s my emails are rejected with the
following error message:
The Symantec Mail Security program
: host acuda.wustl.edu[128.252.248.242] said:
550 <[EMAIL PROTECTED]>: Sender address rejected: Blocked (in reply
to RCPT TO command)
--
Marco Tettamanti, Ph.D.
San Raffaele
nd
I have tried creating a symolic link to the existing /usr/lib64/libpng12.so.0
both in the /lib and /usr/lib directories, but I still get the same error
message.
Permissions and file integrity should all be ok.
Do you have any other suggestions?
Thank you a lot!
Marco
Marco Tett
tput below, I still suspect an issue with your
LD_LIBRARY_PATH. It could also be that there are too many shared library
differences between our Linux build platform and your runtime platform.
But let's clarify before reaching that conclusion.
On 08/30/2006 07:06 AM, Marco Tettamanti wrote:
s:
export LD_LIBRARY_PATH=/usr/lib64:/usr/lib:/usr/X11R6/lib64/lib
Add any other library directories to the path above (delimited by :)
that you think might help.
On 08/30/2006 08:14 AM, Marco Tettamanti wrote:
> Hi Donna!
> Upon a fresh login, the output of 'echo $LD_LIBRARY_PATH' is
b/tls/libnvidia-tls.so.1
>> (0xf776a000)
>> libXext.so.6 => not found
>> libX11.so.6 => not found
>>
>> I have tried creating a symolic link to the existing /usr/lib64/
>> libpng12.so.0 both in the /lib and /usr/lib directories, but I
&
install the missing
32-bit libraries with the following commands:
yum install libpng.i386
yum install xorg-x11-libs.i386
yum install xorg-x11-Mesa-libGLU.i386
Now everything's running properly. All the best!
Marco
Marco Tettamanti wrote:
*/Volkmar Glauche <[EMAIL PROTECTED]>/* wrote
of my machine:
Linux bll4 2.6.11-kanotix-11 #1 Sun May 29 22:32:10 CEST 2005 i686 GNU/Linux
Any help would be greatly appreciated!
Best,
Marco
--
Marco Tettamanti, Ph.D.
San Raffaele Scientific Institute
Facoltà di Psicologia
Via Olgettina 58
I-20132 Milano, Italy
Tel. ++39-02-26434888
Fax ++
rchive.com/caret-users@brainvis.wustl.edu/msg00892.html
--
John Harwell
[EMAIL PROTECTED]
314-362-3467
Department of Anatomy and Neurobiology
Washington University School of Medicine
660 S. Euclid Ave.Box 8108
St. Louis, MO 63110 USA
On Nov 29, 2006, at 10:42 AM, marco tettamanti
other file format, then upload the file here, and I'll provide you the
converted version:
http://pulvinar.wustl.edu/cgi-bin/upload.cgi
On 11/30/2006 04:08 AM, marco tettamanti wrote:
Hi John and Donna,
I tried both of your methods, but unfortunately none solved my problem...
I have tried
so, does it occur if you convert the file to NIfTI and/or AFNI?
I'm guessing it will (e.g., suggesting a display issue, rather than a
file I/O issue), but it helps to be sure. If you have trouble
converting to another file format, then upload the file here, and
I'll provide you the converted
d core, enter the command "gdb
./caret5 core". At the gdb prompt, enter the command "where" and send
me the output.
Good Luck.
--
John Harwell
[EMAIL PROTECTED]
314-362-3467
Department of Anatomy and Neurobiology
Washington Universi
the gdb prompt and send me the output.
Are your able to load a surface into Caret5?
Have you tried updating your graphics card drivers?
John
On Dec 5, 2006, at 10:24 AM, marco tettamanti wrote:
Hi John,
I have downloaded caret5_exe_linux_debug and ran it, but strange things
happened... :-|
1)
0
xAChigh: 78
xMedLimit_low: 78
xMedLimit_high: 83
WMThresh = 68.0
Threshold 68.00
ThresholdVolume 68
Thresholded 511162 voxels 23.96...
-----
Any idea of what's causing the problems?
Any help is greatly appreciated!
Sincerely,
>
> I don't mind admitting that this has happened to me more than once. ;-)
>
> The reason your bash session fails is that SureFit requires some
> environment variables (e.g., SFHOME, and a number of others in that old
> release, including LD_LIBRARY_PATH). While your .cshrc file
> Use 'ls -l' to make sure it is really gone. If it won't remove, we
> could have a permissions problem (i.e., SureFit can't overwrite an
> existing file of the same name).
>
> Please let me know what you find trying these commands.
>
> Donna
--
Marco
r.wustl.edu/cgi-bin/upload.cgi
>
> I'll give Analyze2Minc a shot and hope for more ideas.
>
> Donna
--
Marco Tettamanti
Scientific Institute San Raffaele
c/o L.I.T.A. - room 24/5
Via Fratelli Cervi 93
I-20090 Segrate (MI)
Italy
Tel. +39-02-21717548
Fax +39-02-21717558
email: [EMAIL PROTECTED]
>
> One other test might give us a bit more insight: When you load your
> intensity volume in SureFit, are you able to save your settings under
> the SureFit: Volume Preparation tab (i.e., write your .params file)?
> I'm curious as to whether python can write *any* files -- .m
ScientificPython). I'll look futher
> for similar problems with this module.
>
> Also, I will contact you off-list about debugging alternatives.
>
> Donna
--
Marco Tettamanti
Scientific Institute San Raffaele
c/o L.I.T.A. - room 24/5
Via Fratelli Cervi 93
I-20090 Segrate (MI)
Italy
Tel. +39-02-21717548
Fax +39-02-21717558
email: [EMAIL PROTECTED]
success there, and it would support the
> vfat-as-culprit hypothesis.
--
Marco Tettamanti
Scientific Institute San Raffaele
c/o L.I.T.A. - room 24/5
Via Fratelli Cervi 93
I-20090 Segrate (MI)
Italy
Tel. +39-02-21717548
Fax +39-02-21717558
email: [EMAIL PROTECTED]
ometimes hard to reconstruct to which process an
> error message was associated.
>
> Thanks a lot,
> Marco
--
Marco Tettamanti
Scientific Institute San Raffaele
c/o L.I.T.A. - room 24/5
Via Fratelli Cervi 93
I-20090 Segrate (MI)
Italy
Tel. +39-02-21717548
Fax +39-02-21717558
email: [EMAIL PROTECTED]
inc another try on the vfat file system.
>
> Assuming you also will be using Caret and/or its fMRI mapper, your vfat
> file system might also complain about functions using the netcdf
> libraries, because they almost certainly were built with HAVE_FTRUNCATE
> defined. But Caret u
the library without
HAVE_FTRUNCATE defined. I' ll let you know.
Thanks again,
Marco
--
Marco Tettamanti
Scientific Institute San Raffaele
c/o L.I.T.A. - room 24/5
Via Fratelli Cervi 93
I-20090 Segrate (MI)
Italy
Tel. +39-02-21717548
Fax +39-02-21717558
email: [EMAIL PROTECTED]
crossovers.
---
May this be a similar problem related to the vfat filesystem?
Thanks a lot for your help,
Marco
--
Marco Tettamanti
Scientific Institute San Raffaele
c/o L.I.T.A. - room 24/5
Via Fratelli Cervi 93
I-20090 Segrate (MI)
Italy
Tel. +39-02-21717548
Fax +39-02-21717558
ema
you
> until late next week. Tomorrow is a U.S. holiday, and I'll be at
> Dartmouth's fMRI workshop Monday-Wednesday of next week.
>
> Meanwhile, you'll need to run SureFit on a non-vfat/fat32 file system.
>
> Donna
--
Marco Tettamanti
Scientific Institute San Raffaele
c
em, so I don't know what will happen. But if they fail
> badly, you can do "cd $SFHOME/lib/BAK ; mv * .." to get back to the old
> ones, which work on non-vfat file systems.
>
> Donna
Marco Tettamanti
Scientific Institute San Raffaele
c/o L.I.T.A. - room 24/5
Via Fratelli Cervi 93
I-20090 Segrate (MI)
Italy
Tel. +39-02-21717548
Fax +39-02-21717558
email: [EMAIL PROTECTED]
t; Hello Marco,
>
> On Thursday, July 3, 2003, at 04:06 PM, <[EMAIL PROTECTED]>
> wrote:
> > Dear John,
> > thank you very much for your reply. I am still a bit uncertain,
> though:> does "foci inside the surface" for you mean that these
> foci are
&g
Map a Talairach Focus, the focus
is correctly mapped, but the color scales are unavailable (the foci are
consequently all shown in black. After clicking on 'Apply' in the 'Map
Talairach Focus' window, an error message appears, saying:
PROGRAM ERROR: Unable to create GLX visua
rence may be due to an
asymmetry between the right and the left hemisphere.
But I do not see such a big asymmetry, and I just wanted to be sure that there
is not something wrong with the way I am using the mapping procedure.
Thanks for your help as always!
Marco
--
Marco Tettamanti
Scien
Thanks a lot, Donna!
> * Load the appropriate .params file for the right hemisphere (i.e., the
> one that is named closest to your surface name, or rather the intensity
> volume from which it was generated); its filename should appear in your
> spec file, but the mapper does not load it automatica
is working on a different linux distribution
(Red Hat I believe) and is experiencing the same problems (I can gether more
precise infos if you like).
Any hints on what is happening?
Thank you a lot for your help.
Best wishes,
Marco
--
Marco Tettamanti, Ph.D.
Department of Neuroscience
Other potential problems that can cause such problems:
>
> * AC not set correctly
> * Bad peaks
>
> The best way for me to help is to look at your volume.
>
> Donna
--
Marco Tettamanti, Ph.D.
Department of Neuroscience
Scientific Institute San Raffaele
c/o L.I.T.A. - room 25/5
Via
t; Alternatively, you can write your original full brain volume in unsigned
> byte form and input it to Caret. There should be no need to rescale if
> the input is byte.
>
> I think this probably is the problem (relatively easy fix).
>
> Donna
>
> On 06/09/2005 02:14 PM
Thank you for your advice!
Marco
--
Marco Tettamanti, Ph.D.
Department of Neuroscience
Scientific Institute San Raffaele
c/o L.I.T.A. - room 25/5
Via Fratelli Cervi 93
I-20090 Segrate (MI)
Italy
Tel. +39-02-21717552
Fax +39-02-21717558
email: [EMAIL PROTECTED]
edu/cgi-bin/upload.cgi
>
> You were running Debian Linux, right?
>
> Donna
>
> On 06/10/2005 12:16 PM, marco tettamanti wrote:
> >Dear authors,
> >I am having problems with the "Map Volumes to Surface" utility. I am
> > following the very same procedur
34 matches
Mail list logo