmask 0xfff0 broadcast 10.10.1.31 inet6 fe80::20e:cff:fedb:3f48%vlan1 prefixlen 64 scopeid 0xe If i ping the openbsd machine from the switch and listen on the trunk0 interface i see this: 23:21:18.907451 802.1Q vid 1 pri 0 arp who-has 10.10.1.17 tell 10.10.1.18 but if i listen to vlan1 that is connected to trunk0 i don't see any traffic. What am I doing wrong? Best regards Fredrik Carlsson I did some more testing, If i drop the tagging in the interfaces on the switch against the openbsd machine and use them as ordinary ports and assign an IP addr to trunk0 everything work fine. The switches has a vlan-trunk between them so that works as well. I unplugged the interfaces in trunk0 to test the connectivity between the switches and everything works. The problem seems to be when i attach a vlan to trunk0, the traffic don't go to trunk0. The vlan config works when I'm not using trunk(4), can this be a bug in trunk(4)? Any ideas?
Re: Trunk(4), vlan problems
On 2007/07/03 11:48, Fredrik Carlsson wrote: trunk0: flags=8802 mtu 1500 vlan1: flags=8843 mtu 1500 this is strange, where is the decode of the flags? In-Reply-To: [EMAIL PROTECTED] ahh... perhaps your mail client ate them. anyway, 8802 means your trunk0 is not ifconfig'd up.
Re: Trunk(4), vlan problems
On 2007/07/03 11:48, Fredrik Carlsson wrote: trunk0: flags=8802 mtu 1500 vlan1: flags=8843 mtu 1500 this is strange, where is the decode of the flags? In-Reply-To: [EMAIL PROTECTED] ahh... perhaps your mail client ate them. anyway, 8802 means your trunk0 is not ifconfig'd up. Thanks, up was missing, it is working now. I replied from another computer so i copied the text into a webclient. // Fredrik
Insertion of compact flash w/ pcmcia card == kernel panic w/ 4.1-STABLE or 4.1-CURRENT
Reading the wd man page, I assumed that flash cards were supported in Openbsd 4.1. This particular combo of SanDisk's CompactFlash PC Card Adapter model SDAD-38-A10 with two different SanDisk compactflash cards generated kernel panic as soon as the compact flash cards were inserted into a Thinkpad X60s with 4.1-CURRENT and a Thinkpad X32 with 4.1-STABLE. I tested this same combo with a third laptop with OpenBSD 3.8 and I was finally able to mount the compact flash. Enclosed dmesg w/ trace and ps for the Thinkpad X60s with 4.1-CURRENT: OpenBSD 4.1-current (GENERIC.MP.acpi) #0: Mon Jun 11 14:37:11 CEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP.acpi cpu0: Intel(R) Core(TM) Duo CPU L2500 @ 1.83GHz (GenuineIntel 686-class) 1.83 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR real mem = 2137419776 (2038MB) avail mem = 2051452928 (1956MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/16/07, BIOS32 rev. 0 @ 0xfd690, SMBIOS rev. 2.4 @ 0xe0010 (67 entries) bios0: LENOVO 1702H7U pcibios0 at bios0: rev 2.1 @ 0xfd620/0x9e0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82371FB ISA rev 0x00) pcibios0: PCI bus #22 is the last bus bios0: ROM list: 0xc/0xea00! 0xcf000/0x1000 0xd/0x1000 0xdc000/0x4000! 0xe/0x1! acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT SSDT SSDT SSDT SSDT acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) Duo CPU L2500 @ 1.83GHz (GenuineIntel 686-class) 1.83 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins ioapic0: duplicate apic id, remapped to apid 2 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 0 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus 3 (EXP1) acpiprt4 at acpi0: bus 4 (EXP2) acpiprt5 at acpi0: bus 12 (EXP3) acpiprt6 at acpi0: bus 21 (PCI1) acpiec0 at acpi0: EC__ acpicpu0 at acpi0 C3, C2 acpicpu1 at acpi0 C3, C2 acpitz0 at acpi0, critical temperature: 127 degC acpitz1 at acpi0, critical temperature: 97 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0: model: 93P5030 serial: 4492 type: LION oem: SONY acpibat1 at acpi0: BAT1: not present acpibat2 at acpi0: BAT2: not present acpiac0 at acpi0: AC unit online acpidock0 at acpi0: GDCK: not docked (0) cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b1c06000b1c cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1833 MHz (1148 mV): speeds: 1833, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 82945GM MCH rev 0x03 vga1 at pci0 dev 2 function 0 Intel 82945GM Video rev 0x03: aperture at 0xee10, size 0x1000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) Intel 82945GM Video rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x02: apic 2 int 17 (irq 11) azalia0: host: High Definition Audio rev. 1.0 azalia0: codec: Analog Devices AD1981HD (rev. 2.0), HDA version 1.0 azalia0: RIRB time out audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x02 pci1 at ppb0 bus 2 em0 at pci1 dev 0 function 0 Intel PRO/1000MT (82573L) rev 0x00: apic 2 int 16 (irq 11), address 00:16:d3:32:eb:43 ppb1 at pci0 dev 28 function 1 Intel 82801GB PCIE rev 0x02 pci2 at ppb1 bus 3 wpi0 at pci2 dev 0 function 0 Intel PRO/Wireless 3945ABG rev 0x02: apic 2 int 17 (irq 11), MoW1, address 00:19:d2:28:0b:06 ppb2 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x02 pci3 at ppb2 bus 4 ppb3 at pci0 dev 28 function 3 Intel 82801GB PCIE rev 0x02 pci4 at ppb3 bus 12 uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x02: apic 2 int 16 (irq 11) uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x02: apic 2 int 17 (irq 11) uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x02: apic 2 int 18 (irq 11) uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x02: apic 2 int 19 (irq 11) ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x02: apic 2 int 19 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1 ppb4 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xe2 pci5 at ppb4 bus 21 cbb0 at pci5 dev 0 function 0 Ricoh 5C476 CardBus rev 0xb4: apic 2 int 16 (irq 11) Ricoh 5C552 Firewire rev 0x09 at pci5 dev 0 function 1 not configured sdhc0 at pci5 dev 0 function 2 Ricoh 5C822 SD/MMC rev 0x18: apic 2 int 18 (irq
Re: Bad performance on ThinkPad T41 (-current checked out on July 1)
On Tue, Jul 03, 2007 at 04:32:13PM +1000, Jonathan Gray wrote: Include the output of 'atactl wd0' perhaps you have something like caching turned off. Also you can't hope for similiar results if you use different programs on both systems. Disk I/O is the only test where I use different programs (hdparm and dd), as I couldn't find a port/package of hdparm for OpenBSD. Still, I think the results are so different that they set of alarm bells -- 8.5-8.7 MB/s vs. 45-46 MB/s. Thanks for your interest my case. Here is the output from atactl wd0. It looks like I have caching turned on (read look-ahead and write cache): Model: WDC WD1200BEVE-11UYT0, Rev: 01.04A01, Serial #: WD-WXE407324062 Device type: ATA, fixed Cylinders: 16383, heads: 16, sec/track: 63, total sectors: 234441648 Device capabilities: ATA standby timer values IORDY operation IORDY disabling Device supports the following standards: ATA-1 ATA-2 ATA-3 ATA-4 ATA-5 ATA-6 ATA-7 Master password revision code 0xfffe Device supports the following command sets: NOP command READ BUFFER command WRITE BUFFER command Host Protected Area feature set Read look-ahead Write cache Power Management feature set Security Mode feature set SMART feature set Flush Cache Ext command Flush Cache command Device Configuration Overlay feature set 48bit address feature set Automatic Acoustic Management feature set Set Max security extension commands Advanced Power Management feature set DOWNLOAD MICROCODE command IDLE IMMEDIATE with UNLOAD FEATURE SMART self-test SMART error logging Device has enabled the following command sets/features: NOP command READ BUFFER command WRITE BUFFER command Host Protected Area feature set Read look-ahead Write cache Power Management feature set SMART feature set Flush Cache Ext command Flush Cache command Device Configuration Overlay feature set 48bit address feature set Advanced Power Management feature set DOWNLOAD MICROCODE command Martin
Re: Bad performance on ThinkPad T41 (-current checked out on July 1)
On Tue, Jul 03, 2007 at 01:49:09PM +0200, Martin Toft wrote: On Tue, Jul 03, 2007 at 04:32:13PM +1000, Jonathan Gray wrote: Include the output of 'atactl wd0' perhaps you have something like caching turned off. Also you can't hope for similiar results if you use different programs on both systems. Disk I/O is the only test where I use different programs (hdparm and dd), as I couldn't find a port/package of hdparm for OpenBSD. Still, I think the results are so different that they set of alarm bells -- 8.5-8.7 MB/s vs. 45-46 MB/s. Well at least use dd in both cases and use the same kinds of buffered or unbuffered devices/files. I imagine the results will be diferrent if you dd from a file to /dev/null for example.
Issues Using Forticlient behind an OpenBSD Firewall to connect to a Fortigate IPSEC VPN Server
Hi, I am on a MS Windows XP system behind an OpenBSD 4.0 firewall. All outbound TCP, UDP and ICMP traffic from the LAN is let out through PF. I am able to connect to another Fortigate IPSEC VPN Server on the Internet using Forticlient on the same XP system but no data communication happens between them. I tried connecting from a network that is not firewalled by OpenBSD and the VPN connection to the same Fortigate Server is working fine and I am able to access the internal machines. Is there any other traffic I should allow other than TCP,UDP,ICMP on the firewall to connect and pass traffic between the Fortigate VPN server and the XP system using Forticlient? Thankyou so much Kind Regards Siju
Re: Issues Using Forticlient behind an OpenBSD Firewall to connect to a Fortigate IPSEC VPN Server
On Tuesday 03 July 2007 07:36, Siju George wrote: Hi, I am on a MS Windows XP system behind an OpenBSD 4.0 firewall. All outbound TCP, UDP and ICMP traffic from the LAN is let out through PF. I am able to connect to another Fortigate IPSEC VPN Server on the Internet using Forticlient on the same XP system but no data communication happens between them. I tried connecting from a network that is not firewalled by OpenBSD and the VPN connection to the same Fortigate Server is working fine and I am able to access the internal machines. Is there any other traffic I should allow other than TCP,UDP,ICMP on the firewall to connect and pass traffic between the Fortigate VPN server and the XP system using Forticlient? Are you using NAT or is ip forwarding turned on, in the firewall? Also, is NAT Traversal turned on Fortigate? Thankyou so much Kind Regards Siju !DSPAM:1,468a440f148616107113666! -- Vijay Sankar ForeTell Technologies Limited 59 Flamingo Avenue, Winnipeg, MB, Canada R3J 0X6 Phone: +1 (204) 885-9535, E-Mail: [EMAIL PROTECTED]
Re: Issues Using Forticlient behind an OpenBSD Firewall to connect to a Fortigate IPSEC VPN Server
Siju George [EMAIL PROTECTED] writes: I tried connecting from a network that is not firewalled by OpenBSD and the VPN connection to the same Fortigate Server is working fine and I am able to access the internal machines. Sounds almost like you need to pass at least one of the protocols gre and esp between the vpn hosts. I know at least some of the Cisco VPN products require both. - P -- Peter N. M. Hansteen, member of the first RFC 1149 implementation team http://www.blug.linux.no/rfc1149/ http://www.datadok.no/ http://www.nuug.no/ Remember to set the evil bit on all malicious network traffic delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
bgp router setup
hi, anybody can tell howto create a good redundant bgp router setup? right now i have 2 uplinks, both announcing a full table, and one bgp router with its own AS. Now, the questions is how a redundant setup would look like. would it make sence to use carp devices? or is it better to setup some kind of ibgp with an route reflector? how would such a setup look like? thx in advance, erich
Re: 'netstat: invalid address (30000) ??? on 4.1-current i386 binary snapshot
On Tue, 3 Jul 2007, Adriaan wrote: On 7/3/07, Adriaan [EMAIL PROTECTED] wrote: On 6/28/07, Otto Moerbeek [EMAIL PROTECTED] wrote: On Thu, 28 Jun 2007, Adriaan wrote: On a freshly installed binary snapshot netstat -an -f inet6 shows netstat: invalid address (3) ??? thanks for the report, we can reproduce and are looking into this -Otto [snip] I reinstalled a couple of binary snapshot starting from May 30th. Of the ones I still have, the last one without this error is # dmesg | head -6 OpenBSD 4.1-current (GENERIC) #235: Sun Jun 3 17:29:47 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 268 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX real mem = 133791744 (127MB) avail mem = 121368576 (115MB) # netstat -and-f inet6 Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) tcp6 0 0 ::1.587*.*LISTEN tcp6 0 0 ::1.25 *.*LISTEN tcp6 0 0 *.22 *.*LISTEN tcp6 0 0 *.37 *.*LISTEN tcp6 0 0 *.13 *.*LISTEN tcp6 0 0 *.113 *.*LISTEN Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) udp6 0 0 ::1.512*.* --- The first one showing this error is: # dmesg | head -6 OpenBSD 4.1-current (GENERIC) #257: Fri Jun 8 14:18:54 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 268 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX real mem = 133791744 (127MB) avail mem = 121364480 (115MB) # netstat -an -f inet6 Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) tcp6 0 0 ::1.587*.*LISTEN tcp6 0 0 ::1.25 *.*LISTEN tcp6 0 0 *.22 *.*LISTEN tcp6 0 0 *.37 *.*LISTEN tcp6 0 0 *.13 *.*LISTEN tcp6 0 0 *.113 *.*LISTEN Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) udp6 0 0 ::1.512*.* netstat: invalid address (3) ??? That limits the time frame to about 5 days. IIn case you need more info, the serial console log of these installs is at http://siralas.nl/serial.log-netstat3error.txt The issue disappeared from the latest snapshot ;) Yeah, thanks again for the report. I should have mentioned the errors was fixed a few days ago, in response to your report. -Otto $ dmesg | head -6 OpenBSD 4.1-current (GENERIC) #315: Mon Jul 2 13:24:20 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II (GenuineIntel 686-class, 512KB L2 cache) 268 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX real mem = 133791744 (127MB) avail mem = 121819136 (116MB) $ netstat -an -f inet6 Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) tcp6 0 0 ::1.587*.*LISTEN tcp6 0 0 ::1.25 *.*LISTEN tcp6 0 0 *.515 *.*LISTEN Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address(state) udp6 0 0 ::1.512*.* $ =Adriaan=
dhcp question
List, I have a 4.1 GENERIC machine acting as DHCP server, serving out IP addresses to 7 diskless client machines. Each client machine needs to be pushed a different configuration file in order to start a process once booted. There is a chance that any number of clients may be replaced at any time. My initial thinking was to define a range of 7 IP addresses in dhcpd.conf so when the client has got an IP it can then request a file named as the clients IP address from the server. However if a client needs replacing the new client will dhcp for an address but dhcpd will complain (justifiably) that there are no spare addresses (the lease-time being 1 day). So if I defined a large pool of IP addresses in dhcpd.conf that would avert the problem described above, however I'm struggling to think of a solution on how would clients would request the correct configuration file? and how could I handle new clients replacing broken ones with regard to dishing out the correct configuration file? Apologies for such woolly posting, I'm just hoping for some inspired ideas. Thanks for your time
Re: dhcp question
On Tue, Jul 03, 2007 at 02:45:00PM +0100, mgb wrote:
So if I defined a large pool of IP addresses in dhcpd.conf that
would avert the problem described above, however I'm struggling to
think of a solution on how would clients would request the correct
configuration file? and how could I handle new clients replacing
broken ones with regard to dishing out the correct configuration
file?
Use lladdrs, not IP addresses, to name or serve the files. This is
how most PXE setups work. See pxeboot(8) for some discussion.
--
o--{ Will Maier }--o
| web:...http://www.lfod.us/ | [EMAIL PROTECTED] |
*--[ BSD Unix: Live Free or Die ]--*
trunk, carp
Hi again, My setup looks like this: [em0, em1]-trunk0 - vlan2 - carp2 [em2, em3]-trunk1 - vlan104 - carp104 If don't use carp at all everything works fine, but when i add carp to trunk0 and trunk1 it takes a few seconds and the box hangs and a poweroff reboot is needed. If only one carp device exists the machine works but as soon as i add two it hangs. Even if I made some config error the machine should not hang. trunk0: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:48 trunk: trunkproto failover trunkport em1 active trunkport em0 master,active groups: trunk media: Ethernet autoselect status: active inet6 fe80::20e:cff:fedb:3f48%trunk0 prefixlen 64 scopeid 0xa trunk1: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:4a trunk: trunkproto failover trunkport em3 active trunkport em2 master,active groups: trunk media: Ethernet autoselect status: active inet6 fe80::20e:cff:fedb:3f4a%trunk1 prefixlen 64 scopeid 0xb vlan1: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:48 vlan: 1 priority: 0 parent interface: trunk0 groups: vlan inet6 fe80::20e:cff:fedb:3f48%vlan1 prefixlen 64 scopeid 0xc vlan2: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:4a vlan: 2 priority: 0 parent interface: trunk1 groups: vlan inet6 fe80::20e:cff:fedb:3f4a%vlan2 prefixlen 64 scopeid 0xe carp1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:00:5e:00:01:01 carp: MASTER carpdev vlan1 vhid 1 advbase 1 advskew 0 groups: carp inet6 fe80::200:5eff:fe00:101%carp1 prefixlen 64 scopeid 0x16 inet 10.10.1.17 netmask 0xfff0 broadcast 10.10.1.31 carp2: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:00:5e:00:01:01 carp: MASTER carpdev vlan2 vhid 1 advbase 1 advskew 0 groups: carp inet6 fe80::200:5eff:fe00:101%carp2 prefixlen 64 scopeid 0x17 inet 10.10.1.33 netmask 0xfff0 broadcast 10.10.1.47 // Fredrik
Re: dhcp question
mgb wrote: List, I have a 4.1 GENERIC machine acting as DHCP server, serving out IP addresses to 7 diskless client machines. Each client machine needs to be pushed a different configuration file in order to start a process once booted. There is a chance that any number of clients may be replaced at any time. My initial thinking was to define a range of 7 IP addresses in dhcpd.conf so when the client has got an IP it can then request a file named as the clients IP address from the server. However if a client needs replacing the new client will dhcp for an address but dhcpd will complain (justifiably) that there are no spare addresses (the lease-time being 1 day). since these clients are probably wired, why not lower the lease time to, say, 30 minutes? this would allow you to rotate machines pretty easily and have the new one pickup shortly after the old one is removed. depends on how quickly you're planning to rotate the dhcp clients. 30 minutes of time between disconnecting one (maybe b/c it's broken?) and reconnecting another to take its place seems reasonable. if this doesn't cut it fish around for a way to terminate dhcp leases as a function of whether the diskless services are active for a given client. maybe RADIUS could be helpful... don't have much experience here. cheers, jake So if I defined a large pool of IP addresses in dhcpd.conf that would avert the problem described above, however I'm struggling to think of a solution on how would clients would request the correct configuration file? and how could I handle new clients replacing broken ones with regard to dishing out the correct configuration file? Apologies for such woolly posting, I'm just hoping for some inspired ideas. Thanks for your time
Re: trunk, carp
On Tue, Jul 03, 2007 at 03:57:20PM +0200, Fredrik Carlsson wrote: Hi again, My setup looks like this: [em0, em1]-trunk0 - vlan2 - carp2 [em2, em3]-trunk1 - vlan104 - carp104 If don't use carp at all everything works fine, but when i add carp to trunk0 and trunk1 it takes a few seconds and the box hangs and a poweroff reboot is needed. can you show the command sequence you are using? what openbsd release are you using, can you send a dmesg? please try to get some more details, try to find a way to reproduce it. use the list [EMAIL PROTECTED] for bug reports or open a pr with sendbug(1) (see the manpage for details). If only one carp device exists the machine works but as soon as i add two it hangs. Even if I made some config error the machine should not hang. trunk0: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:48 trunk: trunkproto failover trunkport em1 active trunkport em0 master,active groups: trunk media: Ethernet autoselect status: active inet6 fe80::20e:cff:fedb:3f48%trunk0 prefixlen 64 scopeid 0xa trunk1: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:4a trunk: trunkproto failover trunkport em3 active trunkport em2 master,active groups: trunk media: Ethernet autoselect status: active inet6 fe80::20e:cff:fedb:3f4a%trunk1 prefixlen 64 scopeid 0xb vlan1: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:48 vlan: 1 priority: 0 parent interface: trunk0 groups: vlan inet6 fe80::20e:cff:fedb:3f48%vlan1 prefixlen 64 scopeid 0xc vlan2: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:4a vlan: 2 priority: 0 parent interface: trunk1 groups: vlan inet6 fe80::20e:cff:fedb:3f4a%vlan2 prefixlen 64 scopeid 0xe carp1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:00:5e:00:01:01 carp: MASTER carpdev vlan1 vhid 1 advbase 1 advskew 0 groups: carp inet6 fe80::200:5eff:fe00:101%carp1 prefixlen 64 scopeid 0x16 inet 10.10.1.17 netmask 0xfff0 broadcast 10.10.1.31 carp2: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:00:5e:00:01:01 carp: MASTER carpdev vlan2 vhid 1 advbase 1 advskew 0 groups: carp inet6 fe80::200:5eff:fe00:101%carp2 prefixlen 64 scopeid 0x17 inet 10.10.1.33 netmask 0xfff0 broadcast 10.10.1.47 // Fredrik
Re: : : acpi suspend?
On Tue, Jul 03, 2007 at 09:44:09AM +0200, Raimo Niskanen wrote: If I may extend the question a bit... How are the chances that hibernate (to swap) will be implemented in the (relatively near) future? I just bought a used ThinkPad T23, it comes with XP and the BIOS does not look like a Phoenix BIOS, so it seems hibernation needs OS support the XP way. Have not tried fully the tips about ThinkPad T20..22 hibernation to DOS partition yet. It is in the pipeline. Any tips are welcome anyway... For the record. Hibernation using /usr/ports/sysutils/tphdisk on a type 0x16 (OS/2 hidden) partition works just fine for a ThinkPad T23 dual-booting OpenBSD and Windows XP. Even if the hibernation partition is not the first on the disk, which is good because XP wants to be the first on the disk. It is apparently a Phoenix BIOS in disguise. XP does not use BIOS hibernation. It implements it on its own. I still think hibernation without BIOS support (to swap) would be a nifty feature, but realize laptops are not the primary target for OpenBSD (laptops are still cool to boast with). On Mon, Jul 02, 2007 at 06:21:39PM +0200, Artur Grabowski wrote: Vim Visual [EMAIL PROTECTED] writes: How are the chances that suspend is implemented in ACPI for 4.2?? 1% I had a prototype almost working at one point, messed it up without saving the working version, then never had time or energy to go back to it and noone else has picked it up. //art -- / Raimo Niskanen, Erlang/OTP, Ericsson AB -- / Raimo Niskanen, Erlang/OTP, Ericsson AB
IPSec Road Warriors
Hi, we are running an OpenBSD 4.0 Firewall/VPN Cluster (CARP). One of my collegues connects with a DrayTek 2700 Router to the Internet, and this router is establishing an IPSec-Tunnel to our Firewall- Cluster. The Tunnel is stable, besides the 24-Hour disconnect. The IP of the DrayTek changes, and the Tunnel isn't set up again. my ipsec.conf: --snip-- ike dynamic esp from 10.0.0.0/24 to 10.1.1.0/24 local myip peer myhost.ath.cx\ main auth hmac-sha1 enc 3des group modp1024\ quick auth hmac-sha1 enc aes \ srcid myID dstid hisID \ psk abcdefg --snap-- the manual-page says dynamic for roadwarriors. the error message my vpn-endpoint is: --snip-- Jul 3 09:09:25 bonnie isakmpd[24104]: dropped message from 84.186.179.171 port 500 due to notification type NO_PROPOSAL_CHOSEN --snap-- after flushing and reloading the /etc/ipsec.conf, the connection is established. any ideas, what i can do? Thx! Mit freundlichen Gr|_en Georg Buschbeck Information Technology THOMAS DAILY GmbH Adlerstra_e 19 79098 Freiburg Deutschland T + 49 761 3 85 59 170 F + 49 761 3 85 59 550 E [EMAIL PROTECTED] www.thomas-daily.de Geschdftsf|hrer/Managing Directors: Wendy Thomas, Susanne Larbig Handelsregister Freiburg i.Br., HRB 3947 Mit freundlichen Gr|_en Georg Buschbeck Information Technology THOMAS DAILY GmbH Adlerstra_e 19 79098 Freiburg Deutschland T + 49 761 3 85 59 170 F + 49 761 3 85 59 550 E [EMAIL PROTECTED] www.thomas-daily.de Geschdftsf|hrer/Managing Directors: Wendy Thomas, Susanne Larbig Handelsregister Freiburg i.Br., HRB 3947
sensorsd says the sensor is within limit, but it's not...
Hi Misc I am probably missing something, but what.. sensorsd says in the syslog that the sensor is within limits even though a sysctl -a|grep sensor shows that it is not. Are there any known bugs? I have checked the list and cannot find anything related to this... I run a Dell PE830 on OpenBSD 4.0 stable (latest update in May 25:th). I have these sensors which appears to always show the correct values running a sysctl -a|grep sensor. hw.sensors.0=ipmi0, Temp, 43.00 degC, OK hw.sensors.1=ipmi0, Planar Temp, 38.00 degC, OK hw.sensors.2=ipmi0, CMOS Battery, 3.13 V DC, OK hw.sensors.3=ipmi0, Back Fan, 2204 RPM, OK hw.sensors.4=ipmi0, Intrusion, Off, OK hw.sensors.5=ami0, sd0, drive online, OK From sensords.conf hw.sensors.0:high=42C:command=/bin/echo test test|/usr/bin/mailx -s Sensor warning: CPU temp over %2 bla bla bla MYEMAIL hw.sensors.1:high=39C:command=/bin/echo test test|/usr/bin/mailx -s Sensor warning: Chassie temp over %2 bla bla bla MYEMAIL Starting sensorsd and look at /var/log/daemon Jul 3 16:12:22 xanadu sensorsd[14634]: hw.sensors.0: within limits, value: 43.00 degC Jul 3 16:12:22 xanadu sensorsd[14634]: hw.sensors.1: within limits, value: 38.00 degC I assume I receive no reports as the daemon say the sensor wrongly is within the limits A dmesg follows below my autosignature Thanks in advance Per-Olov -- GPG keyID: 4DB283CE GPG fingerprint: 45E8 3D0E DE05 B714 D549 45BC CFB4 BBE9 4DB2 83CE GPG key: http://keyserv.nic-se.se:11371/pks/lookup?op=getsearch=0xCFB4BBE94DB283CE OpenBSD 4.0-stable (GENERIC) #0: Fri May 25 21:07:24 CEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz (GenuineIntel 686-class) 2.81 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16 real mem = 536182784 (523616K) avail mem = 481148928 (469872K) using 4256 buffers containing 26910720 bytes (26280K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 08/22/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xfa3d0 (48 entries) bios0: Dell Computer Corporation PowerEdge 830 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb900/208 (11 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801GB LPC rev 0x00) pcibios0: PCI bus #8 is the last bus bios0: ROM list: 0xc/0x8000 0xc8000/0x1000 0xc9000/0x1600 0xca800/0x2600 0xec000/0x4000! ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel E7230 MCH rev 0x00 ppb0 at pci0 dev 1 function 0 Intel E7230 PCIE rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 Intel 41210 PCIE-PCIX rev 0x09 pci2 at ppb1 bus 2 em0 at pci2 dev 4 function 0 Intel PRO/1000MT (82546GB) rev 0x03: irq 3, address 00:0e:0c:72:4b:a2 em1 at pci2 dev 4 function 1 Intel PRO/1000MT (82546GB) rev 0x03: irq 11, address 00:0e:0c:72:4b:a3 ppb2 at pci1 dev 0 function 2 Intel 41210 PCIE-PCIX rev 0x09 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01 pci4 at ppb3 bus 4 ppb4 at pci4 dev 0 function 0 Intel PCIE-PCIE rev 0x09 pci5 at ppb4 bus 5 ami0 at pci5 dev 2 function 0 Symbios Logic MegaRAID rev 0x01: irq 10 ami0: LSI 523, 32b, FW 713R, BIOS vG121, 64MB RAM ami0: 1 channels, 0 FC loops, 1 logical drives scsibus0 at ami0: 40 targets sd0 at scsibus0 targ 0 lun 0: AMI, Host drive #00, SCSI2 0/direct fixed sd0: 476935MB, 476935 cyl, 64 head, 32 sec, 512 bytes/sec, 976762880 sec total scsibus1 at ami0: 16 targets ppb5 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01 pci6 at ppb5 bus 6 bge0 at pci6 dev 0 function 0 Broadcom BCM5721 rev 0x11, BCM5750 B1 (0x4101): irq 3, address 00:12:3f:2a:3e:b8 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb6 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01 pci7 at ppb6 bus 7 uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: irq 10 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: irq 5 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: irq 11 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb7 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xe1 pci8 at ppb7 bus 8 vga1 at pci8 dev 5 function 0 XGI Technology Volari Z7 rev 0x00 wsdisplay0 at vga1 mux
Re: : : : Troubleshooting PCMCIA modem 3Com 3CXM756
On Thu, Jun 14, 2007 at 10:22:50AM +0200, Raimo Niskanen wrote: Hi again, sorry to bother you again but who else would know? Can ayone make an educated guess on what has the best possibility to work for OpenBSD 4.1: * US Robotics USB modem * Other USB modem (Sweex) * ZONET ZFM5600 MODEM PC-CARD that is supposed have drivers for Linux * Any Serial line modem (Sweex) that claims to do AT commands For the archives: The ZONET ZFM5600 MODEM PC-CARD works perfectly with OpenBSD (4.1). It has a hardware-only Intel chipset. I would have posted a dmsg snipplet if I had the machine here. -- / Raimo Niskanen, Erlang/OTP, Ericsson AB
Re: Bad performance on ThinkPad T41 (-current checked out on July 1)
On Tue, Jul 03, 2007 at 10:20:18PM +1000, Jonathan Gray wrote: On Tue, Jul 03, 2007 at 01:49:09PM +0200, Martin Toft wrote: Disk I/O is the only test where I use different programs (hdparm and dd), as I couldn't find a port/package of hdparm for OpenBSD. Still, I think the results are so different that they set off alarm bells -- 8.5-8.7 MB/s vs. 45-46 MB/s. Well at least use dd in both cases and use the same kinds of buffered or unbuffered devices/files. I imagine the results will be diferrent if you dd from a file to /dev/null for example. You're absolutely right. On OpenBSD, dd'ing a file actually gives an OK result: $ dd if=KNOPPIX_V5.0.1CD-2006-09-25-DA.iso of=/dev/null 1433280+0 records in 1433280+0 records out 733839360 bytes transferred in 22.626 secs (32432248 bytes/sec) 30.93 MB/s that is. As I can't figure out how to mount my OpenBSD partitions on KNOPPIX, I can't do the same test in that environment. Thanks for pointing out that the previous comparison was unfair. It seems that I can't really be disappointed with my OpenBSD disk I/O now, only the system's number crunching abilities. I would like to remind you, that I could squeeze a lot more CPU power out of the laptop with OpenBSD -current about a month ago, so in some way, I suspect that some crucial code has been changed in the meantime. Martin
Re: trunk, carp
On Tue, Jul 03, 2007 at 03:57:20PM +0200, Fredrik Carlsson wrote: Hi again, My setup looks like this: [em0, em1]-trunk0 - vlan2 - carp2 [em2, em3]-trunk1 - vlan104 - carp104 If don't use carp at all everything works fine, but when i add carp to trunk0 and trunk1 it takes a few seconds and the box hangs and a poweroff reboot is needed. can you show the command sequence you are using? what openbsd release are you using, can you send a dmesg? please try to get some more details, try to find a way to reproduce it. use the list [EMAIL PROTECTED] for bug reports or open a pr with sendbug(1) (see the manpage for details). If only one carp device exists the machine works but as soon as i add two it hangs. Even if I made some config error the machine should not hang. trunk0: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:48 trunk: trunkproto failover trunkport em1 active trunkport em0 master,active groups: trunk media: Ethernet autoselect status: active inet6 fe80::20e:cff:fedb:3f48%trunk0 prefixlen 64 scopeid 0xa trunk1: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:4a trunk: trunkproto failover trunkport em3 active trunkport em2 master,active groups: trunk media: Ethernet autoselect status: active inet6 fe80::20e:cff:fedb:3f4a%trunk1 prefixlen 64 scopeid 0xb vlan1: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:48 vlan: 1 priority: 0 parent interface: trunk0 groups: vlan inet6 fe80::20e:cff:fedb:3f48%vlan1 prefixlen 64 scopeid 0xc vlan2: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0e:0c:db:3f:4a vlan: 2 priority: 0 parent interface: trunk1 groups: vlan inet6 fe80::20e:cff:fedb:3f4a%vlan2 prefixlen 64 scopeid 0xe carp1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:00:5e:00:01:01 carp: MASTER carpdev vlan1 vhid 1 advbase 1 advskew 0 groups: carp inet6 fe80::200:5eff:fe00:101%carp1 prefixlen 64 scopeid 0x16 inet 10.10.1.17 netmask 0xfff0 broadcast 10.10.1.31 carp2: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:00:5e:00:01:01 carp: MASTER carpdev vlan2 vhid 1 advbase 1 advskew 0 groups: carp inet6 fe80::200:5eff:fe00:101%carp2 prefixlen 64 scopeid 0x17 inet 10.10.1.33 netmask 0xfff0 broadcast 10.10.1.47 // Fredrik Hi, Release: OpenBSD 4.1, with all avalible patches. It is not that hard to reproduce: add carp1 - works, system works fine add carp2 - it hangs after about 5-10 second. /etc/hostname.em0-3: up /etc/hostname.trunk0 trunkproto failover trunkport em0 trunkport em1 up /etc/hostname.trunk1 trunkproto failover trunkport em2 trunkport em3 up /etc/hostname.vlan1 vlan 1 vlandev trunk0 /etc/hostname.vlan2 vlan 2 vlandev trunk1 /etc/hostname.carp1 inet 10.10.1.17 255.255.255.240 NONE vhid 1 carpdev vlan1 pass password1 /etc/hostname.carp1 inet 10.10.1.33 255.255.255.240 NONE vhid 2 carpdev vlan1 pass password1 I will send a PR later, the machine is not connected to Internet. // Fredrik OpenBSD 4.1-stable (ZTHN-FW01.MP) #2: Tue Jul 3 09:36:02 CEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 536215552 (523648K) avail mem = 446967808 (436492K) using 13142 buffers containing 53829632 bytes (52568K) of memory mainbus0 (root) bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries) bios0: Dell Computer Corporation PowerEdge 860 acpi at mainbus0 not configured ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4 mainbus0: Intel MP Specification (Version 1.4) cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) D CPU 3.00GHz, 3000.54 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,NXE,LON G cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 200MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Pentium(R) D CPU 3.00GHz, 3000.12 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,NXE,LON G cpu1: 2MB 64b/line 8-way L2 cache mpbios: bus 0 is type PCI mpbios: bus 1 is type PCI mpbios: bus 2 is type PCI mpbios: bus 3 is type PCI mpbios: bus 4 is type PCI mpbios: bus 5 is type PCI mpbios: bus 6 is type PCI mpbios: bus 7 is type PCI mpbios: bus 8 is type ISA ioapic0 at mainbus0 apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 ioapic1 at mainbus0 apid 3 pa
Commerces à vendre
Bonjour, Vous vendez votre fond de commerce ? Vous souhaitez acquirir un fond de commerce ? Consultez ou inscrivez gratuitement votre annonce dachat ou de vente de fond de commerce sur www.vente-fonds-commerce.fr. Dans lattente de votre prochaine visite, Veuillez agrier nos sinchres salutations. Liquipe Vente-Fonds-Commerce.fr www.vente-fonds-commerce.fr [EMAIL PROTECTED] Offre riservie exclusivement aux entreprises. Conformiment ` la Loi Informatique et Libertis parue au Journal Officiel du 6 janvier 1978, vous disposez d'un droit d'acchs, de rectification, et d'opposition aux donnies personnelles vous concernant. Pour ne plus recevoir d'informations de notre part, Cliquez ici
sk(4): Marvell 88E1011 not working with 4.1
Hi folks, Since i upgraded our firewall to 4.1, i have severe problems with the Marvell 88E1011 Gigabit interface. netstat shows thousands of ierrs after 15 minutes of uptime. No Problems with 4.0. Is this a known issue? I found only one relevant posting http://archives.neohapsis.com/archives/openbsd/2007-06/0744.html but this guy reported no carrier. Any ideas? # ifconfig sk0 sk0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:0c:6e:d8:b0:d8 media: Ethernet 100baseTX full-duplex status: active inet6 fe80::20c:6eff:fed8:b0d8%sk0 prefixlen 64 scopeid 0x1 I noticed that the full-duplex light on the switch is flashing, but trying to swith sk0 ti half-duplex only resulted in: # ifconfig sk0 mediaopt half-duplex ifconfig: SIOCSIFMEDIA: Invalid argument But then again, automatic media selection worked without problems on 4.0. # uptime 4:59PM up 7 mins, 1 user, load averages: 1.45, 0.92, 0.44 # netstat -in NameMtu Network Address Ipkts IerrsOpkts Oerrs Colls lo0 33224 Link 254 0 254 0 0 lo0 33224 127/8 127.0.0.1 254 0 254 0 0 lo0 33224 ::1/128 ::1254 0 254 0 0 lo0 33224 fe80::%lo0/ fe80::1%lo0254 0 254 0 0 sk0 1500 Link 00:0c:6e:d8:b0:d8 214243 2540 204093 0 0 sk0 1500 fe80::%sk0/ fe80::20c:6eff:fe 214243 2540 204093 0 0 xl0 1500 Link 00:04:76:a0:43:bd26904 014979 0 0 xl0 1500 fe80::%xl0/ fe80::204:76ff:fe26904 014979 0 0 xl0 1500 192.168.34/ 192.168.34.100 26904 014979 0 0 pflog0* 33224 Link 0 0 5558 0 0 enc0* 1536 Link 0 00 0 0 vlan0 1500 Link 00:0c:6e:d8:b0:d898660 098595 0 0 vlan0 1500 fe80::%vlan fe80::20c:6eff:fe98660 098595 0 0 vlan0 1500 134.102.176 134.102.176.250 98660 098595 0 0 vlan1 1500 Link 00:0c:6e:d8:b0:d879384 083536 0 0 vlan1 1500 fe80::%vlan fe80::20c:6eff:fe79384 083536 0 0 vlan1 1500 134.102.186 134.102.186.20 79384 083536 0 0 vlan2 1500 Link 00:0c:6e:d8:b0:d8 8303 0 26 0 0 vlan2 1500 fe80::%vlan fe80::20c:6eff:fe 8303 0 26 0 0 vlan2 1500 172.21/16 172.21.1.88303 0 26 0 0 vlan3 1500 Link 00:0c:6e:d8:b0:d827716 021810 0 0 vlan3 1500 fe80::%vlan fe80::20c:6eff:fe27716 021810 0 0 vlan3 1500 192.168.33/ 192.168.33.250 27716 021810 0 0 vlan5 1500 Link 00:0c:6e:d8:b0:d8 186 0 135 0 0 vlan5 1500 fe80::%vlan fe80::20c:6eff:fe 186 0 135 0 0 vlan5 1500 192.168.32/ 192.168.32.250 186 0 135 0 0 tun01500 Link 0 00 0 0 tun01500 10.8.0.1/32 10.8.0.1 0 00 0 0 OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 2.60GHz (GenuineIntel 686-class) 2.61 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem = 1072459776 (1047324K) avail mem = 971186176 (948424K) using 4278 buffers containing 53747712 bytes (52488K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 12/12/03, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xf04a0 (68 entries) bios0: ASUSTeK Computer Inc. P4P800 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5100/256 (14 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801EB/ER LPC rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc/0xc000 0xcc000/0x800 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 82865G/PE/P CPU-I/0-1 rev 0x02 ppb0 at pci0 dev 1 function 0 Intel 82865G/PE/P CPU-AGP rev 0x02 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 ATI Rage 128 Pro TF rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 29 function 0 Intel 82801EB/ER USB rev 0x02: irq 10 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 Intel 82801EB/ER USB rev 0x02: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub,
