-home=/usr --with-lang=it --with-x
or anyone can understand the reason of this strange behaviour?
Thanks, Alessandro.
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
Hy,
yes you're right, a ln -s is more clear solution.
Thanks, Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
!
but this is a precompiled binary from a driver packet for my printer
that installed also a couple of kernel-modules and I wasn't able to solve
the problem (but the modules works well and I don't mind about the program)
but this seems to be a real glibc problem.
Alessandro
--
http
the LD_PRELOAD variable at the beginning of the soffice
script works well.
I'm also planning to build my third LFS, I have build the
current on march and is the Linux distribution that I use
daily (let me take this circumnstance to thank all the
LFS/BLFS community for this wonderful work)
Alessandro
this because i have seen that sound-juicer is a
new-entry in the book)
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
have just made some new mp3 from a cd)
Thank you very much and excuse me again for my
newby-hurry
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
/consolefonts
/usr/share/kbd/keymaps/i386/
(I'm not sure if the french keybord is qwerty or azerty)
Hope this help,
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
`
--localstatedir=/var/lib --sysconfdir=/etc/gnome
yelp seems to work well.
In fact I have only mozilla installed, neither firefox, nor thunderb.
so i'm not sure if the problem is mozilla vs. firefox or other.
Regards,
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ
be disabled before
playing the movie; then re-enabled after MPlayer exits.
Can anyone tell me how to modify the cursor so that it doesn't blink?
Use
setterm -cursor [on|off]
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
: #include pthread.h
Hope this helps,
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
file for dbus,
so I have just correct my init-script, but in fact I think
that is missing this switch in configure:
--with-system-pid-file=/var/run/dbus/dbus.pid
(or perhaps I'm missing something?)
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http
a little java programs,
but I have compiled several java bindings in other programs, and Ant.
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
you wrote:
Alessandro wrote these words on 01/02/06 07:50 CST:
Hi all, I'm just rebuilding my system and I have noticed
a little problem stopping the daemon.
In fact in /etc/rc.d/init.d/dbus I have:
rm /var/run/dbus/dbus.pid
You wouldn't if you downloaded the blfs-bootscripts tarball
this problem or it's due to something i'm
missing. (Also, sorry if this was discussed before, I tried to search the
mail-list but I haven't found anything).
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See
On Wednesday 4 January 2006 01:16, Randy McMurchy wrote:
Alessandro wrote these words on 01/03/06 18:23 CST:
Hi all, I have just compiled Gnome-2.12.1 and playing around with
my new desktop I have found that trying to change a theme doesn't give me
the expected result. Then reading again
I'm building? Any
advice appreciated.
I have libtiff installed with opengl support and also the nvidia opengl
version. I have never seen compilation problems with libtiff so I can't help
more. (However, have you installed freeglut?)
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo
ekiga-1.99.1 with pwlib-1.9.3 and
opal-2.1.3, I just report this in case someone wants to check the problems
above and possibly correct the book.
Regards, Alessandro Alocci
*** src/common.h.orig 2006-02-28 15:32:00.0 +0100
--- src/common.h 2006-02-28 15:32:24.0 +0100
this on weekend and if I can find a working solution
I'll post here.
HTH, Alessandro Alocci
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
Alle 00:15, sabato 18 marzo 2006, Alessandro Alocci ha scritto:
Alle 20:56, giovedì 16 marzo 2006, randhir phagura ha scritto:
I intend booting the new lfs system from the host system. The host system
has hda (the main hard drive), hdc (the dvd-rom) and the IBM Microdrive
mounted on SanDisk
-linux.so.2 (0xb7f97000)
libdl.so.2 = /lib/libdl.so.2 (0xb7c5a000)
About other programs, I tried also x11rec
http://0xcc.net/x11rec/
and Istanbul
http://live.gnome.org/Istanbul
but xvidcap seems to
work a little better, at least for me ;-)
Alessandro Alocci
--
http://linuxfromscratch.org
About other programs, I tried also x11rec
http://0xcc.net/x11rec/
and Istanbul
http://live.gnome.org/Istanbul
but xvidcap seems to
work a little better, at least for me ;-)
Alessandro Alocci
Just a postscript, searching a little I have also find this:
http://www.debugmode.com/wink
character set I have the euro (€) sign.
HTH, Alessandro Alocci
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
Alle 07:50, lunedì 19 giugno 2006, Uwe Kramer ha scritto:
Am Montag, 19. Juni 2006 00:42 schrieb Alessandro Alocci:
You wrote,
I have a blfs-book-cvs-2006-06-08 system with KDE-3.5.3 and I cannot
get the euro-sign anywhere. It works on the text console and with twm,
I can also start
Alle 00:52, lunedì 19 giugno 2006, Dan Nicholson ha scritto:
On 6/18/06, Alessandro Alocci [EMAIL PROTECTED] wrote:
Another little issue, not all characters seems to be able to show the
euro sign, if I start konsole and select for example Courier 10 Pitch
I don't see anything pressing AltGr
the same in .kde/share/config/gtkrc-2.0,
this seems to be the file to use for gtk2 based application.)
Another way you can try is write a script, give him exec permissions
and put it in .kde/Autostart, the script will be executed at every
kde startup.
HTH, Alessandro Alocci
--
http://linuxfromscratch.org
Alle 21:14, venerdì 14 luglio 2006, Randy McMurchy ha scritto:
Alessandro Alocci wrote these words on 07/14/06 14:01 CST:
Hi, the configure for expect is:
./configure --prefix=/usr \
--with-tclinclude=/usr/include \
--enable-shared
but it seems that is missing
Alle 23:37, venerdì 14 luglio 2006, Alessandro Alocci ha scritto:
gcc -pipe -c -I. -I. -I/usr/include -I/usr/X11R6/include
-DEXP_VERSION=\5.43.0\ -DSCRIPTDIR=\/usr/lib/expect5.43\
-DEXECSCRIPTDIR=\/usr/lib/expect5.43\ -DTCL_DEBUGGER -DUSE_NON_CONST
-DSTTY_BIN=\/bin/stty\ -march=pentium4
Alle 00:26, sabato 15 luglio 2006, Alessandro Alocci ha scritto:
Dbg.c:13:22: error: tcldbgcf.h: No such file or directory
In fact tcldbgcf.h is created at compile time from tcldbgcf.h.in
but only if I pass the switch --with-tcl (at least in my case).
Sorry again for all this noise, I really
this to see if it works:
export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/X11R6/lib/pkgconfig
HTH, Alessandro Alocci
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
:
*** Can't link to Pango. Pango is required to build
*** GTK+. For more information see http://www.pango.org
If you have Pango installed and configure can't link
with its libraries maybe you simply forgot to run
/sbin/ldconfig
Just a guess, though.
Alessandro Alocci
--
http://linuxfromscratch.org
there was a patch about this in previous version
of BLFS book that is no more in the book because they switched
to libexif-0.6.13.
Try the patch or consider to switch to the newer version of libexif.
Alessandro Alocci
Submitted By:Randy McMurchy randy_at_linuxfromscratch_dot_org
Date
available:
--enable-lib64=yes/no Enable lib64 support default=no
Alessandro
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
headers and older (2.3) glibc.
Hi, sys/capability.h is installed from libcap and in this version of
capability.h are also defined CAP_EFFECTIVE and CAP_SET.
Maybe you want to have a look at the file, this is from a
libcap_1.10.orig patched with a
libcap_1.10-14.diff from debian.
Alessandro Alocci
to your /etc/dbus-1/system.d/hal.conf
and restarting dbus and haldaemon can be useful.
HTH, Alessandro Alocci
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
Richard Melville wrote:
I still have one small problem however. The little alsa.dev script is
not being read at boot time, which means I have to manually run alsactl
restore every time I reboot. Does anybody have any ideas. I just
cannot see why this is happening.
The command should be
On 12:12 Tue 19 Sep, alberto hernando wrote:
I'd like to build kopete 0.12.2 for kde 3.5.4 with jingle support.
According to the requirements:
http://wiki.kde.org/tiki-index.php?page=Kopete+Jabber+Jingle
I need oRTP 0.7.1, exactly that version.
Hi, you can find a precompiled version of
On 11:50 Thu 21 Sep, Luca wrote:
However I think it is something deeper, in fact, making check for Gc6.6
reports this error:
gcc -DPACKAGE_NAME=\gc\ -DPACKAGE_TARNAME=\gc\
-DPACKAGE_VERSION=\6.6\ -DPACKAGE_STRING=\gc\ 6.6\
-DPACKAGE_BUGREPORT=\[EMAIL PROTECTED] -DGC_VERSION_MAJOR=6
On 14:11 Thu 21 Sep, Luca wrote:
Hi, can you check if you really have
/usr/local/lib/libpthread.so ?
So, maybe you have another libpthread conflicting with the libpthread
from glibc (from the pth package?), or if you have not a
Hi Alessandro,
I've just noticed that in fact I have
-context
#endif
and in libgnome/Makefile*:
-DG_DISABLE_DEPRECATED
but no idea if it's related with your problem or not.
Good luck, Alessandro.
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
is supplying the PATH? Can't figure out how this
happened. Where should I fix this?
Hi, /etc/security/pam_env.conf is installed so by default.
You can use:
su -
(notice the minus sign after the su command) to obtain the same
environment you have at login.
Alessandro Alocci
--
http://linuxfromscratch.org
procedure in LFS-SVN.
By now I have manually installed utsrelease.h and substituted
#include linux/version.h
with
#include linux/utsrelease.h
in getkversion.c, but this is just a workaround and I don't
know if I'm missing something, so any suggestion about this
will be greatly appreciated. :-)
Alessandro
in:
Seems to confirm that there's no need to build getkversion.
So, a simple sed will do the trick:
sed -i '[EMAIL PROTECTED] @@' tools/Makefile.in
Thanks for the pointing.
Alessandro Alocci
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Alle 23:33, giovedì 7 dicembre 2006, Jerzy Goca ha scritto:
My sound card does not probably this capability. I'll give Timidity a try.
If I remember well, audacious should be able to use timidity to play midi
files.
It was complaining about fluidsynth...
That's true, I'm used to use
Alle 23:11, venerdì 8 dicembre 2006, Jerzy Goca ha scritto:
The sound quality from fluidsynth is not very good, much worse than with
timidity with eawpats.
(May be I had wrong soundfonts) So I decided to uninstall fluidsynth.
I compiled timidity again with
Jerzy Goca wrote:
I compiled timidity again with
--enable-audio=default,alsa,arts,esd,vorbis,oss and
--enable-interface=alsaseq
and launched it as alsa sequencer client.
timidity -iA -B8,2 -Os
It works, but it is very processor hungry
Reading again your mail I see you use -B8,2 for
I have ffmpeg-0.4.9-p20061016 installed ATM, but without that patch I obtained
the same error.
Alessandro Alocci
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
and libmpeg3-1.7.
Alessandro Alocci
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
and
if you have the previous udev rule in 25-lfs.rules.
Also check if you have /var/tmp directory properly installed:
[EMAIL PROTECTED]:~$ ls -ld /var/tmp
drwxrwxrwt 5 root root 4096 27 mar 13:50 /var/tmp
HTH, Alessandro Alocci.
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http
coreutils in /bin.
(See the coreutils install page in LFS)
Alessandro Alocci
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
] Error 1
Hi, you need a little patch to compile hal-0.5.7.1 with newer version of
dbus. Download this patch from:
http://sources.gentoo.org/viewcvs.py/gentoo-x86/sys-apps/hal/files/hal-0.5.7.1-dbus-close.patch?view=markup
and apply with:
patch -Np1 -i ../hal-0.5.7.1-dbus-close.patch
Alessandro Alocci
check if you have installed openexr and what version?
If you have it, you should have also
$openexr_prefix/include/OpenEXR/ImfStandardAttributes.h
(included by kfile_exr.cpp)
containing a line like this:
IMF_STD_ATTRIBUTE_DEF (utcOffset, utcOffset, float)
HTH, Alessandro Alocci
--
http
On Wednesday 02 May 2007 04:48:08 Fix wrote:
Hello!
Can anyone hint me what I need to do in order to get KDE reaction on:
1) Removable device insertion (autofs?...)
Hi, about automount you need dbus-qt bindings compatible
with the dbus-qt libs/API used in kde-3.5.6.
Find a package
;@' sc/source/ui/inc/csvcontrol.hxx
As I said they worked for OO-2.1.0, however if you obtain the same error
from different files you can just substitute manually the NULL occurence in
the line reported by the error with 0.
HTH, Alessandro Alocci
--
http://linuxfromscratch.org/mailman/listinfo/blfs
but I could
not locate this.
It's just because the latest source available on OO site are 2.2.0 now.
Alessandro Alocci.
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
-2.1.0).
Alessandro Alocci.
That would be nice. I actually believe you that it works, but I guess
I need some confirmation before I go mucking around with a package
that I've never touched before.
I also want to see if it works with OO-2.0.3 too.
However, the build is started, I'll report
On Friday 18 May 2007 21:14:29 Alessandro Alocci wrote:
However, the build is started, I'll report something
tomorrow morning.
Hi, the fix about the NULL assignement seems to work,
however building OO-2.0.3 I had two other different problems.
The first was due to my too recent version of neon
On Tuesday 26 June 2007 18:28:08 Lauri Kasanen wrote:
It seems there are three good video editors for Linux: Kino, Lives and
Avidemux. I tried building Avidemux 2.4pre1 and when it didn't work, 2.3.
Because it had the least dependencies from those three (KDE for kino and
explicitly in configure the location of netpbm
libs and includes).
But I see no problems configuring gocr:
./configure --prefix=/usr --with-netpbm=/opt/netpbm
(...)
option: with_netpbm /opt/netpbm
checking for library containing pnm_readpnminit... -lnetpbm
(...)
HTH, Alessandro Alocci
--
http
Il Thursday 09 August 2007 17:01:45 Dan Nicholson ha scritto:
That looks like the library is called libnetpbm, but libgocr is tryng
to link to libpnm (-lpnm). I bet if you `ln -sv libnetpbm.so
libpnm.so', it would work. The linker is failing to find the library
in the config.log output
On Wednesday 29 August 2007 12:54:47 alberto hernando wrote:
Hi.
Long time ago, I tried to compile digikam-0.9.2. It failed, so I sticked
with 0.9.0, but I want to try again.
The problem is in jasper. Digikam believes that it isn't installed, but it
is. I've tried both 1.700 and 1.900 with
On 09 November 2007 02:42:34 Nicolas FRANCOIS wrote:
Hi.
I want to build OO (Open Office) with the last BLFS. I had to download OO
2.3, because 2.2 is not available anymore. But I don't think it's an
issue here.
In the build process, I get this error message :
checking if uudecode can
On Saturday 10 November 2007 14:20:22 Nicolas FRANCOIS wrote:
/sources/OOG680_m5/canvas/source/cairo/cairo_cairo.cxx:202: error:
'PictStandardA8' was not declared in this scope
/sources/OOG680_m5/canvas/source/cairo/cairo_cairo.cxx:205: error:
'PictStandardRGB24' was not declared in this
62 matches
Mail list logo
