Re: [RBW] Re: Ron's Ortho... stem question

[scott minor]

I've been happy with a 120mm lugged stem w Orthos on my 62cm Atlantis. 
 Sometimes when I'm jumping on the bike quickly I get the feeling my bars 
just slipped downward but actually they just flexed!  So the stem is 
grabbing pretty well to not slip in this scenario.  The stem has pronounced 
rigidity as well so the flex is limited to the bars.  I'd think the Ritchey 
force would behave the same way, which in my view is a pretty nice balance 
when it comes to Orthos.  
On Saturday, March 30, 2024 at 3:20:24 AM UTC-4 Dan wrote:

> Chris, can I ask how this ended up working for you? If so, what shim did 
> you use?
>
> I've set up my Appaloosa with the Orthos and a 120mm VO single-bolt 26.0mm 
> stem.
> The comfort and control is FANTASTIC, but I can make the bars slip if I 
> push down on them hard. So far it hasn't happened while riding, but it 
> makes me feel a little uneasy that it might be possible.
>
> I'm wondering if I need to go for a 31.8mm Nitto faceplater or, *gasp*, a 
> threadless adapter and threadless stem :S
> On Wednesday 13 March 2024 at 09:07:59 UTC+10:30 Chris K wrote:
>
>> Again, thanks much for all the replies and info. I think I'll get the 135 
>> Faceplater. The reason for getting the Nitto Riv version instead of one of 
>> these awesome Ritchie's is I need the extra height.
>>
>> FWIW, Ron says a 25.4 clamp works with the 26.0 bar if you pry it open 
>> just a touch to fit it in. Bit of a hack I suppose, but I'm gonna give it a 
>> shot.
>>
>> On Tue, Mar 12, 2024 at 3:27 PM Brian McDermott  
>> wrote:
>>
>>>
>>> I went from Billies to orthos on my Appaloosa, had to go from a 120 to 
>>> 130 for the extra sweep. Finding a suitable 26.0 stem was a challenge, 
>>> ended up with a Miyata pantographed stem from eBay.
>>> On Sunday, March 10, 2024 at 10:03:24 AM UTC-7 Chris K wrote:
>>>
 Hey all, I've got some Ortho Bars in my cart and looking for stem 
 advice from those who use this bar. Obv there are multiple fit and frame 
 factors that play into something like this, but curious what people are 
 generally going with. Here are the options I'm deciding between:

 - Faceplater 110mm
 - Faceplater 135mm
 - Tallux 12cm

 Will the 110 Faceplater be too short?

>>> -- 
>>> You received this message because you are subscribed to a topic in the 
>>> Google Groups "RBW Owners Bunch" group.
>>> To unsubscribe from this topic, visit 
>>> https://groups.google.com/d/topic/rbw-owners-bunch/jb9Wk8SvPTU/unsubscribe
>>> .
>>> To unsubscribe from this group and all its topics, send an email to 
>>> rbw-owners-bun...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/rbw-owners-bunch/7d92b563-9594-4504-8e0d-77722a7fa31en%40googlegroups.com
>>>  
>>> 
>>> .
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/38edc303-0e58-4724-bad9-e68fb96bc02bn%40googlegroups.com.

[RBW] FS: Nitto 34f front rack 700c

[scott minor]

New condition with original unused hardware

size:  700c wheels

$175 shipped in lower 48

flickr photo here:  https://flic.kr/p/2prSs8g

located in VA




-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/3dc8c4f9-a7c1-4277-b20c-a0c6bf2b967en%40googlegroups.com.

[RBW] Re: A. Homer Hilsen fender clearance

[scott minor]

My AHH is an older Toyo frame and it fits 52mm fenders no problem.  No need 
for dimpling or anything.  I would think the fenders you have in mind would 
work very well.  

On Tuesday, November 7, 2023 at 11:31:02 PM UTC+2 Ryan Ray wrote:

> Does anyone have first hand experience with fitting fenders in their 
> Hilsen? I was hoping for 700x50mm Stainless Berthouds but as I need to oder 
> them from EU I was hoping to see if anyone has tried it first. Or another 
> fender combo work well? I have the R559s but I will switch brakes if I have 
> to!
>
> - Ryan
>
>
> P.S. First Riv since I bought a Rambo off this list many years ago
>
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/9a436d59-0a7d-4582-9924-397070f5ae9bn%40googlegroups.com.

[RBW] FS: Nitto, IRD Cafam, Brooks

[scott minor]

Passing some items along..

Nitto Albatross 31.8 clamp, 56cm width, heat treated aluminum.  A stiffer, 
slightly wider version of a classic, compatible w bar-end shifters. $100

Nitto Fillet face-plater quill stem.   135mm reach (120-ish actual, 
adjusting for angle), 225mm length quill, 31.8mm clamp.   Has some light 
insertion marks not visible in photo.
$110

Brooks Cambium C19 wide saddle, tan, has aluminum frame, silver rails.  $50

IRD Cafam II cant brakes, silver, front and rear new in package with brake 
shoes and all hardware. $175 for the set

IRD Cafam silver/silver shortpull brake levers for cantis, center pull and 
road brakes new in package $85/pair

Full brake setups above w levers included $250 / free shipping

pictures here..  

https://www.flickr.com/photos/147564748@N06/sets/72177720311525455/

located in VA.

Thanks!  -Scott

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/60821a2a-2f8f-40ae-9da8-89a44a83efb5n%40googlegroups.com.

[RBW] Re: FS: Nitto R14, Nitto/Ocean Air Cycles Erlen racks

[scott minor]

All sold.  thanks!  

On Sunday, September 3, 2023 at 4:21:19 PM UTC-4 scott minor wrote:

> *Erlen sold*.  
>
> R14 available.
>
> Thanks!  
>
>
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/4e35d387-4708-476e-9f91-7591b9606ce0n%40googlegroups.com.

[RBW] Re: FS: Nitto R14, Nitto/Ocean Air Cycles Erlen racks

[scott minor]

*Erlen sold*.  

R14 available.

Thanks!  



-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/a7167cdb-1d09-47dc-ac76-8bf635c1b357n%40googlegroups.com.

[RBW] FS: Nitto R14, Nitto/Ocean Air Cycles Erlen racks

[scott minor]

Slimming down the rack collection.  

Nitto R14 used, mounted once and ridden for about a year on a bike I no 
longer have.  No visible marks or flaws.  $120

Nitto / Ocean Air Cycles Erlen rear bag support,  never mounted, as new! 
 Still has the tag on it from 2017 or whenever it was I bought it.  Comes 
with single bolt for Nitto seat post.  $115

Located in VA.

Thanks!  -Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/0194f1f6-a03d-4169-ba6c-434a4a994ff8n%40googlegroups.com.

Re: [RBW] Summer Riding in Alberta

[scott minor]

Mack,   Nicely done!  Really enjoyable to watch and listen.  (no music, 
yay!)

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/e634b3e6-31a8-4d57-9da4-592c1538db6an%40googlegroups.com.

Re: [RBW] Re: Alternatives to Snoqualmie Pass?

[scott minor]

I've been riding Snoqualnie Pass standard casings tubeless on my Homer with 
nary a flat until recently, and after the 3rd flat this summer I have 
retired them. They had a good life but now seem too worn to keep going 
reliably.  The rear eventually stretches a couple mm's in width over time 
which last year prompted a front/rear flip, but now both are stretched 
which might just be the tell tale sign they are done.  

Currently riding 38mm Gravel King SS (lighter than SK) in preparation for 
fender season (52mm fender max w center pull brakes) instead of Barlow 
pass, just to try them out.  I like them so far!  but already thinking I'll 
get another set of Snoqualmies next summer when the fenders come back off. 
 There's just nothing else like them that I have found...  They have just 
the right amount of air volume for my size (over 200 lbs) and suit the 
pressure I like to ride (44 psi), are very fast and quiet.  Might be my 
favorite tire for all around riding.


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/66d811a1-a07b-47e9-937e-1e50095b0c72n%40googlegroups.com.

[RBW] Re: WTT: Swift Panniers for Sackville HappiSack

[scott minor]

Jared, sent you an email..  

thanks!  

On Wednesday, August 16, 2023 at 9:33:48 PM UTC+3 jaredwilson wrote:

> $200 + ship
>
> On Tuesday, August 15, 2023 at 5:03:34 PM UTC-7 jaredwilson wrote:
>
>> Open to other colors, or other make/model medium-large bags.
>>
>> Thanks :)
>>
>> jared
>> On Sunday, August 13, 2023 at 9:04:32 AM UTC-7 jaredwilson wrote:
>>
>>> Will sell outright for what I paid, $220 + ship.
>>>
>>> NLA from Swift, super useful bags just overkill for what I have going on 
>>> right now.
>>>
>>> Thanks!
>>>
>>> On Saturday, August 12, 2023 at 5:20:13 PM UTC-7 jaredwilson wrote:
>>>
 Looking to trade my pair of like new Swift panniers for a Sackville 
 HappiSack.

 I purchased these from group member Ryan Frahm earlier this year in 
 like new condition and used (1) bag about twice. 

 Some cat hair and dust from sitting around, I'll lint roll them before 
 shipping out, otherwise they're pretty much perfect condition.

 Looking for a tan, khaki, or olive HappiSack in good condition, bonus 
 if it has matching kangaroo pouch.

 Please respond off list if interested, thanks :)

 jared in central CA

 [image: IMG_7216.jpg]

>>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/35c68133-f6e6-4d1f-a479-0b19d7f6c094n%40googlegroups.com.

Re: off-list- Re: [RBW] FS: 60cm Gus complete or F/F/HS

[scott minor]

Gus has a new home!  Had a nice 30+ mile ride with the new owner today.. 
 good times all around.

Thanks all, -Scott 

On Tuesday, July 25, 2023 at 10:32:06 PM UTC-4 Danny wrote:

> Hi Scott,
>
> Such a gorgeous bike/build, nice work! If I didn't already own an orange 
> Susie, I'd be mighty tempted.
>
> If someone buys just the F/F/HS instead of the complete, and you decide to 
> sell off the parts, just wanted to throw it out there that I'd be 
> interested in those Paul levers.
>
> Hope you're able to move it on as a complete, would be a shame to break up 
> such a nice build, but I get that folks wanna build up their own visions as 
> well.
>
> Take care,
> Danny
>
> On Sun, Jul 23, 2023 at 11:49 AM scott minor  wrote:
>
>> Parting w my 60cm (XL) Gus..  can sell complete or F/F/HS
>>
>> Complete bike $3200
>>
>> I bought the frame from Riv last year (last run).  It's a great riding 
>> bike.  Friction 2 x 10 drive train is super smooth.  Some specifics on 
>> components...
>>
>> Wheels are XTR hubs with Cliffhanger rims, hand built
>>
>> Drivetrain is Silver 32/22 crankset with external bottom bracket, XTR 
>> rapid rise rear derailleur with Shimano 10 speed cassette.  Silver2 
>>  shifters, friction shift w Riv thumb shifter mounts
>>
>> Paul motolight V-brakes with Paul Love levers
>>
>> Nitto S65 seat post, Not to 120mm faceplater stem with brass and steel 
>> spacers, Tosco 31.8 handlebars, Brooks B-17 carved saddle, VP pedals, 
>> removable ergo grips.  
>>
>> Located in VA
>>
>> pics here..
>>
>> https://flic.kr/s/aHBqjANohX
>>
>> thanks!  -Scott 
>>
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "RBW Owners Bunch" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to rbw-owners-bun...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/rbw-owners-bunch/04acda96-5cef-496f-ae7b-53598f31e1e3n%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/rbw-owners-bunch/04acda96-5cef-496f-ae7b-53598f31e1e3n%40googlegroups.com?utm_medium=email_source=footer>
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/60263237-fc31-4155-838f-7dabb2d9d4c0n%40googlegroups.com.

[RBW] FS: 60cm Gus complete or F/F/HS

[scott minor]

Parting w my 60cm (XL) Gus..  can sell complete or F/F/HS

Complete bike $3200

I bought the frame from Riv last year (last run).  It's a great riding 
bike.  Friction 2 x 10 drive train is super smooth.  Some specifics on 
components...

Wheels are XTR hubs with Cliffhanger rims, hand built

Drivetrain is Silver 32/22 crankset with external bottom bracket, XTR rapid 
rise rear derailleur with Shimano 10 speed cassette.  Silver2  shifters, 
friction shift w Riv thumb shifter mounts

Paul motolight V-brakes with Paul Love levers

Nitto S65 seat post, Not to 120mm faceplater stem with brass and steel 
spacers, Tosco 31.8 handlebars, Brooks B-17 carved saddle, VP pedals, 
removable ergo grips.  

Located in VA

pics here..

https://flic.kr/s/aHBqjANohX

thanks!  -Scott 


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/04acda96-5cef-496f-ae7b-53598f31e1e3n%40googlegroups.com.

[RBW] Re: FS: Fab's Fanny Waxed Cordura Olive Bag

[scott minor]

Fanny is sold.   thanks!

On Friday, July 21, 2023 at 3:33:19 PM UTC-4 scott minor wrote:

> Passing along a Fab's Fanny in good condition.  Waxed cordura material. 
>  Used only occasionally over the last year.
>
> $150 shipped 
>
> [image: IMG_4760.jpg]
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/bd96b2cd-973d-47c9-be95-2e019877ee81n%40googlegroups.com.

[RBW] FS: Fab's Fanny Waxed Cordura Olive Bag

[scott minor]

Passing along a Fab's Fanny in good condition.  Waxed cordura material. 
 Used only occasionally over the last year.

$150 shipped 

[image: IMG_4760.jpg]

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/9a123ad5-7273-422e-b345-252f9ad43b57n%40googlegroups.com.

Re: [RBW] Re: Roaduno

[scott minor]

All this talk of dropouts, Grant mentioned last week on a Path Less Pedaled 
YouTube video (around the 55min mark) that Roaduno will have  'rear facing 
dropouts of our own design'.  

On Tuesday, July 18, 2023 at 4:35:58 PM UTC-4 Edwin W wrote:

> Bill is right (as usual), the Public V1 is fun to ride. 
> My brother and his wife got them. I made a huge improvement (to me!) in 
> putting paselas on and switching the 18t rear cog to a 16.
>
> I love the simplicity of a single speed and hope to get a roaduno and 
> "fix" it up,
>
> Edwin
>
> On Monday, July 17, 2023 at 1:08:27 PM UTC-5 Bill Lindsay wrote:
>
>> There is no question there will be a Roaduno Complete in early 2024 that 
>> you will be able to purchase, and that bike will be both simple and a 
>> single speed.  
>>
>> Another bike that meets both those criteria (simple and singlespeed) is 
>> the Public V1.  
>> https://publicbikes.com/collections/single-speed-bikes/products/public-v1
>>
>> That's a simple, single speed bike.  I bet it would be pretty fun to 
>> ride.  
>>
>> Bill Lindsay
>> El Cerrito, CA
>>
>> On Monday, July 17, 2023 at 10:35:02 AM UTC-7 Dick Combs wrote:
>>
>>> I just want a simple, single speed bike 
>>>
>>> On Monday, July 17, 2023 at 1:19:54 PM UTC-4 iamkeith wrote:
>>>
 Changing subject slightly - there have been some comments worrying that 
 this will simply be a homer and the logical "why bother"  question 
 implied, 
 given that it's no longer a true single speed.  I have no inside 
 knowledge, 
 but suspect it will be different.  Specifically, I'd supect it to have a 
 higher bottom bracket than the homer, to accommodate those who want to use 
 it as a fixie. 

  The Quickbeam had a higher BB, and I can't help wonder if that's the 
 thing that made it's ride quality so magic and so unique compared to other 
 contemporary models.  (That was my riv era, so I also have a ram and a 
 saluki and, as similar as they are on paper, they just feel totally 
 different.) 

 My newer rivs are the long, hilli bike type (susie/clem) instead of the 
 road type.  Because those are what I prefer most of the time is why I was 
 excited about the first Roaduno concept /prototype.  But, since it's now 
 different, I just can't imagine it being less than a  improvement to the 
 QB/SO.   

 Like most, I tired of the single speed limitations, and have spent 
 years planning to add gears to my QB - via IGH in my case.  This is 
 despite 
 owning the Saluki and Ram.  It's just such a good ride, I can't imagine 
 getting rid of it.  The long winded point of this is that i totally 
 understand the addition of features for adding gears.  If the bike ends up 
 being a "keeper " most are going to get there eventually.

>>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/7a3e4031-cbdc-4c6f-9eb7-0d3389317560n%40googlegroups.com.

[RBW] Re: FS: RH/Compass Antelope Hill EL 700x55 / Honjo Smooth 74 fenders

[scott minor]

Fenders and tires are sold.thanks!  

On Tuesday, July 18, 2023 at 2:34:19 PM UTC-4 tob...@gmail.com wrote:

> I'm interested in the tires. Just sent you and email.
>
> On Tuesday, July 18, 2023 at 11:22:23 AM UTC-7 psc...@gmail.com wrote:
>
>> Passing along this pair of Compass Antelope Hill 700 x 55 Extra Light in 
>> very good condition.  Been on the shelf more than on the road.  No wear is 
>> visible on the center tread..  These were mounted tubeless in the past and 
>> as a result show some sealant residue.  
>> $80/pair
>>
>> Simworks by Honjo Smooth 74 Silver fenders NEW never mounted or taken out 
>> of plastic sleeves.  These will fit perfectly over the Antelope Hill tires 
>> and can be mounted on Clem or Gus/Susie.  I still have the original 
>> packaging from Simworks for easy shipping.   $170 
>>
>> Located in VA
>>
>> Thanks!  -Scott 
>>
>> (photo of smooth 74 on Clem from simworks website)
>>
>> [image: IMG_4717.jpg]
>>
>>
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/3baa8cb6-7686-4d65-97bd-75d513c9c6a3n%40googlegroups.com.

[RBW] Re: FS: Nitto face plater stem, Tektro R559 calipers, Fab's Abs X11 bag

[scott minor]

all items claimed..  

thank you!
On Saturday, July 8, 2023 at 7:41:49 PM UTC-4 eric...@gmail.com wrote:

> PM'd on the Fabulous Abs :)
>
> On Saturday, July 8, 2023 at 1:58:37 PM UTC-4 Tim Bantham wrote:
>
>> PM'd on the Tektro R559's
>>
>> On Saturday, July 8, 2023 at 11:35:28 AM UTC-4 psc...@gmail.com wrote:
>>
>>> A few items for sale in nice shape..
>>>
>>> -Nitto tig'd face plater stem 60mm / 31.8 bar clamp - no scratches   
>>> $100 shipped
>>>
>>> -IRD Heron tig'd face plater stem 100mm / 31.8 bar clamp - a few 
>>> insertion marks - $70 shipped
>>>
>>> -Tektro R559 brake set (recessed allen) one bike's worth. $60 shipped
>>>
>>> -Ron's Fab's Abs X11 tan handlebar bag - very light!  barely used $85 
>>> shipped
>>>
>>> Located in VA
>>>
>>> photos here..
>>>
>>> https://www.flickr.com/gp/147564748@N06/upJ2287115
>>>
>>> thanks!  -Scott 
>>>
>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/716d0d7a-f6bf-4752-abe3-7db84e0612a8n%40googlegroups.com.

[RBW] FS: Nitto face plater stem, Tektro R559 calipers, Fab's Abs X11 bag

[scott minor]

A few items for sale in nice shape..

-Nitto tig'd face plater stem 60mm / 31.8 bar clamp - no scratches   $100 
shipped

-IRD Heron tig'd face plater stem 100mm / 31.8 bar clamp - a few insertion 
marks - $70 shipped

-Tektro R559 brake set (recessed allen) one bike's worth. $60 shipped

-Ron's Fab's Abs X11 tan handlebar bag - very light!  barely used $85 
shipped

Located in VA

photos here..

https://www.flickr.com/gp/147564748@N06/upJ2287115

thanks!  -Scott 


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/e4ec162f-350b-46f6-ad6c-b9b10a01aaf7n%40googlegroups.com.

[RBW] Re: Fendering My Atlantis

[scott minor]

I have a set of smooth 74's in my shop for another bike (not yet fitted) 
and holding them up to my Atlantis, they don't fit without cutting and 
 heavily dimpling the fenders to fit between seat stays, also fork blades, 
and remove fender material around the chain stays.  Not for the faint of 
heart but looks possible with patience and proper jigs for setting the 
dimples just right.  There's little question that the fenders will fit over 
your tires, but on an Atlantis, it will take some work.  The problem I 
would worry about is this, by the time you dimple the fender enough to fit, 
you may have lost your clearance around the tire at those points.  If you 
remove metal at those edges where it is too tight then the structure of the 
fender is seriously compromised.  I'd go with a smooth 62 fender and 50mm 
tire on Atlantis and save the 74's w 2.25 tires for a bike with more 
clearance (like a Clem).  

On Thursday, January 12, 2023 at 1:21:11 AM UTC-5 Luke Hendrickson wrote:

> Kim! Fantastic news. I had hoped the smooth would be operable as they look 
> to have better coverage than the Flat 80. I appreciate the help here! 
> Ordering pronto. 
>
> On Wednesday, January 11, 2023 at 7:59:09 PM UTC-8 krhe...@gmail.com 
> wrote:
>
>> Kevin Purcell is co-owner of Golden Pliers in Portland, Oregon. ...left 
>> this out.
>>
>> Kim.
>>
>> On Wednesday, January 11, 2023 at 7:51:08 PM UTC-8 Kim Hetzel wrote:
>>
>>> Hi Luke,
>>>
>>> On my Clem Smith Jr. "L" bike, I am running a pair of Schwalbe Rapid Rob 
>>> 29x2.25 ". As one of my last upgrades for my bike are the SimWorks Honjo 
>>> Smooth 74 steel fenders as yet to be.   
>>>
>>> Before I came confident in a decision about which fenders I should buy 
>>> for my bike, I had emailed Steve Smith, the General Manager at SimWorks in 
>>> Portland, Oregon. He said that the Smooth 74s' would work. Steve referred 
>>> me to Kevin, who owns an orange Rivendell Clementine bike. Kevin's bike has 
>>> the Honjo Smooth 74 fenders. He had to modify the rear fender; cutting out 
>>> a section for clearance for the chain above the chain stay. See attached 
>>> pictures. I did not ask at the time what size tires Kevin is running on his 
>>> bike. I was more concerned about what shim size I needed for a 27.2mm seat 
>>> post for my Clem. 
>>>
>>> All in all, I can say that the Honjo Smooth 74 fenders with accommodate 
>>> 29x2.25" or 57.15mm tires. In the description of the those fenders on the 
>>> SimWorks website, the maximum tire size is 58~mm. 
>>>
>>> Hope this helps and not to confuse you.
>>>
>>> Kim Hetzel
>>> Yelm, WA 
>>>
>>> ..changing out my chain and rear derailleur to new.
>>>
>>>
>>> On Wednesday, January 11, 2023 at 7:00:16 PM UTC-8 Luke Hendrickson 
>>> wrote:
>>>
 Or even a Smooth 74?

 On Wednesday, January 11, 2023 at 6:38:49 PM UTC-8 Luke Hendrickson 
 wrote:

> Hey all! I just swapped out my beefy Maxxis tires for some 2.25” 
> Schwalbe Allround tires. Would I be able to get by with the SimWorks x 
> Honjo Flat 65? Or would I need the Flat 80? And how’s the fit? Any input 
> much appreciated.
>


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/52697247-f3a6-4369-be1e-de0c410c9eban%40googlegroups.com.

[RBW] Re: FS: Nitto / Simworks Rumble bars

[scott minor]

SOLD

many thanks!

On Wednesday, January 11, 2023 at 10:57:08 AM UTC-5 scott minor wrote:

> Simworks / Golden Pliers collab, these sold out really quickly.  Offering 
> them here after finding them too wide for my purposes.  There are some 
> faint marks around the clamp area but otherwise condition is like-new.   
> 71cm wide, 31.8 clamp
>
> $120 shipped 
>
> Located in VA[image: rumble2.jpeg]
> [image: rumble1.jpeg]
>
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/915b8012-5595-46fe-995d-69dfc53680a8n%40googlegroups.com.

[RBW] For Sale: Nitto, VO, Riv Silver, Cambium

[scott minor]

Some items for sale:

Nitto 177 Noodle handlebar - heat treated 48cm width / 26.0 clamp. $85

Rivendell Tosco handlebar - 65cm width / 31.8 clamp. $60

VO Klunker handlebar - Nickel 68cm width / 25.4 clamp. $50

Brooks cambium C19 saddle - wider version of standard c17 - Natural color. 
$70

Silver R559 side-pull brake set w recessed allen - $60. (currently out of 
stock at Riv)

Silver 2 shifters (new in package) - one 'X' and one 'O' version - $35 ea - 
free shipping

Silver shifter mounts for thumb shift (new in package) - two 'X' version 
(Riv right) - $45 ea (currently out of stock at Riv)  - free shipping

pictures here: 
 https://www.flickr.com/photos/147564748@N06/sets/72177720304560128/


Located in VA

Accepting PayPal F or Venmo

As for shipping, very reasonable shipping charges.. (small parts are free 
ship, and basically splitting shipping cost with buyer for bigger items 
like bars and saddle), and I have boxes for handlebars already which makes 
it pretty easy to offer these bars for sale.  

Thanks!  -Scott 


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/0fb98b7c-1be8-4584-a8a5-903391f688ban%40googlegroups.com.

[RBW] Re: Stem Length and Handlebar Width

[scott minor]

If you like the reach with 9cm stem, I would just swap out the 48's for the 
54's.. not a huge difference in width (1 inch per side?).   In fact, I just 
made this exact switch about a month ago on my 65cm Homer and kept the same 
stem with no ill effects.  I think this 54 noodle bar strikes a real sweet 
spot for taller riders like myself who don't necessarily need the full-on 
wide wide options that have become so popular.  
On Monday, December 5, 2022 at 3:52:45 PM UTC-5 Joe Bernard wrote:

> I'd be inclined to try the stem you have first IF you hadn't mentioned it 
> already feels a smidge long to you. In this case it's probably not worth 
> sliding your brand new bars through a stem you're very likely not going to 
> be happy with, then do it again. I'd get something 2cm shorter at least. 
>
> On Monday, December 5, 2022 at 11:07:45 AM UTC-8 bjmi...@gmail.com wrote:
>
>> Hey Everyone!
>> In theory, if one was to switch to wider handlebars, I would assume the 
>> stem length would have to get shorter to keep the reach about the 
>> same...right? 
>>
>> I have 48cm noodle bars on my Sam with a 9cm tallux. The reach is pretty 
>> good...maybe a little on the stretchy side. If I go to a 54cm noodle bar, 
>> I'm thinking it'd be necessary to get a shorter stem. Right? 
>>
>> Thanks for your thoughts!
>> Ben in Omaha 
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/7a0fbc82-fd13-44fb-b2e9-f1c71811db79n%40googlegroups.com.

Re: [RBW] FS: Brooks, Sackville, Deore Cliffhanger wheels

[scott minor]

Wheels and olive saddle sack are sold.

Small blue saddle sack and Brooks B17 flyer saddle still available.  


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/2761d547-67f2-4b2c-afe8-a1cf7ab84a35n%40googlegroups.com.

Re: [RBW] FS: Brooks, Sackville, Deore Cliffhanger wheels

[scott minor]

Wheels are sold!  

Other items available..

Thanks!  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/8d47e8c9-c1db-4e14-a4ec-2278ad41abdcn%40googlegroups.com.

[RBW] Re: Nitto Rack Attachment

[scott minor]

I have an older Nitto Campee with those same tabs..  I had the same 
interference so I cut them off neatly several years ago and do still have 
them in case they ever need to be tacked back on..   but I doubt I'll ever 
need to do that.  I have sackville panniers (don't need the tabs) and some 
80's LL Bean panniers (also don't need the tabs).  Also, there is a closed 
loop near the bottom of the rack that would serve the same purpose for 
hooking a strap, should the need ever arise..   


On Monday, September 12, 2022 at 9:59:37 AM UTC-4 pbsm...@gmail.com wrote:

> I suspect it's just a hook to attach a strap/bungee to. You can certainly 
> lop it off!
>
> On Sunday, September 11, 2022 at 10:43:52 AM UTC-4 rsb...@msn.com wrote:
>
>> I have a couple older Nitto rear racks with this stud attachment on the 
>> lower end. The newer ones don't seem to have it. 
>> It causes a problem with interference on the fender stay. You have to 
>> spread the rack out and put some shims in to make it work. 
>> I'm thinking about sawing/filing it off and touching it up with some 
>> paint. Ha[image: Nitto 2.JPG][image: Nitto Rack.JPG]s anyone done this 
>> mod?
>> Are these for an older type of pannier attachment? My Ortleib's don't 
>> need it.
>> Richard
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/be634f5f-1f0a-4dee-a41f-08641e4243a5n%40googlegroups.com.

[RBW] Re: FS: towel rack, klunker, VO stem, Soma rack, B17

[scott minor]

Saddle, stem, rack, tires are SOLD

Klunker bars, towel rack bars still available..

On Saturday, August 13, 2022 at 7:06:26 PM UTC-4 scott minor wrote:

> update:  
>
> Brooks saddle SOLD
>
> other items available
>
> On Friday, August 12, 2022 at 8:08:25 PM UTC-4 scott minor wrote:
>
>> Several items for sale..prices do not include shipping from VA 24210
>>
>> Crust towel rack bars 63cm width  $100
>>
>> VO Klunker bars, ridden once to try to accommodate a sprained wrist, 
>> didn't work out.  $60
>>
>> VO removable faceplate quill stem:  80mm x 31.8 clamp / nice nickel 
>> finish (used once for Klunkers then shelved). $60
>>
>> Soma Lucas front rack with all hardware and Manny strap. $40
>>
>> Brooks B17 Imperial / brown / new in box. $100
>>
>> Compass Antelope Pass EL (extra light) tires, some sealant residue 
>> present but in excellent shape, ridden on hard pack, not seeing any tread 
>> wear on these yet.. 700 x 55. $100 / pair
>>
>> psc...@gmail.com
>>
>> thanks!  -Scott in VA
>>
>> ( ( ( See photos below ) ) )
>>
>> [image: image0.jpeg]
>> [image: image1.jpeg]
>> [image: image2.jpeg]
>> [image: image3.jpeg]
>> [image: image4.jpeg]
>> [image: image5.jpeg]
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/d599d596-5173-43a3-b779-510c7c4bc38an%40googlegroups.com.

[RBW] Re: FS: towel rack, klunker, VO stem, Soma rack, B17

[scott minor]

update:  

Brooks saddle SOLD

other items available

On Friday, August 12, 2022 at 8:08:25 PM UTC-4 scott minor wrote:

> Several items for sale..prices do not include shipping from VA 24210
>
> Crust towel rack bars 63cm width  $100
>
> VO Klunker bars, ridden once to try to accommodate a sprained wrist, 
> didn't work out.  $60
>
> VO removable faceplate quill stem:  80mm x 31.8 clamp / nice nickel finish 
> (used once for Klunkers then shelved). $60
>
> Soma Lucas front rack with all hardware and Manny strap. $40
>
> Brooks B17 Imperial / brown / new in box. $100
>
> Compass Antelope Pass EL (extra light) tires, some sealant residue present 
> but in excellent shape, ridden on hard pack, not seeing any tread wear on 
> these yet.. 700 x 55. $100 / pair
>
> psc...@gmail.com
>
> thanks!  -Scott in VA
>
> ( ( ( See photos below ) ) )
>
> [image: image0.jpeg]
> [image: image1.jpeg]
> [image: image2.jpeg]
> [image: image3.jpeg]
> [image: image4.jpeg]
> [image: image5.jpeg]
>
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/99f06607-4bf7-4cb7-b714-91bc0bd161a2n%40googlegroups.com.

Re: [RBW] Re: What's your biggest tire on AH Hilsen?

[scott minor]

I have been riding RH 700 x 44 Snoqualmie pass tires on my Waterford AHH 
for a couple years now when not running fenders..  (riding 700 x 38 with 
fenders).  The extra cush from the 44's is really nice for off-pavement, 
(prob worth noting I'm a bigger rider, 220 lbs on a 67cm frame) but I 
prefer 38mm tires when riding on the road, they are more connected on fast 
sweeping turns.  I had Dyads for years and now Pacenti Brevets which are 
tubeless, unlike the Dyads.  After reading about Ken's experience w Dyads 
I'm curious and will inspect my Dyads for cracking.. they are quite old and 
have the 'made in Australia' sticker on them still.  They have survived a 
long life of grit and dirt without incident.  

One thing I notice about these particular RH standard (not ultralight) 44mm 
tires on AHH is the rear fits with ample clearance when the tire is new but 
after a while will swell slightly with wear, reducing clearance but not to 
the point of rubbing the chain stays.  It does get close though.  A swap 
with the front tire at the point evens things back out.  

-Scott 
On Thursday, June 16, 2022 at 11:24:21 AM UTC-4 Ken Yokanovich wrote:

> Offering up a counter-opinion here. Precautionary word that your results 
> may vary considerably based on brake wear and sidewall thickness.  I 
> experienced sidewall failures on Mavic Open Sport, Mavic T217, and Velocity 
> Dyad rims on my old Rivendell Quickbeam (RIP) on which I regularly used 
> 35-40mm tires.  Admittedly, I was commuting year round with lots of MN 
> winter slop.  Lots of hard abusive miles had me replacing brake pads 2-3 
> times/year and seemed like rims annually? I believe that the combination of 
> wear and outward force of wide tires caused cracking in the sidewall and 
> failures.  
>
> The Velocity Dyad failures were less detectable:
> [image: CIMG3122.JPG]
>
> On Thursday, June 16, 2022 at 9:59:12 AM UTC-5 Sean Cleary wrote:
>
>> Thank you Patrick (!) as a big concern is exceeding my Velocity Dyad 
>> 25-38mm limits with proposed 43-45mm tire. Don't want that 
>> wallowing-off-the-rim feel I sometimes get on my very low pressure mountain 
>> bike tires. But your experience is vey enlightening. Velocity told me 
>> to NOT attempt to make rims tubeless either but fascinated with you, 
>> effectively, throwing that caution into the wind as well! After all, didn't 
>> tubless-ness originate on non-tubeless rims?? 
>>
>> On Thursday, June 16, 2022 at 9:25:33 AM UTC-5 Patrick Moore wrote:
>>
>>> Just a remark about 38 mm tires on Open Pro rims. If you worry that 
>>> 38s are too wide for those rims, fear not; I rode 50s on 19 mm rims 
>>> (OW) for thousands of miles on rough dirt tracks with absolutely no 
>>> problem; and I presently ride 71 mm tires on 24 mm (OW) rims on dirt 
>>> tracks (tubeless tires, non-tubeless rims, lotsa tape,13 psi, 
>>> sealant); again, no problem. I think that Mavic states a 28 m max 
>>> width for one of two reasons: remote liability concerns, or optimum 
>>> tire cross-section profile. 
>>>
>>> And I see that Mavic offers the Open Pro in the 650C/571 bead seat 
>>> diameter size; who'd 'a thunk? 
>>>
>>> Patrick Moore, whose 41 mm Naches Passes have the perfect 
>>> cross-section profile on Sun Ringle EQ 21s (21 mm OW). 
>>>
>>> On Wed, Jun 15, 2022 at 9:34 PM jamin orrall  
>>> wrote: 
>>> > 
>>> > Curious about this as well... I have a 2011 waterford homer. I 
>>> purchased it complete off a list member here and then rebuilt it with parts 
>>> I had been saving. Running 38mm panaracer pasela tires on 700c mavic open 
>>> pro rims (Not recommended, I know). There is plenty of room for fenders but 
>>> looking at the clearance at the chainstays I wouldn't push it much much 
>>> more (definitely not on these rims). Could maybe fit a 40mm tire. I will 
>>> say that I think fire roads are a blast on a 38mm tire. I will also say 
>>> that this is the most comfortable bike I have ever owned. 
>>> > 
>>> > Jamin 
>>> > 
>>> > On Wednesday, June 15, 2022 at 7:17:21 PM UTC-7 Sean Cleary wrote: 
>>> >> 
>>> >> Since its arrival in 2011, my Hilsen has had s many personalities 
>>> in the way of bars, stems, saddles, shifters, racks and tires. Oh, and 
>>> bags...lots and lots of bags! Great to have bikes with such flexibility... 
>>> >> 
>>> >> Latest idea is to make it more rail trail-specific, requiring the 
>>> largest tire I can fit. What's the largest tire you've enjoyed using and 
>>> what rim (width) are you running? 
>>> >> 
>>> >> How many are using brakes other than Tektro? 
>>> > 
>>> > -- 
>>> > You received this message because you are subscribed to the Google 
>>> Groups "RBW Owners Bunch" group. 
>>> > To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to rbw-owners-bun...@googlegroups.com. 
>>> > To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/rbw-owners-bunch/fc3dbb51-7b5e-4879-87fc-1f37de047d6en%40googlegroups.com.
>>>  
>>>
>>>

[RBW] Re: FS: 64cm Clem L complete

[scott minor]

Clem L is sold!  

 many thanks, everyone. 

On Thursday, March 3, 2022 at 11:09:31 PM UTC-5 scott minor wrote:

> Quick update:
>
> After receiving a few emails from interested parties it occurred to me I 
> should have mentioned an asking price for frame/fork/headset/BB/seat post 
> along with my update to make it available as frameset as well as complete.
>
> So I'm asking 1600 OBO complete / 900 for frame/fork/HS/BB/seatpost
>
> thanks!  -Scott 
> On Thursday, March 3, 2022 at 10:05:03 AM UTC-5 Justin Kennedy (Brooklyn, 
> NY) wrote:
>
>> Sweet bike! Just noticed your state/zip code - I'm born & raised in 
>> Abingdon but haven't lived there since heading off for college. Maybe I can 
>> take it for a spin next time I'm in town. 
>>
>> On Wednesday, March 2, 2022 at 12:10:54 PM UTC-5 psc...@gmail.com wrote:
>>
>>> Still have the Clem!   
>>>
>>> Also open to parting out to make frame/fork/headset/bottom bracket/ seat 
>>> post available as well! 
>>>
>>> Offers welcome!  
>>>
>>> psc...@gmail.com 
>>>
>>>
>>>>
>>>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/dbcf43fd-230f-4121-ac7f-4d3e3439646cn%40googlegroups.com.

[RBW] Re: FS: 64cm Clem L complete

[scott minor]

Quick update:

After receiving a few emails from interested parties it occurred to me I 
should have mentioned an asking price for frame/fork/headset/BB/seat post 
along with my update to make it available as frameset as well as complete.

So I'm asking 1600 OBO complete / 900 for frame/fork/HS/BB/seatpost

thanks!  -Scott 
On Thursday, March 3, 2022 at 10:05:03 AM UTC-5 Justin Kennedy (Brooklyn, 
NY) wrote:

> Sweet bike! Just noticed your state/zip code - I'm born & raised in 
> Abingdon but haven't lived there since heading off for college. Maybe I can 
> take it for a spin next time I'm in town. 
>
> On Wednesday, March 2, 2022 at 12:10:54 PM UTC-5 psc...@gmail.com wrote:
>
>> Still have the Clem!   
>>
>> Also open to parting out to make frame/fork/headset/bottom bracket/ seat 
>> post available as well! 
>>
>> Offers welcome!  
>>
>> psc...@gmail.com 
>>
>>
>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/6f7a3b92-919b-4cfa-91e2-27cfcb85179fn%40googlegroups.com.

[RBW] Re: FS: 64cm Clem L complete

[scott minor]

Still have the Clem!   

Also open to parting out to make frame/fork/headset/bottom bracket/ seat 
post available as well! 

Offers welcome!  

psco...@gmail.com 


>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/129fd7be-3d80-4a93-9f74-d48edab2b889n%40googlegroups.com.

[RBW] Re: FS: Riv Silver rear rack

[scott minor]

rack is sold.  

many thanks!  
On Tuesday, February 15, 2022 at 10:25:53 AM UTC-5 scott minor wrote:

> I got this last month along with some bags and have decided to stick w my 
> Nitto medium campee rack.  So I am happy to pass this along to anyone who 
> might be looking.  Never mounted, comes with all hardware as new from Riv. 
>  They are out of stock currently at Riv so will pass this along for very 
> slight discount of $165 shipped in the lower 48.  Located in VA 24210.   
> -Scott 
>
> [image: image0.jpeg]
>
> [image: image1.jpeg]
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/173de2e3-cb56-4fd0-a4c5-1cfb14d8020en%40googlegroups.com.

[RBW] Re: FS Fabio's Chest waxed cotton field tan SMALL

[scott minor]

SOLD!  

On Tuesday, January 11, 2022 at 10:59:35 PM UTC-5 Nikko in Oakland wrote:

>
> I’ll snag this if it’s still available! 
> On Tuesday, January 11, 2022 at 7:33:19 PM UTC-8 psc...@gmail.com wrote:
>
>> [image: fabio.jpg]Selling this never-used field tan waxed cotton Fabio 
>> Chest size small.
>>
>> It is new!  
>>
>> $250 shipped in the lower USA
>>
>> psc...@gmail.com
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/2527ebae-7c7e-40f8-a31e-893f9d58a6dfn%40googlegroups.com.

Re: [RBW] Re: Inspiring Clem Smith Jr L builds!!

[scott minor]

Hugh, 

Thanks, the gold Motolites are a tricky color but I think they go well with 
the metallic chameleon green.  I had a 60cm Cheviot in that color about 5 
years ago and loved it then but always felt the bike was a tad small so was 
thrilled to find this 64cm Clem L in the same color from a fellow tall list 
member.  The bars came with the bike, they are the 'wrong angle' Bosco 
bullmoose which I like a lot w this Clem.   
On Wednesday, November 3, 2021 at 8:39:40 PM UTC-4 Hugh Smitham wrote:

> Scott,
>
> I dig the gold Motolites, understated but still an element of bling. Are 
> those the Losco bullmoose or Bosco bullmoose bars. Also I'm warming to that 
> color green, very handsome looking.
>
> Hugh n LA
>
> On Wed, Nov 3, 2021, 4:34 PM scott minor  wrote:
>
>> My new to me 64 Clem L.  Just getting acquainted, wow what an enjoyable 
>> ride.  It floats and rolls really well regardless of what I'm carrying. 
>>
>>
>> On Monday, November 1, 2021 at 9:51:46 PM UTC-4 fraze...@gmail.com wrote:
>>
>>> Sweet build, thanks for sharing!! :)
>>>
>>>
>>> Ron
>>>
>>> "Think of bicycles as rideable art that can just about save the world." 
>>> - Grant Petersen
>>>
>>>
>>> On Mon, Nov 1, 2021 at 6:07 PM J Imler  wrote:
>>>
>>>> [image: 7DED9F5A-51DB-4ED5-B70D-215B7DB65599.jpeg]
>>>> 59 Clem L in naked sunbather land
>>>> On Monday, November 1, 2021 at 8:41:19 AM UTC-7 fraze...@gmail.com 
>>>> wrote:
>>>>
>>>>> That's awesome! 
>>>>>
>>>>> Thanks! 
>>>>>
>>>>> Ron
>>>>>
>>>>> "Think of bicycles as rideable art that can just about save the 
>>>>> world." - Grant Petersen
>>>>>
>>>>>
>>>>>
>>>>> On Mon, Nov 1, 2021 at 8:12 AM Doug H.  wrote:
>>>>>
>>>>>> Congrats! I bought one of the web special Clem L bikes that was built 
>>>>>> up 1x10 with a Shimano indexed shifter. It has Tosco bars, Cliffhanger 
>>>>>> wheels, Teravail Ehline tires, and a Clipper crankset. I'll attach a 
>>>>>> photo 
>>>>>> from the website as it hasn't been shipped yet (hopefully today!). I'll 
>>>>>> use 
>>>>>> a Brooks C17 saddle.
>>>>>> Doug
>>>>>>
>>>>>> On Monday, November 1, 2021 at 10:46:16 AM UTC-4 fraze...@gmail.com 
>>>>>> wrote:
>>>>>>
>>>>>>> Hi all, 
>>>>>>>
>>>>>>> I just bought my first Rivendell (Clem Smith Jr. L) and I am beyond 
>>>>>>> stoked to drive up and pick it up! I was originally looking for an 
>>>>>>> Atlantis 
>>>>>>> frame and fork...but kept looking at Grant's Clem Smith Jr L (maxed 
>>>>>>> out) in 
>>>>>>> the *Staff Bikes* section of the site...it really seemed to be 
>>>>>>> calling to me. And then, with the Riv site redesign (which I like much 
>>>>>>> better BTW), there is the picture representing "Trailish" bikes of 
>>>>>>> Grant's 
>>>>>>> Clem battling a pretty gnarly root section...just muddying up my 
>>>>>>> decision 
>>>>>>> making process...which isn't hard to do, BTW. 
>>>>>>>
>>>>>>>  After discussing my "dilemma" over a few wonderfully lengthy, phone 
>>>>>>> calls with Hugh covering so much bike geekery, I decided to pull the 
>>>>>>> trigger on buying one of the leftover 59 complete bikes that were left.
>>>>>>>  
>>>>>>> Since I was originally looking for a frame and fork, I have a lot of 
>>>>>>> my own parts (both bought and pulled from the bin o' parts) for this 
>>>>>>> bike 
>>>>>>> and I will be replacing some of the parts on the complete. 
>>>>>>>
>>>>>>> If you guys don't mind playing along...I would love it if you fellow 
>>>>>>> Clem Smith Jr L owners could send over some pics of your builds. 
>>>>>>>
>>>>>>> That would be awesome. 
>>>>>>>
>>>>>>> Thanks! :)
>>>>>>>  
>>>>>>>
>>>>>> -- 
>>>>>> You received this mess

Re: [RBW] Re: Widest tire fit on Homer Hilsen?

[scott minor]

My size 67 AHH fits Rene Herse Snoqualmie Pass tires (700 x 44) just fine. 
 I did notice that after many miles the rear tire grew a little in size due 
to slightly higher PSI and greater load than the front, and became a 
tighter fit between the chain stays, so at that point I swapped the front 
and rear tires with each other and all good clearance-wise until they are 
worn out completely.   Currently running Hurricane Ridge 700 x 42 knobbies 
and really loving them.  The size and fit of 700 x 42 knobbies on the AHH 
really feels dialed in.  
On Tuesday, February 2, 2021 at 3:27:13 AM UTC+2 Ben Miller wrote:

> I had an early Waterford AHH size 65. It maxed out at 38x700c tyres. In 
> fact, I ended up parting ways with it because of that. I did really try to 
> get Bruce Gordon Rock n Roads to fit, but it wasn't even close. I think I 
> would have kept to if could have. 
>
> The problem was the seats stays weren't dimpled. So it might have just 
> been that particular frame, though I don't really know. I did inquire with 
> a frame builder about dimpling them, but was told it was too close to the 
> bridge that it would probably ruin the frames structural integrity. 
>
> On Monday, February 1, 2021 at 3:43:19 PM UTC-8 mkernan...@gmail.com 
> wrote:
>
>> I used to have a Waterford Homer.  Not sure of the year.   I ran 45c WTB 
>> Riddlers and 43c Bruce Gordon Rock n Roads.   Both sets: front and rear.   
>> Not sure you could fender those tires though.   Soma Cazadero in 42s are 
>> nice as well.   These tires all lean towards gravel/ dirt oriented.-Mike
>>
>> Sent from my iPhone
>>
>> On Feb 1, 2021, at 3:34 PM, Paul Richardson  wrote:
>>
>> I successfully ran 43mm GravelKing SK+, but only very briefly.  
>> Personally I like the bike best with 38mm Rene Herse or good ol' 33mm Jack 
>> Browns.  Mine's a 2011 Waterford.
>>
>> paul
>> takoma park, md.
>>
>> On Monday, February 1, 2021 at 5:02:58 PM UTC-5 Sean Cleary wrote:
>>
>>> Hey gang, what 700C tires above 40mm have you had success with on 
>>> previous generation (2013) A. Homer Hilsen? Confusing what exactly fits per 
>>> Rivbike. Have really enjoyed GravelKing Slick Plus 35mm on smooth gravel 
>>> and pavement but that's the max width in that non-knobby tread pattern. 
>>> Want to "*go to 11*"; thinking 42-45mm. Thanks!
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "RBW Owners Bunch" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to rbw-owners-bun...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/rbw-owners-bunch/6082fecb-1408-4756-9427-5cd9e6a0a9a8n%40googlegroups.com
>>  
>> 
>> .
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/33798dcf-0e41-4426-88d7-dd53b62453ean%40googlegroups.com.

Re: [RBW] Re: ROADUNO - a new singlespeed!

[scott minor]

+1, Make that four of us pulling for a larger size.  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/845ee6be-e681-435c-8511-e3fb9cc818c3n%40googlegroups.com.

Re: [RBW] Re: daily post ur riv

[scott minor]

Thanks Patrick, 

Tires are RH hurricane ridge endurance compound.  Great tires, if a little 
heavy compared to the Barlow pass I usually run on this bike.  Crankset is 
VO.  I was reluctant to buy it but very glad I did.  It has exceeded my 
expectations.  

To answer your more personal questions, I am a working expat from the US. 
 My wife is English/Greek and we enjoy our life in Greece.  We are both 
music producers / composers and work for ourselves.  

cheers, -s


On Sunday, December 13, 2020 at 11:56:41 PM UTC+2 Patrick Moore wrote:

> Very nice -- bike *and* backgrounds. Are you a working expat or a 
> tourist? If former, what do you do, for whom?
>
> Bike: What are those tires? Pro 5 Vis cranks?
>
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/8b970933-d770-47ab-bd3d-19aad7cfb805n%40googlegroups.com.

[RBW] Re: A Bit Irked that Riv Changed the Seatpost Size

[scott minor]

Do MIT frames all take 26.8 seat posts?   Wondering specifically about the 
MIT Atlantis..


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/f72632d1-62f7-4034-b3ff-1dc488f58ab9n%40googlegroups.com.

[RBW] Re: FS: Clem Smith Jr H 59cm Dark Green Complete

[scott minor]

Clem is sold.   

Thanks to everyone who expressed interest.

 
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/c77217e7-c214-49c6-bd10-d71e62b10a89o%40googlegroups.com.

[RBW] Re: FS: Clem Smith Jr H 59cm Dark Green Complete

[scott minor]

Clem H 59cm complete with extras:  tires, fenders, brooks B17 saddle.   
Still available..

psco...@gmail.com

thanks!  -Scott 



On Thursday, August 27, 2020 at 12:07:44 PM UTC-4, scott minor wrote:
>
> 59cm Clem H complete $1250 + shipping
>
>
> photos here: 
>
> https://www.flickr.com/photos/147564748@N06/albums/72157715683516157
>
>
> Includes the following:
>
> Deore / Cliffhanger wheel set hand-built by LBS, set up tubeless with 
> brand new Rene Herse 55mm Fleecer Ridge Endurance tires ($$!).
>
> 1 x 10sp Microshift clutch derailleur, 12-42 10sp cassette, Wolftooth 
> 'dropstop' 40T chainring on 7400 Dura Ace crankset, Microshift thumb 
> shifter, shifts quietly and smoothly, haven't yet had a false shift!  
>
> Deore V-brakes with Shimano levers.
>
> Nitto 120mm stem with 58cm heat treated Bosco bars, silicone grips.
>
> Stock seat post with black Brooks B17 saddle.
>
> Note:  (Pedals, water bottle cages and rear rack seen in photos not 
> included, will sell rack separately if interested)
>
> Bike is in excellent condition, no marks that I can see except a couple 
> light scratches on the right chain stay, probably from taking the wheels 
> on/off and chain rubbing against the chain stay while loading it in and out 
> of the car.
>
> located in southwest VA
>
> contact psco...@gmail.com
>
> thanks!  -Scott 
>
>  
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/0e3f7dc7-ce5a-4b02-9ece-e47e6f9f3b36o%40googlegroups.com.

[RBW] Re: FS: Clem Smith Jr H 59cm Dark Green Complete

[scott minor]

59cm Clem H complete still available.  Also can throw in a set of VO 63mm 
fluted fenders and used 50mm Soma Cazaderos which work well together..  

psco...@gmail.com


On Thursday, August 27, 2020 at 12:07:44 PM UTC-4, scott minor wrote:
>
> 59cm Clem H complete $1250 + shipping
>
>
> photos here: 
>
> https://www.flickr.com/photos/147564748@N06/albums/72157715683516157
>
>
> Includes the following:
>
> Deore / Cliffhanger wheel set hand-built by LBS, set up tubeless with 
> brand new Rene Herse 55mm Fleecer Ridge Endurance tires ($$!).
>
> 1 x 10sp Microshift clutch derailleur, 12-42 10sp cassette, Wolftooth 
> 'dropstop' 40T chainring on 7400 Dura Ace crankset, Microshift thumb 
> shifter, shifts quietly and smoothly, haven't yet had a false shift!  
>
> Deore V-brakes with Shimano levers.
>
> Nitto 120mm stem with 58cm heat treated Bosco bars, silicone grips.
>
> Stock seat post with black Brooks B17 saddle.
>
> Note:  (Pedals, water bottle cages and rear rack seen in photos not 
> included, will sell rack separately if interested)
>
> Bike is in excellent condition, no marks that I can see except a couple 
> light scratches on the right chain stay, probably from taking the wheels 
> on/off and chain rubbing against the chain stay while loading it in and out 
> of the car.
>
> located in southwest VA
>
> contact psco...@gmail.com
>
> thanks!  -Scott 
>
>  
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/738f7e34-6d2c-415e-943d-b4d76418238co%40googlegroups.com.

[RBW] FS: Clem Smith Jr H 59cm Dark Green Complete

[scott minor]

59cm Clem H complete $1250 + shipping


photos here: 

https://www.flickr.com/photos/147564748@N06/albums/72157715683516157


Includes the following:

Deore / Cliffhanger wheel set hand-built by LBS, set up tubeless with brand 
new Rene Herse 55mm Fleecer Ridge Endurance tires ($$!).

1 x 10sp Microshift clutch derailleur, 12-42 10sp cassette, Wolftooth 
'dropstop' 40T chainring on 7400 Dura Ace crankset, Microshift thumb 
shifter, shifts quietly and smoothly, haven't yet had a false shift!  

Deore V-brakes with Shimano levers.

Nitto 120mm stem with 58cm heat treated Bosco bars, silicone grips.

Stock seat post with black Brooks B17 saddle.

Note:  (Pedals, water bottle cages and rear rack seen in photos not 
included, will sell rack separately if interested)

Bike is in excellent condition, no marks that I can see except a couple 
light scratches on the right chain stay, probably from taking the wheels 
on/off and chain rubbing against the chain stay while loading it in and out 
of the car.

located in southwest VA

contact psco...@gmail.com

thanks!  -Scott 

 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/1321c703-a4ea-428c-995b-d944c5a7dd5bo%40googlegroups.com.

Re: [RBW] Re: Charlie H Gallop!

[scott minor]

Ah, I hope that’s the case.  I’m increasingly attracted to the Gallup and very 
curious about its development moving forward.  As for the complete-only bikes, 
yes I recall now that those are to be Nobilette built bikes offered as 
completes, not the Gallup.  Thanks for chiming in and helping clear that up.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/f9edd022-2e85-41d7-ae5f-fac94c0f1ed5o%40googlegroups.com.

Re: [RBW] Re: Charlie H Gallop!

[scott minor]

Is this the bike Grant wrote about a while back that will be offered as 
complete-only?  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/6b8ef508-ffba-4d12-b9c5-332d9a0cf99ao%40googlegroups.com.

[RBW] FS: VBC crankset, WI / Son Wheelset

[scott minor]

Crankset is sold! 

Wheels still available.  

thanks!  -Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/1d3513ea-de41-4045-a503-a64d93ad1790%40googlegroups.com.

[RBW] FS: VBC crankset, WI / Son Wheelset

[scott minor]

White Industries VBC crankset w 175mm arms, 46/28 chainrings.  Less than 1k mi  
$250 shipped

Handbuilt wheelset:  Son widebody gen hub / White industries T11 rear hub w 
Shimano 12-32 9 sp cassette / 36h Velocity A23 rims.  They roll straight and 
true.  Also comes with used Compass Barlow pass tires (38mm).  $525 + shipping 
via bikeflights.  

psco...@gmail.com 

-Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/7a9d4d34-817c-431b-9319-9e7cce7c7432%40googlegroups.com.

[RBW] Re: FS: 65cm A Homer Hilsen (Waterford) F/F/HS

[scott minor]

sold!  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/52b9774e-1e65-4f57-8963-6432d533f2d4%40googlegroups.com.

[RBW] Re: FS: 65cm A Homer Hilsen (Waterford) F/F/HS

[scott minor]

Homer is still available!  

Also, I'm open to selling as a complete or partial build if anyone is 
interested.

Feel free to contact me with any questions.

psco...@gmail.com

thanks!  -Scott 


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/9341cf4f-d610-42a4-9bc8-2585780266e6%40googlegroups.com.

[RBW] Re: FS: 65cm A Homer Hilsen (Waterford) F/F/HS

[scott minor]

Homer is spoken for, pending payment.

Thanks all!  -Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/324f483c-6560-4169-b71f-f1bcc1b6bc64%40googlegroups.com.

[RBW] Re: FS: 65cm A Homer Hilsen (Waterford) F/F/HS

[scott minor]

Reid, To be more specific, the custom replacing the Homer is a Brevet, out of 
Bourgogne, France.  

Also, just to assure any interested parties, though I live in Europe now, my 
Homer is in the good hands of my lovely friends at my previous hometown LBS, 
Tennessee Valley Bicycles in Knoxville.  After moving a couple months ago, they 
packed up the AHH for me to ship to Europe but since then I have decided to put 
that considerable amount of shipping money towards a custom instead.  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/7a81a140-f95a-4af5-83c5-b0ae772b41a4%40googlegroups.com.

[RBW] Re: FS: 65cm A Homer Hilsen (Waterford) F/F/HS

[scott minor]

Reid,  thanks for the good word.  I’m living on the other side of the pond now 
and getting a custom from a small builder in France who is semi-local.  

John,  I’m not sure of the year but determined that it’s a waterford frame at 
one point, and probably an early-ish one seeing how it has a single top tube, 
not double like the more recent ones from waterford.  There’s some useful sales 
literature on the cyclofiend site and the geometry of this frame matches those 
specs.  My PBH is 95, saddle height is 84cm.  

http://www.cyclofiend.com/Images/rbw/rr38_pg47lg.jpg


 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/3532f71f-d13a-42b0-a68b-07610b39c135%40googlegroups.com.

[RBW] Friction Shifting 9-10s Question

[scott minor]

I’m running 1 x 10 friction on my Clem H with a clutch derailleur and wolftooth 
chainring (38t) and feel like it’s the quietest, smoothest shifting I’ve ever 
had.  I paid close attention to centering the chain line, and had to experiment 
w a couple BB’s before finding it.  Maybe that effort is what makes the 
difference, maybe it’s the clutch.  Either way, even w the longer Clem chain, I 
find it quieter and smoother than the 2x9 drivetrains on my other bikes.  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/e3934786-7c8b-47d3-a20b-b68e4a64ad80%40googlegroups.com.

[RBW] Re: 62cm MIT Atlantis photos anywhere?

[scott minor]

Very helpful!  Thank you, Mike, and James.   After seeing these photos, I'm 
thinking one of the shots on the Riv site might be a 62 after all.  Either 
way, these shots certainly satisfy my curiosity.. and that is to say, the 
62 looks good!   -Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/a653dc6b-92c6-4c9c-949b-fde5bc46edd0%40googlegroups.com.

[RBW] 62cm MIT Atlantis photos anywhere?

[scott minor]

Does anyone have a photo they can post?  I can't detect one on the Riv site 
or google images and curious what a 62 actually looks like.  Seems like all 
the arch tube examples on the net are 59's.  There are 2 different arch 
tube side profile shots on the current Riv Atlantis page but they appear to 
be 2 different pictures of the same sized frame.  A full build picture 
would be ideal but frameset pic is better than nothing.  

thanks!  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/536d47aa-1860-4463-9bb9-94c96ed14a8a%40googlegroups.com.

[RBW] Homer x Rene Herse

[scott minor]

I ran Snoqualmie 44’s on my Homer (pre MIT) and noticed that as the tires 
expanded with mileage, the rear got very tight but never rubbed.  I’m back on 
Barlow pass 38’s now, mainly because it has been so wet in the southeast that I 
had to put fenders back on.  But when this wet season lets up I’ll go back to 
the Snoqualmies.  I did notice the rear tire expanded more quickly than the 
front, probably due to carrying more weight, so I marked which was which and 
will reverse them when they go back on.   Plenty of room in the front, btw.  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/5733dbdd-ede9-41cb-af04-6da7eb6d5e05%40googlegroups.com.

[RBW] FS feeler 68cm Atlantis

[scott minor]

I’ve never seen a 68cm Atlantis.  I’m curious, do you know the saddle height in 
the photo?  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/0abb0420-8ea7-4e5c-9aae-18a8b87b19d3%40googlegroups.com.

[RBW] Re: FS: Sackville TrunkSack Small - Gray

[scott minor]

pm’d 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/7344a4a1-b6dc-4727-add9-f523bb903026%40googlegroups.com.

[RBW] Re: Widest wide range double chainring setup? How wide is too wide?

[scott minor]

Correction. That’s right Bill, 18t gap, not 22t gap.  Thank you!  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/ea9ee3d3-e744-47f4-9628-362e3f06f15a%40googlegroups.com.

[RBW] Re: Widest wide range double chainring setup? How wide is too wide?

[scott minor]

I’ve been riding a 46/28 for about 5 years now and like it alot.  Mind you it’s 
on a Homer running 38mm tires, but a 22 tooth gap is not a problem at all. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/0e33988b-1354-4914-9ee4-6e47d4c5bdd4%40googlegroups.com.

Re: [RBW] Re: daily post ur riv

[scott minor]

Wow Reid, that's one of the best looking tall Sams I've seen.  bravo!Looks 
like a blast 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/828274e2-b2d8-4dbe-9499-d47570aa0d00%40googlegroups.com.

Re: [RBW] Re: daily post ur riv

[scott minor]

On Sunday, February 9, 2020 at 6:56:17 PM UTC-5, scott minor wrote:
>
> I got this A Homer Wilson 
>

ugh dang spell check ..  Hilsen, Hilsen Hilsen   ahh that's better!  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/2eb0a056-330e-474c-9885-3067cf81dda7%40googlegroups.com.

Re: [RBW] Re: daily post ur riv

[scott minor]

I’m running a similar setup on a 59 Clem with large fluted VO fenders and 
tubeless Cazadero 50mm tires.  The tires pick up small pebbles sometimes which 
makes a small tinking sound (I prefer silence) but other than that I’m very 
happy w the setup.  Super solid feel and a joy to ride.  

https://flic.kr/p/2igwPUF

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/e61dee94-6df5-4082-8078-099367cb5a4b%40googlegroups.com.

[RBW] Can we talk about long wheelbases?

[scott minor]

Great topic!  As a tall guy with a 95cm PBH, I LOVE the new found comfort of 
riding a longer bike.  Finally, there are a few bikes that are tall enough for 
me, and proportionally not too steep or too short feeling.   My first 
experience with longer chainstays was with a 60cm Cheviot that I originally 
purchased for my wife but in the end became my everyday commuter for a few 
years.   It felt like a breakthrough in comfort, even coming from a 62 Hunq but 
over time the Chev felt a tad small (low) for me and sure enough my PBH is 1cm 
past the recommended fit range.  Last year I got a wide-Bosco'd 59cm Clem H 
with full racks and fenders for everyday use.  It has a longer top tube, longer 
chainstays and is a bit taller compared to the Cheviot and is easily the most 
well-balanced and comfortable bike I have ever ridden, which is saying a lot 
coming from a Hunq and Chev.   My Clem riding has led me to have much more 
interest in other LWB models, especially the newer Homer and Gus, despite the 
'odd' (by traditional standards) appearance of these stretched out frames.  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/8d78d3e3-1bd8-4536-b94b-fe85a6dc0fc3%40googlegroups.com.

[RBW] What size BB spindle comes on new 59cm Clem framesets?

[scott minor]

My 59 Clem H that arrived from Riv 2 weeks ago came w a 110 in it.  If there’s 
a specific size you need just give them a call and they will work w you on 
getting the length you need.   

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/db9cf544-4c71-4eeb-805a-30ecd64a4c33%40googlegroups.com.

[RBW] Re: daily post ur riv

[scott minor]

Joe,  the cranks are old 7410 Dura Ace that I had in the bin.  I got a 
wolftooth 40T chainring for it, and already loving the combo of that chainring 
w a clutch derailleur, especially with that much chain length!  The chain runs 
smooth and sticks like glue.  The stiff spring of the clutch makes taking the 
wheel on/off a bit of a struggle, need a strong third arm to hold the rear mech 
out of the way.. but hopefully will find a trick for that.   Also getting a 
very useable chainline w a 107mm BB spindle I already had.  
cheers, -scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/8e3d2e69-530b-43a6-821d-dc3272a35513%40googlegroups.com.

[RBW] FS: Nitto Noodle 48cm bars / Tallux 10cm stem

[scott minor]

Both items sold.  Thanks!  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/676053a0-5ecb-4b33-9951-1f756f321daf%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: Nitto Noodle 48cm bars / Tallux 10cm stem

[scott minor]

I bought these from Riv last year but never used them.  Both items in as-new 
condition. 

48cm Noodles (26.0)  - $55 + shipping 
10cm Tallux stem (26.0) -$45 + shipping 

pictures here..   

https://flickr.com/photos/147564748@N06/sets/72157708788185606 

Thanks!  Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/3a96e342-84e3-4fdd-a24a-5462382d3bbe%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: 60cm Cheviot complete

[scott minor]

That would have been possible yesterday, however completr bike is now sold.  
Thanks!  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: 60cm Cheviot complete

[scott minor]

Complete bike is sold!  Thanks everyone.

-Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: 60cm Cheviot complete

[scott minor]

Thanks for the interest so far.  I should mention, the SP hub works perfectly 
and runs quietly.   I removed the Edelux2 headlight and Mark’s rack just before 
posting this sale.  

Also, if someone is interested in just frame/fork/headet/bottom 
bracket/seatpost I’d be happy to make that a available.  Or message me if you 
have interest in any combination of build between F/F/BB/HS and complete, we 
can work it out.

Thanks!  -Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] 60 Cheviot complete

[scott minor]

It pains me to part with this bike but I  must as I am moving countries in a 
couple months and only have room to keep one bike.  

I bought the Chev frame/fork new from Riv in ‘17, Rich built the wheelset w a 
Shutter Precision generator hub in front, Deore rear.  The rest of the bits I 
either had already or added as the setup evolved.  It has Billie bars with a 
Simworks stem that’s nice and sturdy.  IRD Stem-mounted Silver shifters 
(friction) and Diacompe brakes.   Tires are Soma Supple Vitesse 700x48, super 
plush and fast!  The Tektro sidepulls that were originally on the bike didn’t 
leave much room for clearance with these tires so I put on some long reach 
Diacompe center pulls from Riv, used the plastic inserts that let you run 
nutted brakes on a recessed frame, and they have worked out great!  They stop 
well, don’t squeal, and have lots of clearance.  Drivetrain is standard Sugino 
triple crankset from Riv, IRD Alpina front derailleur, and Sun XCD rear.  11-32 
9 speed.  

Items pictured but NOT included in sale are the following:  B17 saddle, saddle 
bag, water bottle cage.

Aside from those things the bike comes complete as pictured here

https://flickr.com/photos/147564748@N06/sets/72157708354122994

Asking $1625 + shipping via bikeflights

Located in Knoxville TN, pickup welcome.

Thanks!  -Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: daily post ur riv

[scott minor]

Here’s my 60cm cheviot.. 

https://flic.kr/p/2diZYeS

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Mixed bag results: Fenders on my Leo

[scott minor]

I’ve used a small strip of thick moleskin on the fender to take up a tiny gap 
and it has worked surprisingly well, has lasted 3 years so far and no rattle or 
unsightly issues.  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: comparison: Marathon vs Compass

[scott minor]

I’ve been running marathon 700 x 38 on my cheviot for some time, ultra smooth 
riding.  But my wife’s enthusiasm w her 650b x 48 panaracers got me curious 
about extra cush so I’m trying out some Soma Vitesee 700 x 48 which are lighter 
and more pliable than the marathons.  I’m really enjoying the speed and feel of 
the Somas in general.  The one thing I immediately miss about the Marathons 
though, and being a sound sensitive person (I’m a recording engineer), is the  
s i l e n c e of the Marathons.  The 48’s are louder but somehow feel faster.  
I’ll give it some time but I’m now trying to get a feel for how important it is 
to me to have a quiet tire.  lightness and ease vs silence, to me that’s a 
tough one.  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: Roadini F/F/HS/BB/SP 61cm Blue

[scott minor]

photos here: 

https://flickr.com/photos/147564748@N06/sets/72157672740481978

thanks!  -Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: Roadini F/F/HS/BB/SP 61cm Blue

[scott minor]

I’ve had this frame since they first shipped last year and still have not 
completed the build.  Now I have my eye on a more classical frame (level top 
tube) that will serve the same function, run the same wheels, tires, so I’m 
offering up the Roadini for sale.  
I have mounted wheels and stem but otherwise the frame is NOS and shows no 
flaws.  If you’re looking for a Roadini in stunning Riv blue, here’s a chance 
to save some $.  
Asking $725 w headset, BB, seat post + shipping

Thanks!  -Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Billie Bars?

[scott minor]

Took some cockpit photos today of billie bars on my chev, thought I’d share.  
Stem is 12cm simworks, Silver/IRD stem shifters, Dia-comp brakes.   I’m really 
enjoying this setup!  

https://flickr.com/photos/147564748@N06/sets/72157698354507761

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Billie Bars?

[scott minor]

I went from albatross to billies on my 60cm chev and now that I’ve ridden it 
for a couple months (road/path) have to say I prefer the roominess of the 
billies, and also the more angled hand position when back on the grips.  The 
billies put your hand/wrist less thumb-forward than the albas which works well 
for my and my fussy AC joints.  I also changed the stem from 11cm w albatross 
to 12cm w billies.   I do love albatross bars though, been riding them for more 
than a decade and will keep that cockpit for another bike someday.  I also went 
from bar-ends on the albas to stem shifters w the billies.  A local hunq rider 
friend likened the stem shifter setup to pre-ripped jeans, haha!  too funny.  i 
get it but the cleaner bars and ‘easy enough’ stem-shifting is working for me 
on this bike.  But mostly, being 6’4” (95 pbh) on a 60 chev, I’m enjoying the 
extra room of the billies!  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: FS: Bosco handlebar 55cm cro-mo

[scott minor]

Sold!   thanks all

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: Bosco handlebar 55cm cro-mo

[scott minor]

In great shape.   $45 shipped 

thanks!  -scott in TN 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: FS: 62cm Hunqapillar complete [sold]

[scott minor]

Thank you, Bob, for the good wishes.  

The Hunq is now SOLD and will find its new home back in CA.  

thanks all,  -Scott

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: New Atlantis Pre-sale page is up on rivbike.com

[scott minor]

I’d love to see what the double TT models look like (59, 62).  Is there a photo 
or drawing out there anywhere?  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: 62cm Hunqapillar complete

[scott minor]

now listed on ebay.  

https://m.ebay.com/itm/Rivendell-Hunqapillar-62cm-classic-bicycle/263592841390?hash=item3d5f5b90ae:g:sOSwUN9ayMbi

I’m open to reasonable offers.. 

thanks! 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: 62cm Hunqapillar complete

[scott minor]

Still looking for a home for this silver/cream Hunqapillar.  Also, can sell 
frame/fork/headset/BB for 1500.  

https://flickr.com/photos/147564748@N06/sets/72157692690766831

thanks, -scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: 62cm Hunqapillar complete

[scott minor]

Thanks!  I’m 6’4 w PBH 94.  Standover height is 88.5cm w thunder burts.  Saddle 
height in the photos is 83cm.  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: 62cm Hunqapillar complete

[scott minor]

Hello everyone,   

I've decided to part with my Hunqapillar after owning it for a couple years 
now.  It simply doesn't get ridden enough since I got a Cheviot, which 
between that and an Ocean Air Rambler cover my bases well enough.  I should 
be so lucky.  Seems a bit decadent to have this beautiful bike leaning in 
the corner.  I bought it used from Ant Ritchey a couple winters ago and 
it's pretty much in the same nick it was in when I got it.  It's a lovely 
ride.

As for details, drive train is standard Sugino triple with 12-32 9 speed 
cassette, Paul canti brakes w kool-stop salmon pads, Paul levers, Paul 
funky monkey brake stop, IRD thumb shifters, MAP Ahearne bar (the wider 
one), 110mm tallux stem, nitto front rack.  Wheels are Velocity rear / 
Shutter Precision gen hub front w  Atlas rims and 2.1 Thunder Burts.  Tires 
have less than 250 mi on them and roll beautifully.  

asking 2250 complete + bikeflight shipping or local pickup

pictures here:

https://flic.kr/s/aHskxEYESJ

best regards, -Scott Minor in Knoxville, TN

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Will the Ocean Air Cycles Erlen Bag Support work w/ my Nitto seat post?

[scott minor]

Hi John, 

I really like the Erlen, the design couldn't be more boiled down, and it's 
super solid.  I have an Ocean Air Rambler as well (that I love) so perhaps 
I'm predisposed to find favor in the stuff Rob is putting out there.   
-scott 


On Saturday, April 8, 2017 at 9:10:12 PM UTC-4, John wrote:
>
> Hi Scott, thanks for the measurement. It looks like I need a minimum 46mm 
> for the Erlen  to work.
>
> I emailed Ocean Air Cycles and they said they are working on a revised 
> version which will fit the Nitto S-83 seat post.
>
> How do you like using the Erlen so far?
>
> Thanks again,
>
> John 
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Will the Ocean Air Cycles Erlen Bag Support work w/ my Nitto seat post?

[scott minor]

Distance from front of Erlen seat rail section to the cross brace is 41.5mm

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Will the Ocean Air Cycles Erlen Bag Support work w/ my Nitto seat post?

[scott minor]

I have an Erlen here I'd be happy to measure.  What's the length of the 
seat rail clamp on your seat post?  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: FS: Sam Hillborne 62cm Black and Cream

[scott minor]

Hi Dave,  My PBH is 94, inseam is 35"ish and 62 sam is a good fit.  I think I'm 
right in the middle of recommended PBH range for it.--Scott 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: Sam Hillborne 62cm Black and Cream

[scott minor]

price drop to 875 for group members.  Also now listed on ebay.  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: Sam Hillborne 62cm Black and Cream

[scott minor]

I purchased this sam from Rivendell in Jan '16 and have recently moved most 
of its parts over to a hunqapillar.  Alas, after much deliberation I have 
now decided to part with it.  It's pictured with Tektro long reach brakes 
which I'm happy to include.  Also includes headset originally installed by 
Riv.  Overall the frame is in excellent shape and looks almost new.  Asking 
$975

photos here:  https://flic.kr/s/aHskS5WnMf

Scott Minor
Knoxville, TN

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.