Hello,
On 2014-07-03 at 22:48 -0400, Daniel Kahn Gillmor wrote:
> I just tried to do this for powerpc (from x86-64) and didn't manage to
> create a powerpc executable for gen-posix-lock-obj. I'm not sure what
> i'm doing wrong, but below is a transcript of the full attempt,
> including a demonstr
On Fri, 2014-07-04 at 11:44 +0800, Paul Wise wrote:
> On Thu, 2014-07-03 at 15:11 +0200, Simon Kainz wrote:
>
> > As far as i know, there is no such thing as a whois entry, for e.g.
> > www.fontmatrix.net, only for fontmatrix.net. Question now is: Should I
> > just go up the "domain tree" (in case
Hi again,
On Wed, Jul 2, 2014 at 1:00 PM, Sergei Golovan wrote:
>
> On the other hand, blt, which is currently built with tk8.6, doesn't
> work at all. The demos from
> blt-demo package crashed for me every time (I'm going to file a
> bugreport). So, I guess, we
> have to decide what to do with b
Package: qemu-launcher
Version: 1.8.0~pre0-1
Severity: grave
Justification: renders package unusable
These days, /usr/bin/qemu is not supplied by any Debian package
(according to "apt-file"). Since qemu-launcher does not run without
/usr/bin/qemu, it's not useable.
-- System Information:
Debian R
Package: sogo
Version: 2.2.5-1
Severity: important
Dear Maintainer,
I have a jessie based setup to test upgrading of production systems ahead of
time (I like to be prepared!).
It contains a pure debian install of sogo groupware (all apt-get install and no
downloads from sogo.nu).
There seems t
Hi!
On 2014-07-03 at 20:15, Heikki Kallasjoki wrote:
> One further note: applying the upstream T40224 "NONNULL" patch to the Debian
> 2.70a-2 sources does also fix the issue for me.
As far as I can understand, upstream T40224 was committed on May 20th
while new upstream release 2.71 on June 26th
Package: samba
Version: 2:3.6.6-6+deb7u4
Severity: important
Tags: upstream fixed-upstream patch
Apparently upstream bug #9139 applies to the samba version in wheezy,
making it impossible to use it in an AD setting. See the original report
(with patch) at https://bugzilla.samba.org/show_bug.cgi?id
I've printed this file successfully with evince-gtk.
I do not have access to a real printer at this moment, but lp produces blank
page on cups-pdf printer, just like qpdfview. Evince prints to cups-pdf
successfully.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
Dropping gnupg from CC, because this is boring to them.
On Thu, Jul 03, 2014 at 10:48:58PM -0400, Daniel Kahn Gillmor wrote:
> On Thu 2014-07-03 02:46:00 -0400, Werner Koch wrote:
> > Right. This is why the instructions in README
> >
> > build="$(build-aux/config.guess)"
> > ./configure --pre
Hi Pino,
On Fri, 04 Jul 2014, Pino Toscano wrote:
> There is no "secret plot" or whatever meant to make the interaction
> with TeX worse; just like you said above you were busy, also poppler
> people are.
Sorry, don't get me wrong ... *I* don't care for that
This has *nothing* to do with TeX
I'm forwarding a message from Paul Wessel - GSHHS maintainer.
Sylwester
Original Message
Subject: Re: RFP: GSHHS binary datafiles and the C header file
Date: Thu, 3 Jul 2014 14:30:46 -1000
From: Paul Wessel
To: Sylwester Arabas
CC: Paul Wessel , sub...@bugs.debian.org, Axel
B
Hi Matthias,
you posted on debian-ports and some others about the 4.9 transition.
I have now the problem with building texlive-bin on s390x. The
resulting binaries segfault on various occasions during the tests.
Switching to gcc/g++ 4.8 fixes this problem.
Do you have any suggestion on how to fi
package: python-sqlalchemy
version: 0.9.6-1
I'm packaging gnukhata and it uses out parameters in postgresql stored
procedures. It is working well with sqlalchemy 0.7.x but it fails in
0.9.x hence I cannot upload the package to unstable. I have made a
personal repo of the package which you can try
Hi,
On 2014-07-04 01:39, Norbert Preining wrote:
As I'm currently writing, the patch has been considered a good
starting point but it is not complete yet, nor it has been ACKed.
Agreed. But the whole point is that it is a *regression* because
in older versions of poppler it did work. So there
Hi,
> Your package failed to build on s390x, preventing testing migration
> and blocking the poppler transition.
Ok, the culprit is gcc-4.9, which produces buggy binaries that segfault.
with gcc 4.8 it is fine.
How do we do here? Does anyone have a suggestion besides sleecting
gcc-4.8 fro buildi
This is unlikely to be fixed, as it requires the patched Qt, which is
not used in the official debian packages [1].
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679755#55
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Con
Source: powerline
Severity: normal
Please use these package sections instead of the ones you have now.
Source: powerline
Section: shells (or utils)
Package: powerline
Section: shells (or utils)
Package: fonts-powerline
Section: fonts
Package: python-powerline
Section: python
Package: python-p
Package: ftp.debian.org
Severity: normal
Hi,
this request is overdue for some time. Hotkeys is upstream dead for
some time and does not really work anymore with recent X. I failed to
get someone interested in maintaining it. Therefore I think a removal
would be the best solution.
Thanks
Alex
-
Source: powerline
Severity: normal
The binary package descriptions are describing the source package
instead of the binary packages. fonts-powerline is clearly not "a
statusline plugin for vim" nor a "ultimate statusline/prompt utility"
for example. Please rewrite all the descriptions based on wha
Package: wnpp
Severity: normal
Hi,
I don't use vlock anymore, so it would be good if someone else would
take care of it.
Alex
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: wnpp
Severity: normal
Hi,
I don't use gcstar anymore and someone using it shoud take care of it.
Alex
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: dahdi-source
Version: 1:2.7.0.1~dfsg-1
Severity: important
Some evil kernel hacker person updated the Linux internals in an incompatible
way.
Current Upstream is 2.9.1.1 …
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (700, 'testing'), (650, 'sta
tags 689025 + moreinfo
thanks
Hi Dominik,
On 28/09/12 01:27 PM, Dominik George wrote:
A full GDB backtrace of all threads would be useful for examining this issue
any further.
kI will have to build a test case for that. Obviously, I cannot break
production deliberately for that ;).
Did you
Hi Andreas,
On Thu, 3 Jul 2014 19:16:52 +0200, Andreas Metzler wrote:
> On 2014-07-03 Atsuhito Kohda wrote:
> [...]
>> But then I'm afraid libgnutls-dev should depends on
>> libgnutls28-dev.
>> I believe dependency on libgnutls-dev is much reasonable
>> than dependency on libgnutls28-dev.
>
>
CCing the Mailing List
On 07/03/2014 08:24 PM, Peter Plessas wrote:
> I am having the same issues with usb-autosuspend on two different
> machines running Debian testing.
> I have my usb mouse's ID in the blacklist of the respective config
> file and had no problems so far.
> After upgrading LMT
Package: redmine
Version: 2.5.1-2
I tried a simple redmine installation with MySQL using default settings without
any plugin. I tried apache2-alias.conf, apache2-host.conf, and
apache2-passenger-alias.conf from /usr/share/doc/redmine/examples/ but all of
them lead to error "Invalid form authent
On Thu, 2014-07-03 at 15:11 +0200, Simon Kainz wrote:
> As far as i know, there is no such thing as a whois entry, for e.g.
> www.fontmatrix.net, only for fontmatrix.net. Question now is: Should I
> just go up the "domain tree" (in case i have more subdomains) until i
> find a domain entry which a
Package: base-files
Version: 7.3
Severity: normal
From the changelog of systemd 215:
* The /etc/os-release file should now be placed in
/usr/lib/os-release. The old location is automatically
created as symlink. /usr/lib is the more appropriate
location of thi
On Monday, October 04, 2010 21:28:12 you wrote:
> On Wednesday 19 May 2010 23:08:14 Moritz Muehlenhoff wrote:
> > havp links against libclamav and is thus affected by #577013. As such
> > it needs to be moved to volatile.debian.org and blocked out of stable
> > with a RC blocker bug.
>
> From now
On Sun, Jun 29, 2014 at 11:54:50AM +0200, Andreas Metzler wrote:
> Please build kbtin against libgnutls28-dev instead of
> libgnutls-dev, the older GnuTLS version should not be part of jessie.
Looks like gnutls26 is still the default, and thus I don't really see the
point. Why would we change hun
bles... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... powerpc-unknown-linux-gnu
configure: autobuild project... libgpg-error
configure: autobuild revision... 1.13
configure: autobuild hostname... alice
configure: autobuild timestamp... 20140703-214711
che
Hello,
I accidentally stuffed up and uploaded the wrong upstream. I have requested
my upload be rejected for now.
Compare:
https://pypi.python.org/pypi/django-jsonfield/0.9.12
https://pypi.python.org/pypi/jsonfield/0.9.20
I tried to go back to the "correct" version, django-jsonfield. It doesn'
reopen 707900
thanks
Debian Bug Tracking System writes:
> This is an automatic notification regarding your Bug report
> which was filed against the guile-pg package:
>
> #707900: guile-pg: please migrate to guile-2.0
>
> It has been closed by Hideki Yamane .
Thanks for the help, though I think
Thanks Daniel and Gregor.
I already maintain some packages in two groups (9 packages). However,
for special reasons, I want to maintain this package alone.
Regards,
Eriberto
2014-07-03 19:12 GMT-03:00 gregor herrmann :
>> You may want to drop an email to the guys on the Debian Perl Group
>> Lis
On 2014-07-02 21:14, Mike Gabriel wrote:
On Mi 02 Jul 2014 14:09:10 CEST, Sune Vuorela wrote:
I want to ensure that neither of us gets to debug weird crashes if
both
libraries are loaded into the same application.
@Sandro/Kolabsys: to me it feels as if Sune suggestions should be
implemented
On Thu, 03 Jul 2014, Emilio Pozuelo Monfort wrote:
> Your package failed to build on s390x, preventing testing migration
> and blocking the poppler transition.
Indeed - and now i have tried to track this down, without much
success. pdftex is crashing, without *any* changes between
the previous and
On Thu, Jul 03, 2014 at 08:25:58PM +, Mike Gabriel wrote:
> >The mate-media metapackage should give the priority to PulseAudio backend.
> >The attached debdiff changes the control file accordingly.
>
> Why do you think this pulse should be the default?
Because 99% of the average desktop user
tags 743243 + pending
thanks
Dear maintainer,
This bug has been pending for some time, and needs fixing for new
ports, including arm64 which is building now:
(http://buildd.debian-ports.org/status/architecture.php?a=arm64&suite=sid).
So I've prepared an NMU for corosync (versioned as 1.4.6-1.1)
The modified postinst in trousers 0.3.13-1 still doesn't work when
installing with multistrap or some other offline method, since udevd
isn't running.
The udevadm commands should be prefixed with invoke-rc.d so they are
skipped during offline installs.
--Ed
--
To UNSUBSCRIBE, email to debian-b
CORRECTION.
Thought I was running the rt image, but that's another machine (obviously).
All else is correct.
-- TheGZeus: Proof of Ferocious Will --
On 3 July 2014 18:35, The GZeus wrote:
> Source: linux-image-3.14-1-rt-amd64
> Severity: important
>
> Dear Maintainer,
>
>
> Twice I have had a
Hi Pino,
> As I'm currently writing, the patch has been considered a good
> starting point but it is not complete yet, nor it has been ACKed.
Agreed. But the whole point is that it is a *regression* because
in older versions of poppler it did work. So there should be code
or a way to find what ca
Source: linux-image-3.14-1-rt-amd64
Severity: important
Dear Maintainer,
Twice I have had a kernel panic with nearly identical messages while playing a
game (Dust: An Elysian Tail, obtained via native Linux Steam, which I installed
from non-free) with an official MS XBox 360 wired controller w
control: retitle -1 [udev] TSSTcorp CDDVDW SH-S223C: hangs system for 1.5 min
on boot (ata1.00: failed command: IDENTIFY PACKET DEVICE)
> TSSTcorp CDDVDW SH-S223C, SB04
It's curious whether the problem can be resolved
by updating the ODD's firmware
to the latest version (currently "SB07"):
http:
Hi Sylwester,
Sylwester Arabas wrote:
> >Why does using CMake request additional build-dependencies? Is this on
> >purpose (i.e. different stuff enabled by default) or is this
> >unexpected.
>
> I'm sorry - of course I misunderstood it. You are right:
> - configure enables Eigen if found, otherwi
Yavor Doganov wrote:
> - The OBJCFLAGS and linker flags are specific to the GNUstep
> installation, and may differ drastically. For example, with
> GNUSTEP_INSTALLATION_DOMAIN everything (headers, libraries, tools,
> etc.) is installed in ~/GNUstep.
I meant with GNUSTEP_INSTALLATION
I tested the version currently in deferred
(soprano_2.9.4+dfsg-1.1.dsc) on arm64 and it builds OK there.
It's not the same patch as in
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752112 but largely
the same symbols are involved. My arm64 patch makes them all
"(optional=internal)". This one j
Package: wnpp
Severity: wishlist
Owner: Andrew Kelley
X-Debbugs-CC: debian-de...@lists.debian.org
* Package name: node-ytdl-core
Version : 0.2.0
Upstream Author : Roly Fentanes (https://github.com/fent)
* URL : https://github.com/fent/node-ytdl-core
* License :
Here are some possibly related bug reports surrounding the printing of
form fields:
https://bugs.launchpad.net/qpdfview/+bug/1121154
https://bugs.launchpad.net/qpdfview/+bug/1260131
https://bugs.launchpad.net/qpdfview/+bug/1322299
Maybe one of these cases applies here too.
Best, Benjamin
--
T
Hi Axel,
On 04/07/14 00:13, Axel Beckert wrote:
Sylwester Arabas wrote:
Could you please try if using CMake gives the same linking error?
Is it expected that to build it with CMake, I also need
libncurses-dev and libeigen3-dev as build-dependencies despite I don't
seem to need them when build
Estimado usuario
la contraseña expira en 3 días Haga clic aquí para validar su dirección
de correo electrónico.
http://www.contactme.com/539a2e70d69f02000200f00d
gracias
administrador del sistema
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscr
Hi Sylwester,
Sylwester Arabas wrote:
> Package: gnudatalanguage
While the gnudatalanguage package is their main dependency, this is
actually nothing we can fix in the gnudatalanguage Debian package
itself.
Bascially for each software you listed, there should be an RFP (need
to be filed against
Hi Vladimir,
printing, especially of PDF forms, is a recurring problem. In several
cases the problem were related to the cups-filters or qpdf packages.
Have you checked whether printing the same forms works for Okular? Could
you try printing the affected file(s) via the lp command line tool?
Best
Hi
Sylwester Arabas wrote:
> Yet another wishlist item - sorry :)
No need to be sorry. That sounds like an easier one. :-)
> but perhaps reporting it now
> might save some time.
Yes, indeed.
> As with gnuplot, it would sometimes be quite useful to have a
> gnudatalanguage-nox package that is s
Control: severity -1 normal
Am Donnerstag, den 03.07.2014, 23:25 +0200 schrieb Michael Biebl:
> Am 03.07.2014 23:19, schrieb Paul Menzel:
> > Package: network-manager
> > Version: 0.9.8.10-4
> > Severity: grave
> > Justification: renders package unusable
> > after a restart of the system after t
On Thu, Jul 03, 2014 at 03:03:40PM +0200, Pietro Battiston wrote:
> This seems quite similar to
> https://bugzilla.mozilla.org/show_bug.cgi?id=1015175
> ... but my browser does not crash with mapy.cz .
>
> Could you check if the following sites also crash your browser?
> http://www.emojitracker.co
On Wed, Jun 25, 2014 at 04:09:18PM +0200, Jan Korbel wrote:
> Package: iceweasel
> Version: 30.0-2
>
> I have a segmentation fault with every access to http://mapy.cz.
> It's the same with "-safe-mode" option and even with new profile.
> Chromium is ok.
>
> I use up-to-date sid/unstable. Kernel 3
On Thu, 03 Jul 2014 22:34:42 +0100, Daniel Lintott wrote:
> > * Package name: liblinux-inotify2-perl
> >Version : 1:1.22-1
> >Upstream Author : Marc Lehmann
> > * URL : http://software.schmorp.de/pkg/Linux-Inotify2.html
> > * License : Perl
> >Sectio
On 2014-07-03 00:39, Emilio Pozuelo Monfort wrote:
On 13/06/14 20:41, Pino Toscano wrote:
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: transition
Control: block -1 by 751432
Hi,
I would like to ask a slot for a Poppler 0.26.x transition.
C
On Sun, Jun 22, 2014 at 3:28 AM, Mark Hindley wrote:
> i have just tried the experimental package in an unstable/experimental chroot
> on non SSE2 hardware (Via Ezra). The good news is that chromium
> 36.0.1985.67-1 runs without SIGILL but then it fails with
>
> [0622/072436:FATAL:content_main_r
Hi Sylwester,
Sylwester Arabas wrote:
> >>>Could you please try if using CMake gives the same linking error?
> >
> >Is it expected that to build it with CMake, I also need
> >libncurses-dev and libeigen3-dev as build-dependencies despite I don't
> >seem to need them when building with autotools?
>
Package: wnpp
Severity: wishlist
Owner: Andrew Kelley
X-Debbugs-CC: debian-de...@lists.debian.org
* Package name: node-jstream
Version : 0.2.7
Upstream Author : Roly Fentanes (https://github.com/fent)
* URL : https://github.com/fent/node-jstream
* License : Exp
tags 751432 + pending
thanks
Dear maintainer,
I've prepared an NMU for gdcm (versioned as 2.4.2-1.1) and
uploaded it to DELAYED/2. Please feel free to tell me if I
should delay it longer.
Regards.
diff -Nru gdcm-2.4.2/debian/changelog gdcm-2.4.2/debian/changelog
--- gdcm-2.4.2/debian/changelog 2
Package: wnpp
Severity: wishlist
* Package name: tmsu
Version : 0.4.2
Upstream Author : Paul Ruane
* URL : http://tmsu.org/
* License : GPLv3
Programming Lang: Go
Description : command-line file tagging tooI and tag-based
virtual filesystem
TMSU is a
tags 747989 + patch
thanks
Hi,
I'm one of the Debian GNUstep maintainers. Emilio Pozuelo Monfort
from the Release Team pointed me at this bug.
The conclusions at the upstream bug are mostly correct -- Object in
the new runtime is barebone and you either have to implement all the
basic methods w
Package: wnpp
Severity: wishlist
Owner: Andrew Kelley
X-Debbugs-CC: debian-de...@lists.debian.org
* Package name: node-clarinet
Version : 0.9.0
Upstream Author : Nuno Job (http://nunojob.com/)
* URL : https://github.com/dscape/clarinet
* License : BSD
Progra
On Thu, Jul 3, 2014 at 3:02 PM, Elimar Riesebieter wrote:
> # VERBOSE=yes /etc/init.d/umountnfs.sh
>^^
> No output at all...
Did it work as expected?
You might want to try adding some echo lines there to see what's going
on and which action is failing.
Best wishes,
Mike
Package: mirrors
Severity: wishlist
Submission-Type: new
Site: ftp.uni-stuttgart.de
Aliases: ftp6.uni-stuttgart.de
Aliases: mirror.rus.uni-stuttgart.de
Type: leaf
Archive-architecture: ALL
Archive-ftp: /debian/
Archive-http: /debian/
Archive-rsync: debian/
Backports-ftp: /debian-backports/
Backpo
Hi Eriberto,
On 03/07/14 22:22, Eriberto wrote:
>
> * Package name: liblinux-inotify2-perl
>Version : 1:1.22-1
>Upstream Author : Marc Lehmann
> * URL : http://software.schmorp.de/pkg/Linux-Inotify2.html
> * License : Perl
>Section : perl
>
Package: bugs.debian.org
Severity: wishlist
Please create a new pseudo-package called "tracker.debian.org" with its
maintainer set to "Debian QA Team ".
The short description could be "Issues with the Debian Package Tracker and
coordination of its maintenance."
Thank you in advance!
-- System I
Control: tag -1 patch
-=| Niko Tyni, 26.06.2014 21:39:04 +0300 |=-
> Source: rrdtool
> Version: 1.4.8-1
> Severity: important
> User: debian-p...@lists.debian.org
> Usertags: perl-5.20-transition
>
> Starting with version 5.20.0 (currently in experimental), the Debian
> perl package is changing t
Am 03.07.2014 23:19, schrieb Paul Menzel:
> Package: network-manager
> Version: 0.9.8.10-4
> Severity: grave
> Justification: renders package unusable
>
> Dear Debian folks,
>
>
> after a restart of the system after the upgrade from NetworkManager
> 0.9.8.10-3 to 0.9.8.10.4, NetworkManager is un
Package: sponsorship-requests
Severity: normal
Dear mentors,
I am looking for a sponsor for my package "liblinux-inotify2-perl".
I am a DM and I need the first upload only.
* Package name: liblinux-inotify2-perl
Version : 1:1.22-1
Upstream Author : Marc Lehmann
* URL
Package: network-manager
Version: 0.9.8.10-4
Severity: grave
Justification: renders package unusable
Dear Debian folks,
after a restart of the system after the upgrade from NetworkManager
0.9.8.10-3 to 0.9.8.10.4, NetworkManager is unable to connect to an
encrypted WLAN.
`nm-applet` prints the
Package: python-tastypie
Version: 0.9.15-1
Followup-For: Bug #721804
Hello,
I already wondered about the naming here, too. To support the claim that
tastypie is unusable without django:
$ pydoc tastypie.authentication
problem in tastypie.authentication - : Requested setting CACHE
Am 03.07.2014 20:57, schrieb Michal Suchanek:
> Package: systemd
> Version: 204-14
> Followup-For: Bug #748056
>
> Hello,
>
> since this is a 'feature' I expect this is still present.
>
> I encountered this problem when one of my drive cables went loose and
> the drive became inaccessible.
>
>
On Thu, Jul 03, 2014 at 11:12:42AM -0400, Felipe Sateler wrote:
> I'm using systemd 208-2 from experimental, if that is of any use
> (upgrading to 208-5 now, but I cannot reboot for a while so filing the
> bug and reporting later if it makes a difference).
Upgrading systemd makes no difference.
Package: python-tastypie
Version: 0.9.15-1
Severity: wishlist
Hello,
now that django is available for python3 in Debian (since 1.6.5-2) it
would be nice to also have tastypie for python3.
I tried to create a patch, but I failed with the cdbs stuff. Just adding
python3-tastypie to d/control seems
Source: grail
Severity: minor
Tags: patch
User: pkg-llvm-t...@lists.alioth.debian.org
Usertags: clang-ftbfs
Hello,
Using the rebuild infrastructure, your package fails to build with clang
(instead of gcc).
We detected this kinf of error:
http://clang.debian.net/status.php?version=3.4.2&key=TAUT
Package: goplay
Severity: minor
Tags: patch
User: pkg-llvm-t...@lists.alioth.debian.org
Usertags: clang-ftbfs
Hello,
Using the rebuild infrastructure, your package fails to build with clang
(instead of gcc).
We detected this kinf of error:
http://clang.debian.net/status.php?version=3.4.2&key=TA
Package: efibootmgr
Severity: minor
Tags: patch
User: pkg-llvm-t...@lists.alioth.debian.org
Usertags: clang-ftbfs
Hello,
Using the rebuild infrastructure, your package fails to build with clang
(instead of gcc).
We detected this kinf of error:
http://clang.debian.net/status.php?version=3.4.2&ke
Hi,
On 2014-07-01 01:25, Norbert Preining wrote:
This bug report seems to be related:
https://bugs.freedesktop.org/show_bug.cgi?id=73291
This fix is not in fontconfig, nor in the TeX Gyre fonts, but
poppler needs to be fixed.
From what I see, the fontconfig change was just a workaround/hac
On Do 03 Jul 2014 12:11:05 CEST, Vlad Orlov wrote:
Package: mate-media
Version: 1.8.0+dfsg1-2
Severity: normal
The mate-media metapackage should give the priority to PulseAudio backend.
The attached debdiff changes the control file accordingly.
Why do you think this pulse should be the defau
On Do 03 Jul 2014 12:36:22 CEST, Vlad Orlov wrote:
Package: mate-settings-daemon
Version: 1.8.1-1
Severity: normal
Tags: patch
The mate-settings-daemon metapackage should give the priority to
PulseAudio backend.
The attached debdiff changes the control file accordingly.
Why do you think t
Control: tag -1 + patch
On Thu, 26 Jun 2014 21:06:40 +0300, Niko Tyni wrote:
> Starting with version 5.20.0 (currently in experimental), the Debian
> perl package is changing the "vendorarch" library paths (currently
> /usr/lib/perl5) to include the multiarch triplet and the perl version. See
> #
Dear SeqAn Developers,
We distribute SeqAn in Debian and recently packaged SeqAn version 1.4.
However after switching to the new version tophat [0] fails to build.
Here are the build errors which we couldn't solve:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733352#45
It would be really g
On Thu, Jul 03, 2014 at 08:07:17PM +0200, Werner Koch wrote:
> On Thu, 3 Jul 2014 17:59, hel...@subdivi.de said:
> > * The list of Debian architectures I am trying to crossbuild for is:
> >alpha, arm, arm64, armel, armhf, hppa, i386, ia64, m68k, mips,
> >mips64el, mipsel, or1k, powerpc, p
On 2014-06-16 13:27, Thomas Voigtmann wrote:
Dear Ralf,
(note the Debian BTS does not subscribe submitters by default.)
I hit the same problem a while ago. Could be this bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73291
There's a workaround mentioned there
(https://bugs.freedesktop.org
Hi,
sorry for the late reply, and thanks for your reports.
Would it be possible to update your changes to the man pages provided
by poppler-utils to the newer Poppler 0.26.2, and send them upstream?
You can open a new bug (just one for all the changes should be
enough) at https://bugs.freedeskt
On Thu, Jul 03, 2014 at 09:08:26PM +0200, Aurelien Jarno wrote:
> On Mon, Jun 16, 2014 at 05:43:47PM +0200, Raphael Geissert wrote:
> > On 28 May 2014 15:30, Aurelien Jarno wrote:
> > > On Wed, May 28, 2014 at 03:20:24PM +0200, Raphael Geissert wrote:
> > >> On 28 May 2014 15:03, Aurelien Jarno w
reassign 658136 qthid-fcd-controller 3.1-1
retitle 658136 qthid-fcd-controller: race in hid-libusb.c causing segfaults
thanks
On Tue, Jan 31, 2012 at 04:46:53PM +0100, Rene Arnhold wrote:
> Package: libusb-1.0-0
> Version: 2:1.0.9~rc3-3
> Severity: important
> File: libusb-1.0
>
> Dear Maintainer
Hi,
On Thu, Jul 3, 2014 at 8:12 AM, Osamu Aoki
wrote:
> On Wed, Jul 02, 2014 at 07:56:49PM +0200, Emilio Pozuelo Monfort wrote:
> > > The renaming is due to a backward-incompatible API change in
> > > librime 1.0, where some struct members changed types. So I
> > > followed the recommendation her
tag 752983 + pending
thanks
Some bugs in the libwiki-toolkit-plugin-rss-reader-perl package are
closed in revision 0f2f8b92fdc65f30107eebda3a74696d933c3430 in branch
'master' by gregor herrmann
The full diff can be seen at
http://anonscm.debian.org/gitweb/?p=pkg-perl/packages/libwiki-toolkit-plug
Package: slurm-llnl
Version: 2.6.7-1
Severity: important
Hello!
slurm-llnl is currently not installable on unstable:
root@znote-t60l:~# apt-get install slurm-llnl
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be
On Thu, Jul 03, 2014 at 09:24:32PM +0200, gregor herrmann wrote:
> On Thu, 03 Jul 2014 20:20:41 +0100, Dominic Hargreaves wrote:
>
> > > > This package fails to build with perl_5.20.0-1 from experimental:
>
> > > 0) Generic fix: let's move the package to pkg-perl and update the
> > >packaging
On Thu, 03 Jul 2014 20:20:41 +0100, Dominic Hargreaves wrote:
> > > This package fails to build with perl_5.20.0-1 from experimental:
> > 0) Generic fix: let's move the package to pkg-perl and update the
> >packaging :)
> I'm not able to pick up any packaging work at the moment, but very hap
Control: tag -1 + patch
On Sat, 28 Jun 2014 09:21:46 +0300, Niko Tyni wrote:
> This package fails to build with perl_5.20.0-1 from experimental:
>
> Installing
> /«PKGBUILDDIR»/debian/libwebservice-musicbrainz-perl/usr/share/man/man3/WebService::MusicBrainz::Response::ISRCList.3pm
> rm
> /
Dear Maintainer,
just a small note:
This seems related to the change from mplayer to mplayer2 in jessie.
Needed for some other reason to install the mplayer from wheezy and
there the sound is now working with the dvbcut from jessie and mplayer
from wheezy.
Kind regards,
Bernhard
--
To UNSUBSCR
On Thu, Jul 03, 2014 at 09:16:12PM +0200, gregor herrmann wrote:
> Control: tag -1 + patch
>
> On Sat, 28 Jun 2014 09:23:12 +0300, Niko Tyni wrote:
>
> > This package fails to build with perl_5.20.0-1 from experimental:
> >
> > Installing
> > /«PKGBUILDDIR»/debian/libwiki-toolkit-plugin-rss-r
Control: tag -1 + patch
On Sat, 28 Jun 2014 09:23:12 +0300, Niko Tyni wrote:
> This package fails to build with perl_5.20.0-1 from experimental:
>
> Installing
> /«PKGBUILDDIR»/debian/libwiki-toolkit-plugin-rss-reader-perl/usr/share/man/man3/Wiki::Toolkit::Plugin::RSS::Reader.3pm
> find /«P
Package: systemd
Version: 204-14
Followup-For: Bug #748056
Hello,
since this is a 'feature' I expect this is still present.
I encountered this problem when one of my drive cables went loose and
the drive became inaccessible.
The drive was ad-hoc connected while placed physically outside of the
1 - 100 of 306 matches
Mail list logo
