Re: IDE Problem
Sandy Pleyte wrote: Hi, I recently bought an ATA-IDE + RS232C cartridge, but I think it doesn't work, or maybe I need a HowTo manual. When I start my MSX TR ST with the cart in slot 1 it detects my HD, then it's loading MSX DOS 2.30 (same version as my msx-dos kernel). When I try to load idefdisk.com it say's: No IDE system installed during startup! probably because no valid partitions were found on the hd. Press DEL key during startup when you want to format a hd for the first time. (see IDE201.TXT) greetinx, jon Problems? contact [EMAIL PROTECTED] See also http://www.faq.msxnet.org/
Re: IDE-problem
Anne: p.s. This is getting very kewl!! An MSXturboR GT with 1024kB, 160MB SCSI-HD, IDE-ZIP, IDE-CDromdrive, 33k6modem via RS232, OPL4, V9990 and MSX-MUSIC/AUDIO:) *DROOL* :-).. Eric (8250+1MB+7MHz, 32MB HDD, ZIP, Mus/Aud) MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE-problem
On 5/5/99 22:31 Anne de Raad wrote: But now what happens?!!? My turboGT boots in the TAPEBasic (so to speak)And I absolutely don't press SHIFT, which has the same effect... In this BASIC the floppydrive is NOT there, 'files' just gives an illegal function call and here I sit with nothing.. I had the same problem with a HD using an IDE with 74LS04 chip. However with the new version (that includes 74HCT04 chip) not problem found! Your IDE interface has 74LS04 or 74HCT04 chip? BUT!! When I insert my slotexpander in slot 2 and the first subslot my SCSI-interface and I boot, again the IDE-interface finds in Master a CDROMdrive, in Slave nothing, then the SCSI-interface takes over and DOES find my HDCOOL.Then booting is absolutely normal and also my Floppydrive is found... I have some problems using the CIEL 4 slot-expander on TR. 'Old' versions of IDE interface doesn't work on slot-expander inserted on slot 2. If I put the slot-expander into slot 1, then I got 'not enough memory' Now, with the new version (74HCT04) the IDE interface works fine ONLY if I insert the expander into slot 1 of TurboR Regards, --- CLUB HNOSTAR MSX Email: [EMAIL PROTECTED] http://www.ctv.es/USERS/hnostar/ Last update: 18 March 1999 ICQ Number: 25855133 Spanish HNOSTAR MSX Magazine Editors HNOSTAR 42 is our latest number --- MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE-problem
I had the same problem with a HD using an IDE with 74LS04 chip. However with the new version (that includes 74HCT04 chip) not problem found! Your IDE interface has 74LS04 or 74HCT04 chip? I just bought my IDEinterface in Tilburg at the SUNRISE-stand.. I can believe they sell the NEWEST version, don't they?!!? I have some problems using the CIEL 4 slot-expander on TR. 'Old' versions of IDE interface doesn't work on slot-expander inserted on slot 2. If I put the slot-expander into slot 1, then I got 'not enough memory' Now, with the new version (74HCT04) the IDE interface works fine ONLY if I insert the expander into slot 1 of TurboR Well, I don't know. At least thanks for your help and suggestions!! I will see which version of the IDE I have. Although I can't imagine they sold me an old interface.. Greetz, Anne MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE-problem
Cool isn't it ? :) It is!! ^-^ normal if there is no slave cdrom Yep, you are right again, when I have my ZIP as master and CDROM as slave, it works..thanx again Jon!! Greetz, Anne p.s. This is getting very kewl!! An MSXturboR GT with 1024kB, 160MB SCSI-HD, IDE-ZIP, IDE-CDromdrive, 33k6modem via RS232, OPL4, V9990 and MSX-MUSIC/AUDIO:) MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE-problem
I checked it, but I couldn't find any error! You were right after all, it was a matter of Master and Slave.. My ZIPdrive works just fine now!! Thanx!! I do have another problem right now...Of course it probably is just as easy to solve, I can't help I am such an ass.. :) I have connected ONLY a cdromdrive to my IDE right now... The CDROMdrive is on Master, Slave is empty... My IDE interface is in slot 1. When I boot my computer, it finds a CDROMdrive in master, Slave nothing found So far, everything normal, I guess.. But now what happens?!!? My turboGT boots in the TAPEBasic (so to speak)And I absolutely don't press SHIFT, which has the same effect... In this BASIC the floppydrive is NOT there, 'files' just gives an illegal function call and here I sit with nothing.. BUT!! When I insert my slotexpander in slot 2 and the first subslot my SCSI-interface and I boot, again the IDE-interface finds in Master a CDROMdrive, in Slave nothing, then the SCSI-interface takes over and DOES find my HDCOOL.Then booting is absolutely normal and also my Floppydrive is found... Okay, what to do now?! Try the UTILITIES John supplied for handling the CDROMdrive!! But DAMNED, it does NOT work They are all called JDSxxx.xxx etc. etc. and they all do NOTHING AT ALL.I can press the PAUSE-key, so my system is not completely DEAD but I can't do anything anymore.Resetting is the only option left... What on earth am I doing WRONG here..Please help. Anne de Raad p.s. I bought the interface on Tilburg, last 24th of April I downloaded the utils from the SUNRISE-site I have the newest BIOS (1.91) in the FLASHROM. Thanx in advance!! If I insert the IDE interface in slot 2, it has the same effect.. MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE-problem
On Wed, 5 May 1999, Anne de Raad wrote: I checked it, but I couldn't find any error! You were right after all, it was a matter of Master and Slave.. My ZIPdrive works just fine now!! Thanx!! Cool isn't it ? :) I do have another problem right now...Of course it probably is just as easy to solve, I can't help I am such an ass.. :) I have connected ONLY a cdromdrive to my IDE right now... The CDROMdrive is on Master, Slave is empty... My IDE interface is in slot 1. When I boot my computer, it finds a CDROMdrive in master, Slave nothing found So far, everything normal, I guess.. But now what happens?!!? My turboGT boots in the TAPEBasic (so to speak)And I absolutely don't press SHIFT, which has the same effect... In this BASIC the floppydrive is NOT there, 'files' just gives an illegal function call and here I sit with nothing.. that is strange; I will take at look at that situation. BUT!! When I insert my slotexpander in slot 2 and the first subslot my SCSI-interface and I boot, again the IDE-interface finds in Master a CDROMdrive, in Slave nothing, then the SCSI-interface takes over and DOES find my HDCOOL.Then booting is absolutely normal and also my Floppydrive is found... Okay, what to do now?! Try the UTILITIES John supplied for handling the CDROMdrive!! But DAMNED, it does NOT work They are all called JDSxxx.xxx That is normal; the JDSxxx.xxx programs are betaversions; patched versions of the old gilvad utilities to make use of the internal ATAPI driver of the bios. It was not my intention to spread them, but Sunrise did because these programs are working properly. BUT like the original gilvad utilities they will only work for slave CDROMs. etc. etc. and they all do NOTHING AT ALL.I can press the PAUSE-key, so my system is not completely DEAD but I can't do anything anymore.Resetting is the only option left... normal if there is no slave cdrom CU Jon MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE-problem
Anne de Raad wrote: this is strange. I guess I made an error in the bios when pressing CTRL; I suppose the bios returns too early before installing the appropriate parameter in SLTWRK. I'll check it out and fix it in bios 1.92. Sorry! jon I checked it, but I couldn't find any error! Is there any other diskinterface in your computer? If this other interface uses all driveletters, the IDE won't be able to install itself. Is the detection of your IDE device(s) ok at startup? (so: IDE Master: Iomega ZIP... IDE Slave: not detected) If there is an error (like: IDE slave failure!) , the whole thing will abort and the IDE system will not be installed. Hello Jon, Nice to get a reaction from you! And thanx for the fast answer! Maybe it helps to say that I work on an MSXturboR GT..I have tried it a few times again, but it doesn't work in any way, it doesn't matter if I put the ZIP-drive in Slave or Master or whatever, it does not work yet... the ZIP drive I've used had some weird jumpers: I had to set the jumper on 'SCSI address setting 1' to configure the device as IDE master and on 'SCSI address setting 2' for IDE slave. First make sure the device detection goes fine at startup. CU MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE-problem
this is strange. I guess I made an error in the bios when pressing CTRL; I suppose the bios returns too early before installing the appropriate parameter in SLTWRK. I'll check it out and fix it in bios 1.92. Sorry! jon Hello Jon, Nice to get a reaction from you! And thanx for the fast answer! Maybe it helps to say that I work on an MSXturboR GT..I have tried it a few times again, but it doesn't work in any way, it doesn't matter if I put the ZIP-drive in Slave or Master or whatever, it does not work yet... I DO use v1.91, I downloaded it from SunriseSwiss (or whatever these guys are called nowadays ^-^).. Greetz and looking forward to v1.92 Anne MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE-problem
On Thu, 29 Apr 1999, Anne de Raad wrote: Hello, On the Tilburgfair I bought the IDE-interface from SunriseI flashed the latest BIOS in the cartridge (1.91) and I connected the IDE-interface to my I believe Sunrise has distributed still the 'old' bios 1.86 in Tilburg on the softwaredisk. So make sure you really got 1.9x ZIPdrive in my pc. I inserted a blank ZIPdisc and I wanted to create some partitions on it.. But I can't get this done. I want to boot idefdisk from my diskdrive, but the IDE system has to be installed to be able to partition Okay, the manual says keep pressing CTRL during startup. The IDE system will load but no driveletters are assigned. ok. this is all normal. there will be booted from floppy. I have tried this many times, but nothing works. When I startup with CTRL and I try to start idefdisk from floppy, the program says No IDE system installed during startup! The IDE bios should be at least version 1.9! this is strange. I guess I made an error in the bios when pressing CTRL; I suppose the bios returns too early before installing the appropriate parameter in SLTWRK. I'll check it out and fix it in bios 1.92. Sorry! jon Well, I don't know what to do!! In this case I can never create an MSXpartition on one of my ZIPdiscs, it is simply impossible to use idefdisk this way Please help!! Greetz, Anne de Raad MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/) MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
About IDE... want more IDE problems? From DOS, do BASIC file.bas. If file.bas do not exist, system crashes! Today we find problems even doing just a _RAMDISK. It all works fine with my setup; and I got never any complaints about such errors. Probably there is something wrong with your memorymapper?? Well, I have not IDE, I saw this in the computer of a friend (a ST) without external mapper. probably your routine doesn't work correctly and corrupts the IDE workarea allocated in page 3. But NestorBASIC page 3 usage is only a small area reserved with CLEAR... With MegaSCSI, I never had ANY problem. I don't know, but perhaps MegaSCSI doesn't need any space in page3 (?where are the DPB's located then???) and uses sram or so. In that case a possible bug in your 'free BASIC memory' routine is not visible. Or perhaps MegaSCSI workarea is not as 'sensitive' to data corruption. Well, if NestorBASIC corrupts IDE space in page 3, it is because this space is not protected... so it is the fault of IDE software... - Konami Man - AKA Nestor Soriano (^ ^)v - Itsumo MSX user http://www.geocities.com/SiliconValley/Bay/9797/msx.htm [EMAIL PROTECTED] ICQ#: 18281450 Please don't send me messages with HTML code "New Pentium 34. Obsolete in 2 months. Guaranteed!" - MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
On Sun, 21 Feb 1999, Konami Man wrote: About IDE... want more IDE problems? From DOS, do BASIC file.bas. If file.bas do not exist, system crashes! Today we find problems even doing What? It don't happens with my IDE. Perhaps with the news BIOS (I am using v1.86) this problem you say above is patched. But the very very worst thing is that... IDE interface give problems when using NestorBASIC!! X-) Seriously, the following sequence hangs computer X"DDD I am a user of NestorBasic, because a often use NestorPlayer. :) Let's see if it's true that this sequence hangs my machine... BLOAD"nbasic.bin",r ?USR(0) 'Uninstalls (just restore interrupts and free BASIC and mapped memory) _SYSTEM BASIC _SYSTEM [A minute later] Well, here is my MSX with IDE interface, and it is completely normal. My MSX is not hunged Sorry, but this problems you say, actually aren't true. Perhaps, at the beginning, with old bios it worked. With MegaSCSI, I never had ANY problem. So, to spy the design methods of ESE is maybe a very good idea... Sure!. In my poor opinion, the only problem I see to the IDE is the image-disk launcher And of course, a MSXCDEX for IDE is very very necessary. By the way, I think that I forget a disk with moosound musics in your room (in "fumen") last Barlelona fair, isn't true? :) Bye. MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE problem
A program to emulate diskimages on IDE harddisk?? Can you mail it to me? Thanks, Jon about MSXCDEX for IDE: I'll try to convert the SCSI version if I have the time. Is there any sourcecode available of the SCSI version? Is there any information available about the entries in the SCSI bioses? MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
Konami Man wrote: ... About IDE... want more IDE problems? From DOS, do BASIC file.bas. If file.bas do not exist, system crashes! ???! Today we find problems even doing just a _RAMDISK. ???! It all works fine with my setup; and I got never any complaints about such errors. Probably there is something wrong with your memorymapper?? BTW are you using a hardware-modified IDE interface? Otherwise you can encounter all kinds of busproblems/datacorruption, especially if there is other hardware (like memorymapper!!) plugged into the msx. (More info about this modification through Manuel's faq; last revision 24 Jan.99) But the very very worst thing is that... IDE interface give problems when using NestorBASIC!! X-) Seriously, the following sequence hangs computer with IDE but not without it: BLOAD"nbasic.bin",r ?USR(0) 'Uninstalls (just restore interrupts and free BASIC and mapped memory) probably your routine doesn't work correctly and corrupts the IDE workarea allocated in page 3. _SYSTEM BASIC _SYSTEM I just can't imagine why this happens!! With MegaSCSI, I never had ANY problem. I don't know, but perhaps MegaSCSI doesn't need any space in page3 (?where are the DPB's located then???) and uses sram or so. In that case a possible bug in your 'free BASIC memory' routine is not visible. Or perhaps MegaSCSI workarea is not as 'sensitive' to data corruption. Greetz, Jon MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
There is only one person who has a Bert version 3.0, Rinus Stoker. I think he will be the onlyone using it, since I don't hear anything from Hans Oranje anymore. I hope he will finish it (it isn't finished yet, Rinus will probably have a prototype). FYI: Hans is still active... btw: the bert 3.0 has a hardware modification in comparison to the bert 2.7 Yeah, that's really too bad. I hope he can modify my v2.7 for not too much money when it's finished... Well anyway I think I still had to buy a Bert interface because Novaxis is very hard to find and I have never heard of a Dutch Mega-SCSI-distributor either. Besides, Bert is a lot cheaper than Mega-SCSI... you are right about both. ASbout novaxis: I bought my Bert interfaces when they just came available, and also with novaxis, so no problem here. I also got my megascsi when these japanese guys were at tilburg, for a couple of years. You can order it in Japan, but as you already said, it is very expensive... Glad I am right :) ~Grauw MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Fwd: Re: IDE Problem
On 24 Feb 1999 08:15:09 +0100, in local.msx.int [EMAIL PROTECTED] (Maico Arts) wrote: Hello Since when is Sunrise Distributor in Holland? greetings -+-+-+-+-+-+- Since end of 1998 Greetings Peter MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
is this problem also known with the Bert SCSI interface ?? IS there a problem with the Bert SSI-interface??? just one problem I think: it is very slow... Hm... Yeah I know that. In a test in MCCM Bert v2.8 was tested and it was the fastest interface. So I bought Bert v2.7, I thought it was the same as v2.8... Well later on I heard it was not. Bert v2.8 was never released... There is only one person who has a Bert version 3.0, Rinus Stoker. I think he will be the onlyone using it, since I don't hear anything from Hans Oranje anymore. btw: the bert 3.0 has a hardware modification in comparison to the bert 2.7 Well anyway I think I still had to buy a Bert interface because Novaxis is very hard to find and I have never heard of a Dutch Mega-SCSI-distributor either. Besides, Bert is a lot cheaper than Mega-SCSI... you are right about both. ASbout novaxis: I bought my Bert interfaces when they just came available, and also with novaxis, so no problem here. I also got my megascsi when these japanese guys were at tilburg, for a couple of years. You can order it in Japan, but as you already said, it is very expensive... greetings -+-+-+-+-+-+- Maico Arts Isabella van Portugalstraat 9 5346 PJ OSS the Netherlands tel: +31-412-690757 fax: +31-412-690432 [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] (using just one address is enough) -+-+-+-+-+-+- MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
Die Distributor der MEGA-SCSI in Holland ist: Stichting Sunrise Rob Hiep Daltonstraat 51 2561 SR Den Haag Gruss Peter MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
is this problem also known with the Bert SCSI interface ?? IS there a problem with the Bert SSI-interface??? just one problem I think: it is very slow... Hm... Yeah I know that. In a test in MCCM Bert v2.8 was tested and it was the fastest interface. So I bought Bert v2.7, I thought it was the same as v2.8... Well later on I heard it was not. Bert v2.8 was never released... Well anyway I think I still had to buy a Bert interface because Novaxis is very hard to find and I have never heard of a Dutch Mega-SCSI-distributor either. Besides, Bert is a lot cheaper than Mega-SCSI... ~Grauw MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
is this problem also known with the Bert SCSI interface ?? IS there a problem with the Bert SSI-interface??? just one problem I think: it is very slow... greetings -+-+-+-+-+-+- Maico Arts Isabella van Portugalstraat 9 5346 PJ OSS the Netherlands tel: +31-412-690757 fax: +31-412-690432 [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] (using just one address is enough) -+-+-+-+-+-+- MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
is this problem also known with the Bert SCSI interface ?? IS there a problem with the Bert SSI-interface??? I had a Bert before having MegaSCSI, and an instruction such COPY"a:\dir\file.scx"TO(0,0) did not work!! And BTW, the kernel installer program of MegaSCSI (mginst.com) gives a "Invalid DOS kernel" error when trying to install a kernel captured from a Bert... About IDE... want more IDE problems? From DOS, do BASIC file.bas. If file.bas do not exist, system crashes! Today we find problems even doing just a _RAMDISK. But the very very worst thing is that... IDE interface give problems when using NestorBASIC!! X-) Seriously, the following sequence hangs computer with IDE but not without it: BLOAD"nbasic.bin",r ?USR(0) 'Uninstalls (just restore interrupts and free BASIC and mapped memory) _SYSTEM BASIC _SYSTEM I just can't imagine why this happens!! With MegaSCSI, I never had ANY problem. So, to spy the design methods of ESE is maybe a very good idea... - Konami Man - AKA Nestor Soriano (^ ^)v Itsumo MSX user [EMAIL PROTECTED] http://www.geocities.com/SiliconValley/Bay/9797/msx.htm Test NestorBASIC!! *** Windows emulator for MSX error #34: *** No failures, System works!! - MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
hi all, is this problem also known with the Bert SCSI interface ?? IS there a problem with the Bert SSI-interface??? ~Grauw MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
-Oorspronkelijk bericht- Van: Jon De Schrijder [EMAIL PROTECTED] Aan: [EMAIL PROTECTED] [EMAIL PROTECTED] Datum: dinsdag 9 februari 1999 13:51 Onderwerp: Re: IDE Problem On Tue, 9 Feb 1999, Marco Casali wrote: Hi boyz! A friend of mine use the new IDE (Ver.1.8) with an 8280. All is ok since he use the External Expansion Memory. When he adds it the MSX stop. Why? Someone know the possible solution? If the IDE-interface hasn't been modified as explained in the IDEFIX.TXT file, you may encounter all kinds of problems with it. Especially if you plug in too many hardware (like your memorymapper). The IDEFIX.TXT file can be found through the msxfaq. http://www.faq.msxnet.org and look for the IDE chapter. Jon PS Last version of the IDEFIX.TXT file was uploaded at 24th of January. No changes have been made since. With this modification all IDE-devices will work ok. hi all, is this problem also known with the Bert SCSI interface ?? gtx, Dirk van der Well MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
Hello Bert SCSI has nothing to do with ide interface unless you want to combine a BERt with IDE. greetings -+-+-+-+-+-+- Maico Arts Isabella van Portugalstraat 9 5346 PJ OSS the Netherlands tel: +31-412-690757 fax: +31-412-690432 [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] (using just one address is enough) -+-+-+-+-+-+- MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
-Oorspronkelijk bericht- Van: Maico Arts [EMAIL PROTECTED] Aan: [EMAIL PROTECTED] [EMAIL PROTECTED] Datum: donderdag 11 februari 1999 21:35 Onderwerp: Re: IDE Problem Hello Bert SCSI has nothing to do with ide interface unless you want to combine a BERt with IDE. greetings -+-+-+-+-+-+- Maico Arts Isabella van Portugalstraat 9 5346 PJ OSS the Netherlands tel: +31-412-690757 fax: +31-412-690432 [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] (using just one address is enough) -+-+-+-+-+-+- Hi, Ok, then i guess that answere's my question. No problem then. thanx Dirk van der Well Bbs Enterprise : sa-thu 21-05 0104422053 ( Netherlands ) [EMAIL PROTECTED] MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Re: IDE Problem
On Tue, 9 Feb 1999, Marco Casali wrote: If the IDE-interface hasn't been modified as explained in the IDEFIX.TXT file, you may encounter all kinds of problems with it. Especially if you plug in too many hardware (like your memorymapper). The ide are upgraded with this kind of modification, they work with bios 1.8 be sure you use the last modification description (with the HCT chip) (24jan99) Anyway: to check if it is a software or a hardware problem: put the mapper in and start your msx with INS pressed. In this way the idebios is skipped. And then start some program to test your memorymapper (if the msx hasn't already crashed because of hardware problems) MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
