C has the long ladder.
>
> We're set.
>
> 73
> Mark
> K5MGJ
>
>
> From: Michael Monsour <msi...@gmail.com>
> To: mark janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB
> <bvarc@bvarc.org>
> Sent: Thursday, May 18, 2017 2:47 PM
> S
: Thursday, May 18, 2017 2:47 PM
Subject: Re: [BVARC] MSWE - need preformed guy dead end grips
I found four stainless steel cable clamps. [U bolts with saddle]
If there is a picture, then I can locate stainless hardware which I think is
also used to secure pretty wire rope fencing
Mike Monso
-
> *From:* Michael Monsour via BVARC <bvarc@bvarc.org>
> *To:* mark janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB <
> bvarc@bvarc.org>
> *Cc:* Michael Monsour <msi...@gmail.com>
> *Sent:* Thursday, May 18, 2017 12:49 PM
>
> *Subject:* Re: [
janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB
<bvarc@bvarc.org>
Cc: Michael Monsour <msi...@gmail.com>
Sent: Thursday, May 18, 2017 12:49 PM
Subject: Re: [BVARC] MSWE - need preformed guy dead end grips
On the ends of the horizontal antenna m
alvanized steel. | |
|
|
From: mark janzer via BVARC <bvarc@bvarc.org>
To: BRAZOS VALLEY AMATEUR RADIO CLUB <bvarc@bvarc.org>
Cc: mark janzer <k5...@yahoo.com>
Sent: Thursday, May 18, 2017 12:40 PM
Subject: Re: [BVARC] MSWE - need preformed guy dead end grips
No, the g
>
To: "bvarc@bvarc org" <bvarc@bvarc.org>; mark janzer <k5...@yahoo.com>
Cc: Scott Medbury <smedb...@windstream.net>
Sent: Thursday, May 18, 2017 12:26 PM
Subject: Re: [BVARC] MSWE - need preformed guy dead end grips
I have some heavyweight galvanized guy
I have some heavyweight galvanized guy clamps that may fit the bill.
Will send more information later.
Scott KD5FBA
Sent from my Verizon 4G LTE Droid
On May 18, 2017 11:59 AM, mark janzer via BVARC wrote:
>
> I'm looking for a couple 3/16" (red label) preformed galvanized
I'm looking for a couple 3/16" (red label) preformed galvanized steel guy
grips.
It appears Greybar may have them, but there must be some other local sources.
Maybe someone (on the list) has these gathering dust from their last tower
guying project.
These will be used for replacing the USS