Re: [courier-users] Courier and folders *not* as subdirs of Inbox
Steven Maddox (Architect) wrote: Hi, any ideas on this? IRC seems to have none :D 01:18pm Cyorxamp Lo, I'm using courier with syscp and I connect using IMAP 01:19pm Cyorxamp my folders (including sent, drafts, junk) etc... all seem to be subdirs of Inbox 01:19pm Cyorxamp anyway I can have them in the traditional 'along side' way? 03:35pm leeps i think that is not possible with courier, cyorxamp. but, in case you find a solution, i'd be grateful if you'd let me know about it. 03:35pm Cyorxamp :( thats all I keep hearing 03:35pm leeps maybe write to sam about it :) 03:36pm Cyorxamp whos sam? 03:36pm leeps sam is the developer of courier :) Please tell me theres a way! :D This is not a limitation of courier, its a bug/misconfiguration of your IMAP client. See if this link helps. http://www.courier-mta.org/FAQ.html#namespace -- Sincerely... Steven Maddox (Architect) Function Office http://www.functionoffice.com - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] (no subject)
Vasiliy Kotikov wrote: Hello! This morning I have got this reply from courier mail server 0.54.2 - -- UNDELIVERABLE MAIL Your message to the following recipients cannot be delivered: [EMAIL PROTECTED]: This domain's DNS violates RFC 1035. - -- Anyway domain exists in DNS nslookup set type=MX bestguidedes.info Server: 127.0.0.1 Address:127.0.0.1#53 Non-authoritative answer: bestguidedes.info mail exchanger = 10 217.20.163.50. This is the problem, a MX record cannot be an IP address Authoritative answers can be found from: bestguidedes.info nameserver = ns1.fastmessage.org. bestguidedes.info nameserver = ns2.fastmessage.org. ns1.fastmessage.org internet address = 62.149.13.107 ns2.fastmessage.org internet address = 217.20.163.50 Please, why .info DNS violates RFC 1035, what could be the problem ? this has nothing to do with .info, it has to do with the lack of proper administration by bestguidedes.info Vasiliy Kotikov - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] multiply mail-addresses problem
On Mon, December 4, 2006 12:42 pm, Anton Basistov wrote: I have some problem: If I want to send a letter to many recipients, I type many addresses in TO. And if the only one address is nonexistent (and it is at local domain) Courier does not take my letter at all during email-client-smtp-session. And it does not say which address is wrong. Sam already answered this question the last time you asked it. The mail CLIENT sends this information one address at a time to courier, courier tells the client at the time its sent that the address is nonexistent. It is the mail CLIENTS job to tell you which one. Do you know, how can I fix it? I want Courier to take the mail in any case, and just to send back error msg, if error. Courier can if your mail CLIENT tells it to. You are barking up the wrong tree. Anton. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] localhost relaying 513
Kóczán Péter said: Hi, I've seen many posts regarding to this topic, but none of them seemed to solve my problem. I've changed configuration and now an tiny smtp client from chroot connects to localhost:25, in order to send mail from php. This simply does not work. smtpaccess is ok, I have 127.0.0.1 allow,RELAYCLIENT in it, but it still does not accept mail. what is in your log? did you run makesmtpaccess? Please advice. Regards, Peter Koczan --- This SF.Net email is sponsored by the JBoss Inc. Get Certified Today * Register for a JBoss Training Course Free Certification Exam for All Training Attendees Through End of 2005 Visit http://www.jboss.com/services/certification for more information ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] can somebody help me with authmysql?
Lucas Silvero said: I have postfix with mysql and courier-imap pop authmysql. I see that courierpop3login does not speak with mysql. This is the listing of demons running: 1747 ?S 0:00 /usr/sbin/couriertcpd -pid=/var/run/courier/pop3d.pid -stderrlogger=/usr/sbin/courierlogger -maxprocs=40 -maxperip=4 -nodnslookup -noidentlookup -address=0 110 /usr/lib/courier/courier/courierpop3login /usr/lib/courier/courier/courierpop3d Maildir 1695 ?S 0:00 /usr/sbin/courierlogger -pid=/var/run/courier/authdaemon/pid -start /usr/lib/courier/authlib/authdaemond.mysql 1696 ?S 0:00 /usr/lib/courier/authlib/authdaemond.mysql 1697 ?S 0:00 /usr/lib/courier/authlib/authdaemond.mysql 1698 ?S 0:00 /usr/lib/courier/authlib/authdaemond.mysql 1699 ?S 0:00 /usr/lib/courier/authlib/authdaemond.mysql 1700 ?S 0:00 /usr/lib/courier/authlib/authdaemond.mysql 837 ttyp2S 0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock when attempt to connect via to me telnet to port 110 passes this: Trying 192.168.0.3... Connected to pcdebian.CS. Escape character is '^]'. +OK Hello there. user [EMAIL PROTECTED] +OK Password required. pass pepe -ERR Login failed. that it can be happening? how about the output of cat authdaemonrc| grep authmodulelist and verify your settings in authmysqlrc, post them here if you are unsure also how about a row from your database for the [EMAIL PROTECTED] user --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Notice: mail delivery status messages sent to Postmaster on secondary MX delivery failures?
Flavio Stanchina said: Sam Varshavchik wrote: Is there any way to configure Courier to *not* generate DSNs for this kind of situation? No. This is how SMTP is supposed to work. You will have to either stop using a secondary MX, or reconfigure your spam filter to drop unwanted mail, instead of rejecting it. That's fine, but how does one set up a backup MX without a secondary MX? a backup MX is not really needed anymore, everyone on the internet that is running a mailserver should have a good enough connection to recieve mail in a timely fashion. Even if your mailserver is not reachable for over a day the sending mailserver will queue it up for typically many days before you will start losing mail. -- Saluti, Flavio Stanchina --- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77alloc_id492op=click ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] esmtp disconnect from server
dick hoogendijk said: On Wed, 20 Jul 2005 17:12:12 +0200 dick hoogendijk [EMAIL PROTECTED] wrote: With telnet lothlorien 25 I get: trying 192.168.11.22... Connected to pooh.nagual.st. Escape character is ']'. Connection closed by foreign host This should of course be : With telnet lothlorien 25 I get: trying 192.168.11.1... Connected to lothlorien.nagual.st. Escape character is ']'. Connection closed by foreign host Have you looked in your logs? courier always logs a connection attempt unless its denied by smtpaccess. if you dont get anything in your logs look in your smtpaccess -- dick --- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77alloc_id492op=click ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] PGSQL accounts dont work
Anton Basistov said: I has installed Courier, PgSQL and Quica. But now I can't login to Courier like pgsqldb-account-user, and it do not deliver mail at all. Default mail delivery is maildrop. What is the problem? Logs would help, courier config files would help too. Anton B. --- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77alloc_id492op=click ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] PGSQL accounts dont work
Anton Basistov said: *This message was transferred with a trial version of CommuniGate(tm) Pro* Ok, which conf files I must show? Since you know which ones you edited during install, I would start there. At a minimum I would show the output of more authdaemonrc | grep authmodulelist courierauthtest myusername more authpgsqlrc| grep PGSQL and the output of a telnet session to port 25 to show a proper smtp session In log's written just imapd: LOGIN FAILED when I try to login and courieresmtpd: 550 USER UNKNOWN when try to send e-mail please don't send a mini snippet from a line in the log, send all the information involved in a transaction, from the connection opening, up until the connection is closed All this information has been covered in the archives and is general information you need to send when expecting help on a mailing list. - Original Message - From: Tim Hunter [EMAIL PROTECTED] To: courier-users@lists.sourceforge.net Sent: Tuesday, June 28, 2005 5:37 PM Subject: Re: [courier-users] PGSQL accounts dont work *This message was transferred with a trial version of CommuniGate(tm) Pro* Anton Basistov said: I has installed Courier, PgSQL and Quica. But now I can't login to Courier like pgsqldb-account-user, and it do not deliver mail at all. Default mail delivery is maildrop. What is the problem? Logs would help, courier config files would help too. Anton B. --- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77alloc_id492op=ick ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477alloc_id=16492op=click ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77alloc_id492op=click ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Courierimapkeywords
Anderson Nadal said: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello. How courierimapkeywords works? It's used for what? http://www.courier-mta.org/imap/README.imapkeywords.html []'s Nadal --- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77alloc_id492op=click ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Courier / PAM question...
STEVEN COCKAYNE wrote: Okay... Im using a Debian-based linux running the APT packages for Courier... I have the authdaemonrc file configured to use authpam, but Im not entirely sure how to configure PAM so that it will read my /etc/shadow file. I was told it did this by default using the APT packages, but mine doesnt seem to be working correctly. Could anyone give me a step-by-step on how to configure this? open /etc/courier/authdaemonrc change the line to authmodulelist=authshadow then /etc/init.d/courier-authdaemon restart As a little bit of background, my employer is having me configure their new mail server because Im the only one with Linux experience... Im no admin (more of a power-user), but I learn pretty quick, and I can follow guides pretty easily. If anyone could help me out, that would be great. As stands, when I telnet to the imap2 port on the machine, courier responds, however all logins are rejected. Cyrus was working with SASL to authenticate, but I need Courier set up to allow me to use the previous mail (old server) on the new server. Any ideas? Thanks, Steven --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61 plasma display: http://www.necitguy.com/?r=20 ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Re: vpopmail+courier+mysql (problem with authdaemond: mysqlserver has gone away)
list wrote: More Information on this, I turned on authlib's debug output...and I get these lines in my maillog now. Does this help anyone? sure find out why your vpopmail responds with vmysql: sql error[3]: MySQL server has gone away mail1 authdaemond: received auth request, service=imap, authtype=login mail1 authdaemond: authvchkpw: trying this module mail1 authdaemond: vmysql: sql error[3]: MySQL server has gone away mail1 authdaemond: vchkpw: user does not exist mail1 authdaemond: authvchkpw: REJECT - try next module mail1 authdaemond: FAIL, all modules rejected I can assure you that the user DOES exist, and so does the domain...because I can login via a pop3 client, just not using webmail. My setup: Courier-imap 4.0.2 Courier-authlib 0.55 PHP 5.0.4 Apache 1.3.33 Squirrelmail 1.4.4 and I tried 1.5.0 Compatibility plugin secure_login plugin Vpopmail 5.4.10 MySQL 4.1.12 Slackware Linux 10.1 All software was installed from source. The problem, which I have not seen anyone else state EXACTLY, is that squirrelmail refuses to authenticate. Pop3 and smtp both work perfectly fine via a pop3 email client, vpopmail is interfacing with mysql just fine and I can check my mail using an email client. But, as soon as I try to login with squirrelmail (and I even tried using sqwebmail) authentication fails. I always get the same errors in my maillog: mail1 imapd: Connection, ip=[:::127.0.0.1] mail1 imapd: LOGIN FAILED, user=, ip=[:::127.0.0.1] mail1 httpd: Squirrelmail login failed for Username : , Password : mail1 imapd: Disconnected, ip=[:::127.0.0.1], time=5 (username and password were replaced by me, they were correct) However, sometimes along with that I get this very familiar error: mail1 authdaemond: vmysql: sql error[3]: MySQL server has gone away Which I'm sure most of you have seen before in a few circumstances. As I stated before, vpopmail works with mysql just fine, and I'm triple and quadruple checked my squirrelmail username and password that is being used to access the mysql database. I can't find any information that helps me with this, I've searched and searched...please give me an easy answer. If you need more info, or anything clarified, please let me know...this is driving me crazy! ;) --- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7412alloc_id=16344op=click ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] smarthost in esmtproutes not followed
Arturo 'Buanzo' Busleiman wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 People, I have an esmtproutes file like this: TAB: [$SMARTHOST_IP] :[$SMARTHOST_IP] No Tab http://www.courier-mta.org/courier.html I tried with nothing in front of the :, and with one space (chr32). Anyway, mail is not relayed through the smarthost, but MX records are looked up and used. What is wrong? Courier is version 0.48.2.20050203 (Gentoo ebuild). --- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7393alloc_id=16281op=click ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] pop3 collector that is suitable for courier-imap
Michael Jrgens wrote: Hello, Im looking for a pop3 collector that is suitable for Maildirs. Can anybody help? Regards, Michael courier-imap includes a pop3 server as well --- SF email is sponsored by - The IT Product Guide Read honest candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Failed configure with latest courier-authlib
Haven Skys wrote: While running configure (during the build process) I get an error that I don't have vpopmail installed and exits. the build process detected that you have a vpopmail user but dont have the required libraries remove the vpopmail user from your system or pass the appropriate flags to ./configure to ignore it Please note this is not a question about vpopmail because I do not want to use vpopmail I am intending to use imap. No disrespect intended, it seems ridicules that I would need to have vpopmail installed so I figure there must be some other problem here. Can anyone help? SNIP NOTE All questions regarding ANY vpopmail-related problems, such as compiling/building failures, or login errors should be referred to the vpopmail mailing list. Vpopmail questions sent to the Courier mailing lists will be IGNORED. configure: error: /var/vpopmail/etc/lib_deps does not exist - upgrade vpopmail to the current version or fix the permissions on this file /SNIP -Haven --- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag--drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] maildrop at other things
David Somers wrote: Maildrop runs as the user accepting mail, so that user would need to be able to create and write to the log file. Normally, you'd write log files within the user's home directory. The Courier MTA also maintains a system log file that records deliveries. Ah, thanks for clearing that up. This other confusing thing is that maildroprc appears to be only processed for mail sent to my local acounts... and any external mail coming in from the Internet (destined for some domains whose mail Im virtually hosting) seems to bypass the processing Ive put in maildroprc. You probably specified a mail attribute for the accounts. Doing so overrides DEFAULTDELIVERY, so maildrop won't be invoked for accounts that have such an attribute. Instead, you should specify the home for the account, and make sure that there is a ./Maildir/ folder inside that directory. I just followed the instructions as per http://www.courier-mta.org/FAQ.html#virtual ... everything seems to work, apart from getting the filtering to apply. can you show us a sample user record that does work, and one that doesnt work? I am pretty sure you have a mail attribute set as well, remove that and maildrop will work Cheers, David --- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almosthttp://www.thinkgeek.com/sfshirt ___ courier-users mailing list courier-users@lists.sourceforge.net Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Re: OpenBSD 3.6 and Courier 0.47: Outbound
John Saunders wrote: Either you're kidding me, or your C compiler has a bug. I got the same result. Then your C compiler has a bug. RedHat Linux 7.3 gcc 2.96 says Sam is right. Microsoft Visual Studio 6 also says Sam is right. Just for the record gcc version 3.3.4 (Debian 1:3.3.4-13) says Sam is right Sounds like a compiler bug to me as well. --- This SF.Net email is sponsored by: InterSystems CACHE FREE OODBMS DOWNLOAD - A multidimensional database that combines robust object and relational technologies, making it a perfect match for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8 ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] courier-pop + ldap + LOGIN FAILED
[EMAIL PROTECTED] wrote: Hello My mail system contains: courier 0.45.6 openldap 2.1.30 Resiving mail works fine(smtp is postfix) but when i try to get mails through pop3 i get an errom msg: courierpop3login: LOGIN FAILED, ip=[:::my.ip.addr] is authdaemond running? Courier log doesn't talk to much but as i know password is ok(tested) my config: /etc/courier/authldap LDAP_SERVER loclhost LDAP_PORT 389 LDAP_PROTOCOL_VERSION 3 LDAP_BASEDN dc=lx, dc=pl LDAP_TIMEOUT20 LDAP_AUTHBIND 1 LDAP_MAIL uid LDAP_FILTER(objectClass=CourierMailAccount) LDAP_GLOB_UID vmail LDAP_GLOB_GID vmail LDAP_HOMEDIRhomeDirectory LDAP_MAILROOT / LDAP_MAILDIRmailMessageStore LDAP_DEFAULTDELIVERYdefaultDelivery LDAP_FULLNAME cn LDAP_CRYPTPWuserPassword LDAP_DEREF never LDAP_TLS0 /etc/ldap/slapd.conf modulepath /usr/lib/ldap moduleload back_ldbm include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/qmail.schema include /etc/ldap/schema/authldap.schema include /etc/ldap/schema/inetorgperson.schema pidfile /var/run/slapd.pid argsfile/var/run/slapd.args replogfile /var/lib/ldap/replog loglevel 65535 databaseldbm suffix dc=lx,dc=pl directory /var/lib/ldap index objectClass eq index mail eq rootdn cn=root,dc=lx,dc=pl rootpw * access to * by dn=cn=root,dc=lx,dc=pl write by * read - my ldif file is: dn: uid=test,dc=lx,dc=pl cn: test uid: test sn: testcik uidNumber: 1072 gidnumber: 101 mail: [EMAIL PROTECTED] mailHost: myserver userPassword: homeDirectory: var/lib/courier/test/ mailMessageStore: var/lib/courier/test/ mailbox: test/Maildir/ ObjectClass: CourierMailAccount objectClass: inetOrgPerson objectClass: qmailuser accountStatus: active and logs looks like that: Oct 5 12:57:43 courierpop3login: Connection, ip=[:::my.ip.addr.] Oct 5 12:57:43 slapd[12042]: daemon: activity on 1 descriptors Oct 5 12:57:43 slapd[12042]: daemon: new connection on 9 Oct 5 12:57:43 slapd[12042]: conn=2 fd=9 ACCEPT from IP=my.ip.addr.:58886 (IP=0.0.0.0:389) Oct 5 12:57:43 slapd[12042]: daemon: added 9r Oct 5 12:57:43 slapd[12042]: daemon: activity on: Oct 5 12:57:43 slapd[12042]: Oct 5 12:57:43 slapd[12042]: daemon: select: listen=6 active_threads=0 tvp=NULL Oct 5 12:57:43 slapd[12042]: daemon: activity on 1 descriptors Oct 5 12:57:43 slapd[12042]: daemon: activity on: Oct 5 12:57:43 slapd[12042]: 9r Oct 5 12:57:43 slapd[12042]: Oct 5 12:57:43 slapd[12042]: daemon: read activity on 9 Oct 5 12:57:43 slapd[12042]: connection_get(9) Oct 5 12:57:43 slapd[12042]: connection_get(9): got connid=2 Oct 5 12:57:43 slapd[12042]: connection_read(9): checking for input on id=2 Oct 5 12:57:43 slapd[12042]: ber_get_next on fd 9 failed errno=11 (Resource temporarily unavailable) Oct 5 12:57:43 slapd[12093]: do_bind Oct 5 12:57:43 slapd[12042]: daemon: select: listen=6 active_threads=1 tvp=NULL Oct 5 12:57:43 slapd[12093]: dnPrettyNormal: Oct 5 12:57:43 slapd[12093]: dnPrettyNormal: , Oct 5 12:57:43 slapd[12093]: do_bind: version=3 dn= method=128 Oct 5 12:57:43 slapd[12093]: conn=2 op=0 BIND dn= method=128 Oct 5 12:57:43 slapd[12093]: send_ldap_result: conn=2 op=0 p=3 Oct 5 12:57:44 slapd[12093]: send_ldap_result: err=0 matched= text= Oct 5 12:57:44 slapd[12093]: send_ldap_response: msgid=1 tag=97 err=0 Oct 5 12:57:44 slapd[12093]: conn=2 op=0 RESULT tag=97 err=0 text= Oct 5 12:57:44 slapd[12042]: daemon: activity on 1 descriptors Oct 5 12:57:44 slapd[12093]: do_bind: v3 anonymous bind Oct 5 12:57:44 slapd[12042]: daemon: activity on: Oct 5 12:57:44 slapd[12042]: 9r Oct 5 12:57:44 slapd[12042]: Oct 5 12:57:44 slapd[12042]: daemon: read activity on 9 Oct 5 12:57:44 slapd[12042]: connection_get(9) Oct 5 12:57:44 slapd[12042]: connection_get(9): got connid=2 Oct 5 12:57:44 slapd[12042]: connection_read(9): checking for input on id=2 Oct 5 12:57:44 slapd[12042]: ber_get_next on fd 9 failed errno=11 (Resource temporarily unavailable) Oct 5 12:57:44 slapd[12088]: do_search Oct 5 12:57:44 slapd[12042]: daemon: select: listen=6 active_threads=1 tvp=NULL Oct 5 12:57:44 slapd[12088]: dnPrettyNormal: dc=lx, dc=pl Oct 5 12:57:44 slapd[12088]: dnPrettyNormal: dc=lx,dc=pl, dc=lx,dc=pl Oct 5 12:57:44 slapd[12088]: SRCH dc=lx, dc=pl 2 0 Oct 5 12:57:44 slapd[12088]: 0 0 0 Oct 5 12:57:44 slapd[12088]: begin get_filter Oct 5 12:57:44 slapd[12088]: EQUALITY Oct 5 12:57:45 slapd[12088]: end get_filter 0 Oct 5 12:57:45
Re: [courier-users] how to prevent wrong mail delivery
chester c young wrote: with two local domains d1.com and d2.com having users u1 and u2 respectively. if mail is wrongly addressed to u2ATd1.com, how do you bounce the mail and/or insure u2 does not receive it by accident? how do you know that [EMAIL PROTECTED] is wrongly addressed? --- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Configuring courier to deliver to Maildirs
Upayavira wrote: I have installed Courier onto a Debian system, using the Debian packages that come with Sarge. When I send a simple email, using the ESMTP part of Courier, it delivers that message into a mbox format file called Maildir in the user's home directory. If I create a proper maildir in the user's home directory first, and then I get a message: [date] colinux courierlocal: id=,,,from=[EMAIL PROTECTED],addr=[EMAIL PROTECTED], maildir.open: ./Maildir: No such file or directory: No such file or directory [date] colinux courierlocal: id=,,,from=[EMAIL PROTECTED],addr=[EMAIL PROTECTED], status: deferred did you create the maildir with maildirmake ~/Maildir as the user upayavira ? showing in /var/log/syslog Any ideas what is going on here? I can give more details, but I'm not really sure what to share. Thanks in advance. Upayavira --- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_id=5047alloc_id=10808op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Courier-Imapd does not find Maildir
[EMAIL PROTECTED] wrote: Hi, I'm new to mail-servers but with the intention to learn I emerged (Gentoo) the courier-suite including the mta and imapd. Now I stumbled into the following error: -- Aug 16 12:32:22 athen099 imapd: authdaemon: ACCEPT, username [EMAIL PROTECTED] Aug 16 12:32:22 athen099 imapd: chdir .maildir: No such file or directory -- I use quica and therefore the mail should be stored like this: can you show that users record in the database and the complete path and permissions to that users Maildir --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Uniform logfile format; Generic logging interface
Michael Einem wrote: does anyone object to coming up with a standard way to format log messages? Yes, one could use awstats then to evaluate them. But, speaking of this, a question comes to mind that I was thinking about for months now but had more urgent problems. On my system courier (out of the .deb box) logs the same data into /var/log/syslog, mail.log, mail.info which (together with maildrop, spamassasssin ans fetchmail) renders hundreds of megabites of (triplicate) log data. My question: Is it possible to tell courier to log say popd data into /var/log/pop3.log imap4 data respectively to /var/log/imap4.log smtp data to smtp.log etc... without putting everything together into 3 different files. Or is it not intended to be that way and I am doing something wrong? from my syslogd.conf *.*;auth,authpriv.none;\ mail.none;cron.none -/var/log/syslog mail.* -/var/log/mail.log Also I would be grateful for a hint of where to find docs on U*X logging so that I can understand how this works. man syslog.conf or man syslogd or something similar thanks, Maichel. --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] RE: SMTP authentication on a per hosted domain basis
cant you just setup an ip address that only accepts connections from the barracuda on port 25, rejects all others and doesn't require auth? Original Message From: Keith WillisTo: [EMAIL PROTECTED]Sent: Wednesday, August 11, 2004 10:12 PMSubject: [courier-users] RE: SMTP authentication on a per hosted domainbasis Thanks for the answer, and I understand your point, but I think I wasn't clear on what I was looking for. Let me provide an example. I currently host about 30 domains. Most of the domains use SMTP authentication for relaying, and some have IPs in the smtpaccess file. What I would like to do is that if someone tries to send email to domain xyz.com courier rejects the email unless they use authentication. However, domain ABC.com does not require authentication so any email directed to it could come in normally. The reason for this is somewhat complex. We have a Barracuda SPAM/virus firewall appliance (we are resellers for those of you reading this - shameless plug). In essence, it is our only MX record for many of the domains. For these domains, I want to require the email to originate from the Barracuda firewall (it does support SMTP authentication for delivery). For the domains that do not use the Barracuda, they need to accept email normally. Also, users that are sending mail from the Internet with dynamic IP addresses need to be able to relay to courier with SMTP authentication so I cannot simply block port 25 on the mail server IP. Some SPAMMERS bypass the Barracuda and send directly to the mail server nullifying the value of the Barracuda in many cases. My thinking is that if I could require SMTP authentication for domains, only users that are authenticated could send email to certain domains. For example, if user [EMAIL PROTECTED] attempts to relay, he would be authenticated. If email from the Internet is destined for xyz.com, it would have to hit the Barracuda and be filtered before arriving at xyz.com (still delivered with SMTP authentication). Mail to xyz.com that is not authenticated will not deliver. However, if abc.com does not pay for the Barracuda service, I want mail to deliver normally to them whether we use SMTP authentication for relaying or not. Does this make sense? Perhaps there is a way to do this with maildrop or some other scripting means??? - Keith Willis, President Talon Computer Consulting, Inc. http://www.taloncc.com *Developers of phpCourier: http://phpcourier.sourceforge.net Open-Source (free) Fully functional account administration system for courier-MTA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Varshavchik Sent: Wednesday, August 11, 2004 7:37 PM To: [EMAIL PROTECTED] Subject: [courier-users] Re: SMTP Authentication by Domain Keith Willis writes: « HTML content follows » Greetings!Does anyone have any idea how to setup SMTP authentication on a per hosted domain basis? For example, I want certain domains to require SMTP authentication while others do not. Is there a way to do this in courier?? There is no telepathic way for a server to determine with 100% certainty what domain the connecting client belongs to. On the Internet, nobody knows that you're a dog. Anyone can try connecting to any server, and pretend to be anyone else. Thus, taking it for granted that something like this could be done, all that someone has to do is to pretend that he belongs to one of the special domains that do not require authentication, and that's it. Authenticated SMTP is used only for granting mail relaying privileges. In this context, the actual domain is irrelevant. Either the connecting IP address is defined in your smtpaccess file as one that has relaying privileges, or the connecting client must provide a valid userid and password, in order to receive relaying privileges.
Re: [courier-users] Re: forged mail message issue
Stephen Reese wrote: how do you that the reverse dns is off, I checked all my zone file and nothing mentions neocipher.net, that why I assumed courier was the issue (~)# nslookup -sil 66.35.133.90 ... Non-authoritative answer: 90.133.35.66.in-addr.arpa name = www.neocipher.net. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Varshavchik Sent: Monday, August 09, 2004 6:48 PM To: [EMAIL PROTECTED] Subject: [courier-users] Re: forged mail message issue Stephen Reese writes: I am getting the following error when attemting to send an email. The original message was received at Sun, 8 Aug 2004 13:49:55 -0400 (EDT) from www.neocipher.net [66.35.133.90] (may be forged) - The following addresses had permanent delivery errors - [EMAIL PROTECTED] This is a notice message from sendmail, not Courier. I used to host the domain neocipher.net but no longer do, why would it look as mail was coming from neocipher.net instead of prcdigital.com? Because the reverse DNS for 66.35.133.90 is www.neocipher.net. --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Add Users
Original Message From: Norm YatesTo: [EMAIL PROTECTED]Sent: Monday, August 09, 2004 3:03 PMSubject: [courier-users] Add Users Okay, Im not really expecting an answer since you are a laconic group, but here is my next question. How do you add users? I *assume* you do this by adding users to ldap or mysql? IF this is the case what frontend do you like for this? Ive never used either as I have always just created linux accounts on the box with our sendmail / pop system and authenticated with the passwd file. Never had a reason to use Mysql or LDap. take a look at quica http://quica.sourceforge.net In fact what database do you use and why? LDAP / MYSQL ?
Re: [courier-users] imap not finding new mail
Comrade Burnout wrote: i just set up a new mailserver. delivery seems to be working just fine. i can see that there are new messages waiting to be read (by doing an `ls` in a user maildir: /opt/usermail/domains/web.com/burnout/new shows me about 20 messages, so i know they're there. my IMAP server isn't seeing these new messages. i can access it from 2 clients, a 'normal' mailread (Moz mail, in this case) or via the web (i have squirrelmail installed). I assume you are using courier-imap? neither of these methods shows the new messages. i did copy old messages over to the new machine, so i'm starting to think that something is missing/ didn't get copied over correctly. any suggestions? permissions? --- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Outlook 2003 client config for Courier-IMAP
Bill Mounsey wrote: Here is an error I am getting when I setup my Outlook 2003 client for my IMAP server... this is an error from sending mail (your smtp server) Your message did not reach some or all of the intended recipients. Subject: test Sent: 7/9/2004 6:28 PM The following recipient(s) could not be reached: '[EMAIL PROTECTED](dot)com' on 7/9/2004 6:28 PM 553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1) [(dot) is actually .] I have read in a FAQ that mentioned that this can be avoided by putting all users IP addresses into the rcpthosts to prevent this error... But I was thinking there has to be an easier way of doing this other than becoming and open relay... consult your qmail documentation Please help... Thanks wm --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] authpostgresql problem
Gabriele Alberti wrote: Well, $ cat /etc/courier/authpgsqlrc |grep -v '^#\|^$' PGSQL_HOST localhost PGSQL_PORT 5432 PGSQL_USERNAME myuser PGSQL_PASSWORD mypass PGSQL_DATABASE posta PGSQL_USER_TABLEmxaliases PGSQL_CLEAR_PWFIELD password PGSQL_UID_FIELD uid PGSQL_GID_FIELD gid PGSQL_LOGIN_FIELD address PGSQL_HOME_FIELDhome PGSQL_MAILDIR_FIELD directory PGSQL_WHERE_CLAUSE enabled='true' ##NAME: PGSQL_CRYPT_PWFIELD:0 # # Either PGSQL_CRYPT_PWFIELD or PGSQL_CLEAR_PWFIELD must be defined. Both # are OK too. crypted passwords go into PGSQL_CRYPT_PWFIELD, cleartext # passwords go into PGSQL_CLEAR_PWFIELD. Cleartext passwords allow # CRAM-MD5 authentication to be implemented. PGSQL_CRYPT_PWFIELDcrypt A row from my database at the moment is meaningless, as authdaemon is not able to log in. Thanks again.. Gabriel Yahoo! Companion - Scarica gratis la toolbar di Ricerca di Yahoo! http://companion.yahoo.it --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] (no subject)
Gabriele Alberti wrote: Hello, I'm trying to configure my courier authdaemon to access users data on a postgresql database, but i'm getting mad with no success. I'm using the courier backports version in a debian woody, and my configuration is postres accepting local connections (md5 auth) and authdaemon seems to be aware of this, but the problem occurs when it tries to connect to the db: sniffing on lo i get this: I am using the same packages with a working postgres+crypt so I think you have something misconfigured. 13:40:20.680559 localhost.41160 localhost.postgres: P 593:601(8) ack 11 win 32767 nop,nop,timestamp 458174358 458174358 (DF) 0x 4500 003c 3e24 4000 4006 fe95 7f00 0001 E..[EMAIL PROTECTED]@... 0x0010 7f00 0001 a0c8 1538 b33b 13da b3c7 7272 ...8.;rr 0x0020 8018 7fff 1d24 0101 080a 1b4f 2f96 .$...O/. 0x0030 1b4f 2f96 0008 6d64 3500 .O/.md5. As you can see, it seems that authdaemon is not sending the password, as in a normal connection with psql (same user ecc.) you can see at the end something like md5PASSWORD_MD5_HASH passing through the net. Any hint? It's like authdaemon is not able to send the hashed password. If I try in non-hashed mode, i see the clear password passing, so it should work..but before switching to non-md5... this all means nothing with your config, show us a row from your database, and the settings from your authpgsqlrc Thanks in advance, Gabriel --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Courier error message meaning?
according to the info you posted [EMAIL PROTECTED]: mx2.stlawu.edu [199.0.76.10]: RCPT TO:[EMAIL PROTECTED] 450 Client host rejected: cannot find your hostname, [208.31.125.250] the remote server mx2.stlawu.edu apparently running postfix cannot resolve your hostname from your ip address 208.31.125.250 and it has chosen not to deliver mail from ip addresses that it cannot look up. Since it returned a temporay error (450) it stays in your mail queue where your mail server attempts to deliver for the default time of 1 week, at which point it gives up and becomes undeliverable. Original Message From: Michael WeilTo: [EMAIL PROTECTED]Sent: Tuesday, June 29, 2004 4:07 PMSubject: [courier-users] Courier error message meaning? With one potential recipient of mail from a local user, we consistently get error messages and returned mail. To the best of my knowledge, the recipient gets all mail from other sources and we get no returned mail from other sources. This last email reject took 7 days to become "undeliverable". Any ideas? UNDELIVERABLE MAIL Your message to the following recipients cannot be delivered: [EMAIL PROTECTED]: mx2.stlawu.edu [199.0.76.10]: RCPT TO:[EMAIL PROTECTED] 450 Client host rejected: cannot find your hostname, [208.31.125.250]
Re: [courier-users] How to create a mai account
Dinosoft Italia wrote: How can i create an email account in courier that is not associated with any linux user ? depends on what you use for your auth method I have to create a MAIL SERVER and i cannot create every user for every mailboxes... ok, not a problem you probably want to read on how to do virtual users and authentication modules http://www.courier-mta.org/install.html#authlib i try maildirmake /mail/user1 and it works but when i try to send or receive mail for this user, Courier gives me : access denied to : /mail/user1 Theese directories : /mail/user1/ /cur /new /tmp are all owned by daemon Any helps ??? how did you setup user1? what is user1's uid/gid? -- Dinosoft Italia http://www.dinosoft.it Tel. +39 0187 1873615 --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Re: esmtproutes and A/MX records
Bowie Bailey wrote: From: Sam Varshavchik [mailto:[EMAIL PROTECTED] Bowie Bailey writes: I need to send my outbound email to mail.bellsouth.net, however there are also MX records for this machine which point to machines that will not relay for me. Is there any way to specify to esmptroutes to use only the A records? I hardcoded one of the IP addresses in the file and it works fine, but I don't like that solution because it's going to break if they change the IP addresses of their mail servers or remove the one I'm using. These are the DNS responses I get: mail.bellsouth.net. 6617 IN MX 0 mx00.mail.bellsouth.net. mail.bellsouth.net. 6617 IN MX 0 mx01.mail.bellsouth.net. mail.bellsouth.net. 3487 IN A205.152.59.17 mail.bellsouth.net. 3487 IN A205.152.59.16 mx00.mail.bellsouth.net. 6617 IN A205.152.59.32 mx01.mail.bellsouth.net. 6617 IN A205.152.59.33 You can explicitly specify 'mx00.mail.bellsouth.net' in esmtproutes. Yes, but that won't work because mx00 and mx01 will not relay mail for me. I need to send the mail to 'mail.bellsouth.net'. This means it has to get to either 205.152.59.16 or 205.152.59.17. Is there any way to do this without hardcoding one of those two IPs? wouldn't it just be easier to complain to bellsouth that its mail configuration is broken? how do you normally use them if they can't send mail? I don't think this would just be limited to a problem with courier. Bowie --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] How to create a mai account
Dinosoft Italia wrote: im' using mysqlauth and i have no problem to authenticate users...but i have to set all directories rewritable to all ! chmod a+rw /mail/user1 Where Can i find tutorial how to create virtual users ? You shouldn't make your mail writeable to all, as long as your uid/gid match whatever you have in your record in mysql everything works with proper permissions. I didn't even think courier (or is it maildrop) would deliver mail to a a+rw directory. The process is however you want to make it, but its pretty much create a record of a user, create the users home directory and Maildir with proper permissions. There are several admin style tools to automate this process, or you manage your own. quica http://quica.sourceforge.net/ is a good example of one. Il lun, 2004-06-28 alle 16:29, Tim Hunter ha scritto: Dinosoft Italia wrote: How can i create an email account in courier that is not associated with any linux user ? depends on what you use for your auth method I have to create a MAIL SERVER and i cannot create every user for every mailboxes... ok, not a problem you probably want to read on how to do virtual users and authentication modules http://www.courier-mta.org/install.html#authlib i try maildirmake /mail/user1 and it works but when i try to send or receive mail for this user, Courier gives me : access denied to : /mail/user1 Theese directories : /mail/user1/ /cur /new /tmp are all owned by daemon Any helps ??? how did you setup user1? what is user1's uid/gid? -- Dinosoft Italia http://www.dinosoft.it Tel. +39 0187 1873615 --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Courier won't start... Permision denied
[EMAIL PROTECTED] wrote: I have been using courier for about a year now and have been very satisfied with it. I wanted to use MYSQL for authentication but found that the MYSQL module was not installed originaly. I got the latest version of courier and recompiled it with MYSQL enabled then ran make upgrade Everything seemed to be OK but courier wouldn't start. Here is a section of my log file.. Jun 28 10:46:34 mail courierd: Loading STATIC transport module libraries. Jun 28 10:46:34 mail courierd: Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Installing [0/0] Jun 28 10:46:34 mail courierd: Installing uucp Jun 28 10:46:34 mail courierd: Installed: module.uucp - Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Installing local Jun 28 10:46:34 mail courierd: Installed: module.local - Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Installing fax Jun 28 10:46:34 mail courierd: Installed: module.fax - Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Installing esmtp Jun 28 10:46:34 mail courierd: Installed: module.esmtp - Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Installing dsn Jun 28 10:46:34 mail courierd: Installed: module.dsn - Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Initializing uucp Jun 28 10:46:34 mail courierd: Initializing local Jun 28 10:46:34 mail courierd: Initializing fax Jun 28 10:46:34 mail courierd: Initializing esmtp Jun 28 10:46:34 mail courierd: Initializing dsn Jun 28 10:46:34 mail courierd: Started ./courieruucp, pid=3292, maxdels=4, maxhost=4, maxrcpt=16 Jun 28 10:46:34 mail courierd: Started ./courierlocal, pid=3293, maxdels=10, maxhost=4, maxrcpt=1 Jun 28 10:46:34 mail courierd: Started ./courierfax, pid=3294, maxdels=1, maxhost=1, maxrcpt=1 Jun 28 10:46:34 mail courierd: Started ./courieresmtp, pid=3295, maxdels=40, maxhost=4, maxrcpt=100 Jun 28 10:46:34 mail courierd: Started ./courierdsn, pid=3296, maxdels=4, maxhost=1, maxrcpt=1 Jun 28 10:46:34 mail courierd: queuelo=200, queuehi=400 Jun 28 10:46:34 mail courierd: Purging /usr/lib/courier/var/msgq Jun 28 10:46:34 mail courierd: Purging /usr/lib/courier/var/msgs Jun 28 10:46:34 mail courierd: Permission denied Jun 28 10:46:34 mail courierd: ABNORMAL TERMINATION, exit status: 1 Jun 28 10:46:34 mail courierd: Will restart in 60 seconds. you must have changed the user you compiled courier as, make sure its the same user (uid/gid) as the first time you installed If anyone has any ideas please let me know... This is a fairly critical email server and I've spent far too long trying to figure this out. Thanks Todd Humphries --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Courier won't start... Permision denied
[EMAIL PROTECTED] wrote: Quoting David Gomillion [EMAIL PROTECTED]: I did install it as default and everything appers to be in /usr/lib/courier, however there is no spool directory. I tried finding the directory via locate spool | grep courier with no luck. If you installed it as default, it is possible that you should be looking in /usr/lib/courier/spool instead of /var/spool/courier. I have never done a make upgrade, as I build my RPMs. Since switching to RPMs, all of the files go where you'd expect them, or configuration files are in /etc/courier, binaries in /usr/bin, spool files in /var/spool/courier, and so on. search for the msgq and check from there msgq/../tmp/ at least thats how mine is organized (from debs) By the way, how is the weather in Utah? I've been missing it ever since I graduated from the Y... The weather is great right now. Upper 80's during the day, cool at night. Perfect for doing anything outdoors. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, June 28, 2004 12:21 PM To: [EMAIL PROTECTED] Subject: Re: [courier-users] Courier won't start... Permision denied Quoting Tim Hunter [EMAIL PROTECTED]: [EMAIL PROTECTED] wrote: I have been using courier for about a year now and have been very satisfied with it. I wanted to use MYSQL for authentication but found that the MYSQL module was not installed originaly. I got the latest version of courier and recompiled it with MYSQL enabled then ran make upgrade Everything seemed to be OK but courier wouldn't start. Here is a section of my log file.. Jun 28 10:46:34 mail courierd: Loading STATIC transport module libraries. Jun 28 10:46:34 mail courierd: Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Installing [0/0] Jun 28 10:46:34 mail courierd: Installing uucp Jun 28 10:46:34 mail courierd: Installed: module.uucp - Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Installing local Jun 28 10:46:34 mail courierd: Installed: module.local - Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Installing fax Jun 28 10:46:34 mail courierd: Installed: module.fax - Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Installing esmtp Jun 28 10:46:34 mail courierd: Installed: module.esmtp - Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Installing dsn Jun 28 10:46:34 mail courierd: Installed: module.dsn - Courier 0.45.6.20040618 Copyright 1999-2004 Double Precision, Inc. Jun 28 10:46:34 mail courierd: Initializing uucp Jun 28 10:46:34 mail courierd: Initializing local Jun 28 10:46:34 mail courierd: Initializing fax Jun 28 10:46:34 mail courierd: Initializing esmtp Jun 28 10:46:34 mail courierd: Initializing dsn Jun 28 10:46:34 mail courierd: Started ./courieruucp, pid=3292, maxdels=4, maxhost=4, maxrcpt=16 Jun 28 10:46:34 mail courierd: Started ./courierlocal, pid=3293, maxdels=10, maxhost=4, maxrcpt=1 Jun 28 10:46:34 mail courierd: Started ./courierfax, pid=3294, maxdels=1, maxhost=1, maxrcpt=1 Jun 28 10:46:34 mail courierd: Started ./courieresmtp, pid=3295, maxdels=40, maxhost=4, maxrcpt=100 Jun 28 10:46:34 mail courierd: Started ./courierdsn, pid=3296, maxdels=4, maxhost=1, maxrcpt=1 Jun 28 10:46:34 mail courierd: queuelo=200, queuehi=400 Jun 28 10:46:34 mail courierd: Purging /usr/lib/courier/var/msgq Jun 28 10:46:34 mail courierd: Purging /usr/lib/courier/var/msgs Jun 28 10:46:34 mail courierd: Permission denied Jun 28 10:46:34 mail courierd: ABNORMAL TERMINATION, exit status: 1 Jun 28 10:46:34 mail courierd: Will restart in 60 seconds. you must have changed the user you compiled courier as, make sure its the same user (uid/gid) as the first time you installed I'm pretty sure that I compiled courier as the same user. The funny thing is that I did this last Friday and I could send/recieve mail up until this morning at about 10:00... I don't know what changed. I did read another posting that said a lock file had the wrong permisions on it in /var/spool/courier/tmp I tried looking there but that directory doesn't exist. Do you know which config file that tmp directory is specified? I ran courier-config and it is running as daemon:courier If anyone has any ideas please let me know... This is a fairly critical email server and I've spent far too long trying to figure this out. Thanks Todd Humphries --- This SF.Net email sponsored by Black Hat Briefings Training. Attend Black Hat Briefings Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
Re: [courier-users] Re: my pop3 setup won't work...
Christian Schnobrich wrote: On Wed, 2004-06-16 at 01:08, Sam Varshavchik wrote: [...] Make sure that you have used the userdb script to create this records, and the password field is generated by userdbpw. Hmm. An what now? The only reason I can rule out is a typo in the password, as I've double- and triple-checked that one. You can do triple-DES or MD5-hash encryption by hand? Very impressive. Wait a little... do they need to be encrypted? Yes, they need to be encrypted in the userdb file. take a look at http://www.courier-mta.org/FAQ.html and search for Using USERDB for a quick guide to setting up a userdb file In my userdb file, I have just the plaintext password, the very same string I send as 'pass string' when trying to log into my pop3 box. Or can it be that I use the wrong username? I try to log in using just the username. Again, my failed attempt to connect and the corresponding line from userdb: pop3schnobs uid=1002|gid=1002|home=/home/vmail|mail=/home/vmail/pop3schnobs|pop3pw=secre t [EMAIL PROTECTED]:~$ telnet zwerg 110 Trying 192.168.30.1... Connected to zwerg. Escape character is '^]'. +OK Hello there. user pop3schnobs +OK Password required. pass secret -ERR Login failed. Should user be more, like [EMAIL PROTECTED] or even [EMAIL PROTECTED] Should pass not be sent as plaintext, but encoded/encrypted in any way? password on pop is sent plaintext cu, Schnobs --- This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Courier Maildir intead of /new
Dinosoft Italia wrote: Ok, but when i create box for mario i type maildirmake /mail/mario (/mail is my directory for all boxes) and it creates /mario /cur /tmp /new what is wrong ? how can i set up the dir correctly ? try maildirmake /mail/mario/Maildir also make sure you run this as the proper user:group or you change to proper user:group ownership Thanks ! Il mer, 2004-06-16 alle 12:21, Anand Buddhdev ha scritto: On Wed, Jun 16, 2004 at 12:21:02PM +0200, Dinosoft Italia wrote: Every user has its Courier Mail dir with /new /tmp /cur but courier creates Maildir file too inside the email dir !!! Here is the example If user [EMAIL PROTECTED] receive an email so the maildir tree becomes ... /mario /new (empty) /tmp (empty) /cur (empty) Maildir (with all emails appended...) Your setup is wrong. It should be like this: /mario /Maildir /new /cur /tmp Then, courier will create new email message files in mario/Maildir/new Il mer, 2004-06-16 alle 11:56, Anand Buddhdev ha scritto: On Wed, Jun 16, 2004 at 11:56:41AM +0200, Dinosoft Italia wrote: Good morning, we have installed Courier ESMTP /POP3D on a Linux Server running Fedora This is the problem : when we send an email to this server courier append the email to Maildir file in the directory of the owner leaving /new dir empty,but we want courier to write a single file for any email and put it in the /new directory of the owner and no append it in Maildir file What are the right configuration ? Thanks Gabriele You must make sure that a Maildir directory (with the new, cur and tmp) subdirectories exists in the user's home directory before courier delivers any email. Otherwise courier will create a _file_ called Maildir, which you don't want. The best thing to do is to create a Maildir in the /etc/skel directory so that each new user automatically gets a Maildir. -- Dinosoft Italia http://www.dinosoft.it Tel. +39 0187 1873615 --- This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] user login problem
Frederic Medery wrote: Did you already see this error : 21:Jun 16 11:45:00 server imapd-ssl: chdir /home/user: Permission denied ? perm on user folder is ok can you prove your permissions are ok? show us the full permissions on this dir and every directory above it and show us the uid and gid for the user logging in thanks ! --- This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] How to enable postgresql auth with encrypted passwords?
mail wrote: Hi, I have courier setup to authenticate using the postgresql module and everything works fine ... BUT encrypted passwords. How do I have to generate the encrypted passwords? I did generate them with a trigger like new.crypted = crypt( new.passwd, fX ) Postgres does not have a crypt function use your operating systems crypt function as described in the docs However, any attempt to use encrypted authentication fails ... Thanks Chris --- This SF.Net email is sponsored by the new InstallShield X. From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] testmxlookup soft error
Thorne Lawler wrote: Hi all! I have a system (which hosts its own DNS) on which courier seems to be throwing a lot of DNS errors when attempting to deliver to the local domain. When I try to use the courier testmxlookup tool to test the local domain, it reports a 'soft error'. This is also the case when I try to look up any other domain I can think of, including domains that definitely have a viable mx record, like 'google.com'. If I use nslookup -q=mx mydomain.com then the local domain MX record looks fine, and name resolution is working perfectly for all the other systems on the machine. How can I debug this? What could courier be asking for that isn't available? Since you haven't given us any information about your system, I will make the assumption you are using FreeBSD and you compiled courier with ipv6 support which is known to have problems alternatively you might also have nameserver 0.0.0.0 in /etc/resolv.conf since you said you are running it locally, try to change this to an actual ip address if the above is incorrect or does not help you, please post enough information for us to help you this time --- This SF.Net email is sponsored by the new InstallShield X. From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] courier with LDAP-account
Sander Holthaus - Orange XL wrote: I'm trying to setup a maillinglist. The maillinglist has it's own virtual account with a LDAP-back-end. The address for the list is [EMAIL PROTECTED] Sending a message to [EMAIL PROTECTED] works, however, sending to [EMAIL PROTECTED] doesn't, which ends up at my catch-all account. Of course, I can add all [EMAIL PROTECTED] to the LDAP-directory, but this doesn't solve the issue completly because (un)subscribe-mails in the form of [EMAIL PROTECTED] are still unuseable. How do I set up Couriermlm using an LDAP-backend? Is there a specific reason why courier doesn't search for a mail-account [EMAIL PROTECTED] when it receives a mail to [EMAIL PROTECTED]? sounds like you are missing a .courier-default file in the home of your list user it should contain information such as | /usr/bin/couriermlm ctlmsg pathtolist/ Kind Regards, Sander Holthaus --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149alloc_id=8166op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149alloc_id=8166op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Attachments
Original Message From: Shane GeganTo: [EMAIL PROTECTED]Sent: Wednesday, May 26, 2004 12:01 PMSubject: [courier-users] Attachments Hello There, I am having issues sending messages from the outlook client that have attachments regular messages send out fine. Any ideas? any logs? any errors? we really need something to go on here. Thanks Shane
Re: [courier-users] Change max message size limit
gerd kranz wrote: Hello There, i have installed the latest version of courier-mta on an debian system and cannot send messages over 10 MB of attachments. i need an howto to change more than 10 mb per mail can anybody help me? http://www.google.com/search?sourceid=navclientie=UTF-8oe=UTF-8q=site%3Acourier%2Dmta%2Eorg+sizelimit --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149alloc_id=8166op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Error-Message with /usr/sbin/courierfilter
Hello, I have installed a new Workatation based on Debian GNU/Linux WOODY and tried to install courier-webmin (it was ok) and courier-mta-ssl __ ( apt-get install courier-mta-ssl ) ___ / | Setting up courier-ssl (0.45.4-0.backports.0rg.1) | | Setting up courier-mta (0.45.4-0.backports.0rg.1) | Starting courier mail server: done | Starting courier mail filter:Unable to reserve file descriptor 3. | invoke-rc.d: initscript courier-mta, action start failed. | dpkg: error processing courier-mta (--configure) | subprocess post-installation script returned error exit status 255 | dpkg: dependency problems prevent configuration of courier-mta-ssl: | courier-mta-ssl depends on courier-mta; however: |Package courier-mta is not configured yet. | dpkg: error processing courier-mta-ssl (--configure) | dependency problems - leaving unconfigured | Errors were encountered while processing: | courier-mta | courier-mta-ssl | E: Sub-process /usr/bin/dpkg returned an error code (1) \__ OK, now I know it is /usr/sbin/courierfilter which produce the error Unable to reserve file descriptor 3. How can I solv this problem ? this is a problem with the package maintainer that you got your package from, since it is not from source you would need to contact that person and find out why its not working with your system Thanks an nice week Michelle -- Linux-User #280138 with the Linux Counter, http://counter.li.org/ Michelle Konzack Apt. 917 ICQ #328449886 50, rue de Soultz MSM LinuxMichi 0033/3/8845235667100 Strasbourg/France IRC #Debian (irc.icq.com) --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149alloc_id=8166op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
OFFTOPIC Re: [courier-users] RE: Error-Message with /usr/sbin/courierfilter
Gordon Messmer wrote: Martijn Lievaart wrote: Rumours go around that unstable is much more stable than testing. :-) That's to be expected. testing is the first level of testing. Packages get moved to unstable after they prove that they're working in the testing area. That's wrong. Unstable is always unstable, then as they work to make the next release it moves into testing. As for the original problem, I have testing on a few of my servers running courier and I have never had a problem. I have had strange problems with some backports.org packages however. As for this topic can we close it or take it off list? We are horribly off topic --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149alloc_id=8166op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Re: IMAP and POP authentication
Andre Correa wrote: Tks for the info Sam, but I couldn't find any reference in the source neither on Google about: MYSQL_AUXOPTIONS. Are you sure this is the right options? http://www.courier-mta.org/install.html#options I've searched sources and found at authlib/README.authmysql.myownquery a TODO for a new query called MYSQL_PRESELECT_CLAUSE that looks interresting for my needs, but it is not implemented yet. Anybody see other options or ways to go!? tks for any information Andre Sam Varshavchik wrote: Andre Correa writes: This is because I have to permit some users to have access to IMAP and POP and others just to POP. I've created a new field in the database but I don't know how to make the two daemons use diferent SQL queries. See the MYSQL_AUXOPTIONS setting in the authmysqlrc configuration file. See INSTALL for additional information on how to use this option. --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149alloc_id=8166op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] aliasdir/Maildir mbox file.
I wasnt paying attention to the first part of this thread but do you have anything setup like what is listed as an alias at a hosted domain http://www.courier-mta.org/makehosteddomains.html ? Dan wrote: So does anyone have any idea why courier is delivering to this file for users that don't exist? Dan - Original Message - From: Dan [EMAIL PROTECTED] To: Courier Users List [EMAIL PROTECTED] Sent: Sunday, May 16, 2004 5:03 AM Subject: Re: [courier-users] aliasdir/Maildir mbox file. # ls -la /usr/lib/courier/etc/aliasdir/ total 12 drwxr-xr-x2 courier courier 4096 May 15 10:44 . drwxr-xr-x 13 courier courier 4096 May 15 10:41 .. -rw---1 courier courier 2895 May 15 10:44 Maildir # Alas, no hidden files... Dan - Original Message - From: Jeff Jansen [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, May 16, 2004 1:05 AM Subject: Re: [courier-users] aliasdir/Maildir mbox file. On Saturday 15 May 2004 17:59, Dan wrote: May 15 10:44:36 hostname courierd: started,id=0006E299.40A65704.0861,from=[EMAIL PROTECTED], module=local, [EMAIL PROTECTED] /usr/lib/courier/etc/aliasdir!!,addr=alias Well it sure looks to me like courier *thinks* you have an alias defined. Humor me for a moment please and make sure that ls -a /usr/lib/courier/etc/aliasdir show nothing in that directory. (.courier files are hidden so you'll need the '-a' switch. That has tripped me up more than once. :-) Jeff Jansen --- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562alloc_id=6184op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] How to use an external server to deliver mail
echo :some.other.server.com /etc/courier/esmtproutes [EMAIL PROTECTED] wrote: I am new to courier. Can someone answer how I can tell courier to send all outgoing messages to one or more servers for delivering? Thanks --- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562alloc_id=6184op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] sendmail error 450?
Chris Petersen wrote: After a recent courier upgrde to .45.x (I'm running .4 but it started with the .45 series), the commandline sendmail wrapper seems to be working oddly or not at all.. if I type: sendmail [EMAIL PROTECTED] where [EMAIL PROTECTED] and __.__ are of course just @ and . you cannot send a spamtrap email address to a mailing list? makes no sense... I get: 450 Service temporarily unavailable. [EMAIL PROTECTED]: invalid address. 450 Service temporarily unavailable. typically means that it cannot connect to the backend, is this only with the sendmail? are you sure its running the new version? in the right place? everything looks like proper permissions? are you sure that this is the courier sendmail? Did I miss something in the config files when I upgraded? (maybe the rpm overwrote something with defaults at some point?) a quick search on the error brings up auth issues (I have smtp auth enabled, but it used to let localhost send without authenticating) -Chris --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] sendmail error 450?
Chris Petersen wrote: you cannot send a spamtrap email address to a mailing list? makes no sense... Everything runs on my dsl line. Even the connections coming in that get denied will slow down my connection. 450 Service temporarily unavailable. typically means that it cannot connect to the backend, is this only with the sendmail? are you sure its running the new version? in the right place? everything looks like proper permissions? are you sure that this is the courier sendmail? As far as I know, everything is running. After all, I can send this message. Versions are all fine, and the only sendmail on the system that isn't a symlink is /usr/lib/courier/bin/sendmail (rpm makes sure that I don't have any stray old versions laying around) As for permissions, etc. I don't know. But now that you mention it, root seems to be able to run sendmail just fine, but my normal user gets the error. What would this mean? probably the sticky bit on your sendmail is wrong it should look something like this 28 -r-s--x--x1 root daemon 28120 Apr 6 08:42 /usr/sbin/sendmail -Chris --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Re: various errors
Sean Butler wrote: At 10:28 PM 4/6/2004, Malcolm Weir wrote: -Original Message- From: Sean Butler Sent: Tuesday, April 06, 2004 5:59 PM [ Snip ] Is there anywhere to get the detail of what courier-imap is sending the client and why, since there doesn't seem to currently be adequate logging as I have it configured. Gee, good to see folks paying attention, because it's been, what, three days since this question was answered. Courtesy would seem to me to include doing *some* rudimentary research on ones own... I tried to search the forums, but something seems to be wrong. When I check: http://sourceforge.net/mailarchive/forum.php?forum=courier-imap Sourceforge unfortunately has all sorts of issues with its archives try looking at http://www.riverside.org/archive/html/courier-users/ I get: Either your mailing list name was misspelled or your mailing list has not been archived yet. If this list has just been created, please retry in 2-4 hours That is the link available for forum archives from the subscribe page, so I assume it is correct. But it hasn't worked for me since early yesterday morning. Lot's of googling hasn't helped either, unfortunately. I'm not a normal subscriber to the list, as I haven't had any problems in quite some time, so perhaps it's my fault for not paying attention, and if so, I apologize for that. Now, if someone can fix the archives, or point me to a url that has the post Malcolm has referenced, or forward me that email, or give some kind of advice to someone who has now spent many hours on this problem with no luck, that would be great. Thanks, Sean --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Problem with folders inside Inbox
Henrik Lynggaard wrote: Hi I tried to find it by looking in the archives but I didn't find it. Perhaps you (or someone else) could provide a more direct link to the fuller explantion, or perhaps even to a working mozilla/squirrelmail setup. I dont use mozilla, but for squirrelmail you just need to $imap_server_type = 'courier'; in your config.php Somehow Im having trouble comming to terms with all the modern clients I try displays it wrongly (and unlike all other servers I access). Im hoping that there is something that I have overlooked.. best regards henrik Drew Gibson wrote: This is an issue with how the CLIENT chooses to DISPLAY the folders, Courier has little or no control over that. Details of the IMAP specs have been posted in this list and will explain better than I can. regards, Drew Henrik Lynggaard wrote: Hi I have just tried again using a fresh account, but I still get the problem This time I manually set the namespace in my configuration: imap server directory: empty Show only subscribed folders: no Server support folder that contain folders and messages: yes Max server connections: 5 Personal namespace: INBOX. public (shared) namespace: shared. Other users namespace: empty Best regards Henrik Henrik Lynggaard wrote: Hi I know it properly comes up quite often, but haven't been able to find the right solution yet. My problem is that All my folders (incl sent,draft and trash) appears inside the Incbox instead of outside it. Also manually created folders can only be placed inside the inbox. According the the FAQ entry (http://www.inter7.com/courierimap/FAQ.html#namespace) it should be a client problem, but I have not been able to find the right configuration yet. Looking at the readme http://www.inter7.com/courierimap/README.imap.html did not help My Setup * Gentoo Linux with the following packages: - OpenLdap 2.1.26 - Postfix 2.0.19 - Procmail 3.22 - courrier-imap 3.0.2 - apache 2.0.49 - squirrelmail 1.4.2 - jamm 0.9.6 * I setup the mail system according to the howto provided by jamm: http://jamm.sourceforge.net/howto/single-html/mailserver.html * I have made to special customizations afterwards * I connect to the server using courier-imapd-ssl for my regulart client, and my webmail connect using the normal courier-imapd * I'm having the folder problem both in mozilla 1.6, and in the squirrelmail webclient. In mozilla I have tried the following namespace settings: map server directory: empty Show only subscribed folders: yes Server support folder that contain folders and messages: yes Max server connections: 5 Personal namespace: empty public (shared) namespace: empty Other users namespace: empty Allow server to override these namespaces : yes I have also tried giving it Inbox. and shared. as namespace. (will try again tonight in a fresh account setup) In squirrelmail I haven't touched the defaults. (if you need more information, please let me know and I will try and get it) Best regards Henrik Lynggaard --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Whats new in 3.0.x ?
Paul Reilly wrote: Whats the main differences between courier-IMAP-2.2.1 and 3.0.2 ? Is it worth upgrading ? Paul Best place to start would be the changelog which is linked from the sourceforge site for courier http://cvs.sourceforge.net/viewcvs.py/*checkout*/courier/courier/imap/imap/ChangeLog?content-type=text/plainrev=courier-imap-latest --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] esmtp not working
check for any non working blacklists or a broken router in the way john smith wrote: About 4:00 AM this morning esmtp stopped working. Can anyone give me any ideas were to start. Users can login but anyone that tries to send the connection times out. All files seem to start fine and when I tail the syslog I see courieresmtpd, pop3d, and courierd. Everything I have checked looks normal. --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] limit simultaneous delivery threads
Martijn Lievaart wrote: Charles Fry wrote: What I really want is to be able to limit the number of simultaneous delivery threads to one. I don't mind enqueueing messages while waiting for delivery, as in the long-term the server can always keep up with the incoming mail flow. However I would like to prevent more than one message from being processed by maildrop at the same time, as this results in an unnecessary burden on my wimpy server. In modules.local set 'MAXDELS=1' Boy, that was easy! Thank you. I know what happens when that setting is to high :-) Even knowing this, I didn't see anywhere in courierwebadmin to set this. I would now expect it in the Local mail delivery section. Is it somewhere hidden where I am not finding it, or would it be reasonable to add it? I don't use the webadmin, so I cannot comment on that. I did have to use Google to find this, the documentation was no great help here. Contrary to some peoples comments, I find the documentation to be not more than adequate, this is another example. That said, most software documentation is much worse. I find the problem with the documentation is not that the information is not there, but its difficult to find the setting that I need when i dont know where its located. I like to use google to search like this site:www.courier-mta.org delivery queue which should provide some detailed information, Sam could provide a google search like this on the courier-mta.org site if he wants to :) I'm not to sure this should go in the webadmin interface. There are so many knobs to fiddle, either put them all in or just put in the most often used ones. M4 --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] greets, issues
- Original Message - From: Andrew Thomas Zerger [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, March 09, 2004 11:00 AM Subject: [courier-users] greets, issues Hey everyone, nice to meet you, im sorry to just right to my issues but the fact that i was having issues was the whole reason i found this mailing list. whats going on is this: im setting up a Courier-IMAP server (yay!) and im not clear on how to tell courier where to find users mailboxes.. etc/imapd.config didnt have a default maildir or anything that resembled one, so i added my own (MAILDIR=/home/$USER) .. it didnt work, maillog says (imapdlogin: exec: file not found) .. so what im looking for is the correct syntax and the right file to edit .. id appreciate a hint, thanks! this is defined by your authentication method, unless you use system authentication which it would be $HOME/Maildir/ if you use a more flexible backend, such as sql or ldap you can specify the field used for the maildir and set it to just about any directory you want me,akazergmoney --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] debian packages - what's the difference between maildrop and courier-maildrop
Kevin Bailey wrote: so i take it that courier can deliver to maildirs natively - i.e. without using maildrop? yes, although courier-mta itself is never built without maildrop support, this was a chioce of the package maintainer thanks for your help, kev bailey On Monday 01 March 2004 8:10 pm, Jeff Jansen wrote: On Monday 01 March 2004 10:11, Kevin Bailey wrote: Package courier-maildrop * stable (mail): Mail delivery agent with filtering abilities 0.37.3-2.3: alpha arm hppa i386 ia64 m68k mips mipsel powerpc s390 sparc Package maildrop * stable (mail): mail delivery agent with filtering abilities 1.3.7-2: alpha arm hppa i386 ia64 m68k mips mipsel powerpc s390 sparc The debian maintainer will have to confirm this but maildrop 0.37.3 is probably maildrop packaged for use with courier MTA (since it has the full courier-suite's version number) whereas maildrop 1.3.7 is stand-alone maildrop for use with other MTA's. Jeff Jansen --- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id56alloc_id438op,ick ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356alloc_id=3438op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356alloc_id=3438op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] prefix before name
Lean Fuglsang wrote: Hello, I was wondering if it is possible to let all mail to a adress ending with a username come to that user. E.G [EMAIL PROTECTED] would deliver to [EMAIL PROTECTED] The 'from' field should be intact, so the emailclient can figure out who the message was sent to. courier uses a convention such as [EMAIL PROTECTED] with a .courier-default file, courier-mlm is a good example of that. --- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356alloc_id=3438op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Does Courier override MX entries with local settings? If yes, how to change this?
Peter Holm wrote: Hi, does courier override dns mx entries with it´s local settings? I have a situation, where this happens. I would like to change this. courier does not change any dns settings, however if a domain is in hosteddomains or in locals it is treated as such and will attempt to deliver locally, unless overridden with esmtproutes (check details at http://www.courier-mta.org/courier.html ) You seem to have a special case because as you have it configured you are treating domains as locally delivered although they are not, you could possbily put a global esmtproutes entry when the server is in fallback mode and remove it when its working as the master. Server.A is a machine that is configured as a Fallback Mail Server. If the main.mailserver.dom is offline, dns A records change and Server.A will be main.mailserver.tld itself. (Yes, multiple mx records should be sufficient, but we use this fallback for webservers anyway so using it for mailservers was a site-effect...) So Server.A has always a fully functional courier configuration for several domains, including example.com, waiting in hot standby mode for it´s combat order. Now, just for some practical reasons and to not let the machine feel so lonely, I am using this Server.A as the mailserver for some private addresses. So I discovered, if I want to send mail to a friendsdomain.tld, that is configured in esmptacceptmailfor and hosteddomains on the same machine, it will never leave Server.A. Note: dig mx friendsdomain.tld in this case will NOT point with any hostname or ip to Server.A ! So, if I understand things right, courier seems to override infos from mx record with the settings in /etc/courier. Is this a feature? Can this be changed? What did i wrong? If you want to discuss [dis-] advantages of the dns a-record-changing fallback strategy, this should be a seperate thread but nevertheless it would be very interesting to hear your opinions. Thanks for your attention! Have a nice day, Peter --- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id56alloc_id438op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] unable to send mail to external domains
[EMAIL PROTECTED] wrote: Hi all. As to my previous problem about authentication modules, I have since straightened out that problem...Thanks to all who would have replied. However, I have now run into a new problem. As of now, I currently have local mail delivery working smoothly, however when I try to send mail to any other domain besides my own (lava-net.com), I get the following in syslog: Feb 10 18:25:06 2004, queuedelivering=25, inprogress=1 Feb 10 18:20:09 igueths courieresmtp: id=00027E60.40296728.1434,from=[EMAIL PROTECTED],addr=[EMAIL PROTECTED] .net: Connection closed by remote host. Feb 10 18:20:09 igueths courieresmtp: id=00027E60.40296728.1434,from=[EMAIL PROTECTED],addr=[EMAIL PROTECTED] .net,status: deferred Feb 10 18:20:09 igueths courierd: completed,id=00027E60.40296728.1434 comcast closed the connection, not much you can do but sit and wait. could be temporary, could be a silly anti spam measure Why would this be occuring, if theoretically 127.0.0.1 should be able to relay to anywhere? Could the problem be with my esmtproutes? Currently, /usr/lib/courier/etc/esmtproutes looks like this: lava-net.com: [68.37.56.149] as long as you want any mail for lava-net.com to be relayed to 68.37.56.149 thats fine Am I doing something wrong here? Is there something I should be doing that I am currently not? Is esmtproutes not syntactically correct? Thanks! --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] courier imap server start problem
Guntha Aravind babu wrote: hi all, i am trying to run imap server as a normal user.so i configured the defalut port which is 143 to 1200. but when i try to start the server using /home/guntha/courier-imap/libexec/imapd.rc start where /home/guntha/ is my personal account which doesnot have the administration permissions. but when i start the srever using above command i get like command not found . look in the script /home/guntha/courier-imap/libexec/imapd.rc for the line with the error and fix it accordingly, I wouldn't doubt if you have to manually tweak several items in there. when i complied i could able to create the following directories etc - configuration files bin - binaries sbin - superuser binaries libexec - additional binaries man - manual pages share - scripts and data files var - temporary files used by the authdaemond, daemon process (if the authdaemon authentication module is selected). but i dont understand where the problem is. thanks and regards aravind ___ BT Yahoo! Broadband - Free modem offer, sign up online today and save £80 http://btyahoo.yahoo.co.uk --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] courier-mta + spamassassin + authmysql
Alexander Lang wrote: hello list, i have been trying to get spamassassin working with my courier using mysql authentication for a couple of days now. (debian woody, courier v. 0.37.3) all i want is spamassassin to add its spam headers to the mails, filtering should be done by clients only. i found out that changing DEFAULTDELIVERY to somthing like |spamc | maildop should do it, but unfortunately, defaultdelivery is overridden by the mysql authentication module... what to do? remove the values from maildir in your auth module, delivery will default to $HOME/Maildir/ regards alex --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] maildrop under user daemon
Original Message From: [EMAIL PROTECTED]To: [EMAIL PROTECTED]Sent: Friday, January 30, 2004 5:56 PMSubject: [courier-users] maildrop under user daemon Greetings to all! I have been trying to get the courier suite working for the past two weeks with modest results. I did some serious RTFM, googled a lot, read this archives but I am hopelessly stuck and in need of your help. I am using the Debian Woody courier "out of the box" installed with apt-get using virtual users with maildirs autheticated by mysql. After three installations from scratch (Debian and all) I managed to get everything to work except maildrop which is the essential link for spam and virus filtering. Courier now accepts mails and delivers them to the correct maildirs. Only it does not seem to trigger maildrop although in /etc/courier/courierd DEFAULTDELIERY="| /usr/bin/maildrop" is set. No logging or any other sign of life from the /etc/courier/maildroprc file. My first guess is that you have MAIL set in mysql, this will overwrite defaultdelivery If I run maildrop as root from the command line (# cat some_mail_file | maildrop V5) it works like a charm and delivers the mail from some_mail_file into $HOME/maildir/new. But apt-get installs courier under user daemon. So when I "# su - daemon" and try the same I get following error: "maildrop: Invalid home directory permissions - world writable" (which is not true for "$ echo $HOME" gives /usr/sbin and this has following permissions: drwxr-xr-x but who is going to argue with an error message). courier first switches to the uid/gid for the user before it delivers I suspect that courier first tries to deliver using the maildrop pipe and being daemon fails. So it reverts to its internal delivery mechanism and delivers the mail successfully. But then probably I am wrong. I am new to courier, new to mail servers, new to the UNIX paradigma. I don't know how to make apt-get install courier under the user courier or change this setting after installation. Generally I have no idea what else to try. dont Any input would be greatly appreciated. Please help. logs and a sample user would be greatly helpful michael einem.
Re: [courier-users] Re: Restricting flow of mail
Thomas von Hassel wrote: On 28/1-2004, at 0.24, Sam Varshavchik wrote: Thomas von Hassel writes: Ok, we have this setup now Internet --- Filtering server (Running postfix/spamassasin/uvscan/anomy) --- Courier mailserver Is there a way to setup the courier server so it only accepts mail coming from the filtering server, also this must be done on a domain level, not all domains have their mail filtered. You can control where mail goes for a given domain by setting up your DNS MX records correctly. i know that ... the problem is that for instance the Mydoom worm sends itself directly to mail.domain.com bypassing the normal MX and therefor bypassing my flitering system .. /thomas take a look at http://www.courier-mta.org/couriertcpd.html specifically the part labeled ACCESS FILE you can put these changes into smtpaccess which gets rebuilt with http://www.courier-mta.org/makesmtpaccess.html --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Mysql user addition automation
David Berndt wrote: Has anyone written a script or some sort of management software for adding/removing/editing accounts in the mysql authentication tables? Thanks David Berndt Take a look at quica http://quica.sourceforge.net/ --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] help required for installion please
Guntha Aravind babu wrote: hi all, i have been asking questions ,but i could not get any responses. I am trying to install courier imap srever on linux system. i have read the documentation but i have some problems .please can anyone help me. i have downloaded courier imap and i have kept in my university account where a student doesnot have administrative permissions. courier-imap needs to admin rights to bind to the imap port, besides its not designed for end users, its designed for site wide use. I don't think you will have much luck otherwise. to compile and install the server i have followed the rules given in documentation. that is $ ./configure $ make then i did not understand what does $ make check and $make install do. as said in the documentation if installation is successful, then there exists /usr/lib/courier-imap directory. but as i said i dont have permission to write into lib. so i have used the option for configure, that is --prefix= ../imap/ . then i could see some directories in ../imap/ like bin/ etc/ libexec/ man/ sbin/ share/ var/ also the documentation says to use the following command to start server $/usr/lib/courier-imap/libexec/imapd.rc start but i dont have any directory in /usr/lib like courier-imap. but i could able to see the file imap.rc in ../imap/libexec/imapd.rc but if i run the above command ,it says the command not found. can anyone p-lease help me or give me suggestions where i am doing wrong and what exactly i have to do. Thanks and regards aravind --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Weird Double Email with Alias
Noah Silverman wrote: Hi, I've got a strange one. One of our e-mail addresses is aliased to a program. (Our support ticket system) Whenever we send an e-mail to that address, it gets forwarded TWICE to the program. logs are always helpful There is only one entry in the aliases/default file: support: | /usr/Mail/support.sh Does anybody have any clues?? Thanks, -Noah --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] 550 Message MIME complexity exceeds the policy maximum
Anand Buddhdev wrote: On Mon, Jan 19, 2004 at 01:21:22PM +0200, [EMAIL PROTECTED] wrote: Hi all. I have the following message appearing in my logs: 550 Message MIME complexity exceeds the policy maximum. I have not been able to find any reference to a MIME complexity policy anywhere in the docs It's not documented. You have to read the source code to find (and change) the policy. This may help a bit, there was another thread about the code that was needed to change but I cannot find it right now http://www.mail-archive.com/[EMAIL PROTECTED]/msg12929.html --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] postfix, courier, ldap and quotas.
Roland wrote: --On Dienstag, 13. Januar 2004 13:35 +0100 Mauro [EMAIL PROTECTED] wrote: I use linux debian woody with postfix-1.1.11, courier-pop 0.37.3, courier-imap 1.4.3 and ldap to autenticate virtual users. In my ldap database also I have an attribute in which to put quota value. I don't have any idea how to configure quotas. You missed maildrop, no softquotas possible without. Perhaps the courier version that come with debian woody isn't able to use quotas? Its completely out of date, and courier's quota managment had some changes since then. Get the packages from Sarge. You might also take a look at using the packages from http://www.backports.org/ if you want to keep everything else stock woody Roland --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Mail lists+mysql+courier
Jason wrote: Hi. Im trying to use the mail list manager built in to courier .39. I am also using mysql for all courier authenticatin for smtp and pop. I have the mail list created but cannot seem to figure out how to pass the list commands via the email address like the man suggests. Any ideas? make sure you have a .courier | /usr/bin/couriermlm msg list/ and a .courier-default | /usr/bin/couriermlm ctlmsg list/ and a .courier-owner [EMAIL PROTECTED] Tnx --- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278alloc_id=3371op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] deliverquota root mail denied
courier will not deliver to root. make an alias Frank Siegel wrote: Hi all, I'm using courier-imap and deliverquota to deliver mails with quotas. It works fine with all users at the system, but the problem is: mails to root. The failure message is: temporary failure. Command output: /root/Maildir: Permission denied. If I set suid to deliverquota, the mail is delivered to root, but the delivered mail to the users have a root owner and is not readable by the users. Does anybody have an idea or workaround? Best Regards Frank __ Verpassen Sie keine eBay-Auktion und bieten Sie bequem und schnell über das Telefon mit http://www.telefonbieten.de Ihre eMails auf dem Handy lesen - ohne Zeitverlust - 24h/Tag eMail, FAX, SMS, VoiceMail mit http://www.directbox.com --- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id78alloc_id371op=ick ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id78alloc_id371op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] courier-pop3 login-failed
Andres Nourian wrote:
i'm still have problems in the pop3 validation with authldap.
you still havent posted enough information as the first person who reponded
told you
someone can help me?
not without more information
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] nombre de Andres
Nourian
Enviado el: martes, 23 de diciembre de 2003 10:35
Para: Courier-Users
Asunto: RE: [courier-users] courier-pop3 login-failed
I test this with mysql and is work fine, the problem is with the
openldap.
Thanks,
Andres.
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] nombre de Andres
Nourian
Enviado el: lunes, 22 de diciembre de 2003 10:49
Para: Phillip Hutchings
CC: Courier-Users
Asunto: RE: [courier-users] courier-pop3 login-failed
The attached files are the configuration of my courier-pop3
the userPassword in the openldap is.
attributetype ( 2.5.4.35 NAME 'userPassword'
EQUALITY octetStringMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.40{128} )
the query to the openldap is ok, but its return a login failed.
Thanks.
Andres.
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] nombre de Phillip
Hutchings
Enviado el: viernes, 19 de diciembre de 2003 21:16
Para: Andres Nourian
CC: Courier-Users
Asunto: Re: [courier-users] courier-pop3 login-failed
Check your logs. If you can't make sense, send the information to the
list. Saying
it doesn't work without sending any information is like going in to
a supermarket and asking where they keep the food.
On 20/12/2003, at 3:43 AM, Andres Nourian wrote:
Hi, i'm configured the courier-pop3 with authldap, the query to the
openldap
is ok, but its return a login failed.
thanks,
Andres.
winmail.dat
---
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278alloc_id=3371op=click
___
courier-users mailing list
[EMAIL PROTECTED]
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Courier V0.28 -- Mails Bounce Back From Certain DOmains
Original Message From: ThunderBoltTo: [EMAIL PROTECTED]Sent: Friday, December 26, 2003 8:12 AMSubject: [courier-users] Courier V0.28 -- Mails Bounce Back FromCertain DOmains Hi all. This is a problem which i need solution to. In fact it was due to this error that i could not subscribe to the list from the domain/server where courier is running. Now the problem: Mail to certain domains bounces back with following error: Your message to the following recipients cannot be delivered: [EMAIL PROTECTED]: x2concepts.com [216.67.246.91]: MAIL FROM:[EMAIL PROTECTED] SIZE=1180 501 [EMAIL PROTECTED] SIZE=1180: malformed address: SIZE=1180 may not follow [EMAIL PROTECTED] Notice the malformed address also notice how you did [EMAIL PROTECTED] now how do you expect us to debug this for you? also 0.28 is very old, I suggest you get something more up to date. Got a similar error when tried to confirm subscription to the list so subscribed from this account. Any suggestions on how to rectify this. Thnx Anup Best Regards Anup K Singh Do you Yahoo!? Yahoo! Photos - Get your photo on the big screen in Times Square
Re: [courier-users] adding users in bulk
- Original Message - From: jannie muldens [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, December 19, 2003 7:33 PM Subject: [courier-users] adding users in bulk Hello list, at the school i'm working we're considering switching to courier-mta as our mail service, the problem we have is that each year we've got about 300 new accounts to add and about the same number to remove. We're wondering if there is a way to easily add/remove that number of users, can it be done with a script or some tool? For daily maintaince we're using Quica. look in quicas mass directory for importing, for removing you could just try whipping out a .sql script. or sql for both... its only a rdbms Thanks in advance, HJ Bakker _ MSN Zoeken, voor duidelijke zoekresultaten! http://search.msn.nl --- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278alloc_id=3371op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278alloc_id=3371op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Migrate plain userdb to mysql and courier web-based
Vincent Lee wrote: Hi all, Im using Courier-mta version 0.44.2 with plain userdb running in Solaris 9 OS now. I have around 5,000++ mail users. But I discover plain userdb doesnt has any user management GUI that fit to the mail administrator, where mysql does. This has brought difficulties to the mail administrators who want to check user info and add user account etc. So does anyone convert or migrate plain userdb to mysql userdb before? Take a look at quica http://quica.sourceforge.net included are migration tools from userdb If yes, is that complicated? Im thinking of write a VB script to convert the userdb to mysql usedb format, don't know whether it is possible. Or else, if you know any plain userdb management GUI or Courier web-based management software, which can introduce to me? quica is web based management but its not for userdb format, its just mysql/postgresql based Many thanks. Regards, Vincent --- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278alloc_id=3371op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] searchable courier-users archive?
Joris wrote: Hi, Is this mailinglist archived somewhere with a search function? http://www.riverside.org/archive/html/courier-users/ The sourceforge archive/forum is not very handy... --- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278alloc_id=3371op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Quick Question about Refusing Non-Authenticates SMTP
Christopher Miles wrote: I have a quick question. I use Courier and I have it setup to only relay mail from authenticated users. I'm pretty sure that this is working okay, but I'm seeing a lot of messages in the log file like this one: Dec 8 06:41:33 alice courieresmtp: id=0003C56A.3FD3F8E8.542D,from=,addr=[EMAIL PROTECTED] om: Connection refused Dec 8 06:41:33 alice courieresmtp: id=0003C56A.3FD3F8E8.542D,from=,addr=[EMAIL PROTECTED] om,status: deferred Is it normal for Courier to refuse the connection, then set it's status to deferred? Or did I mess something up? This is a bounce from your machine to 6561.happymailerz.com, they are refusing the connection not you. Concerned, -- Miles --- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278alloc_id=3371op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] setting up courier questions
you can also use quica, it has support for multiple languages as well. http://quica.sourceforge.net/ list-subs1 wrote: Hi, I needed to do the same thing and found the phpCourier project. This has worked out excellent for me. Exactly the tools I was looking for. You can find the info and the product from sourceforge http://sourceforge.net/projects/phpcourier/ Hope this is relevant, Alan -- Original Message -- From: Evelyn Pichler [EMAIL PROTECTED] Date: Thu, 04 Dec 2003 20:18:25 +0100 I am using courier as an MTA for quite a while now. Works nicely! Now a friend got himself one of this root servers and I suggested to him to use courier for his pop3 boxes and for everything else. I am looking for an easy method for him to create users on his box. He just needs virtual mail users, that do nothing else but mail. I don't think that can be done with webadmin or? Plus, anyone knows a german howto? His english is not too good. ev --- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278alloc_id=3371op=click ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] problem after upgrade to 0.44
Original Message From: Lars HolmströmTo: [EMAIL PROTECTED]Sent: Tuesday, December 02, 2003 3:20 PMSubject: [courier-users] problem after upgrade to 0.44 Please turn off the html mail. I downloaded the tarball for 0.44, build the RPMs and did an rpm -Uvh on my 0.42 courier running RH8.0 system All users can run IMAP and pop All users can run WEBmail A lot of mails are received from hosts on internet. My local users connected via LAN behind a NAT box have problems though First i tested the name resolver # testmxlookup pc033.flysta.net Domain pc033.flysta.net: Relay: pc033.flysta.net, Priority: -1, Address: :::172.24.99.78 # I believe this is OK. Then I tcpdumped to see what is going on. 20:52:22.421153 pc033.flysta.net.3845 mail2.smtp: S 188649764:188649764(0) win 16384 mss 1460,nop,nop,sackOK (DF) 20:52:22.421228 mail2.smtp pc033.flysta.net.3845: S 527037979:527037979(0) ack 188649765 win 5840 mss 1460,nop,nop,sackOK (DF) 20:52:22.423134 pc033.flysta.net.3845 mail2.smtp: . ack 1 win 17520 (DF) 20:52:22.455716 mail2.45023 pc033.flysta.net.auth: S 540138836:540138836(0) win 5840 mss 1460,sackOK,timestamp 787112492 0,nop,wscale 0 (DF) 20:52:25.453642 mail2.45023 pc033.flysta.net.auth: S 540138836:540138836(0) win 5840 mss 1460,sackOK,timestamp 787112792 0,nop,wscale 0 (DF) 20:52:31.453622 mail2.45023 pc033.flysta.net.auth: S 540138836:540138836(0) win 5840 mss 1460,sackOK,timestamp 787113392 0,nop,wscale 0 (DF) 20:52:40.624503 arp who-has 172.24.99.5 tell pc033.flysta.net 20:52:43.453568 mail2.45023 pc033.flysta.net.auth: S 540138836:540138836(0) win 5840 mss 1460,sackOK,timestamp 787114592 0,nop,wscale 0 (DF) Why does the mailserver try to talk with the auth socket ? it is doing an ident lookup After the last packet in the tcpdump above, nothing more happend and the client will timeout. This happend both with Outlookand Outlook Express. But running Outlook express to another mailserver also running 0.44 works. Loggin in via WEBmail from runs OK. I think the ident timeout is over 30 seconds, perhaps outlook doesnt like to wait? The other option would be to turn off ident lookups Can some one pls give me some ideas for where to look for the problem ? /Lars
Re: [courier-users] Maildir permissions help!
undergra wrote: Hi, I'm using postfix-2.0.6-8 on my SuSE 8.2 with courier-imap-ldap-2.1.2-2 and courier-imap-2.1.2-2. All works correctly but i have a problem with Maildir permissions because when i send an e-mail and connect to pop3 i receive this message: -ERR Maildir: Permission denied Connection closed by foreign host. My perms: drwx--5 joanrinformatica9 120 Nov 19 15:12 Maildir drwx--2 joanrinformatica9 48 Nov 19 15:12 cur drwx--2 joanrinformatica9 96 Nov 19 15:12 new drwx--2 joanrinformatica9 48 Nov 19 15:12 tmp -rwx--1 joanrinformatica9 491 Nov 19 15:12 1069251165.V802I7fde .mail # telnet 127.0.0.1 110 Escape character is '^]'. +OK Hello there. user joanr +OK Password required. pass password -ERR Maildir: Permission denied Connection closed by foreign host. If i do a chown postfix -R * on Maildir directory all works correctly. # cd Maildir # chown -R postfix * # telnet 127.0.0.1 110 Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. +OK Hello there. user joanr +OK Password required. pass password +OK logged in. list +OK POP3 clients that break here, they violate STD53. 1 507 What are the correct permissions on Maildir ? it needs to be owned by the uid/gid in your auth record This problem only occurs when i use a LDAP user but if i use a system user (with identical permissions -700-) i don't have this problem my authldaprc: LDAP_SERVER IP LDAP_PORT 389 LDAP_BASEDN o=organization LDAP_AUTHBIND 1 LDAP_TIMEOUT5 LDAP_MAIL mail LDAP_GLOB_GID postfix LDAP_GLOB_UID postfix LDAP_HOMEDIRhomeDirectory LDAP_FULLNAME cn LDAP_DEREF never LDAP_TLS0 I am not familer with ldap, but the LDAP_GLOB_GID postfix LDAP_GLOB_UID postfix seems to be a giveaway here, unless you specifiy the uid/gid in the users record it looks like this is a default? # id postfix uid=51(postfix) gid=51(postfix) groups=51(postfix) anyone help me please? thanks! --- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Re: couriermlm annoying yes confirmation
John Belmonte wrote: Sam wrote: Since the purpose of the confirmation request is to make sure that the human being that owns this address actually sent the subscription request, it obviously won't be very useful to have a confirmation process that can be easily fooled by an autoresponder. ?? It would take 5 minutes for someone to add the yes functionality to an autoresponder script. It probably wouldn't even need to parse the request message, assuming that changing the subject won't interfere with other mailing list managers. The point is not that it cannot be automated, its for ignorant autoreponders that would reply back to any request, therefore adding users to a list without their knowledge and getting the list manager in hot water. Albeit the user and autoresponder should not be so stupid, but it happens. For those of us not wanting a user's first impression of our mailing list to be along the lines of STOP and make sure you waste your time reading these overly complicated instructions!, and who believe this feature is much more of a bother to users than to troubemakers, an option is in order. overly complicated is reading 5 lines and typing 'yes' ? I have never had a user complain about the difficulty of getting on a list. Attached is a patch that adds a SIMPLECONFIRM option. Set it to 1 to avoid the need to change the subject for subscribe/unsubscribe confirmations. Its not up to me to accept the patch, but I can see why you want it. In my opinion its not necessary, but if you insist your users are this ignorant I cannot argue. --- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] How to share the entire user mailbox to an admin user?
David Gomillion wrote: OK, now I'm replying to my own post, because I got a minute and went ahead and tried it. I was able to create a symlink called .alias in my Maildir of my account. The command I typed is ln -s /usr/mail/[EMAIL PROTECTED]/Maildir/ /usr/mail/my_account/Maildir/.alias This was all on one line, with one space between each section. Your email client may word-wrap, so beware... I now have a pretty little folder called alias that has the alias account's inbox. Note: no other folders were brought across, so this isn't really a full big brother type thing. But it does give you the ability to share the inbox for processing incoming mails and whatnot... You need to be careful of permissions for this, and I don't know what would happen if the folder is attempted to be removed. as long as both users have the same uid/gid for courier this could be a valid use, otherwise moving messages around will get the wrong uid/gid in the real users folder. Hope this helps, David -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Gomillion Sent: Tuesday, November 04, 2003 12:17 PM To: [EMAIL PROTECTED] Subject: RE: [courier-users] How to share the entire user mailbox to an admin user? I'm not sure what you mean by it not being legal but... Two ways of doing this come to my mind. 1. Either know all of your user's passwords or create duplicate accounts for your administrator with the same Maildir. (very bad) Depending on the number of accounts, this could require significant increases in allowed connections, could swamp the server, etc. Just realize the potential costs... 2. Create symlinks in your administrator's Maildir to each of your user's mail. I'm not an expert, but I think this might work... just be sure you name the links well. (better, but still bad) Why do you really want to do this? If you need filtering, then filter. If you need Antivirus, do it with an antivirus program, not a user going in to each account. Finally, be sure you have a good TOS that protects you as much as possible. Also make sure you make it clear that employees may only use the email server for business purposes, in a good Acceptable Use document. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Fabiano Felix Sent: Tuesday, November 04, 2003 11:23 AM To: [EMAIL PROTECTED] Subject: [courier-users] How to share the entire user mailbox to an admin user? Hi all, I'm wondering that if is possible (using a type of sharing command) to sharing the entire mailbox of all users to an admin user (for example, to remove some determined messages). I know that it's not legal, but one of my customers are questioned it for me. Case possible, how this user can connect to this folders? He must subscribe to all mailboxes? Regards, Fabiano Felix --- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Mail Directory Structures.
Lydiard wrote: -Original Message- From: [EMAIL PROTECTED] Sent: Sunday, November 02, 2003 2:46 PM To: [EMAIL PROTECTED] Subject: Re: [courier-users] Mail Directory Structures. You may be mixing up two different things. Let me make sure that we're talking about the same thing. (Sorry if I'm insulting your intelligence! :-) Maildirs are simply special sorts of folders that certain mta's (courier, postfix, etc.) can deliver mail to (one message per file) and certain imap servers (courier) can read. This has nothing to do with Inbox, Outbox, etc. With this sort of setup your Inbox is a maildir, your outbox is a maildir, in fact every folder you see in your mail client is really a maildir. Jeff Thanks for taking the time. Okay, prehaps I got it wrong. I was pretty sure that I'd read that the courier (and/or postfix???) would take care of this for me. Why else must I specify the Sent and Trash parameters in /etc/imapd?? Anyway, if it doesn't, it doesn't.. So moving swiftly on.. This is a client function. First are you creating the folders inside of your INBOX? You set up an account and you specify a HOME and MAIL directory. That MAIL directory is a maildir. So let's say that the HOME directory for someone is /home/mailusers/john and the MAIL directory is /home/mailusers/john/Maildir. The MAIL directory is that user's INBOX. So if you want to create a Drafts folder for this account then you would run maildirmake -f Drafts /home/mailusers/user/Maildir After reading the man file, I thought I had a grip on this when I tried it. The line I used was...Anyway, I deleted everything and started all over again as per your instructions. This worked, but with the net result that I had folders caled Drafts, Sent Items, Outbox and Trash as *subfolders* of my Inbox (Because that is what Outlook called). This looks a) messy and b) illogical. What I would like is to have Drafts, Sent, Trash, etc as *sister* folders to the Inbox. I tried to do this, and it is possible to but Outlook still puts them all as a subdirectory of Inbox. Which doesn't help. Is there a way to do what I want, or am I pissing into the wind? http://www.inter7.com/courierimap/FAQ.html#namespace In outlook this is the Root Folder Path: in your imap account options. Lydiard That would create a maildir /home/mailusers/user/Maildir/.Drafts which your clients should see as the folder 'Drafts'. Maildirs have permissions 700 so make sure that you create the maildir as the proper user. If you create the maildir as root but the account is owned by user john then your client won't be able to access that folder. --- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Courier RPM install issue
[EMAIL PROTECTED] wrote: Hi I get the error below from trying rpmbuild -ta courier-imap-2.2.0.tar.bz2 i have vpopmail-5.3.29 RH 9.0 qmail installed configure: error: /home/vpopmail/etc/lib_deps does not exist - upgrade vpopmail to the current version or fix the permissions on this file configure: error: /bin/sh './configure' failed for authlib error: Bad exit status from /var/tmp/rpm-tmp.81883 (%prep) i searched the list but the answers i got did not help, i tried changing permission, did not help. I do not want to remove vpopmail user also This is actually a problem with vpopmail, it should create this file with the proper information in it. Perhaps the archives http://www.mail-archive.com/[EMAIL PROTECTED]/ would help you. This post http://www.mail-archive.com/[EMAIL PROTECTED]/msg13972.html or similar ones should be helpful. Thank you in advance akin --- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Interesting Problem
Title: Interesting Problem Original Message From: Ryan BurtonTo: 'Tim Hunter' ; [EMAIL PROTECTED]Sent: Monday, October 27, 2003 2:24 PMSubject: RE: [courier-users] Interesting Problem I have the newest version of vpopmail installed, and then installed courier, so it should be fine right? All I know is some version of vpopmail has problems clearing the old password out of memory.. A quick summary of what I remember from an old posting... A passwordnever gets cleared from the buffer so if a 10 char password is used then an 8 char password it appends the last 2 chars from the 10 onto the 8 and therefore you get a bad password. The archives have better more detailed description of the issue. Last I heard the development versions of vpopmail libraries have this fixed. I am sure someone is going to correct my summary with a better technical explaination. The fix was to use a development build of vpopmail and recompile courier with vpopmail support. Another workaround is to configure courier to use a sql backend and tap in to the database directly and work around the broken vpopmail libs. At any rate, it happens in both sqwebmail now as wellm without even using courier or imap. So its an issue with something else, so now Im in the wrong list I guess. Thanks for the help -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Hunter Sent: Saturday, October 25, 2003 10:09 AM To: [EMAIL PROTECTED] Subject: Re: [courier-users] Interesting Problem Original Message From: Ryan Burton To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Saturday, October 25, 2003 12:27 AM Subject: [courier-users] Interesting Problem Ok, this is a weird problem and explains all the issues I have been having since I setup courier/horde. Would not authenticate sometimes, kick me back to the login prompt sometimes, not work at all etc. I have three domains setup and it seems that if there is an email address with 6 characters or less in the e-mail address before the @, it will cause issues or wont work at all. If there are 7 characters or more, everything seems to work fine. I have tested it by creating new accounts on all three domains, and the ones with 6 characters or less I couldnt login to horde, but if its more than 6 characters, seems to be no issues. Its not just in IMP; its also in any e-mail client. The logs dont say anything informative. This sounds alot like the problems when using an older version of vpopmail as the backend. If this is the case upgrade your vpopmail, if not how about more info? Anyone understand this at all?? Thank you. Ryan.
Re: [courier-users] Interesting Problem
Title: Interesting Problem Original Message From: Ryan BurtonTo: [EMAIL PROTECTED]Cc: [EMAIL PROTECTED]Sent: Saturday, October 25, 2003 12:27 AMSubject: [courier-users] Interesting Problem Ok, this is a weird problem and explains all the issues I have been having since I setup courier/horde. Would not authenticate sometimes, kick me back to the login prompt sometimes, not work at all etc. I have three domains setup and it seems that if there is an email address with 6 characters or less in the e-mail address before the @, it will cause issues or wont work at all. If there are 7 characters or more, everything seems to work fine. I have tested it by creating new accounts on all three domains, and the ones with 6 characters or less I couldnt login to horde, but if its more than 6 characters, seems to be no issues. Its not just in IMP; its also in any e-mail client. The logs dont say anything informative. This sounds alot like the problems when using an older version of vpopmail as the backend. If this is the case upgrade your vpopmail, if not how about more info? Anyone understand this at all?? Thank you. Ryan.
Re: [courier-users] HELP with sqwebmail?
- Original Message - From: Scott Sharkey [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, October 24, 2003 10:00 AM Subject: [courier-users] HELP with sqwebmail? Hi All, I am having problems with sqwebmail authentication. I've done this before on other systems without problems, but it's not working on this one. Red Hat 9, sqwebmail 3.6.0, MySQL I have a database defined in MySQL. I can login to that database using the userid and password specified in authmysqlrc, and do a query to get a password, so I know the db is working. When I connect to the server: http://webmail.server.dom/cgi-bin/sqwebmail I get connection refused messages and the following logged in the apache Access Log (NOT the error log!) GET /cgi-bin/sqwebmail HTTP/1.1 303 0 - Mozilla/5.0 Galeon/1.2.7 (X11; Linux i686; U;) Gecko/20030131 The 303 error indicates a redirection. Not sure what that means, exactly. You must have compiled sqwebmail with the option to force ssl connection which means that its trying to redirect to https://webmail.server.dom/cgi-bin/sqwebmail I can get a cgi-test program in the same directory without problems, so I don't THINK it's a problem with Apache, but I'm not sure. Any suggestions? Thanks! -Scott --- This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/ ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/ ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] hack for dealing with DNS-dummies?
Scott wrote: Scott wrote: There was a solution recently posted for dealing with people who have IP addresses for their MX records. The sourceforge mailing list search doesn't work very well so I'm asking if anyone can supply the answer or a link to it. Much appreciated. fyi http://www.mail-archive.com/[EMAIL PROTECTED]/ has a good archive of the list I figured it out - echo fulcrum.net: [65.219.159.47] /etc/courier/esmtproutes Sorry for the repeat posts, I don't know why it's doing that. Only happens when I send to mailling lists, though (?) msgid's are the same. -Scott --- This SF.net email is sponsored by OSDN developer relations Here's your chance to show off your extensive product knowledge We want to know what you know. Tell us and you have a chance to win $100 http://www.zoomerang.com/survey.zgi?HRPT1X3RYQNC5V4MLNSV3E54 ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.net email is sponsored by OSDN developer relations Here's your chance to show off your extensive product knowledge We want to know what you know. Tell us and you have a chance to win $100 http://www.zoomerang.com/survey.zgi?HRPT1X3RYQNC5V4MLNSV3E54 ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] userdb and local passwd
Michael Woods wrote: I am trying to eliminate the error No such file or directory which is currently a result of having users listed in my /etc/passwd file and not having a corresponding Maildir for it. I've started using the userdb, but I'm not sure if/how courier is using it. I have juser in /etc/passwd but not in userdb but I still have a message deferred to juser instead of 550 user unknown. I had userd pw2userdb and then removed the user from userdb and ran makeuserdb. Does courier need to be started after running makeuserdb? Does courier look in userdb and this depends on where you have /etc/courier/authdaemonrc setup to look read that file and http://www.courier-mta.org/authlib.html for a start then in /etc/passwd or does it sound like courier is not using userdb at this point in my configuration at all? Also I'm using 0.37.3 - I know it needs to be updated. Thanks! --- This SF.net email sponsored by: Enterprise Linux Forum Conference Expo The Event For Linux Datacenter Solutions Strategies in The Enterprise Linux in the Boardroom; in the Front Office; in the Server Room http://www.enterpriselinuxforum.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] mysql-based user administration utilities?
Daniel M. Drucker wrote: I am running courier-imap, using the mysql account/authentication backend. Right now, I'm using Captainnet's mailAdmin ( http://maxo.captainnet.net/mailAdmin/index.php ) to administer accounts, but I'm finding it to be something of a crude hack, and am looking for something more robust. Surely I've simply somehow managed to miss seeing the big, useful, stable tool that everyone uses to administer courier-imap+mysql? Or are people all writing their own by hand? try quica, its for the mail suite, not sure how well it would work for whatever mta you are using http://quica.sourceforge.net/ --- This SF.net email sponsored by: Enterprise Linux Forum Conference Expo The Event For Linux Datacenter Solutions Strategies in The Enterprise Linux in the Boardroom; in the Front Office; in the Server Room http://www.enterpriselinuxforum.com ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] it takes a long time to deliver mail
Sabau Dan wrote: I have the following problem, my courier server doesn't retry to send mails to the servers that it relays mail for if the server is offline at the moment it recives the e-mail, or it takes a long time after the server comes online to deliver the mail, please tell me how to force courier to send the mails to the server that just went online. is there any way to send the mails manualy from the queue? courier flush thanks, --- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] it takes a long time to deliver mail
Original Message From: Sabau DanTo: Tim Hunter ; [EMAIL PROTECTED]Sent: Wednesday, October 15, 2003 7:41 AMSubject: Re: [courier-users] it takes a long time to deliver mail 10x for the answer I know that but form the man page I need the ID of the messege or try to flush them all, I have about 20.000 email in queue so it will take a while:) I'm looking for something like in sendmail: sendmail [EMAIL PROTECTED] do you know any thing? d. courier does not have a command to flush messages based on domain, but with some scripting using mailq and courier flush id it would not be difficult. Tim Hunter wrote: Sabau Dan wrote: I have the following problem, my courier server doesn't retry to send mails to the servers that it relays mail for if the server is offline at the moment it recives the e-mail, or it takes a long time after the server comes online to deliver the mail, please tell me how to force courier to send the mails to the server that just went online. is there any way to send the mails manualy from the queue? courier flush thanks, --- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Still: vpopmail error when ./configure-ing courier-imap
Christian Poecher wrote: Hi there, I still cannot run configure of courier-imap. It terminates like before at the configure file for authlib. To get it working I searched the web and saw other people had this error, too. They suggested to change the configure file of authlib, but that entry does not exist in my version of courier-imap. Then I deleted /var/temp/vpopmail-toaster-5.3.8-buildroot/, which only contained empty directories anyway. I did this because I thought configure might have set $vpophome to this dir by error. It didn't help either. Later I discoverd configure does not create the dir I deleted. I noticed there is a vpopmail user and a vchkpw group on my sytem. I cannot say wether they are made my SuSe or by the configure file. I saw a comment in the configure file, that questions regarding vpopmail are ignored on this list, but this seems to be a problem in the courier-imap configure rather than vpopmail. having the vpopmail user and group makes the courier configure detect you want vpopmail support, if you are not using the user/group delete them, I believe this can also be skipped as a configure option, its all in the docs. My system is SuSe 8.1. I want to set up Postfix, with MySQL and Courier-IMAP for virtual users. Can anyone help me to get the configure running? Does anybody know what vpopmail-toaster is compared to the normal vpopmail? Do I have to install vpopmail before I build courier? What is the authlib stuff for? Can I exclude it from building (and configuring)? vpopmail is not required by courier, if you dont need it compile without it. TIA, chris Am Montag, 13.10.03, um 17:40 Uhr (Europe/Berlin) schrieb Christian Poecher: Hi there, I had an error, when I configured courier-imap. Here is the output: configure: error: /var/tmp/vpopmail-toaster-5.3.8-buildroot/home/vpopmail/etc/lib_deps does not exist - upgrade vpopmail to the current version or fix the permissions on this file configure: error: /bin/sh './configure' failed for authlib I 'fixed' the permissions on .../home/vpopmail/etc by giving everyone all permissions, but still I got the same error. I looked for a newer version of vpopmail, but the latest stable version is 5.3.1, so I don't think that is the problem. Any idea on this issue? chris PS: Sorry I did not search the mailing list prior to posting. Search is down. --- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Re: make install-configure
Original Message
From: Fabrcio Carlos
To: [EMAIL PROTECTED]
Sent: Tuesday, October 14, 2003 10:54 AM
Subject: [courier-users] Re: make install-configure
Hi,
Sorry the last messege, I see the erros, but what I can to be?
the errors:
/usr/bin/perl5 ././sysconftool `awk ' $5 == config $1 ~
/\.dist$/ { print $1 }' permissions.dat`
/usr/lib/courier/etc/ldapaddressbook.dist: No such file or directory
/usr/lib/courier/etc/faxcoverpage.tr.dist: No such file or directory
/usr/lib/courier/etc/faxrc.dist: No such file or directory
/usr/lib/courier/etc/faxnotifyrc.dist: No such file or directory
/usr/lib/courier/etc/esmtpd.dist: No such file or directory
/usr/lib/courier/etc/esmtpd-msa.dist: No such file or directory
/usr/lib/courier/etc/esmtpd-ssl.dist: No such file or directory
/usr/lib/courier/etc/courierd.dist: No such file or directory
/usr/lib/courier/etc/pop3d.dist: No such file or directory
/usr/lib/courier/etc/pop3d-ssl.dist: No such file or directory
/usr/lib/courier/etc/imapd.dist: No such file or directory
/usr/lib/courier/etc/imapd-ssl.dist: No such file or directory
/usr/lib/courier/etc/authdaemonrc.dist: No such file or directory
make: *** [install-configure] Error 9
Looks like you didn't run 'make install' first
- Original Message -
From: Fabrcio Carlos
To: [EMAIL PROTECTED]
Sent: Tuesday, October 14, 2003 11:48 AM
Subject: make install-configure
Hi,
I has run the command: make install-configure in the end the system
return the messege:
make: *** [install-configure] Error 9
Where I see this erros?
Fabrcio Carlos
Fbrica de Idias
Fone: +55(61)321 1357
Fax: +55(61)223 1712
SCS - Quadra 2 - Ed. Empire Center - Sala 1301
Braslia/DF - Brasil
CEP: 70.070-904
---
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
___
courier-users mailing list
[EMAIL PROTECTED]
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] No such domain ?
Original Message From: Lars Holmström To: [EMAIL PROTECTED] Sent: Tuesday, October 14, 2003 1:03 PM Subject: [courier-users] No such domain ? I have two courier 0.42.2 mailservers that are linked via ethernet Sending mail from flysta.net to skyitl.se result in an error message, but sending from skyitl.se to flysta.net works ok. Sep 27 19:35:52 mail2 courieresmtp: id=004940A7.3F75CA78.3538,from=[EMAIL PROTECTED],addr=[EMAIL PROTECTED]: No such domain. I checked the nameresolving from the flysta.net ystem, and it seems to be OK. Can some one point me in the direction for where to find the error in configuration ? run testmxlookup skyitl.se on the flysta.net box also check in esmtproutes file for any manual routings [EMAIL PROTECTED] log]# nslookup mail.skyitl.se -silent Server: 172.24.99.6 Address:my DNS#53 Name: mail.skyitl.se Address: 172.24.99.31 [EMAIL PROTECTED] log]# [EMAIL PROTECTED] log]# telnet mail.skyitl.se 25 Trying 172.24.99.31... Connected to mail.skyitl.se. Escape character is '^]'. 220 skyitl.se ESMTP 502 ESMTP command error quit 221 Bye. Connection closed by foreign host. [EMAIL PROTECTED] log]# --- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Running three instances of imapd
Miguel Cabeça wrote: Jon, ClientServer --- imap --- imapd with STLS (xxx.xxx.xxx.xxx:143)--- mail --- pop3 --- pop3d with STLS (xxx.xxx.xxx.xxx:110) --- mail --- imaps --- imapd-ssl (xxx.xxx.xxx.xxx:993) --- mail --- pop3s --- pop3d-ssl (xxx.xxx.xxx.xxx:995) --- mail --- https --- apache with mod_ssl (webmail) (xxx.xxx.xxx.xxx:443) --- imap --- imapd without STLS(127.0.0.1:143)--- mail I suggest the first alternative. Why is that so hard? These are not alternatives! I have them all available to the users. Miguel I read this original email as a nice email to suggest a way to other users how to run 3 different imaps, I don't think the attempt was to start a debate, Miguel was just posting his experiences as an admin in hopes to help another admin in the future. Please don't turn this into a flame war. --- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] How can I test Maildrop?
David Bruha wrote:
Hi,
I have to set local mail fitering rules for several users and I have
thought it to be a simple job with maildrop. What I did is:
1. in /etc/courier/courierd I have set
DEFAULTDELIVERY=| /usr/local/courier/bin/maildrop
where
MAILDROPDEFAULT=./Maildir
/etc/courier/maildrop consists of:
/usr/local/courier/bin/maildrop
2. in test user's home I have created .mailfilter file with 0600
permission consisting of:
VERBOSE=9
logfile filter.log
log mailfilter started
if (/^From: [EMAIL PROTECTED]/)
{
cc !root
}
All mail users are virtual users stored in mysql database.
fyi if you have maildir set in mysql it will ignore DEFAULTDELIVERY
Now if I understand it correctly, this test mailfilter should write to
$HOME/filter.log message mailfilter started and if the sender is
[EMAIL PROTECTED], then also send a copy of this mail to root.
However, it looks as if courier ignores this file - nothing is logged,
no mail comes to root and no error is logged. Actually
/var/log/mail.log states successfull delivery.
---
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
___
courier-users mailing list
[EMAIL PROTECTED]
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] IMAP Folder Structure
Thomas Smith wrote: I'm in the process of converting from Sendmail/Linuxconf/UW-IMAP to qmail/vpopmail/Courier-IMAP. In the process, I've noticed that Courier-IMAP handles the INBOX and subfolders a bit differently than UW-IMAP. In particular, all the folder I'm able to create and modify are stored under the INBOX. Some mail clients try like such things as Sent, Trash, Drafts, and so on, to be in the root of the IMAP connection--that is, at the same level as the INBOX rather than a subdirectory of it. I have the same problem if I try to create a folder manually, too. The error is: The current command did not succeed. The mail server responded: Invalid mailbox name. Otherwise, I'm able to do everything I need to as long as I do it within the INBOX directory structure. Can Courier-IMAP be configured to allow folders to be created at the same level as the INBOX? I think this is what you are looking for http://www.inter7.com/courierimap/FAQ.html#namespace This is a function of the IMAP client, look in the courier-imap docs on how to configure most clients. --- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Address to listen on
root wrote: Hi, I'm new to Courier. Imapd runs pretty smooth, but it will only listen on the default ADDRESS=127.0.0.1 from imapd-conf file. When I am try to expand this to my local net, I get only errors. So what is the usage for adding more IP's to the ADDRESS= line? 143 and 993 are configured open in my Firewall. I am using SUSE8.2 What kind of errors? Cheersm Chris --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Re: [courier-users] Re: Case insensitivity in email addresses
Lucio wrote: Just create the (empty) file locallowercase in the courier 'etc' directory (/etc/courier for rpms, /usr/lib/courier/etc for source builds.) I tried this, and it seems to work for accounts in /etc/passwd, but NOT for virtual accounts using postgresql authentication. are you trying to deliver to any case or authenticate against? locallowercase will make the values lowercase before it handles the delivery, if your values are uppercase in your database you will probably have to change them, make a view or a custom query. Just a guess: configure postgresql so that it performs case insensitive matches on text fields (I don't know how to do this with postresql, but it should be possibile since most DBMS allow this). --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ___ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
