On Mon, 2002-09-16 at 15:29, Ben Reser wrote:
On Mon, Sep 16, 2002 at 02:17:50PM -0500, Steve Bergman wrote:
So, am I just not seeing the negative side to this? Immunix apparently
does not have enough name recognition and influence to make it happen.
But Mandrake does. After seeing
denis == Denis Pelletier [EMAIL PROTECTED] writes:
denis Hello,
denis Like the title says:
denis [root@denis root]# modprobe ide-scsi
denis /lib/modules/2.4.19-11mdk/kernel/drivers/scsi/ide-scsi.o.gz: unresolved symbol
denis GET_STAT
denis modprobe: insmod
Le Mardi 17 Septembre 2002 06:50, Bob Walker a écrit :
I'm encountering CPU runaway - some process is hogging all the CPU time.
All other processes are frozen...After waiting some time, I was able to
notice that 'mrecoveryd' was NICE'd at -20, and X was NICE'd at -10.
I reset them to 0. The
9.0 rc2
When i use the net_monitor, the modem hangs up, seems to connect, but i get
in the window : connection failed
But after a certain time, i see the graphical window showing input/output
data, and the modem's LEDs are on.
But i cannot reach the network neither as a normal user nor as
On 16 Sep 2002, Austin Acton wrote:
They are not available in the file-new menu. (but should be)
They are available ONLY by going to file-new-open and then looking in
/usr/lib/openoffice/share/templates/english
Note, I first considered as templates the File-New (Business Cards,
Labels)
On tisdagen den 17 september 2002 07.34 Ben Reser wrote:
On Tue, Sep 17, 2002 at 07:24:44AM +0200, Oden Eriksson wrote:
Hi.
I still see this:
[root@cooker RPMS]# rpm -Uvh kernel-2.4.19.12mdk-1-1mdk.i586.rpm
Preparing...###
RC2, After EVERY shutdown/reboot, I have to reinitialise samba. Any
suggestions?
--
Richard Burt
PC Support Services (Scotland)
11a Lauderdale Street
Edinburgh
EH9 1DF
T: 07950 401 570
F: 07950 400 081
W: www.pc-support.uk.com
E: [EMAIL PROTECTED]
--
Virus scanned by edNET.
Alan Shoemaker wrote:
mandrakeexpert incident 31347 forwarded to cooker.
when replying, please cc this email address:
[EMAIL PROTECTED]
quoted text below
taupter : 08/09 09:02 : Incident created MDK9.0rc1
doesn't create the character devices when I unplug a CD-ROM
John Rebecca wrote:
Hello all.
At the urging of Alan, I have subscribed to the cooker mailing list to report
bugs. So here goes... :)
I have a problem with the mouse testing during Mandrake install which has been
around since I've been using Mandrake at v7.0. I've had the same problem
I believe I posted an answer to this same question yesterday? The man is
right..scroll first always does the trick for me as well. I always set mine
up as generic PS/2 wheel mouse as well (even though it was a Genius
Netscroll) for good measure. I have NEVER had a bit of trouble out of it
doing
On Tue, 2002-09-17 at 02:51, Robert martin wrote:
If i can get a straight answer to this i will most likely buy a box set
of LM 9
How does one go about setting up a usb palm cradle in Mandrake???
My problem is the /dev/usb/tty/0 and /dev/usb/tty/1 only exist if i am
trying to do a hot
Danny Tholen [EMAIL PROTECTED] writes:
I tried playing freeciv but started the server from a dir which was not my homedir.
The civserver was not able to write my save-games since it tried to write the files
in the
working dir. A small wrapper script could solve this (rename civserver to
[EMAIL PROTECTED] writes:
Hi Guillaume,
I installed RC2 and it worked all the way to the end ; still could not open
According to the logs, you didn't format your / partition so it
installed (well tried to) only 49 packages.
the cd number 2 or 3 during the install and I had to stick to
On Tuesday 17 Sep 2002 09:24, Buchan Milne wrote:
John Rebecca wrote:
Hello all.
I have a problem with the mouse testing during Mandrake install
which has been around since I've been using Mandrake at v7.0. I've
had the same problem on 5 different computers and 4 or 5 different
mice
I don't know if anyone spotted this, and I didn't see
changelogs saying that it's fixed, not 100% sure
but reporting this still, this is at least in beta2.
In install stage for X, after setting your
monitor settings etc, installer asks if I want
to test the configuration - if asking 'no'
and
Richard Burt wrote:
RC2, After EVERY shutdown/reboot, I have to reinitialise samba. Any
suggestions?
chkconfig samba on?
Installed 9.0RC2 on a newly-acquired thinkpad 600x. Install was flawless.
I ran mcc, and saw the new bootsplash theme selector, but there weren't
any themes, so I installed bootsplash-themes (I also ran draksplash via
the 'make theme' button), and then when I restarted drakboot by clicking
On Tuesday 17 Sep 2002 11:44 am, Per Øyvind Karlsen wrote:
Richard Burt wrote:
RC2, After EVERY shutdown/reboot, I have to reinitialise samba. Any
suggestions?
chkconfig samba on?
output from 'chkconfig samba on' before configuring:
[root@pc-support pc-support]# chkconfig samba
On Monday 16 September 2002 11:12 pm, David Walluck quipped:
I have the same mouse and the same symptoms. It seems okay if you don't
use the mouse after the test phase, but if you mouse the mouse during
the test phase, then forget it -- the system can even lock up on you then.
The odd thing
I've had a similar problem on the 9.0 Beta 1 on two different Siemens laptops
with external PS2 microsoft wheel mice.
At a certain point in the install, the mouse pointer kept jumping to one corner.
Same behaviour in KDE when you finally get it running.
Fixed the problem by enabling 'emulate 3d
On Tue, 2002-09-17 at 09:24, Buchan Milne wrote:
(And yes, I have made sure to move the wheel first.)
What happens if you:
1)read the instructions
2)Scroll the wheel as the first thing you do (assuming you have a wheel).
Buchan, what happens if you:
1)actually read the mail before
-Original Message-
From: Richard Burt [mailto:[EMAIL PROTECTED]]
Sent: 17 September 2002 12:23
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] Samba problems with RC2
On Tuesday 17 Sep 2002 11:44 am, Per Øyvind Karlsen wrote:
Richard Burt wrote:
RC2, After EVERY shutdown/reboot, I have
Alas, the new urpmi/grpmi/gurpmi/rpmdrake didn't fix
it :o( What can I do to force urpmi to download newer
hdlists?
--- David Walser [EMAIL PROTECTED] wrote:
ok, so /var/cache/urpmi's subdirs are empty. I go
to
update sources, and see (I added hyphens):
Tim... new news..
I printed the Test Page from the Printer Administration panel in
OpenOffice.org..
and guess what!! it printed great I also printed a document from
OOo, and it printed fine also!
OOo is using this command:
/usr/bin/perl -p -e s=/euro /unused=/Euro /unused= |
Fixed in 12mdk
--- Luis Alves [EMAIL PROTECTED] wrote:
kernel-2.4.19.11mdk-1-1mdk
After installing kernel-2.4.19.11mdk-1-1mdk
my network connection adsl connection didn't work
any more
and when executing
depmod -a
I get depmod: *** Unresolved symbols in ide-scsi
module
To fix all
Adrien Guichard [EMAIL PROTECTED] writes:
Hi again,
1 -
/usr/bin/lspcidrake (ldetect-0.4.6-6mdk) list my sandisk :
[ . . . ]
Removable:memory_card: SanDisk Corp.|SDDR-31 ImageMate CompactFlash Reader /
ImageMate SDDR-31 [Mass Storage|SCSI|Bulk (Zip)]
[...]
The problem is that:
-
Aleksander Adamowski [EMAIL PROTECTED] writes:
There's a relatively new option recognized by recent kernels for vfat
filesystems: showexec. It is there to replace the noexec option
(which seems to not work now with 2.4.18).
The showexecoption causes only .exe, .com and .bat files to be +x
urpmi confirms that samba is installed yet webmin tells me that the smb.conf
was not found in /etc/
Doing a search for smb.conf on my system finds it in /etc/samba/ so after
updating the module configuration in webmin, I can see my samba settings and
they appear to be okay.
Why is the smb.conf
I didn't do anything special at all! I plugged in my Visor's USB cradle,
selected configuration-gnome-peripherals-pilot link from the Mandrake
menu, and followed the directions. I sync with Evolution daily. (Until
9.0, I had to use the serial cradle to sync).
The only hitch is that the
Thank you very much for your report, I only want to tell you that my
name is Till, not Tim.
Till
SpamKill wrote:
Tim... new news..
I printed the Test Page from the Printer Administration panel in
OpenOffice.org..
and guess what!! it printed great I also printed a
Paolacci, Sebastian wrote:
-Original Message-
From: Richard Burt [mailto:[EMAIL PROTECTED]]
Sent: 17 September 2002 12:23
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] Samba problems with RC2
On Tuesday 17 Sep 2002 11:44 am, Per Øyvind Karlsen wrote:
Richard Burt wrote:
RC2,
On Tue, 17 Sep 2002 08:29:02 +, Richard Tango-Lowy wrote:
--=-41WYKLRqHjVCIQcZbDBB
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
I didn't do anything special at all! I plugged in my Visor's USB cradle,
selected configuration-gnome-peripherals-pilot link from the
On Tuesday 17 Sep 2002 1:36 pm, Per Øyvind Karlsen wrote:
Paolacci, Sebastian wrote:
-Original Message-
From: Richard Burt [mailto:[EMAIL PROTECTED]]
Sent: 17 September 2002 12:23
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] Samba problems with RC2
On Tuesday 17 Sep 2002 11:44 am,
I have boot set up to 800x600 and it looks
good and pretty. My monitor detected correctly
(30Khz-70Khz FH) and the same behaviour is
observed when I select custom monitor and specify
these parameters.
However, on shutdown/restart, frequency is way
above 70Khz.
How do I change that? It's
Richard Burt wrote:
urpmi confirms that samba is installed yet webmin tells me that the smb.conf
was not found in /etc/
Next time:
[bgmilne@bgmilne rpm]$ rpm -qc samba-common
/etc/samba/lmhosts
/etc/samba/smb-winbind.conf
/etc/samba/smb.conf
Doing a search for smb.conf on my system finds
http://gallery.menalto.com/modules.php?op=modloadname=Newsfile=index
It allows users to build their own picture albums web site,
with a very easy java interface, that uploads all the pictures your
mandrake box
where ever you are.
It's very sophisticated and even show the camera settings when
Robert B [EMAIL PROTECTED] writes:
I tried the 2.2.19 kernel image.
The install worked, but when the computer rebooted after the installation it
hangs at the message:
Freeing unused kernel memory: 136k freed
Ok, this was probably related to the buggy 2.4 kernel with C3
detected as a i686,
Has anyone looked into this? I did a bit...looking at
messages after booting, I see:
Sep 17 08:45:15 mccarthy ypbind: ypbind startup
succeeded
Sep 17 08:45:15 mccarthy ypbind[977]: Unable to
register (YPBINDPROG, YPBINDVERS
, udp).
then later:
Sep 17 08:45:07 mccarthy network: Setting network
Richard Burt wrote:
On Tuesday 17 Sep 2002 1:36 pm, Per Øyvind Karlsen wrote:
Maybe 'chkconfig --add smb' ?
^^^
did this but still got:
[root@pc-support pc-support]# chkconfig samba on
^
error reading information on
Just make a backup of your configs, uninstall the apache and php stuff you
have, rm -rf /etc/http*, install new apache (v1.2.26 and/or v2.0.40), fix
config manually. J-M Dault has made a huge and very nice job making this
work. But as you probably have a cooker install it's safer and
-Original Message-
From: Richard Burt [mailto:[EMAIL PROTECTED]]
Sent: 17 September 2002 13:57
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] Samba problems with RC2
On Tuesday 17 Sep 2002 1:36 pm, Per Øyvind Karlsen wrote:
Paolacci, Sebastian wrote:
-Original Message-
From:
Tibor Pittich [EMAIL PROTECTED] writes:
if i click at Console icon in System menu it exec xterm and
after cca. 2 secs crash this xterm window, and drakconf going into
freeze..
rpm -qa 'drakconf rxvt' ?
cat ~/.i18n ?
It is already set as a servie to start at boot.
On Tuesday 17 Sep 2002 2:22 pm, Buchan Milne wrote:
Richard Burt wrote:
On Tuesday 17 Sep 2002 1:36 pm, Per Øyvind Karlsen wrote:
Maybe 'chkconfig --add smb' ?
^^^
did this but still got:
[root@pc-support
On Tuesday 17 Sep 2002 1:56 pm, Buchan Milne wrote:
Richard Burt wrote:
urpmi confirms that samba is installed yet webmin tells me that the
smb.conf
was not found in /etc/
Next time:
[bgmilne@bgmilne rpm]$ rpm -qc samba-common
/etc/samba/lmhosts
/etc/samba/smb-winbind.conf
This theme slipped in very quietly: it looks good and does an excellent
job of reducing the visual differences between the KDE 3.0.3 and Gnome
2.0.1 default desktops ;)
I note a few minor glitches with gtk2 applications:
i. In toolbars, the arrows denoting drop-down menus (such as those in
the
Hello all,
I am new to the list and have just installed 9.0 RC2 on my Sony Vaio
PCG-SR17 notebook. It works well, however there seems to be a problem with
wireless setup in the control center. When I insert the card (Orinoco Gold
Card), it lights up fine and is detected properly. Here is
Pixel [EMAIL PROTECTED] writes:
Adrien Guichard [EMAIL PROTECTED] writes:
[ . . . ]
The problem is that:
- there is no /dev/scd* device corresponding to the scsi_mod,
it is /dev/sda* and /dev/sdb*
there are also no /dev/sd* files. I am unable to mount my memory flash (but
I could with
On Tue, 17 Sep 2002 15:22:21 +0100, Alastair Scott wrote:
--=-7LQjOR3rJO0ubjHO8AUo
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
This theme slipped in very quietly: it looks good and does an excellent
job of reducing the visual differences between the KDE 3.0.3 and
- Original Message -
From: Jean-Michel Dault [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, September 17, 2002 8:37 PM
Subject: Re: [Cooker] New Apache 2 Questions/Issues
Just make a backup of your configs, uninstall the apache and php stuff
you
have, rm -rf /etc/http*,
--- Original Message ---
From: David Walser [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: Re: [Cooker] ypbind fails on boot
Has anyone looked into this? I did a bit...looking at
messages after booting, I see:
Sep 17 08:45:15 mccarthy ypbind: ypbind startup
succeeded
FYI:
I go into Adjust Date and Time... in KDE, and try to change the Time
Zone, and it pops up with the following error:
Error setting new Time Zone!
It has UTC in the Time Zone, and it won't change.
BTW, I did try setting up the Time Server, and set my local time zone
correctly, and it sets
--- Original Message ---
From: Adrien Guichard [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] drakconf-9.0-2mdk and sandisk ...
Pixel [EMAIL PROTECTED] writes:
Adrien Guichard [EMAIL PROTECTED] writes:
[ . . . ]
The problem is that:
- there is no /dev/scd* device
kernel-2.4.19.7mdk-1-1mdk is still giving unresolved symbols in
ov511 webcam driver, and the se401 driver is not creating the
/dev/v4l devices.
--
Gary Lawrence Murphy - [EMAIL PROTECTED] - TeleDynamics Communications
- blog: http://www.auracom.com/~teledyn - biz: http://teledyn.com/ -
My packages are designed to do a seamless upgrade, but only from the
stable packages (either 8.x or 9.0), not from Oden's versions.
I'm bad, I never had any _upgrades_ in mind for 2.x, nor the requirements, I
was just too darn busy making it tick :-)
Hey, you did a great job! =) It ticks!
Hi,
At boot time in no quiet mode, harddrake (I think this is this
service) blacks out the screen, then the service [OK] lines resume.
Using a suitable font, I could previously see on my screen the
whole boot process, now I have to pay attention to what happens
because the begining is wiped out
Ben Reser [EMAIL PROTECTED] writes:
On Mon, Sep 16, 2002 at 11:12:46AM +0200, Guillaume Cottenceau wrote:
Is devfsd dead by any chance?
I can't be sure now because I've since rebooted with the new kernel. Is
there something I can do to test this for you?
Next time you see the bug, check
Hi
tuxpuck seems to crash on my PC, it loads up, displays the credits
screen and on pressing the mouse button you get
Fatal Signal: Segmentation Fault (SDL Parachute Deployed)
i've tried this with current cooker version and the new 0.7.116 version,
both say the same.
this is on a pc with the
Good to see the gripe-button in harddrake2! I didn't want to post
this there because it may be totally benign ..
sbus_probing::main::prom_walk() called too early to check prototype at
/usr/lib/libDrakX/sbus_probing/main.pm line 126.
sbus_probing::main::prom_walk() called too early to check
don't know what happened to the v4l devices, but unplugging the
camera and plugging it back in reset them and created the right
device files. another false-alarm :(
ov511.o is still broken though.
--
Gary Lawrence Murphy - [EMAIL PROTECTED] - TeleDynamics Communications
- blog:
Hey Guillaume,
I'm not an autoconf expert, but this program seems to be tricking your
/usr/bin/autoconf script:
bash-2.05b$ ./autogen.sh
Running autoheader
FATAL ERROR: Autoconf version 2.52 or higher is required for this script
Running aclocal
Running automake
Running autoconf
FATAL ERROR:
Richard Burt wrote:
When i go into mcc/server configuration/samba i am told that samba is not
installed (this happens EVERY time) and to click 'ok' to install. I then have
to setup samba services, workgroup and banner - that is what i mean by
reinitialising! Before doing this, i cannot
- Original Message -
From: Jean-Michel Dault [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, September 17, 2002 10:34 PM
Subject: Re: [Cooker] New Apache 2 Questions/Issues
My packages are designed to do a seamless upgrade, but only from the
stable packages (either 8.x or
St?phane Teletch?a wrote on Tue, Sep 17, 2002 at 09:29:26AM +0200 :
Le Mardi 17 Septembre 2002 06:50, Bob Walker a ?crit :
I'm encountering CPU runaway - some process is hogging all the CPU time.
All other processes are frozen...After waiting some time, I was able to
notice that
Alan Shoemaker [EMAIL PROTECTED] writes:
bootsplash was not the default. I had to change the
vga=normal setting to a framebuffer setting and then make a
choice in the control center to get bootsplash to work. this
occurred on a system with a voodoo 3 3000, but not on one
with an
End of the terminal : (rxvt for example)
1 do a ls
2 resize (make bigger width)
3 hit return to hit the bottom.
4 try to ls a long file (something longer than the width of the terminal) and
move back in the ls ; the line scrolls up instead of going to the next line
!!!
This was present in 8.2,
On Tue, 2002-09-17 at 16:47, Adam Williamson wrote:
Another couple:
1. If I drag a scrollbar in a GTK1 app, the scrollbar background (with
the little darker grey groove gets wiped and replaced with a sold,
smooth grey block. If I then move the cursor out of the window and back
in (making
St?phane Teletch?a wrote on Tue, Sep 17, 2002 at 06:35:09PM +0200 :
This was present in 8.2, and still in 9.0rc2 ?
Is it known yet ?
I think rxvt is a light xterm and that's why it is used instead of xterm, but
it is buggy !!!
A very annoying bug.
Yes, it was also present in 8.0 and 8.1.
Does anyone know why after going to full screen with -fs or just the f key,
mplayer will not return from full screen? Pressing the f key seems like it
tries, but doesn't actually succeed.
I compiled the latest mplayer following the directions in the files. This
occurs on both my laptop (sony
Crispin Boylan [EMAIL PROTECTED] writes:
Hi
tuxpuck seems to crash on my PC, it loads up, displays the
credits screen and on pressing the mouse button you get
Fatal Signal: Segmentation Fault (SDL Parachute Deployed)
thx, examining. seems to be the vorbis library having trouble
decoding
Works fine here...
I can list the flash card /dev/sda1 mounted with supermount,
fs=auto in the USB imagemate. The card has a FAT16 file system
and I am using kernel-2.4.19.12mdk.
-11mdk had some problems, could it be the reason?
I also use this kernel.
I attached more informations from
Another couple:
1. If I drag a scrollbar in a GTK1 app, the scrollbar background (with
the little darker grey groove gets wiped and replaced with a sold,
smooth grey block. If I then move the cursor out of the window and back
in (making the app non-active then active again), the background is
--- Quel Qun [EMAIL PROTECTED] wrote:
I answered your message asking a question:
Do you have portmap service enabled?
# chkconfig --list portmap should show it on.
Nope, that fixed it. Thanks Quel!!!
Now...! Could the description in /etc/init.d/portmap
that says The portmap server must be
Actually, I have found that when the Emulate 3rd button option is set in
XFree86Config-4 that this is when my mouse stops responding properly the way
you mention! I have to delete that line and either add or verify the line
ZAxisMapping 4 5 is present. Mandrake does have a known issue with this
You wrote.
same here, but I have the same problem with a real PS2 mouse.
I only use PS/2 mouse and have this problem.
I would have no problem with the mouse even being disabled until the test
screen since that seems to fix the problem,
Why disable? It works fine if you make sure to move
Hello!
Please get rid of the default emacs color scheme in Mandrake 9.0rc2.
It's hideous, does not resemble any other application, and it's hard to
get rid of since it's both in the files /etc/X11/Xresources and
/usr/X11R6/lib/X11/app-defaults/Emacs (from emacs-X11-21.2-12mdk). RedHat
had the
Hey, I own a Wirless Intellimouse and everytime I
try to use it with mandrake 8.2 it develops some kind of positioning error were
it mistakes the back and forward buttons (in the web browser) for actual pointer
direction buttons. The mouse works perfectly fine during the installation and it
Looks similar as when you try to compile kde with automake 1.6 (instead of
1.4).
I thought kde was at fault, but since Laurent seems to ignore my mails,
maybe it is the script.
On 17 Sep 2002, Austin Acton wrote:
Hey Guillaume,
I'm not an autoconf expert, but this program seems to be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 17 September 2002 13:12, Robert J. Rossana wrote:
David:
Thanks for your suggestions on dealing with the lockups. I did a bios
update for my motherboard (there is no bios update on the Leadtek web
site that I can find for my video
After upgrading to 9.0 rc2 rpms,
[root@elmo cyrus-sasl-1.5.27]# rpm -qa | grep postfix
postfix-1.1.11-3mdk
[root@elmo cyrus-sasl-1.5.27]# rpm -qa | grep sasl
libsasl7-plug-crammd5-1.5.27-5mdk
libsasl7-plug-anonymous-1.5.27-5mdk
libsasl7-plug-plain-1.5.27-5mdk
cyrus-sasl-1.5.27-5mdk
The error occur when drakgw try to reload the Alcatel
Speedtouch driver (mgmt.o - why kill it and reload it, I
think just kill ppp could be better ?) and drakgw
freeze.
I have the drakxtools 49.
Here the output of drakgw :
# drakgw
Arrêt de dhcpd :
[ OK ]
Arrêt de named :
[ OK ]
SIOCDELRT:
Pixel wrote:
anyway, i don't really know if that's the right solution. This is
no replacement for noexec, but more like a replacement for exec.
noexec doesn't seem to work, so...
--
Olo
GG#: 274614
ICQ UIN: 19780575
http://olo.office.altkom.com.pl
Does anyone know why after going to full screen with -fs or just the f key,
mplayer will not return from full screen? Pressing the f key seems like it
tries, but doesn't actually succeed.
I compiled the latest mplayer following the directions in the files. This
occurs on both my laptop (sony
Richard Burt [EMAIL PROTECTED] writes:
[root@pc-support pc-support]# chkconfig samba on
error reading information on service samba: No such file or
directory
do an rpm -q smb webmin and send the results...something is not
right in your box...I haven't seen such behaviour.
Vox
--
On Tuesday 17 Sep 2002 6:27 pm, Vox wrote:
Richard Burt [EMAIL PROTECTED] writes:
[root@pc-support pc-support]# chkconfig samba on
error reading information on service samba: No such file or
directory
do an rpm -q smb webmin and send the results...something is not
right in your
mandrakeexpert incident 32091 forwarded to cooker.
sorry no emailaddress is listed in the mandrakeexpert
database for the originator of this report.
quoted text below
seanbyrne : 17/09 01:55 : Incident created I have a
problem with certain CDs in all the beta - RC2 versions of
mandrakeexpert incident 32113 forwarded to cooker.
when replying, please cc this email address: [EMAIL PROTECTED]
quoted text below
sergiojr : 17/09 08:21 : Incident created I tried to
install M9rc2 with USB disabled in BIOS. Installation stops
at second stage. In logs it says
It is impossible to disable automatic start at login. Moreover, configuration
windows is not internationalised...
--
Guillaume Rousse [EMAIL PROTECTED]
GPG key http://lis.snv.jussieu.fr/~rousse/gpgkey.html
[guillaume@baader guillaume]$ head /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
...
--
Guillaume Rousse [EMAIL PROTECTED]
GPG key http://lis.snv.jussieu.fr/~rousse/gpgkey.html
Msec adds several entries in /etc/sysctl.conf.
It would very helpful to have comments above those entries, stating they were
automatically added, and explaining reason, such as:
# automatically added by msec
# ignore all ping request
net.ipv4.icmp_echo_ignore_all=0
--
Guillaume Rousse [EMAIL
Richard Burt [EMAIL PROTECTED] writes:
On Tuesday 17 Sep 2002 6:27 pm, Vox wrote:
Richard Burt [EMAIL PROTECTED] writes:
[root@pc-support pc-support]# chkconfig samba on
error reading information on service samba: No such file or
directory
do an rpm -q smb webmin and send the
as a workaround you can use 'mplayer -vo sdl'
-if you compiled it with sdl support
bye,
gabor
On Tue, 2002-09-17 at 21:40, Robert Denier wrote:
Does anyone know why after going to full screen with -fs or just the f key,
mplayer will not return from full screen? Pressing the f key seems like
Already suggested, without any reply so far...
Current root .bashrc source global /etc/bashrc, then redefine PATH. However,
bash completion is defined through /etc/bashrc only for commands present in
PATH, so won't works for all /sbin and /usr/sbin commands, such as urpmi.
Just redefining
Since a few days, all accentuated characters are not usable anymore from
kvirc. I had a look at kdelibs ant libqt3 changelog without noticing anything
related, apart undescribed Pablo's patch to libqt3.
Any clue ?
--
Guillaume Rousse [EMAIL PROTECTED]
GPG key
Vox [EMAIL PROTECTED] writes:
I hate to piggyback on my own posts, but...
Richard Burt [EMAIL PROTECTED] writes:
On Tuesday 17 Sep 2002 6:27 pm, Vox wrote:
Richard Burt [EMAIL PROTECTED] writes:
[root@pc-support pc-support]# chkconfig samba on
error reading information on service
Guillaume Rousse [EMAIL PROTECTED] writes:
Already suggested, without any reply so far...
Current root .bashrc source global /etc/bashrc, then redefine PATH. However,
bash completion is defined through /etc/bashrc only for commands present in
PATH, so won't works for all /sbin and
On Tuesday 17 Sep 2002 10:21 pm, Vox wrote:
Richard Burt [EMAIL PROTECTED] writes:
On Tuesday 17 Sep 2002 6:27 pm, Vox wrote:
Richard Burt [EMAIL PROTECTED] writes:
[root@pc-support pc-support]# chkconfig samba on
error reading information on service samba: No such file or
On Tue, Sep 17, 2002 at 11:14:41PM +0200, Guillaume Rousse wrote:
It is impossible to disable automatic start at login. Moreover, configuration
windows is not internationalised...
Works for me... kcontrol|System|Alarm Daemon, uncheck the Start alarm
daemon automatically at login. I seem to
No, the application is non-standard.
Austin
On Tue, 2002-09-17 at 12:22, [EMAIL PROTECTED] wrote:
Looks similar as when you try to compile kde with automake 1.6 (instead of
1.4).
I thought kde was at fault, but since Laurent seems to ignore my mails,
maybe it is the script.
On 17 Sep
Hi,
I have a problem with KBabel translator...
The system is:
MDK 9.0 RC2 with the latest cooker updates.
Installed language support: English, Finnish, Swedish.
Finnish set as default language.
The system and the ispell translator accepts and uses the
ISO-8859-15 charset, but in the settings
Richard Burt wrote on Tue, Sep 17, 2002 at 10:44:37PM +0100 :
[root@pc-support pc-support]# rpm -q smb webmin
package smb is not installed
webmin-1.000-1
Did as you suggested, removed all samba stuff, reboot, install samba client,
server common, reboot, go to mcc/server
1 - 100 of 133 matches
Mail list logo