Uh, no. Definitely not good.
Here's one of mine for comparison. Which is also where I'm having odd
issues with two 3GHz 450 sectors. Not to mention the same problems at
sites with parasitics. I have another SyncInjector at another site
running a 5GHz 450 AP and it works fine. Plus dozens and
Looks like the GPS is losing lock.
The counters I'm talking about are on the analog tab
On Mar 4, 2015 8:58 AM, Bill Prince part15...@gmail.com wrote:
I reset these counters about a week ago. I think this is not normal?
bp
part15sbs{at}gmail{dot}com
On 3/4/2015 1:57 AM, Forrest
Hey Forrest, any luck on the updated build for the Base-1's, minus the
web GUI of course? I would really like to get the .0 row via SNMPwalk so
my indexed Cacti template works for both Base-1's and 2's.
On 3/4/2015 3:57 AM, Forrest Christian (List Account) wrote:
There are some pulse counts
We're doing the same thing thresholding on the 1PPS Active counter. But
we (still) don't have any of our 3GHz PMP450s in the air yet. Was hoping
to have at least one of them up this week, but it's not worked out that way.
We are getting messages like these in the event log of the affected APs:
There are some pulse counts on the syncinjectors which may help you
troubleshoot. Pulses used should go up by one every second, no more, no
less. None of the other counters should increment except very rarely.
If you're seeing anything else, shoot a couple of screenshots into
Yes, there are issues I'm seeing with AutoSync on all bands with
13.2/13.2.1. But 3GHz is... different, and I don't know why. I have a
couple APs on a SyncInjector and some single APs on parasitic pipes. I
thought it was just the SyncInjector or something else at the site until
I started
We have a syncpipe basic that we think is starting to act up. It seems
to lose sync about once every day or two for about 1 second. It's
starting to raise havoc with long-lasting client sessions through the
affected APs.
We only have a couple of syncpipe parasitics in stock; can one of
Yes.
http://manuals.packetflux.com/index.php?page=using-a-syncpipe-parasitic-with-a-syncinjector
On 3/2/2015 11:25 AM, Bill Prince wrote:
We have a syncpipe basic that we think is starting to act up. It
seems to lose sync about once every day or two for about 1 second.
It's starting to
Thanks George!
i take it from the description that this boogers up the power/outputs
such that (ether?) RJ45 on the parasitic can be used to connect to the
syncinjector? One of the RJ45s has lights, and the other is just a
vanilla shielded RJ45 (I'm looking at a rev H1). So I can just build
Doesn't matter. The RJ45's are just pass-thru. The new universal pipes
pull power from two pins, so it can be used with either PMP100/450 or
430 APs. But I always have the guys put the jumper out to the radio into
the center RJ45 and the cable from the injector to the RJ45 with the
LEDs, just
Not this one. This one is running a pair of PMP450s in 5 GHz.
We're putting up a pair of PMP450s soon on different POPs; one will go
into a syncinjector, the other will be a CTM.
Is there some issue that you're seeing on the 3GHz varaiety?
bp
part15sbs{at}gmail{dot}com
On 3/2/2015 10:06
11 matches
Mail list logo