ld be
plug and play. Not like you'll likely get many more $ on resale and
assuming a good rebuilt you should be good for years. You can buy a lot of
expensive Yanmar impellers for the dollars saved. Actually it'll be the same
impeller you already have in your spare box.
Kim Brown
Flag etiquette is clear in our club- Flag officers receive a flag with
either one (rear) two (vice) or three (commodore) 'bare feet'. Same graphic
that is on the club burgee. http://www.cmcs-sail.org
Toes up if you are the current flag officer; toes down if you are a past
officer.
Check your homeowners ins - often you can get small boat liability coverage
there if under 26'. Towing Ins is separate and different than liability.
BoatUS offers both
Kim Brown
TrustMe!!! 35-3
Message: 13
Date: Mon, 18 May 2015 11:55:59 -0400
From: Andrew Frame
To: CnC-List@cnc-list.c
got lucky once by just removing the hose from the front of the heat
exchanger. Vane was within grasp of needle nose pliers as chunk was actually
too big to get sucked into actual cooling tubes.
YMMV
Kim Brown
TrustMe!!! 35-3
___
Email address:
CnC-
Jake,
add me to the list of folks interested in 35-3 polars in any format- hard
copy is fine.
Kim Brown
TrustMe!!! 35-3
2015-05-07 8:25 PM, Jake Brodersen via CnC-List wrote:
>
> I have the hard copy from US sailing, but not sure how to translate it
> into the appropria
Also check the mixing elbow-crap will block flow out of back side of heat
exchanger...
Kim Brown
TrustMe!!! 35-3
Message: 14
Date: Tue, 05 May 2015 07:49:11 -0400
From: Robert Boyer
To: Tom Buscaglia , "cnc-list@cnc-list.com"
Subject: Re: Stus-List Overheating as hig
Sunny and mid-80's here. Only ice in gin and tonics. Scrubbed the bottom
last weekend (year2, Slime only, Trinidad SR). Just threw a can of diesel
in. Will be sailing along the beach this weekend. Wind SSE at 12.
Kim Brown
TrustMe!!!
t me down 5' to the
bottom of the keel. I would not recommend it for more than light/emergency
use. Google 'hookah gold dredge' for a look at other uses besides boat
cleaning..
Kim Brown
TrustMe!!! 35-3
-Original Message-
From: Jake Brodersen [mailto:captain_j...@cox.net
umulator but it does allow me to
make it around the boat without drowning. My thought is that it stows nicely
and gives me a way to deal with line wraps or clogged intakes etc. away from
home. YMMV
Kim Brown
Trust Me 35-3
On Dec 22, 2014, at 6:25 PM, Burt Stratton via CnC-List
mailto:cnc-list@c
. Guess Ill
get the new sail and skip the drive from Nice to St. Tropez for the moment
.
Kim Brown
Trust Me!!! 35-3
_
From: Antoine Rose [mailto:antoine.r...@videotron.ca]
Sent: 10/18/2014 12:27 PM
To: Kim Brown; cnc-list@cnc-list.com
Subject: Re: Stus-List Tank fill Key
Anyone,
All my tank fills (Diesel, Waters, Waste) require a winch handle to open
close. Had a small plastic Barient key that was very handy to use. It is
MIA. Any source for a replacement? Winch handles work fine but the little
plastic key fits in the pocket better
Kim Brown
Trust Me !!! 35
challenged so once at the top they are only good for pretty pictures.
Kim Brown
Trust Me!!! 35-3
___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bo
David,
I have an '87 35-3 CB and am on the gulf coast of FL. Spent 3 weeks in
Abacos last summer without draft issues. Great boat. That said the real
issue on a 30 year old boat is how it has been maintained for 30 years. I
got lucky.
Kim Brown
TrustMe!!!
s a
rudder position indicator in the mix. Looking for a 'Mine did that and it
was the ________"
Thanks
Kim Brown
TrustMe!!! 35-3
___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your lis
There is a
rudder position indicator in the mix. Looking for a 'Mine did that and it
was the "
Thanks
Kim Brown
TrustMe!!! 35-3
___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
This just went down in our cruising area.
https://news.yahoo.com/blogs/trending-now/grouper-eats-shark-in-one-bite-in-
viral-video-193741957.html
Guess shark week will be replaced next year.
Kim Brown
TrustMe!!! 35-3
___
This List is provided by the C
his boat was sailing.
Kim Brown
TrustMe!!! 35-3
___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mai
ket; motor; remote controls (you really don't want to be adjusting
throttle and shifting by reaching over the transom); and removing the old
running gear and plugging the shaft hole. Good luck I know how frustrating
a flaky motor can be. In my case I solved it by buying a bigger boat with a
diese
atched the
hole pattern of the helm seat to finish off the sides of the propane lockers
where the helm seat went.
Kim Brown
Trust Me!!! 35-3
___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change yo
Steve,
FWIW I am constantly amazed how much water comes down inside the mast. My
mast boot is fine. On my boat there is plastic tubing that drains the mast
step into a container (bottom of cut off plastic jug - like the large gal
container for 2 cycle oil) that fits nicely between the stringers a
kick it in gear
w/o slowing more or else one blade deployment would be an issue (easy to do
but hard to remember to do). After rebuild it is MUCH better and is now a
very rare event. Besides the pin redo they rebuild the stops. Not sure what
solves the issue but it is solved.
Kim Brown
TrustMe!!!
g one would give
you access and with the stove normally there it poses no 'aesthetic' issues.
Never have had it off so who knows what lurks behind ;-) I have the little
brass pump up under the sink that sucks the reefer drain and spits it into
the sink.
Kim Brown
TrustMe!!! 35-3
And won't
our tax dollars be used when the big one hits? Actually the blogger probably
accomplished her goal- It is not to further discourse but to drive traffic
to her blog. And that is the sad lesson to be learned here.
Kim Brown
Trust Me!!! 35-3
now I will need AC on the hook.
Otherwise it is bulky (though less so than other generators) and in the way
and adds an xtra gas can (dinghy 2 stroke/ Generator 4 stroke) Usually it is
on standby hurricane duty. Got it after Charley- Not ever doing storm
clean-up with only warm beer again....
with the semi flexible solar panels that you can attach (Velcro) to your
bimini top? Not looking to trickle charge to top off- I am at a dock at the
house and can plug in when home as needed. I need to keep the beer cold at
anchor on day 2-3.
Kim Brown
Trust Me!!!
sider
50's to be winter here. (sunny and headed to 80 today) Don't know about
others but the thermostats we started with never lasted more than a year or
2- just not marine ready. So I finally just bought a Honeywell hockey puck
and as it is all mechanical it has been just fine.
Kim
ll get an email confirmation
with paypal instructions so you don't even have to figure out the postage or
find a Canadian headed home (not 'til Easter if they know what's good for
them).
Kim Brown
TrustMe!!! 35-3
Message: 1
Date: Tue, 21 Jan 2014 17:32:13 -0800
From: "David
Ditto for Garhauer. I installed set-up on existing track and haven't looked
back. Love being able to adjust from the helm. Great addition at a great
price. Changing out the track would be a PITA.
Kim Brown
TrustMe!!! 35-3
___
This List is pro
we're headed to the
mid-40's F. But that is ok- got to work this week and it should warm up by
next weekend.
Kim Brown
TrustMe!!! 35-3
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
s slop and
lasted for years..
Kim Brown
Trust ME!!! 35-3
Danny,
Check the rudder tube carefully. I am pretty sure that I can see plastic
inserts at the top and bottom of the rudder tube in your photos. On my
Viking 28 these plastic inserts were worn and the rudder was sloppy. The
inserts s
Bill
This should get you headed in the right direction.
http://marinedieselparts.com/store/yanmar_3gm30_32_cooling_sea_water_pump.ht
m
Though of course Yanmar likes to change parts numbers every now and then
Kim Brown
Trust Me!!! 35-3
___
This List
r pump can 'run dry').
Kim Brown
TrustMe!!! 35-3
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
ay for the Admiral- box wines
Vodka- we don't drink it but there is an importer that is often a sponsor of
a local regatta so we often end up with a free bottle- actually the pepper
vodka makes great bloody mary's.
Kim Brown
Trust Me 35-3
___
T
Thanks Stu
I appreciate what a PIA maintaining a site (and more) can be/has been.
Florida is not a bad place to sail in Feb-Mar.
The boat is unlocked and you are welcome.
Kim Brown
TrustMe!!! 35-3
Ft. Myers
___
This List is provided by the C&a
port, loop up in the stern
and discharge it to starboard and vice versa that way if you actually are
doing something like sailing one side or the other will be high.
Kim Brown
Trust ME!!! 35-3
Original message
From: Steven Winks
Date: 08/12/2013 9:15 PM (GMT-05:00)
To: c
pump
under the forward part of the dinette. If it is useful I have the Kracor
tank numbers somewhere. They appear factory installed so no info on
retrofitting.
Kim Brown
Trust Me!!!
35-3
Message: 4
Date: Mon, 5 Aug 2013 21:11:33 -0400
From: "Richard H. Bernstein"
To: cnc-list@cn
.
(though surely not OSHA approved)
Kim Brown
Trust Me!!! 35-3
Message: 4
Date: Sat, 3 Aug 2013 10:13:36 -0400
From: kelly petew
To: cnc-list
Subject: Stus-List Using a hammer drill to remove corroded fastener
Message-ID:
Content-Type: text/plain; charset="iso-8859-1"
I want t
http://www.pompanette.com/pomp.nsf/0/2648B1279F709117852578170048142D?Open
This falls in the guess category as I don't know the 36
Kim Brown
Trust Me!!!
35-3
From: TOM VINCENT
To: C&C Forum
Subject: Stus-List Opening port manufacturer
Message-ID:
Content-Type: text/plain; charset=&q
Richard
The ICOM charger for that is the AD-95 though I have seen some universal
chargers too. Agree you should try e-bay.
You can hardwire it into boat 12v or it comes with a 200mA 12v transformer
(bc-122a)
Kim Brown
Trust Me!!!
35-3
To: "cnc-list@cnc-list.com"
Subject: Stus-List
Joel
took a 2x4 and extended it from deck top at mast base toward dock; using
level to insure 2x4 level with deck and measured between water and bottom of
2x4 = 56"
went up the mast (love atn climbers) extended dummy end of 100' reel tape to
spouse at mast base below= 44' 3"
Measured from Mast
y who tips boats $200 (each way). So has anyone else with a 35-3 come
up short? (Can't wait to see the response to that set-up) Or do I need to
check my math again (did it 3x). I could see an inch or two variance but
this is more than a foot?
Thanks
Kim Brown
now know it is barely more than 1 boat buck (US or CDN). And it was well
worth it - purrs like a new engine.
Kim Brown
Trust Me!!!
35-3
_
From: "Don Jonsson"
To:
Subject: Stus-List Overheating due
.
I had replaced the elbow about a year ago and the knuckle was fine then so
it built up relatively quickly. And I haven't sucked an impeller lately (on
my FWC the vanes hang up at the front end of the heat exchanger and are a
PITA to extract).
Kim Brown
Trust Me
ater depth. So be sure
it'll work for you at low tide lest you find yourself clunking the cross
member in your comings and goings. It is not like you can 'heel the boat'
to get away from the dock if the tide is challenging and you are on a
lift...
Kim Brown
Trust Me!!! 35-
eeded to run
an air blower to pump the dinghy up on the bow. It is tight and a PIA to
work on but once everything is settled in it works nicely. Looked at 6V
golf carts but the height looked to be a problem. Battery charger is in the
Port lazerette tucked behind the waterheater and trash can.
Kim
Steve
Number I show for my 3GM30F for the alternator belt is 25132-003700
Yanmar seems to change their numbering system every now and then just to
confuse. I have bought and used that number.
Kim Brown
TrustMe!!! 35-3
On Apr 22, 2013, at 12:08 PM, OldSteveH wrote:
> Hello all, I went t
ice
thaw
Kim Brown
TrustMe!!! 35-3
_
To: cnc-list@cnc-list.com
Subject: Stus-List keeping anchor rode dry
Message-ID: <5309182787683771127@unknownmsgid>
Content-Type: text/plain; charset=ISO-8859-1
I pulled my
spect. Not enough time to do major work but enough for maintenance. Then
splash in the AM.
Kim Brown
Trust Me!!! 35-3
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
perly you shouldn't be able to. This
has held for several years now without incident- all for less than $20.
Obviously this only works if the cracks are right at the fitting and are
covered by the flange on the fitting and nut.
Regards
Kim Brown
Trust Me!!! 35-3
_
70's) up to my elbows in Dow 795.. What a mess.
Kim Brown
Trust Me!!! 35-3
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
drill them out? Guess I could leave well enough alone but that is just
asking for failure at an inopportune time
Kim Brown
Trust Me!!! 35-3
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
the hardware
front-some sort of pin/bolt that will fit between the straps (approx 1.5")
and the then expand (spring? threaded?)to pop into the strap holes on either
side. Of course it needs to be stainless, handle real weight and stay
expanded.Thoughts? Voice of experience? Anyone tried #3?
ll? I need good
enough - not perfect. I want to get going as they are playing baseball here
so the weather is bound to get out of the 60/70s and be warm enough to sail
soon.
Kim Brown
Trust Me!!! 35-3
___
This List is provided by the C&C Ph
. Whatever you
pick some will whine- it is in their nature and they like to do it.
Kim Brown
TrustMe!!! 35-3
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
h and
available in almost any color. You may also be able to source scraps from
your local cabinet shop- The cabinet shop I worked with always had a big
scrap selection useful for small projects but not for the countertops they
built. May be easier than sourcing a 4x8 sheet of something.
Kim Brown
uing and likelihood of success.
BTW down here the long lines at the gas station always happen before the
storm..
Kim Brown
Trust Me!!! 35-3
On Nov 2, 2012, at 10:15 PM, Chuck S wrote:
During Hurricane Sandy, in Atla
d large rubber washer of some sort. The fitting has a hose
barb on the end for the waste - insert (careful not to stress the tank and
fitting too much) and you are back in biz.
Kim Brown
Trust Me!!! 35-3
BTW it has been blowing like stink (25-35) the last couple days here due to
Sandy and it didn&#
C.
(I use it on the foredeck to attach to a blower to fill the inflatable as I
don't like to tow it if I can avoid it. So you can certainly pick up some
amp hrs by moving to grp 31s for your house bank (don't think 3x grp31's
will fit
she even sort of likes the view but her skill set
is limited once she is at the top.
Kim Brown
Trust ME!!! 35-3
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
winding in -
better that lots are inconvenienced than some get creamed. Pay attention to
the backside and let it get well on its way before you start unwinding.
Be safe!
Kim Brown
TrustMe!!! 35-3
___
This List is provided by the C&C Ph
s,
checked for water in the filter bowl etc. - do the cheap, obvious, and easy
first. If it is still acting up then this goes on the list of relatively
common possibilities.
Kim Brown
TrustMe!!! 35-3
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
Jackson
FWIW
1) I would start with the prop and bottom - be sure it is clean. it is
amazing how a few barnacles on the prop can kill speed (and RPMs) and
unbalance things. (what kind of prop?- if folding-one blade not opening
right due to crud would really throw stuff out) BTW can you get it to
62 matches
Mail list logo
