Why all this GARBAGE WARE for one single app?

I am trying to install gedit on mac , installed macports, then the xcode requirements rand the command to install gedit. Now about 209 minutes later I am still seeing GARBAGE like GstreamerXXX and GstreamerYYY still installing . THIS IS NUTS! I NEVER ASKED TO INSTALL GSTREAMER. I know there are

Re: [FFmpeg-user] Trying to remember how I did this.....

Thanks Laine and Andrew . I do believe that yadif=1 is what I am looking for. After googling it I see so many others that express their love for it so that sounds right! Thanks On Wed, Oct 4, 2023 at 3:02 AM Andrew Randrianasulu wrote: > ср, 4 окт. 2023 г., 10:34 Mark Dm : > &

Re: [FFmpeg-user] Trying to remember how I did this.....

Its NOT Telecine. It is Digital Video 8 video at 27.97 FPS I am looking specifically for the setting that derives the 59.94FPS from the 27.97 FPS source with such beauty and without deinterlace. On Wed, Oct 4, 2023 at 12:28 AM Laine wrote: > > > > > On Oct 4, 2023, at 1:36 AM,

[FFmpeg-user] Trying to remember how I did this.....

I had some DVD Video that I had converted using ffmpeg some years ago. What I did was converted NTSC DVD video (4x3) to 960x720 @59.94 FPS and the result was incredible. I had found a forum some time later where another user claimed he had done the same and he too had incredible results. The

Re: [sane-devel] Canon LiDE70 support

I think also depending on what software you use to scan makes a big difference some software has the ability to process the image according to a defined preset or even auto mode. Seems to me I discovered much the same on an old cannon scanner some years ago. On Sat, Apr 15, 2023, 2:24 PM Ralph

Re: [sane-devel] Network detection fails to find Canon Scanner

Have you tried installing sane-airscsn? On Mon, Mar 27, 2023, 9:08 AM Harvey Nimmo wrote: > Hallo and greetings from northern Germany! > > I've joined this forum hoping for some help in getting my new Canon 3- > in-1 printer/scanner/copier to work in my home network together with > OpenSUSE

Re: [sane-devel] Kyocera Scanner not working in any Linux Distro

You say you are using "official driver" but if this scanner is WSD compliant, then try installing SANE-AirScan. It will not hurt to try. On Tue, Apr 26, 2022 at 2:06 AM jitesh pandey wrote: > Ok, thanks for reply, now take a look at the following, maybe you could > find something into it > > >

Re: [sane-devel] Kyocera Scanner not working in any Linux Distro

oops sorry I did not notice that one is USB only, so WSD will not work. On Tue, Apr 26, 2022 at 11:14 AM Mark Dm wrote: > You say you are using "official driver" but if this scanner is WSD > compliant, then try installing SANE-AirScan. It will not hurt to try. > > On Tue

Re: [sane-devel] ESCL

For anyone following this thread. This is one place I posted what Mopria Android saw when I had 2 scanners on same IP using different ports https://github.com/alexpevzner/sane-airscan/discussions/219 Mark On Fri, Mar 11, 2022 at 11:39 AM Mark Dm wrote: > I do not know how it works

Re: [sane-devel] ESCL

ss printing. > > > On Fri, Mar 11, 2022 at 11:56 AM Mark Dm wrote: > >> Has anyone actually tested this other than the github airsane chatter >> about it? >> >> On Fri, Mar 11, 2022 at 6:38 AM Steven Santos >> wrote: >> >>> If you have not hear

Re: [sane-devel] ESCL

Has anyone actually tested this other than the github airsane chatter about it? On Fri, Mar 11, 2022 at 6:38 AM Steven Santos wrote: > If you have not heard, ESCL is now supported on Windows 11. SANE scanners > can now be shared with Windows workstations using AirSane. > > This means that it

Re: [sane-devel] DCP-7030

>From my experience most of those few year old Brother scanners on the MFPs are already WSD, and the newest ones are eSCL too . Did you already try the SANE-AirScan back-end? The SANE-AirScan Back-end will support WSD and eSCL. Mark On Mon, Feb 28,

[sane-devel] Asking for testers

I have developed a solution of sharing a Windows Scanner via the eSCL protocol. It is called Twain2AirScan. Although it is compatible with SANE as a client via the SANE-AirScan back-end (not SANE-eSCL) ,it is not really "SANE" . Recently I added duplex ADF where before it had only simple ADF.

[sane-devel] s400w scanner "middle-ware" or "compatibility layer"

I posted here earlier the solution I made for several models of scanners (based on s400w scanner) to work With Linux SANE-Airscan and Mac OS, with the link to scannershare.com. Since then the web site was completely renovated and several people tried to download it and got the wrong file. If any

Re: [sane-devel] New "SANE" driver, or sort of "Middleware"?

g it into the > stores for Snap, flatpak, ... and then every Linux user can simply > download and install it, regardless of which distro and he can scan on > the supported scanners. sane-airscan is already included in the standard > distros and automatically discovers your Scanner Application ma

[sane-devel] New "SANE" driver, or sort of "Middleware"?

Ok I have spent a few years making various versions of GUIs and tools for s400w based scanners which include Century CPS-A4WF, Halo Magic Scanner, ION AirCopy, ION AirCopy E-Post Edition, iScan Fly, Kaiser Baas WiFi Photo & Document Scanner, Mustek iScan Air / S400W, Transcription Patri Kun A4

[sane-devel] Anyone working on or interested in working on eSCL backend for SANE?

Hello inSANErs , I saw a post fro about a year ago where someone wanted to start a project for an eSCL back-end for SANE on Google Summer of code. Did that go anywhere? As I have spent many months learning the ins and outs of AirScan eSCL protocol , with much trial and error, I am interested in

[sane-devel] Possible to make test backend to slow down?

I am testing using the test backend and have an issue in that it responds much more quickly that a real scanner. I am working with making eSCL compatibility and need to see if there is a way to slow it down so a virtual scan takes more than a couple of seconds. This is the only way I will be able

[sane-devel] Fwd: CanoScan LiDE 220... on a Raspberry Pi.

Do both systems show the same USB ID for the scanner? If not you need to use a tool that sets the mode of the USB device I believe it is called USB Modeswitch. Some devices rely on this to change the "personality" of the device by changing the USB ID . This is commonly used in 3G USB dongles but

[users@httpd] confirming proper heders

Hello, I have a project I have been working on where I need to dend "201 Created" then "Loction http://IPADDRESS/result. I am setting headers i PHP and have checked in wireshark and although I did see 201 Creater and Location http://IPADDRESS/result I was later informed that the PHP code I was

[users@httpd] Files POSTed are not saved, instead 404

Hi I am new to the list . I posted this earlier but am afraid for lack of subject it was ignored. Posting here again with update. I have an issue which I believe to be an apache configuration issue When I POST a file with CURL or android app I get 404 error however the path exists. As I

[users@httpd]

Hi I am new to the list . I have an issue which I believe to be an apache configuration issue When I POST a file with CURL or android app I get 404 error however the path exists. As I understand It i do not need a handler to POST and the file should appear. I am trying to replicfate

Re: [sane-devel] Driverless IPP Scanning with SANE - Google Summer of Code 2019

Sounds like a very cool project and way overdue. I wouuld love to be able to follow this project Mark On Tue, Mar 12, 2019 at 10:03 AM Till Kamppeter wrote: > Hi, > > I posted this already last year (see my mail from then below) but there > we finally decided to give preference to other

[sane-devel] How to make a custom app respond to SANE commands?

I have a custom app for a non SANE compatible scanner. I have looked around the web to see what I can find aboy the SANE protocol used for network scanning and have not found much. I am pretty sure a SANE scanner server must advertise certain features to SANE clients and that those messages are

[sane-devel] Custom SANE Backend - Clarification

I wanted to clarify exactly what I meant about a Custom SANE backend in my case. I am not looking for a backend that connects via USB, Network, SCSI, nor parallel. rather what I hope to attain is a back end that connects via binary FILE. I am looking for a backend solution that will execute a

Re: [sane-devel] custom SANE backend

like this http://bastel.dyndns.info/~public/s400w/ and https://github.com/kno10/python-scan-eSCL you load the command line with the options according to the commands needs based on what is selected in the GUI. On Sun, Jan 20, 2019 at 2:48 PM Jeff wrote: > On 20/01/2019 19:55, Mark DM wr

[sane-devel] custom SANE backend

I have a working linux command line utility that controls a scanner and all functions. I was wondering if anyone has made a "generic" backend for custom commands to control a scanner. the idea is to execute the command line utility with the options for the scan. for instance to scan using the

Re: [Alsa-user] Soundblaster Audigy 2 NX- Still buggy after all these years

...@googlemail.comwrote: Mark DM wrote: what I can toggle with amixer and hardware mute on audigy or remote, is not available in any mixer control! That Master Playback Switch thingy _is_ a mixer control. It should be visible in alsamixer (and other mixers) as Master. Is it? I know the xbmc

Re: [Alsa-user] Soundblaster Audigy 2 NX- Still buggy after all these years

: Mark DM wrote: Master Playback Switch is clearly missing from the mixer. amixer controls shows among other items numid=5,iface=MIXER,name='Master Playback Switch' These two statements are contradictory. when I use the remotes mute function (which is also configured to send a mute

[Alsa-user] Soundblaster Audigy 2 NX- Still buggy after all these years

I have an old Creative Soundblaster Audigy2 NX that I would like to use it and the bundled remote for XBMC. I have everything working except I have an hardware mute button as well as mute on remote I have never been able to program the remote in a way to get mute and unmute to work. I believe

Re: [Samba] (Trying) to understand Print properties saving

I have a similar issue with Ubuntu 12.04 based system , not sure of Samba version but it keeps changing default paper to Postscript custom which seems almost square. I change it in windows and apply and it always reverts to postscript custom again On Tue, Jan 1, 2013 at 5:01 PM, Alessandro

Re: [Samba] Update A Compiled Version

He could be using an older distro that never will have it in the repos. I think the bigger question is how will he update it once an update is released if he does compile it, and a I see it that remains unanswered, as I too share the same question. I never trust version X.00, as it is never long

[Samba] NEED Windows 7 64 bit Postscript drivers

Alas I am having success on my third install. I am however missing the Windows 7 64 Bit Postscript drivers. I have the 32 bit but have only one copy of windows that is 32 bit and use mostly Linux It would be greatly appreciated if someone could take them off of an ENGLISH

[Samba] Samba and CUPS pushing generic windows drivers

I have spent weeks battling with Samba and CUPS to get seamless windows printing, and keep hitting bumps along the way So far of two printers on a test systsm, and hp deskjet 920c and a PDF writer on the CUPS machine , only one will export printer drivers _ # rpcclient -U root