Thanks for your response.
Boot select button is having no effect...
U-boot is a valid one, since the card has booted from it without any issue
from SD-Card...
Any other suggestions?
Thanks
--Geetha
On Monday, October 28, 2019 at 10:26:32 PM UTC+5:30, Dennis Bieber wrote:
>
> On Mon, 28 Oct
Thanks Robert. I have been able to get things working. I have one doubt.
Having run this script at bootup, the idea for me is to have a single
gadget (with single function) to be detected on the Windows host. On
Windows when I run the script similar to the one you pointed out, I see 2
entries
On 29/10/19 11:41 am, Michael B wrote:
> Another potential path is booting from u-boot to tftp or nfs. h...
Setting up a TFTP server and an NFS server is not rocket science.
Network booting is a trick that has proven itself very handy time and
time again.
--
Stuart Longland (aka Redhatter,
Another potential path is booting from u-boot to tftp or nfs. h...
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from
Reading this article to create a uboot on a card.
Does this seem like it's the right path?
Thanks a ton for the advice.
https://github.com/bootlin/training-materials/blob/master/lab-data/common/bootloader/beaglebone-black/README.txt
--
For more options, visit http://beagleboard.org/discuss
It looks like it is trying to flash again.
So I guess I'm back to my question of how to change the auto flash setting
when I can't get access to the setting?.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
U-Boot SPL 2016.03-1-g148e520 (Jun 06 2016 - 11:27:44)
Trying to boot from MMC
bad magic
U-Boot 2016.03-1-g148e520 (Jun 06 2016 - 11:27:44 -0500), Build:
jenkins-github_Bootloader-Builder-395
Watchdog enabled
I2C: ready
DRAM: 512 MiB
Reset Source: Power-on reset has
I was able to grab a bit higher up than before.
It looks like it's trying to flash again even though the flash card isn't
inserted.
-
Starting eMMC Flasher from microSD media
Version: [1.20160606: run bb-wl18xx-wlan0 in single user mode...]
On Mon, Oct 28, 2019 at 6:49 PM Michael B wrote:
>
> The boot scrolls past and I can't grab it all.
> Using osx in terminal.
>
> If I put the micro sd into an adapter and plug into a computer it isn't
> mountable as it's a flash image of the bb that I am trying to get to run as
> opposed to a
I flashed this version - unless I messed it up of course:
bone-debian-9.9-iot-armhf-2019-08-03-4gb.img.xz
On Monday, October 28, 2019 at 7:49:04 PM UTC-4, Michael B wrote:
>
> The boot scrolls past and I can't grab it all.
> Using osx in terminal.
>
> If I put the micro sd into an adapter
The boot scrolls past and I can't grab it all.
Using osx in terminal.
If I put the micro sd into an adapter and plug into a computer it isn't
mountable as it's a flash image of the bb that I am trying to get to run as
opposed to a drive I can write to.
I tried to > screen to a file and the
On Mon, Oct 28, 2019 at 4:53 PM Michael B wrote:
>
> Some success in that I now have a serial cable connecting and can watch the
> flashing and booting.
> I am still never getting the drive to show up as an external disk where I can
> change the settings to not do a flash when a card is
Some success in that I now have a serial cable connecting and can watch the
flashing and booting.
I am still never getting the drive to show up as an external disk where I
can change the settings to not do a flash when a card is inserted.
I am getting the error below. I googled a bit and it was
Title: TalentHire - Simplified Recruiting and Staffing
Hi,
Hope you’re doing well!
This is Sai Kumar from Indotronix International Corporation (IIC). We are
On Mon, 28 Oct 2019 02:11:11 -0700 (PDT), in
gmane.comp.hardware.beagleboard.user Geetha
wrote:
>Now, the BBB is neither booting from eMMC nor from SD-card. It gives out
>"C" on Serial output. However, the same SD card used in another BBB is
>booting fine with QNX.
>
>How do I get the
Thanks so much! This will help my Element14 Contest immensely!
blinkLED.js works with p9.15.
You wouldn't have a PWM out and analog in mapping would you?
Thanks,
Sean
On Thursday, October 24, 2019 at 1:01:25 PM UTC-5, Jason Kridner wrote:
>
> Realized I hadn't published the work already done
Hello.
I have one question.
The size of DDR memory on the BBB board is 0x2000.
# hexdump -C '/proc/device-tree/memory@8000/reg'
80 00 00 00 20 00 00 00 | ...|
0008
I know that the DDR memory size passes from u-boot to Linux when the BBB
Title: TalentHire - Simplified Recruiting and Staffing
Hi,
Hope you’re doing well!
This is Sai Kumar from Indotronix International Corporation (IIC). We are
When will BeagleBone AI "rev A2" be available for purchase? Is there any
anticipated release date in a near future?
It seems that current "rev A1a" has some issues with its JTAG connections
which will be hopefully corrected in "rev-A2".
--
For more options, visit
After a fresh reboot, I get the following error on first run of
blinkLED.js, but it then runs fine when I run again until the next reboot:
Debugger listening on 127.0.0.1:15454
fs.js:642
return binding.open(pathModule._makeLong(path), stringToFlags(flags),
mode);
^
Error:
I get the same error as well. Updated everything and rebooted a couple of
times.
On Wednesday, October 23, 2019 at 11:37:39 PM UTC-5, jonnymo wrote:
>
> I've pulled in the changes but now I get the following error when
> attempting to run the TIDL example from the Cloud9 IDE.
> NOTE: I've
I have been using BBB with QNX, booted from the SD Card. The SD Card is
FAT32 formated with the following files
MLO, u-boot, uEnv & qnx-ifs. I have been running many applications
without problem..
I wanted to port QNX to eMMC so that by default it boots from the eMMC
so that SD card
22 matches
Mail list logo
