Hi list,
I discover problem with RunAfterJob directive in version 2.0.2.
I have next directive in Job resource:
RunAfterJob = /etc/bacula/scripts/disk_check.sh %j
and the script disk_check.sh is following:
size=`/usr/bin/mysql -e select JobBytes from Job where Job='$job' -u
bacula -D bacula
On Wed, 7 Mar 2007 13:06:15 -0800 (PST)
Kel Raywood [EMAIL PROTECTED] wrote:
A few weeks ago there was a short thread on a similar theme. See
http://article.gmane.org/gmane.comp.sysutils.backup.bacula.general/31927
and other posts in the thread.
Hmmm... I think I had seen this one, but am
Hi
My Scsi Card is an Adaptec ASC-19160, and I have a HP Surestore DAT 40i
(C5686A). Both items are over four years old (Oct 2002) so maybe either/both
items do need replacing. It's a last resort thing to do though. Are there any
troubleshooting tips first?
-- Regards
Alan To
From:
07-Mar 21:32 Server-dir: RunBefore: 3901 open device failed:
ERR=dev.c:289 stored: unable to open device /dev/nst0: ERR=Input/output
error 07-Mar 21:32 Server-dir: RunBefore:
07-Mar 21:32 Server-dir: RunBefore: You have messages.
07-Mar 21:32 Server-dir: RunBefore: exit
Hi Dan, Hi All
It is slightly difficult to check [movement] as the server is on a separate
site to where I am based. Anyway I have just catalogued my scsi devices and
yes, it is there/detected:
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ADAPTEC
Hello,
I am with bacula installed in one linux opensuse 10,0 functioning well…
but I am with one doubts: Backup is made in disk, each server that I
make backup has a own volume . Backup FULL is made a time for month and
the Incremental one is made daily. The problem is that backup FULL is
not
Wiadomość Oryginalna
Od: Arno Lehmann
Do: bacula-users@lists.sourceforge.net
Data: 7 marca 2007 21:51
Temat: Re: [Bacula-users] EXABYTE 110 L autochanger problem
gt; Hi,
gt;
gt; On 3/7/2007 8:43 PM, Alex wrote:
gt; gt; Hi !
gt; gt;
gt; gt; I'm trying to run my autochanger
Hiya,
I'm in the process of setup up bweb on my bacula server as the last step
in upgrading Bacula to 2.0.x.
However I've run into some problems I suspect are caused by my use of
MySQL 3.
I've followed the install instructions and can browse the main bweb
page, but several of the other pages
Hi again,
Forgot to mention I'm using bweb from the 2.0.3 tarball available on
Sourceforge currently.
Troy.
Troy Daniels wrote:
Hiya,
I'm in the process of setup up bweb on my bacula server as the last step
in upgrading Bacula to 2.0.x.
However I've run into some problems I suspect
Hello Scott,
Is this problem related to the fact that he was upgrading two database
versions? I.e. can a 2.0.x rpm do a double database upgrade? I wonder if he
should first try updating to 1.38.11 then do the update to 2.0.x??
On Thursday 08 March 2007 00:12, [EMAIL PROTECTED] wrote:
On Thursday 08 March 2007 13:53, Troy Daniels wrote:
Hi again,
Forgot to mention I'm using bweb from the 2.0.3 tarball available on
Sourceforge currently.
Troy.
Troy Daniels wrote:
Hiya,
I'm in the process of setup up bweb on my bacula server as the last step
in upgrading Bacula to
Hi all,
Just after some advice about a HP SureStore E AutoLoader 818 I just
picked up today second hand.
The seller I purchased it from on ebay has mentioned that the drive had
been tested and confirmed to be working ok but I'm having no joy.
I am able to backup a small amount of data via
Hi list,
I was just hitting a little confusing problem in backing up a Windows
2003 Server with bacula (both client and server have version 2.0.2
running).
The Server is configured to backup C: and D:, the FileSet has Enable
VSS = yes defined. The client has been installed with winbacula.exe
What: The ability for the director to validate a Client (FD) CN against
an arbitrary set of patterns (cf. TLS Allowed CN options for
clients), rather than the hostname.
Why: DNS is not secure. Also, computers may move to new networks, and
local policy may tie hostnames to
On 3/6/07, Jansen,Quinton [PYR] [EMAIL PROTECTED] wrote:
Would that be the LSI22320-R? I take it the RAID is not causing any
problems.
Check that the SCSI HBA supports multi-LUN.
Tape changers often need it, and RAID controllers usually don't have it :-)
Cheers
--
Maxx
Hi list,
I discover problem with RunAfterJob directive in version 2.0.2 and now
in 2.0.3 too.
I have next directive in Job resource:
RunAfterJob = /etc/bacula/scripts/disk_check.sh %j
and the script disk_check.sh is following:
size=`/usr/bin/mysql -e select JobBytes from Job where Job='$job' -u
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I think I already asked this one but can't recall getting an answer to it:
While playing around in bweb, I found an 'add autochanger' button,
clicking it, I found a form to fill in with an empty drop down box (not
showing my autochanger). I traced
Hello everybody!
I searched in the list for similar problems with backups to tape.
What I want to do is migration of jobs to tape with a Tandberg LTO-2
SCSI drive.
First of all I use bacula 2.0.2 on NetBSD 3.0.1 on a standard PC.
At the beginning, I ran the btape program and it suggested to
Frank Altpeter wrote:
Hi list,
Hi Frank!
I was just hitting a little confusing problem in backing up a Windows
2003 Server with bacula (both client and server have version 2.0.2
running).
The Server is configured to backup C: and D:, the FileSet has Enable
VSS = yes defined. The
I got bacula-2.0.3 and configured and installed
check_bacula. Now I am getting this error - BACULA
CRITICAL - Cannot authenticate to FileDaemon: 1999
Authorization failed. I am not using a md5-hash in my
configuration. I convert my password to a md5-hash,
but it does not work. What am I doing
On 8 Mar 2007 at 8:03, Zakai Kinan wrote:
I got bacula-2.0.3 and configured and installed check_bacula. Now I am
getting this error - BACULA CRITICAL - Cannot authenticate to
FileDaemon: 1999 Authorization failed. I am not using a md5-hash in my
configuration. I convert my password to a
Hello,
Unless I am mistaken, even if there is a duplicate CN as you fear, it seems to
me it should pose no problems because the certificate would not match.
Does someone more experienced with TLS know the answer to that?
Best regards,
Kern
On Thursday 08 March 2007 15:00, Jorj Bauer wrote:
Hello,
I issued several restores on different jobs, and one of them failed, but
I can't know what was being restored because the name is just
RestoreFiles. Any advice?
Thanks in advance
-
Take Surveys. Earn Cash.
On Thu, 8 Mar 2007 12:06:45 +, Alan To said:
Hi Dan, Hi All
It is slightly difficult to check [movement] as the server is on
a separate site to where I am based. Anyway I have just catalogued my scsi
devices and yes, it is there/detected:
# cat /proc/scsi/scsi
Attached devices:
Hi,
On 3/8/2007 2:38 PM, Gerard Sharpe wrote:
Hi all,
Just after some advice about a HP SureStore E AutoLoader 818 I just
picked up today second hand.
The seller I purchased it from on ebay has mentioned that the drive had
been tested and confirmed to be working ok but I'm having no
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
For exactly the reason you state, I believe that it is not possible for bweb
to work with MySQL version 3, which is *very* old (by Open Source standards)
now. It will probably work with version 4, which does implement subqueries
(if I remember
Good questions.
The backups run concurrently, so the only waiting is on the max jobs
parameter. But, yes, more than one job is written to the tape at the
same time. This also keeps the data rate up and the tape drive busy, so
even if one client slows down momentarily the drive won't have to
Hi All,
I too have switched off a few machines lately, and wish to save their
last complete backup to an Archive pool. Basically, I want to migrate a
few jobs from my Weekly pool to my Archive pool. Fortunately, I too
have one last full backup in the system, but since I only have one tape
Hi,
For exactly the reason you state, I believe that it is not possible for bweb
to work with MySQL version 3, which is *very* old (by Open Source standards)
now. It will probably work with version 4, which does implement subqueries
(if I remember right). I am *sure* it works on MySQL
I'd like to purchase an autoloader to run with bacula. I need to do up
to 2tb a night and I'd like to look at the models that work best with
this software. Any offhand recommendations on hardware/tape format?
Thanks!
Paul
On Friday 09 March 2007 00:23, Scott Barninger wrote:
PS. No, the rpm packages can only do a single database version upgrade.
If an older version is detected it will abort and instruct the user to
upgrade the database with the scripts in the updatedb package.
OK, that explains things.
Dave,
On Friday 09 March 2007 03:34, Troy Daniels wrote:
Hi,
For exactly the reason you state, I believe that it is not possible for
bweb to work with MySQL version 3, which is *very* old (by Open Source
standards) now. It will probably work with version 4, which does
implement subqueries (if
On Friday 09 March 2007 02:33, Mike Seda wrote:
Hi All,
I too have switched off a few machines lately, and wish to save their
last complete backup to an Archive pool. Basically, I want to migrate a
few jobs from my Weekly pool to my Archive pool. Fortunately, I too
have one last full backup
33 matches
Mail list logo