e Distribution Sales
>
> ConVergence Technologies
>
> Cell: +1 (303) 746-3590
>
> dwh...@converge-tech.com
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Eric Kuhnke
> *Sent:* Wednesday, September 21, 2016 1:04 PM
> *To:* af@afmug.com
> *Subjec
rge-tech.com> dwh...@converge-tech.com
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Eric Kuhnke
Sent: Wednesday, September 21, 2016 1:04 PM
To: af@afmug.com
Subject: Re: [AFMUG] Any Licensed MW gear doing Channel Aggregation?
You can't "bond" two things that are totally differ
If you are wanting to do a same polarization on a 30 and 40mhz channel
Only one I can think of that does this in one radio is SIAE at the
moment. They have a co-polar diplex unit internal. You could do it as
well with a ceragon possibly and an external diplexer.
On 9/21/2016 1:36 PM, Sean Hesk
There are lots of radio head units that aggregate internally, it's just
opaque to you as the ISP/network operator end user... an Exalt
ExtremeAir18 1 Gbps FDD link is two polarities simultaneously between two
radio units, you are presented with a single gigE interface on each end.
On Wed, Sep 21
what if you did SAF integra radios in a 2+0 config, one radio on your 30Mhz
channel and the other on the 40Mhz channel and then used their 2+0
aggregation (in reality it's an internal switch that does LAG).
i don't think anyone has a 1 radio head unit that can aggregate, and i'm
not sure how you'd
You can aggregate layer 1 radio level with SIAE AGS20, it will be multiple
radio heads, but one AGS20 supports up to 4 heads. Contact Ken, tell him I
sent you.
Kenneth Monro
Director of Sales
kenneth.mo...@siaemic.com
936 647 7399
Erich Kaiser
North Central Tower
er...@northcentraltower.com
Off
, September 21, 2016 11:04 AM
To: af@afmug.com
Subject: Re: [AFMUG] Any Licensed MW gear doing Channel Aggregation?
You can't "bond" two things that are totally different radios and speeds, what
you can do is establish router traffic across each link between IP interfaces
and balance t
ote:
> We were looking at bonding a Mimosa B11 and Mimosa B5 to start.
>
>
>
> Rory
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Gino Villarini
> *Sent:* Wednesday, September 21, 2016 9:27 AM
> *To:* Animal Farm
> *Subject:* Re: [AFMUG] Any Licens
Do you need single TCP/IP streams that exceed 200-300 Mbps? This would
ordinarily be much more easily accomplished (and without vendor-specific
proprietary microwave aggregation weirdness) using a router on each end,
and in an example with two parallel separate microwave links, two separate
OSPF r
We were looking at bonding a Mimosa B11 and Mimosa B5 to start.
Rory
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini
Sent: Wednesday, September 21, 2016 9:27 AM
To: Animal Farm
Subject: Re: [AFMUG] Any Licensed MW gear doing Channel Aggregation?
I was thinking on channel
Computing Solutions
Midwest Internet Exchange
The Brothers WISP
- Original Message -
From: "Gino Villarini"
To: "Animal Farm"
Sent: Wednesday, September 21, 2016 10:44:51 AM
Subject: [AFMUG] Any Licensed MW gear doing Channel Aggregation?
I got paths
> *To:* Animal Farm
> *Subject:* [AFMUG] Any Licensed MW gear doing Channel Aggregation?
>
>
>
> I got paths were we have several licenses for 30 mhz and 40 mhz
> channels, any gear supports channel aggregation?
>
--
If you only see yourself as part of the team but you
Af [mailto:af-boun...@afmug.com] *On Behalf Of *Gino Villarini
> *Sent:* Wednesday, September 21, 2016 8:45 AM
> *To:* Animal Farm
> *Subject:* [AFMUG] Any Licensed MW gear doing Channel Aggregation?
>
>
>
> I got paths were we have several licenses for 30 mhz and 40 mhz
> channels, any gear supports channel aggregation?
>
.
Rory
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini
Sent: Wednesday, September 21, 2016 8:45 AM
To: Animal Farm
Subject: [AFMUG] Any Licensed MW gear doing Channel Aggregation?
I got paths were we have several licenses for 30 mhz and 40 mhz channels, any
gear supports
I got paths were we have several licenses for 30 mhz and 40 mhz channels,
any gear supports channel aggregation?
15 matches
Mail list logo