Hi
I've an Hercule Gamesurround Muse XL soundcard, which works with the
cmipci module, and Alsa last version being installed with both OSS
compatibility, and sequencer support. fine.
In the INSTALL file inside the drivers directory, the parameters below,
are quoted as being supported by this
hi,
i finally got it working!
i had to do the following
./configure --with-sequencer=no --with-isapnp=no --with-cards=sb16
i was getting sequencer errors
and also i did not have a plug and play sound card.
thanks for all of the help!
randy
On Mon, 10 Dec 2001, Erik W Hanson wrote:
Well
Try plugging the speakers into the correct output jack usually green!
On Mon, 2001-12-10 at 21:05, Brendon Greve wrote:
Hi, I've got a KT133 chipset which as u prob know has an integrated soundcard, PCI
128. After a Tech installed what I believe to be the wrong driver im unable to find a
Hi,
At Tue, 11 Dec 2001 20:34:13 +0100 (CET),
Jean Francois Ortolo wrote:
- configure modules for this card be able to comply with the FM OPL3
standard?
The OPL3 is enabled via module option snd_enable_fm=1. Please check
alsa-driver/doc/CMIPCI.txt.
Yes, are both these
See alsactl store / restore
The alsasound rc script (/etc/rc.d/alsasound) uses this to setup the
sound card. Make sure it's part of your startup:
chkconfig --list alsasound
chkconfig --add alsasound
chkconfig --list alsasound
Works for me here. Failing that, if you're using redhat, create
On Thursday 01 Jan 1970 12:59 am, you wrote:
On Tue, Dec 11 2001 at 08:33:26pm +, andrew cooke wrote:
- unless I run modprobe snd-card-ice1712, no modules are loaded. How can
this be done automatically? I assume I have to put something in a file
in /etc/modutils, but it's not clear
Hi Sir
I've installed timidity 2.10.4 last version from
http://www.goice.co.jp/member/mo/timidity/
then installed a Gus extended patch for timidity.cfg
from a link I picked up in
http://www.goice.co.jp/member/mo/timidity/link.html#gus
Jazz works very well now.
The sounds are pretty
On Thursday 01 Jan 1970 12:59 am, you wrote:
andrew cooke hat gesagt: // andrew cooke wrote:
I had compiled alsa from source because I'm using my own patched (2.14.14
with preemptive and ext3) kernel and so presumed that I needed to
recompile rather than load a .deb, but I really don't
Hello!
When I had written to address which is written on the web page I have anser that my
email is not subscribed to the list, but all time I get new mails.
Could someone help me?
Regards, Sevi.
___
Alsa-user mailing list
[EMAIL PROTECTED]
Hello Gerard,
Searching the alsa-user list produces a lot of confusion about using our brilliant RME
digi 96/8 card in a multi-channel configuration. You seem to be the most successful,
although I am not sure I have found the most recent messages regarding the subject.
Q1. Can you enlighten
Hi Frans,
Somehow the tips you gave me are a major
breakthrough! The advice you gave me to change the clock rate worked (somehow).
Hope I did it right:
alias snd-card-0 snd-card-intel8x0
snd_ac97_clock=41194
= i hear a sound!
But; I have tested in multi-user mode (init 3) and
KDE (init 5),
hello
everybody,
has
someone experience with the ESS Technology ES 1988 Allegro-1 (rev
12)and Suse Linux 7.3 prof ?I tried to install the sound
oprion on my notebook (medion MD9580) viaalsaconf, but the sound
doesn`t work.During the installation, there were no
Hi,
I did some more research on my problem. It seems, that after a random time of
any sound application running (e.g. freeamp playing mp3), the soundsystem
hangs (- no sound), and the soundapplications are mostly no killable (this
leads me to the assumption that the kernel is doing sth for
(Trying again, to the list, this time. slaps self)
On 12-Dec-01, Nathan A. Smith wrote:
Some of the alsamixer settings seem to work and others (most) don't
do anything. Specifically, EMU10K1 PCM works like the master volume
(the actual master volume doesn't do anything) and the wave surrond
On 12-Dec-01, andrew cooke wrote:
But can't the cd player stream data from the CD and run it through the
card's DAC? If I've got an expensive audio card I don't want to be
listening to music through the scratty DACs that come with my OEM CD
reader. Is there a suitable program for doing this,
Title: Äã×¼±¸ºÃÁËÂð£¿
Ϊ¸öÈËÊÂÒµ×ö´òË㣬ѡÔñ¹Øϵͨ2.0
Hi!
today I desided to give alsa a try with my subj I downloaded the latest version
(0.9.0 beta10) compiled it, installed with\out any problems. The driver loaded
fine.After that it took me some time to figure out that it's muted by default, and
that's when the problems began. The problem is,
On Wed, 12 Dec 2001, Stanislav Kogan wrote:
Hi!
today I desided to give alsa a try with my subj I downloaded the
latest version (0.9.0 beta10) compiled it, installed with\out any
problems. The driver loaded fine.After that it took me some time to
figure out that it's muted by default, and
Hi!
Hmm, that's interesting. A dumb question: How do I turn on the OSS emulation mode?
On Thu, 13 Dec 2001 11:08:21 +1100 (EST)
Lucas Hope [EMAIL PROTECTED] wrote:
On Wed, 12 Dec 2001, Stanislav Kogan wrote:
Hi!
today I desided to give alsa a try with my subj I downloaded the
On Wed, 12 Dec 2001, Stanislav Kogan wrote:
Hi!
Hmm, that's interesting. A dumb question: How do I turn on the OSS
emulation mode?
its an option in the configure script.
Do ./configure --help to get a list of all the options available.
There's something like --oss-emulation=yes
--
I use alsa sound with SuSE 7.3 on my new laptop, which has an Intel 815 or
compatible chipset. For a couple of reasons I am upgrading SuSE's 2.4.10
kernel to a more recent one, but I have encountered problems.
First of all, i810 sound is completely broken in the latest stable kernel,
which is
On Wed, 12 Dec 2001 19:35:43 +0100
Örjan Persson [EMAIL PROTECTED] wrote:
hey,
I've been using alsa 0.4 for a year or so with
my CS4236 card, builtin on the board. It's a dell
OptiPlex GX1 computer running Debian Sid.
Now I upgraded my kernel to 2.4.16, added devfs
support, kernel
I just installed alsa-driver-0.5.12a, alsa-lib-0.5.10b, and
alsa-utils-0.5.10 on a kernel 2.4.16 system. No devfs.
1) To compile alsamixer, I needed to make the following change to the
generated makefile to get rid of link errors:
--- alsamixer/Makefile.oldWed Dec 12 22:47:52 2001
+++
23 matches
Mail list logo
