Re: Stus-List 1996 C's

ttp://used-boats-forsale.blogspot.com/2012/10/52-c-c-custom-wiggers-52-3-cabin-1997.html Ken H. On Tue, 1 Jan 2019 at 15:27, Rod Stright via CnC-List mailto:cnc-list@cnc-list.com> > wrote: I was there about a year after the fire and they were trying to sell a 37 kevlar hull that was

Re: Stus-List 1996 C's

I was there about a year after the fire and they were trying to sell a 37 kevlar hull that was fine. There was also a 51’ hull that was fine as well. As I recall they wound up chopping up the 37’ hull. The hulls that were out of the mould were recessed into cavities in the floor so they

Stus-List Teak treads refinishing

Has anyone refinished the teak stair treads going down to the main cabin from the companionway, if so what did you use and how well did it stand up to all the traffic. Thanks Rod --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

Stus-List #2 Dacron Headsail

Looking for a #2 headsail for a boat with an I of 46' and a J of 13' in good to very good condition. Headsails from a C 33 Mk 2 and similar sized boats should fit. Respond to strig...@eastlink.ca Thanks Rod --- This email has been checked for viruses

Stus-List Dacron mainsail for sale

One Doyle dacron mainsail in good condition. One full and three partial battens, loose foot, slugs, one set of reef points Luff 39' foot 12'6". Not used much at all. If interested reply to strig...@eastlink.ca Rod --- This email has been checked for

Re: Stus-List Depth sounder replacement

Will likely be on sale when the Boat Show starts in Toronto Jan 18 Sent from my iPhone > On Dec 18, 2018, at 5:10 PM, Dr. Mark Bodnar via CnC-List > wrote: > > > I'd appreciate some advice regarding a non-functioning depth sounder. > > Near the end of the season my depth sounder started

Re: Stus-List Cleaning the engine.

TSP? Sent from my iPhone > On Dec 2, 2018, at 8:23 AM, dwight veinot via CnC-List > wrote: > > Chemical name?? Is it trisodium phosphate, which i think is the best water > based degreaser going. > >> On Sun, Dec 2, 2018 at 8:23 AM coltrek--- via CnC-List >> wrote: >> I use oil eater for

Re: Stus-List Sticker residue

I have used it for st least 10 years on AwlGrip with no negative effects. Don’t rub too hard and rinse with fresh water as soon as the residue is gone Rod Sent from my iPhone > On Nov 30, 2018, at 10:47 AM, Charlie Nelson via CnC-List > wrote: > > Thanks to all who sent suggestions on this

Re: Stus-List Glue residue

Acetone usually works well Sent from my iPhone > On Nov 29, 2018, at 8:49 AM, Chuck Gilchrest via CnC-List > wrote: > > Spray can electrical contact cleaner or brake cleaner are both high flash > point solvents that will remove the goop. Not sure how aggressive they’ll be > on an Awlgrip

Stus-List Refrigeration units

Considering installing a refrigeration unit in the ice box on my C 99. Do mostly racing and some occasional cruising. Regards Rod Stright C 99 Sent from my iPhone >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you

Stus-List Wanted Dacron Roller Furling Genoa

Looking for a Roller Furling Dacron Genoa in good condition for a sailboat with and I of 45-46' and a J of around 13'. C 33 Mk 2 or similar size C would likely work. Reply to strig...@eastlink.ca No need to bother others with a reply all response.

Re: Stus-List Garhauer traveler

He is excellent and his gear is even better, high quality guaranteed for 10 years Sent from my iPhone > On Oct 13, 2018, at 1:48 PM, Doug Mountjoy via CnC-List > wrote: > > Derrick, > Call Guido at Garhauer. He will help you with finding the best traveler. I > just had him help me with

Stus-List Dacron RF Grnoa

Looking for a dacron 135% RF dacron genoa in good condition that would fit a C 33 Mk 2 or a C 99. I 46' J 13'. Respond to strig...@eastlink.ca so we don't burden anyone else with unnecessary emails. Thanks Rod --- This email has been checked for viruses

Re: Stus-List 1978 C 26

Frers 30 Might also be a good option. I owned. Frers 33 for 9 years great boat. 30 quite similar Rod Sent from my iPhone > On Sep 26, 2018, at 1:02 PM, Shawn Wright via CnC-List > wrote: > > Hi Jeremy, > > Thanks for the info. I see that you're not far from me, so maybe we'll see > you

Stus-List FW: Racing and Cruising sails for sale

Revised list A variety of racing and cruising sails that will fit C 33 - 35' sailboats 1. Doyle cruising laminate blade in good condition Luff 43'11", Foot 13' 8", Leech 40' 5" $500 usd 2. Doyle dacron mainsail in good conditions with slugs Luff 39.5' Foot 12'10" $800 usd 3.

Re: Stus-List Racing and Cruising sails for sale

> Don Kern > Fireball 12708 > C 35MK2 > >> On 8/26/2018 9:42 AM, Rod Stright via CnC-List wrote: >> A variety of racing and cruising sails that will fit C 33 – 35’ sailboats >> >> 1. Doyle cruising laminate blade in good condition Luff 43’11”, Foot

Stus-List Racing and Cruising sails for sale

A variety of racing and cruising sails that will fit C 33 - 35' sailboats 1. Doyle cruising laminate blade in good condition Luff 43'11", Foot 13' 8", Leech 40' 5" $500 usd 2. Doyle dacron mainsail in good conditions with slugs Luff 39.5' Foot 12'10" $800 usd 3. Doyle racing blade

Stus-List C flags

Anyone know where I can gets some C flags 20” x 20” or bigger, quickly? Rod Stright Halifax Nova Scotia --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ___ Thanks everyone for supporting

Re: Stus-List CnC-List Digest, Vol 150, Issue 37

Not sure how this go here please ignore From: Rod Stright Sent: July-10-18 8:31 AM To: 'cnc-list@cnc-list.com' Cc: 'Tom Buscaglia' Subject: RE: Stus-List CnC-List Digest, Vol 150, Issue 37 Shipping around $35 USD, delivery time 5 -7 days. Rod From: CnC-List

Re: Stus-List CnC-List Digest, Vol 150, Issue 37

Shipping around $35 USD, delivery time 5 -7 days. Rod From: CnC-List On Behalf Of Tom Buscaglia via CnC-List Sent: July-10-18 12:10 AM To: cnc-list@cnc-list.com Cc: Tom Buscaglia Subject: Re: Stus-List CnC-List Digest, Vol 150, Issue 37 Ben at Gartside Marine Engines did an inspection

Re: Stus-List downwind polars

It really depends upon the wind strength and conditions. Sometimes in light air dead downwind doesn’t work very well as the boat sails over itself and stalls, in these situations you may make better speed reaching, it all depends upon your VMG. Rod C 99 2004 From: CnC-List On Behalf

Stus-List Steaming light guard

Has anyone come up with a good design for a guard to protect your steaming light from damage caused by flailing halyards and headsails in strong winds. I know Forespar makes one https://www.forespar.com/products/sail-light-guard.shtml but I am not sure that that design will do the job as it

Stus-List C 35 Mk 3 Spinnaker Like New

Clearing out inventory to make room for new. One C 35 Mk 3 North Spinnaker, 1 oz., very good condition, was asking $1100 reduced to $800 usd. Pictures available to those interested. strig...@eastlink.ca --- This email has been checked for viruses by

Stus-List Used sails for sale

The following sails are listed for sale and their condition is indicated. Some pictures are available : Genoas to fits boats with an I of 44-46’ and a J of 13-14’ (Fits C 33 Mk II, C 99, etc.) 1. Doyle Kevlar #1 155% good condition $800 2. Evolution # 2 140% Kevlar/taffeta very good condition

Re: Stus-List C 33 MK II Bilge pumps

For certain offshore races there is a requirement for two manual bilge pumps, one of which can be operated from inside the main cabin with everything closed up. Is it possible that this could be the reason. I don’t believe the regulations say it has to have a separate overboard discharge. It

Re: Stus-List Cove stripe and symbol

I have a C 99 and just measured mine. 1/2” will work best if I use 5/8” the edges will protrude out of the mounded cove and it will be much more difficult to line up. Since the edges may be out of cove the edges may wear out quickly. Rod Sent from my iPhone > On Apr 8, 2018, at 3:49 PM,

Re: Stus-List [EXTERNAL] Re: Marine Batteries

; > Mike > Persistence > Halifax > > From: CnC-List [cnc-list-boun...@cnc-list.com] on behalf of Rod Stright via > CnC-List [cnc-list@cnc-list.com] > Sent: April 5, 2018 4:28 PM > To: cnc-list@cnc-list.com > Cc: Rod Stright > Subject: Re: Stus

Re: Stus-List [EXTERNAL] Re: Marine Batteries

were pushed hours ago. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Apr 5, 2018, 3:29 PM Rod Stright via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Do we always need to copy everyone on the list about everything. Gets pretty ridicu

Re: Stus-List [EXTERNAL] Re: Marine Batteries

Do we always need to copy everyone on the list about everything. Gets pretty ridiculous with the number of emails. No wonder people unsubscribe Rod From: CnC-List On Behalf Of Della Barba, Joe via CnC-List Sent: April-05-18 3:01 PM To:

Stus-List Used sails in Good to very good condition

The following sails are listed for sale and their condition is indicated. Some pictures are available of some of the sails: Genoas to fits boats with an I of 44-46’ and a J of 13-14’ (Fits C 33 Mk II, C 99, etc.) 1. Doyle Kevlar #1 155% good condition 2. Evolution # 2 140%

Re: Stus-List New Sheets - What kind of line?

Not if it is made properly. Rod From: CnC-List On Behalf Of Hoyt, Mike via CnC-List Sent: March-22-18 3:30 PM To: cnc-list@cnc-list.com Cc: Hoyt, Mike Subject: Re: Stus-List New Sheets - What kind of line? Hi Dennis Your soft

Re: Stus-List New 1974 C MKII 35 Owner

I had one for several years here in Halifax, won our class in Marblehead to Halifax, great boat was called Footloose III and now I believe is called Gale Force, great all round boat. Rod 2004 C 99 From: CnC-List On Behalf Of robert via CnC-List Sent:

Re: Stus-List Sail Drive

Thanks Barry I'm leaning towards the 130 as it was built by Volvo the MS 25 was built by another company. Rod -Original Message- From: CnC-List On Behalf Of Barry Lenoble via CnC-List Sent: March-02-18 2:10 PM To: cnc-list@cnc-list.com Cc: Barry Lenoble

Re: Stus-List Volvo Penta Sail Drive.

bert Subject: Stus-List Volvo Penta Sail Drive. Rod, No thoughts, experience or suggestions but one question.What went wrong with a less than 15 years old engine and transmission? Rob Abbott AZURA C - 84 Halifax, N.S. On 2018-03-01 7:36 PM, Rod Stright via CnC-List wrote: I will need to repl

Stus-List Volvo Penta Sail Drive.

I will need to replace my Volvo Penta Sail drive and transmission on my 2004 C 99. Just wondering if anyone else has done that. As well in replacing it I can go with a 130 unit (newer and recommended by Volvo) over the MS 25 that was on the original installation. Any thoughts and or experience

Stus-List Used A 2 Running Asymmetrical

Looking for a used A 2 running asymmetrical in good condition that will fit a C 99 with an I of 46 and a J of 14.5’ Rod Sent from my iPhone ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly

Re: Stus-List FASTRACK: AN EPIC VOYAGE

I believe I saw a C 99 called FastTrack but I don’t believe it was in Toronto. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: January-14-18 5:32 PM To: cnc-list@cnc-list.com Cc: Bill Coleman Subject: Re: Stus-List

Stus-List Volvo Penta Sail Drive

Looking for a Volvo Penta sail drive lower unit and transmission in good or in rebuildable condition. Unit is a MS25SR 2.47:1. A newer 130SR 2.47:1 would also work as the MS25SR is no longer manufactured . If anyone has such a unit or is aware of an available unit please let me know by responding

Re: Stus-List New lines and hayalards

Full disclosure, I work for Novatec Braids Ltd in marketing and product development... Chuck Gilchrest Half Magic 1983 35 Landfall Padanaram MA Sent from my iPhone On Jan 11, 2018, at 7:26 AM, ROD STRIGHT via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote

Re: Stus-List New lines and hayalards

Check out Cajun Ropes in Yarmouth. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of T power via CnC-List Sent: January 11, 2018 7:30 AM To: cnc-list@cnc-list.com Cc: T power Subject: Stus-List New lines and hayalards Hello everyone, I'm

Re: Stus-List Cold weather [was Re: Wrapping LifeSling with Sunbrella]

The big advantage to a cold climate!!! From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: January-08-18 4:42 PM To: cnc-list@cnc-list.com Cc: Bill Coleman Subject: Re: Stus-List Cold weather [was Re: Wrapping LifeSling with

Re: Stus-List Windows Navigation Software

Any A kites? Rod Sent from my iPhone > On Dec 29, 2017, at 12:12 PM, Doug Allardyce via CnC-List > wrote: > > Neil, > I'm in Detroit and may have some sails available for sale this spring for a > C 35 III. All are no older than two years with little use. Sail loft is

Re: Stus-List Window replacement

So do we have some agreement: 1. Best material for windows Plexiglass of similar product 2. Best application 3M VHB 5952 tape 3. Best sealant Dow Corning 795 or Pecora 895 (same properties) 4. Paint behind windows black or coloring the area behind the window (cavity) that

Re: Stus-List Window replacement

Interesting I just emailed 3M and got the opposite answer Rod Sent from my iPhone > On Dec 14, 2017, at 2:41 PM, Matthew L. Wolford via CnC-List > wrote: > > Incidentally, I noted in a previous e-mail that a 3M rep I talked to (by > calling in) recommended 5952 over

Stus-List Asymmetrical Spinnaker for Sale

One like new Doyle Racing Asymmetrical spinnaker in like new condition will fit boat with an I of 45' and a J of 13'. Used less than 6 times. Will fit C 33 Mk 2 or similar size boats. $1500 firm Canadian. Rod -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]

Re: Stus-List Dow Corning Sealant 795

Thanks Mike Rod From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of mike amirault via CnC-List Sent: December-02-17 5:08 PM To: cnc-list@cnc-list.com Cc: mike amirault Subject: Re: Stus-List Dow Corning Sealant 795 Arrow construction in Burnside

Re: Stus-List Dow Corning Sealant 795

ubject: Re: Stus-List Dow Corning Sealant 795 www.dowcorning.com/applications/DistributorFinder/Default.aspx?prod_id=01595 717_ids=PROD=ON=CAN=E From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rod Stright via CnC-List Sent: Friday, December 1, 2017 7:18 AM To: cnc-li

Stus-List Dow Corning Sealant 795

Anyone know if this product is available in Canada? It is the product many have recommended for sealing cabin windows along with the 3M VHB tape. Regards Rod --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

Re: Stus-List White non skid decks

d that, try Woody Wax. > > > Bill Coleman > C 39 > > > -------- Original message > From: Rod Stright via CnC-List <cnc-list@cnc-list.com> > Date: 11/22/17 15:40 (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: Rod Stright <strig...@eastlink.ca> &g

Re: Stus-List Experience with exp system epoxy

I’ve used epoxy on the bottom and edges to keep moisture but not on the surface. Rod From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Mpcbi via CnC-List Sent: November-22-17 7:56 PM To: cnc-list@cnc-list.com Cc: Mpcbi Subject: Re: Stus-List Experience with

Stus-List White non skid decks

Just pressure washed the deck on my new to me C 99. Man they look great but as soon as you step on the non skid it looks dirty and is difficult to clean. Anybody got any tips for keeping the white non skid decks clean and/or easier to clean? Rod 2004 C 99 --- This email has been checked

Stus-List Volvo Penta Sail Drive

Anyone out there have any experience at replacing a Volvo Penta Sail Drive and transmission? Recommendation on a good source for parts and expertise hopefully on the east coast.? Thanks Rod 2004 C 99 --- This email has been checked for viruses by Avast antivirus software.

Re: Stus-List Removing companionway slider plexiglass, C 37/40+

> C 44 > Portland Or > > Sent from my iPhone > >> On Nov 19, 2017, at 2:52 AM, Rod Stright via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> Hi Gary, >> >> Is there a name for the color of plexiglass you used? I assume it is not &g

Re: Stus-List Removing companionway slider plexiglass, C 37/40+

Hi Gary, Is there a name for the color of plexiglass you used? I assume it is not the bronze color you used? I am in the process of getting new windows for my C 99 and also like the darker color. If yu could send or post the pictures that would be appreciated. strig...@eastlink.ca

Re: Stus-List Removing and replacing windows on a 2004 C

braces and weights >> >> Any particular concerns? >> >> Joh >> >> Sent from my iPhone >> >>> On Nov 16, 2017, at 7:39 PM, Rod Stright via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> >>> Does anyone out

Stus-List Removing and replacing windows on a 2004 C

Does anyone out there have any tips on removing and replacing windows on a 2004 C vintage sailboat Thanks Rod C 99 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ___ Thanks everyone

Re: Stus-List New water storage tanks

Bladder works great and you can take it put when you don’t want I‎t or to clean I‎t Rid Sent from my iPhone > On Nov 3, 2017, at 7:11 PM, Danny Haughey via CnC-List > wrote: > > Hi guys, > I've been researching new water storage tanks for my boat. > > The current

Stus-List C 35 Mark III

I have a C 35 Mk III spinnaker in like new condition, 1 oz mylar no patches, no dirt great spinnaker if anyone is interested. Regards Rod -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of steve dewar via CnC-List Sent: November-02-17 1:16 PM To:

Re: Stus-List Nicro-Fico 599-600 traveller parts

And all of it has 10 year warranty Sent from my iPhone > On Nov 1, 2017, at 3:34 PM, Gary Nylander via CnC-List > wrote: > > I would consider replacing the whole thing with Garhauer. I am happy with a > boat full of that stuff. > > Gary > 30-1 > > From: CnC-List

Re: Stus-List Nicro-Fico 599-600 traveller parts

I’d go with Garhauer, excellent quality and good prices From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Sent: November-01-17 2:25 PM To: cnc-list@cnc-list.com Cc: Frederick G Street Subject: Re: Stus-List Nicro-Fico

Re: Stus-List Lost at sea...um , yeah

Agree it doesn’t have much to do with C Sent from my iPhone > On Oct 31, 2017, at 7:24 PM, David via CnC-List wrote: > > OKso to not continue the artificial "Drama Fest" I propoae we stop > talking about them...starting now! (Hey...I tried) > > > > Sent from my

Re: Stus-List Serial number

That’s the way I understood the numbering. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Randy Stafford via CnC-List Sent: October-24-17 12:34 PM To: cnc-list@cnc-list.com Cc: Randy Stafford ; Jack Fitzgerald

Re: Stus-List C 99 owners

my 121 but a different beast. John On Oct 23, 2017, at 3:11 PM, Rod Stright via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Just bought a C 99. Are there any owners still on this mailing list, would like to connect with you Regards Rod Halifax

Stus-List C 99 owners

Just bought a C 99. Are there any owners still on this mailing list, would like to connect with you Regards Rod Halifax --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ___ The

Re: Stus-List My email to Rod

Got this one fine Stu Rod Sent from my iPhone > On Oct 22, 2017, at 9:10 PM, Stu via CnC-List wrote: > > Yes I sent an email to the list specifically for Rod. His email address > got bounced when I tried an personal email. So I thought I would try it > this way. > >

Re: Stus-List To Rod Stright

Other one is rodstri...@icloud.com Sent from my iPhone > On Oct 22, 2017, at 12:01 PM, Rod Stright via CnC-List > <cnc-list@cnc-list.com> wrote: > > strig...@eastlink.ca should work > > Sent from my iPhone > >> On Oct 22, 2017, at 11:33 AM, Stu via CnC-L

Re: Stus-List To Rod Stright

strig...@eastlink.ca should work Sent from my iPhone > On Oct 22, 2017, at 11:33 AM, Stu via CnC-List wrote: > > Your email address bounced 2 messages from me. Do you have another address? > > Stu > > > ___ > > The bills

<    1   2