Great, that sounds promising :-)
Unfortunately, with 3.13.0-rc3 USB currently does not seem to work at all
(also no ethernet).
On Tuesday, November 26, 2013 10:07:20 PM UTC+1, RobertCNelson wrote:
On Tue, Nov 26, 2013 at 2:12 PM, thoma...@gmail.com javascript:
wrote:
Well, I've checked
maybe a compiler flag difference in the packages such as one was built
with 03 the other 02?
Just a guess
On 12/07/2013 09:43 AM, thomas.z...@gmail.com wrote:
I can confirm that HW acceleration is working with 3.13-rc3 ...
however it is way slower (9 MB/s) than the SW AES, especially the new
Ah, I understand. Hopefully it's just a bug that will eventually get fixed.
Thanks so much for taking the time out to help me. Have a great day, Pablo!
On Saturday, December 7, 2013 11:57:37 AM UTC-5, Pablo Oyarzo wrote:
Hi!
Glad it worked! Now, i have the same problem. i resolve it
hi, i am trying to flash the eMMC from SD card.i have downloaded the image
file from
https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.09.04.img.xz
. i used 7zip to make to convert to .img file and wrote the img file using
win32 disk imager . then when i put the sd card
I have recently acquired an OLPC XO-1, the small form factor one laptop per
child computer, and had some thoughts about some modifications and wanted to
see if anyone else thought it might be possible.
My idea is to take the motherboard out of the OLPC and mount the BeagleBone
Black inside
Power switch is connected to the PMIC. It generates and interrupt to
the processor. So it can be detected by SW.
Gerald
On Sat, Dec 7, 2013 at 6:18 AM, Satz Klauer satzkla...@googlemail.comwrote:
Hi,
when I'm not wrong the boot-switch of the BBB is connected to GPIO0[22] so
that it could
I installed textinfo 4.13a from source and it took care of the problem on
fedora 19. Hope that helps if you want to use v2012.12.
On Wednesday, November 27, 2013 11:42:14 AM UTC-7, chmo...@gmail.com wrote:
And to clarify and correct, I was wrong with the branch. It is
Try removing C24. See if that helps.
Gerald
On Sat, Dec 7, 2013 at 7:01 AM, davem...@gmail.com wrote:
We are experiencing the same issue, using the A5 version. Roughly 1% to 3%
of the times on boot up, the unit fails to find the PHY. On next boot up
works fine.On very very rare occasions,
From: miroz2...@gmail.com
Reply-To: beagleboard@googlegroups.com
Date: Friday, December 6, 2013 at 9:36 PM
To: beagleboard@googlegroups.com
Subject: Re: [beagleboard] Running from eclipse as root?
Ugh, I didn't explain this properly. My code running on beagle requires root.
When using
I understand that and I realize there are ways of doing it, but for early
development this is the simplest way of doing it.
Thanks,
Miro
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
Hey,
I just purchased a beaglebone black and have just began tinkering around
with it. I have gotten a button to turn on and off a led light but wanted
to alter this a bit. I have written some code to turn the led on after the
first push, blink after the second, and turn off after the third.
Apparently, it's unrealistic to expect good performance from dm-crypt with
HW acceleration, given that it uses a block size of 512 bytes:
http://code.google.com/p/cryptsetup/issues/detail?id=150
On Saturday, December 7, 2013 6:43:51 PM UTC+1, thoma...@gmail.com wrote:
I can confirm that HW
That's why this group exist! haha! And it's my pleasure! :)
-Pablo Oyarzo
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from
Hello all.
First off, I'd like to thank the community for their continuing help!
I'm trying to get understanding on many things at once here, so I'm going
to fire off a series of questions. Please bear with me here :)
1. What is the best way of enabling uart1, 4 and 5, i2c1 and 2 and spi1?
Hi
How i can order this board... actually i already order one but
myus the mail forwarder inform me that board need a special licence to
export..
I do little search over Google i found the eccn 5A002A1 need long procedure
with a lot of paper work.. and its need to be done from the seller side
You need to go to a distributor that will sell to you. It is up to them
to decide and up to you to comply with all the paperwork if possible. That
complexity is not likely to make it worth the extra effort for
most distributors to sell it to you in Saudi Arabia. I suspect the UK will
have the same
To answer my own questions 1, 4 and 5 here's the link that makes this very
clear:
http://learn.adafruit.com/introduction-to-the-beaglebone-black-device-tree/exporting-and-unexporting-an-overlay
This is easier than I thought. I'm loving it!
That leaves 2 and 3:
2. Where is uart3_rxd?
3. I'd
Hi All
I want to attach both the P8 and P9 headers to ribbon cables and connect
these to a separate PCB (Through hole on a vero board actually)
I'm intending to get 2 female connectors (with through-hole pins...for the
vero board), ribbon cable, 4 male connectors.
The array of connectors
The connectors are 2.54 spaced pin to pin and 2.54 spaced from row to row.
https://github.com/CircuitCo/BeagleBone-Black-RevA5C/blob/master/BBB_BOM.xls?raw=true
I do not know of any 46 pin ribbon male ribbon cables, but I have not
really spent anytime looking for them.
Gerald
On Sat, Dec 7,
I just got a Micro-HDMI cable and DVI adapter and plugged the BeagleBone
Black into my 4-port KVM switch. The KVM is USB2.0 and VGA, so I am
connecting the Keyboard and mouse through it, but the uHDMI-out goes
directly to a DVI converter then the monitor. This means I have to
physically
Thank you for your fast replay
I'm ready for all the paper work even if it necessary to visit the us
embassy
i have a good project for healthcare sector to avoid the human mistakes..
i can provide for the us gov a headlines for my project
i need a test platform...
comparing to the arms
Thank you for your fast replay
I'm ready for all the paper work even if it necessary to visit the us
embassy , i have a good project for healthcare sector to avoid the human
mistakes..
i can provide for the us gov a headlines for my project and any document
they ask for..
i need a test
Digikey, Mouser, and Farnell may be your best bet. They ship
internationally.
Gerald
On Sat, Dec 7, 2013 at 8:28 PM, nassersha...@gmail.com wrote:
Thank you for your fast replay
I'm ready for all the paper work even if it necessary to visit the us
embassy
i have a good project for
I don't know if if there were changes that could impact this, but the image
you are using is a little on the old side. You could try the latest version
and get a different result.
http://www.elinux.org/Beagleboard:Updating_The_Software
Generally speaking, if the SW can't read a EEPROM, HW
i powered up the board using a usb hub.
On Saturday, December 7, 2013 7:50:59 PM UTC+6, ss sefat wrote:
hi, i am trying to flash the eMMC from SD card.i have downloaded the image
file from
https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.09.04.img.xz.
i used 7zip to
i powered the board from a usb hub.
On Sunday, December 8, 2013 1:53:34 AM UTC+6, Gerald wrote:
Did you follow the instructions on the Support Wiki? You are not supposed
to flash using USB power, so I am not sure you did..
Check the instructions and follow them exactly.
i deleted the MLO file of a running OS.then tried to flush a new OS.but i
cant . what would be the solution .PLZ help me.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe
if you are using 3.12 the uart is broken
https://github.com/RobertCNelson/linux-dev/issues/16
On Sat, Dec 7, 2013 at 10:15 PM, Miro miroz2...@gmail.com wrote:
To answer my own questions 1, 4 and 5 here's the link that makes this very
clear:
Haha, well, darn, just as I thought I caught the break... What does it mean
to manually patch the dtb file and add ttyO1?
Miro
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To
I think doing a new device tree for ttyO1
On Sun, Dec 8, 2013 at 3:16 AM, Miro miroz2...@gmail.com wrote:
Haha, well, darn, just as I thought I caught the break... What does it
mean to manually patch the dtb file and add ttyO1?
Miro
--
For more options, visit
30 matches
Mail list logo
