On Sat, Oct 25, 2008 at 12:20:00AM +0200, Bill Allombert wrote:
Package: emacs-goodies-el
Version: 29.3-2
Severity: serious
Hello Peter,
Upgrading from etch to lenny fails with
Hi!
I tried to reproduce this bug in a pristine chroot, and have the
following observation:
- Installing this
On 25.10.08 Martin Bagge ([EMAIL PROTECTED]) wrote:
Hi Martin,
package: tex-common
severity: wishlist
tags: patch l10n
Actually there is a swedish translation by Martin Agren (I guess that
A should have a ° on top), last modified in July. I'm pretty sure it
is up to date. Should we really
Package: gksu
Version: 2.0.0-5
Severity: wishlist
Tags: patch l10n
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dear gksu maintainer,
Here's updated Japanese po-debconf template (ja.po) file.
Could you apply it to debian/pos/ja.po, please?
- --
Regards,
Hideki Yamane henrich @
On 2008-10-25 07:58 +0200, Kumar Appaiah wrote:
On Sat, Oct 25, 2008 at 12:20:00AM +0200, Bill Allombert wrote:
Package: emacs-goodies-el
Version: 29.3-2
Severity: serious
Hello Peter,
Upgrading from etch to lenny fails with
Hi!
I tried to reproduce this bug in a pristine chroot,
Quoting Christian Perrier ([EMAIL PROTECTED]):
OK. Do you have time to upload before my NMU enters the archive or
would you profer some time and then I remove my upload to DELAYED.
If you upload today, my NMU will then just be REJECTed when it reaches
0-day...but of course, you might be too
On 2008-10-25 00:20 +0200, Bill Allombert wrote:
Package: emacs-goodies-el
Version: 29.3-2
Severity: serious
Hello Peter,
Upgrading from etch to lenny fails with
Setting up emacs22 (22.2+2-4) ...
emacs-install emacs22
install/cedet-common: Handling install for emacsen flavor
On 09.07.08 Karl Berry ([EMAIL PROTECTED]) wrote:
Hi all,
I'm just doing a full quote.
The submitter requested some changes. One was accepted but upstream,
the others not. Jan, is this fine with you. Can we mark that bug
fixed in upstream and close it as soon as that single change hits
Debian?
Do you have the dbus module loaded? Run semodule -l|grep dbus.
bounty:/home/eddy# semodule -l|grep dbus
dbus1.9.0
What AVC messages do you get when you fail to start hal?
Weird.
In syslog I get this when I invoke-rc.d dbus restart
Oct 25 09:38:33 bounty hidd[5687]: Exit
Oct 25
Package: sn
Severity: wishlist
Tags: l10n patch
Enclosed please find the Italian translation of the Debconf template.
Best regards
vince
# ITALIAN TRANSLATION OF SN'S.PO-DEBCONF FILE
# Copyright (C) 2006 THE SN'S COPYRIGHT HOLDER
# This file is distributed under the same license as the sn
Package: plink
Version: 1.03p1-1
Severity: serious
The /usr/bin/plink name is already taken:
,
| # aptitude install plink
| [...]
| Selecting previously deselected package plink.
| (Reading database ... 134796 files and directories currently installed.)
| Unpacking plink (from
On Sat, Oct 25, 2008 at 08:15:48AM +0200, Sven Joachim wrote:
- apt-get dist-upgrade then does the upgrade from emacs21 in Etch to
the one in Lenny. Nowhere does it pull in emacs22.
Install the `emacs' metapackage in etch, this will pull in emacs22 in
lenny.
Sorry for missing this.
-
On Sun, 19 Oct 2008 20:22:41 -0400
Varun Hiremath [EMAIL PROTECTED] wrote:
On Sun, 28 Sep, 2008 at 09:51:51PM +0800, clayton wrote:
Package: flickrfs
Version: 1.3.9.1-8
Man page states that I can edit .*meta files with an editor. If I
try, I get a Permission Denied error. Similarly if
From what I read in the bug log and what I remember from the history
of uswsusp, this RC bug is *not* present in testing.
Testing has a 0.7-1.2 version which does not have the config change
described by Tim Dijkstra in the bug log.
As a consequence, I think we can safely decide that the
Hi David
I noticed that wicd has been uploaded to debian now. Is it your
intention to be the maintainer from this point forward?
My own availability is a little limited so I am very happy it has found a
maintainer. Do I need to do anything to help?
If it is not your intention to be the
Package: wnpp
Severity: wishlist
*** Please type your report below this line ***
Hi all,
Please package X Pontus XML Editor
http://xpontus.sourceforge.net/
Requirements :- JRE 5 or later
License :- GNU GPL
Developer: Yves Zoundi
-- System Information:
Debian Release: lenny/sid
APT
On 2008-10-25 08:46 +0200, Kumar Appaiah wrote:
On Sat, Oct 25, 2008 at 08:15:48AM +0200, Sven Joachim wrote:
- apt-get dist-upgrade then does the upgrade from emacs21 in Etch to
the one in Lenny. Nowhere does it pull in emacs22.
Install the `emacs' metapackage in etch, this will pull
On 2008-10-24 15:57 +0200, picca wrote:
Le Thu, 23 Oct 2008 18:17:47 +0200,
Sven Joachim [EMAIL PROTECTED] a écrit :
Most likely you (or somebody helpfully for you) have set Emacs.font
via X resources. What does xrdb -query | grep -i emacs print?
Check ~/.Xdefaults and/or ~/.Xresources if
package cryptsetup
severity 503101 normal
thanks
On 25/10/2008 Michael Pobega wrote:
On Sat, Oct 25, 2008 at 01:06:47AM +0200, Jonas Meurer wrote:
On 22/10/2008 Jonas Meurer wrote:
I doubt that cryptsetup really stops your wireless from working.
Instead, something else might have
found 503340 26.12-1
notfound 503340 29.3-2
close 503340 27.1-1
thanks
On 2008-10-25 08:25 +0200, Sven Joachim wrote:
On 2008-10-25 00:20 +0200, Bill Allombert wrote:
Package: emacs-goodies-el
Version: 29.3-2
Severity: serious
Hello Peter,
Upgrading from etch to lenny fails with
On 10/25/08, Rob Landley [EMAIL PROTECTED] wrote:
On Friday 24 October 2008 04:21:29 Bernhard Reutner-Fischer wrote:
A patch was in this thread:
http://www.mail-archive.com/[EMAIL PROTECTED]/msg16297.html
Rob promised to respin it tomorrow and resend it in to the list.
thanks
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I just hit this bug last week (I'm running Sid), and after reading
through all of this, I regressed this package to the version in etch.
This didn't cause any other apparent problems with other packages, and
the DVDs written were then readable
On Sat Oct 25 08:25, Sven Joachim wrote:
The relevant message in that file seems to be this one:
In toplevel form:
silly-mail.el:86:1:Error: /usr/bin/mail is not executable
That is the same problem as in #502762, triggered by a Debian-specific
patch that lets sendmail.el throw an error
Hello Martin, thanks for translation!
Please also fill 'Plural-Forms' header in translation (through msginit or
manually), and
then I will include your translation.
--
Eugene V. Lyubimkin aka JackYF, Ukrainian C++ developer.
signature.asc
Description: OpenPGP digital signature
Quoting Thijs Kinkhorst ([EMAIL PROTECTED]):
tags 502858 patch
thanks
Hi Daniel,
Here's a patch to fix this, please include it in the next Aptitude upload.
Thanks. I'm building an NMU right now and will upload it to t-p-u
unless Daniel objects very soon.
signature.asc
Description:
On Fri, Oct 24, 2008, Derrick Karpo wrote:
In looking at the /etc/init.d/acpid script from Ubuntu it appears to
solve many of the modprobe issues that I am seeing. It checks to
ensure the modules exist before loading them and won't attempt to load
modules twice. Perhaps it's worth merging
On Sat, 25 Oct 2008, Hilmar Preusse wrote:
On 25.10.08 Martin Bagge ([EMAIL PROTECTED]) wrote:
Hi Martin,
package: tex-common
severity: wishlist
tags: patch l10n
Actually there is a swedish translation by Martin Agren (I guess that
A should have a ° on top), last modified in July. I'm
Hello Michael,
Go ahead with a NMU. It'll be faster and I really think this bug should
be fixed asap.
Thanks for having a look and fixing this issue !
Regards,
Adam.
Michael Biebl a écrit :
Package: ntfs-3g
Version: 1:1.2531-1
Severity: important
Hi Adam,
I'm part of the Debian
Hi,
Is anything happening with this bug? It's rather distressing to see that
I spent two full days debugging this only to see no response to it at
all in over two months...
--
Lo-lan-do Home is where you have to wash the dishes.
-- #debian-devel, Freenode, 2004-09-22
--
To UNSUBSCRIBE,
Hi Josselin,
Le jeudi 23 octobre 2008 à 11:33 +0200, Josselin Mouette a écrit :
reassign 422800 evolution-data-server 1.10.1-2
found 422800 2.22.3-1
tag 422800 + patch
thanks
According to upstream, this bug should be fixed by applying the attached
patch, but it would require testing.
Dear maintainer of cacti-spine and Debian translators,
Some days ago, I sent a notice to the maintainer of the cacti-spine Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
I announced the intent to build and possibly upload a non-maintainer
On Sat, 25 Oct 2008, Eugene V. Lyubimkin wrote:
Hello Martin, thanks for translation!
Please also fill 'Plural-Forms' header in translation (through msginit or
manually), and
then I will include your translation.
new stuff for me but using msginit -i daptup.po -o sv.po -l sv_SE ended me
package: xmame
severity: wishlist
tags: l10n patch
please add the attached po-file to package.
--
/brother
http://frakalendern.se
A vigenere cipher with the Key BRUCESCHNEIER is in fact unbreakable.# Translators, if you are not familiar with the PO format, gettext
# documentation is worth
Package: freevo
Version: 1.8.1-2
Severity: important
Tags: l10n
The generated /etc/freevo/debconf.py doesn't have any source encoding
declaration: this becomes an issue when
Freevo is installed in a French environment, since debconf.py will contain some
non-ascii accents in the VIDEO_ITEMS,
On Sat, Oct 25, 2008 at 08:27:28 +0200, Hilmar Preusse wrote:
On 09.07.08 Karl Berry ([EMAIL PROTECTED]) wrote:
Hi all,
I'm just doing a full quote.
The submitter requested some changes. One was accepted but upstream,
the others not. Jan, is this fine with you. Can we mark that bug
Hello Daniel,
Daniel Kahn Gillmor wrote:
di-netboot-assistant should be able to run as a non-privileged user.
Agree. (as it was on my TODO list ;)
My primary implementation idea was to make the folders owned by the
group staff (like /usr/local). Would that fit your need ?
I wonder why you
Le Sat, Oct 25, 2008 at 08:40:59AM +0200, Sven Joachim a écrit :
Package: plink
Version: 1.03p1-1
Severity: serious
The /usr/bin/plink name is already taken:
,
| # aptitude install plink
| [...]
| Selecting previously deselected package plink.
| (Reading database ... 134796 files
Hello,
https://help.ubuntu.com/community/Japanese_Input_and_Fonts_in_Ubuntu_7.10
Now I uninstalled all the relevant packages and reinstalled them.
but I'm experiencing the same problem after
upgrading to Ubuntu Intrepid, qt4 version 4.4.3-0ubuntu1.
I suspect some Ubuntu customization is to
Dear maintainer of chdrv,
On Saturday, October 18, 2008 I sent you a notice announcing my intent to
upload a
NMU of your package to fix its pending l10n issues, after an initial
notice sent on Monday, October 13, 2008.
You either agreed for this NMU or did not respond to my notices.
I will
Le samedi 25 octobre 2008 à 10:47 +0200, Julien Valroff a écrit :
Le jeudi 23 octobre 2008 à 11:33 +0200, Josselin Mouette a écrit :
Could you try applying this patch to evolution-data-server, upgrading it
and check whether it is fixed?
Even without applying this patch, I was not able to
Hi,
I'm using uswsusp for supsending and I noticed the following :
* When waking up with the wifi kill button on (to get WiFi working), the card
is
correctly powered on and the connection will work (modulo some other
problems, ..)
* When waking up with the wifi kill button off (after having
Quoting Christian Perrier ([EMAIL PROTECTED]):
Quoting Thijs Kinkhorst ([EMAIL PROTECTED]):
tags 502858 patch
thanks
Hi Daniel,
Here's a patch to fix this, please include it in the next Aptitude upload.
Thanks. I'm building an NMU right now and will upload it to t-p-u
unless
On Fri, Oct 24, 2008 at 04:27:31PM +0100, Jonny Lamb wrote:
I attach my patch for my NMU 3.2.2-7.1.
Great! Thanks for NMUing. I wonder why this bug has been hidden for such a
long time and was not noticed until recently...
Regards
Javier
signature.asc
Description: Digital signature
Le Wed, Oct 22, 2008 at 07:21:44PM +0200, Thomas Viehmann a écrit :
Adeodato Simó wrote:
Charles, if the fix for this bug is simply adding a depends on
ttf-bitstream-vera, then the fix is suitable for lenny, and we'll
happily unblock it.
Can we have a proper fix, though, please?
Bug
Martin Bagge wrote:
On Sat, 25 Oct 2008, Eugene V. Lyubimkin wrote:
Hello Martin, thanks for translation!
Please also fill 'Plural-Forms' header in translation (through msginit
or manually), and
then I will include your translation.
new stuff for me but using msginit -i daptup.po -o
Thank you :)
Com os melhores cumprimentos / Best Regards
Carlos Lisboa
[EMAIL PROTECTED]
On Sat, Oct 25, 2008 at 11:04, Christian Perrier [EMAIL PROTECTED] wrote:
Quoting Carlos Lisboa ([EMAIL PROTECTED]):
Hi Christian.
I'm the portuguese translator of the cacti-spine debconf and i quite
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, Oct 25, 2008 at 12:14:12PM +0200, Didier Raboud wrote:
I'm using uswsusp for supsending and I noticed the following :
* When waking up with the wifi kill button on (to get WiFi working), the card
is
correctly powered on and the connection
Le samedi 25 octobre 2008 12:26:45 Jonas Smedegaard, vous avez écrit :
On Sat, Oct 25, 2008 at 12:14:12PM +0200, Didier Raboud wrote:
I'm using uswsusp for supsending and I noticed the following :
* When waking up with the wifi kill button on (to get WiFi working), the
card is correctly
* Matthew Palmer [EMAIL PROTECTED] [2008-10-24 07:17]:
As you noted, I added minix-modules for in the oldsys-preseed patch (since
that's where the need for the minix modules is added, technically speaking),
but you've reminded me of something I wanted to ask about anyway: arm vs
armel. I've
Hi!
Could you please test it with current unstable version ?
Looks like you have the same problem in this bug report:
http://www.mail-archive.com/[EMAIL PROTECTED]/msg118243.html
Try to install gstreamer0.10-plugins-base
Thanks
--
Marco Rodrigues
http://Marco.Tondela.org
--
To
Christian Perrier wrote:
Quoting Christian Perrier ([EMAIL PROTECTED]):
OK. Do you have time to upload before my NMU enters the archive or
would you profer some time and then I remove my upload to DELAYED.
If you upload today, my NMU will then just be REJECTed when it reaches
On 2008-10-25T11:53:16+0100, Marco Rodrigues wrote:
Could you please test it with current unstable version ?
Looks like you have the same problem in this bug report:
http://www.mail-archive.com/[EMAIL PROTECTED]/msg118243.html
Try to install gstreamer0.10-plugins-base
It works now.
found 501125 1:1.5.1-2
fixed 501125 1:1.5.3-1
tags 501125 confirmed
thanks
Hello,
I was able to reproduce the bug uim-qt 1.5.1-2 (currently in lenny). I have
also tried to rebuild uim-qt 1.5.1-2 against current lenny (i.e. against Qt
4.4.3), but that didn't make the bug to go away. However, I
On Sat, Oct 25, 2008 at 12:48:17PM +0200, Martin Michlmayr wrote:
* Matt Palmer [EMAIL PROTECTED] [2008-10-24 22:02]:
A better patch, based on Martin Michlmayr's feedback, is attached. Enjoy!
Looks good, thanks. I'll apply it after lenny.
The only remaining question is what default IP
Package: foo2zjs
Version: 20070718dfsg-8
Severity: important
After I had configured my printer (HP LaserJet 1020), I find that I
can't print unless it has been used on another system say
windows, do not poweroff it, then connect to my system. I also find
that if it was turned off and turned on, I
Hi Christian.
I'm the portuguese translator of the cacti-spine debconf and i quite
puzzled to why there is pt and pt2.
Com os melhores cumprimentos / Best Regards
Carlos Lisboa
[EMAIL PROTECTED]
On Sat, Oct 25, 2008 at 09:55, Christian Perrier [EMAIL PROTECTED] wrote:
Dear maintainer of
Here is a patch which silences the error message. Probably not the best
approach, but it works for me. :) With this I could convert my GPX
tracks which didn't have speed elements.
Cheers,
Rodney
--- src/setpath.c.orig 2005-02-06 09:58:47.0 -0500
+++ src/setpath.c 2008-10-25
Quoting Carlos Lisboa ([EMAIL PROTECTED]):
Hi Christian.
I'm the portuguese translator of the cacti-spine debconf and i quite
puzzled to why there is pt and pt2.
This is a leftover from the previous NMU why I just discovered. I
removed the extra file which was irrelevant.
signature.asc
* Matt Palmer [EMAIL PROTECTED] [2008-10-24 22:02]:
A better patch, based on Martin Michlmayr's feedback, is attached. Enjoy!
Looks good, thanks. I'll apply it after lenny.
The only remaining question is what default IP the firmware uses, but
iirc it simply does DHCP. So we should choose
Package: grass
Version: 6.2.3-2.1
Severity: important
If I start GRASS from gnome-terminal, it starts without any problem.
But when I try to start it from the GNOME GUI (e.g. using a launcher)
I can only get the startup dialog and choose the location.
After that, the Slesia map splash screen
retitle 503168 virtualenv shouldn't hard-code absolute path
severity 503168 wishlist
tags 503168 upstream
thanks
On Thursday 23 October 2008 17.53:26 Jeff Licquia wrote:
Adrian von Bidder wrote:
Shouldn't PYTHONPATH be set inside a virtual environment to allow easy
installation of local
Chung-chieh Shan wrote:
On 2008-10-25T11:53:16+0100, Marco Rodrigues wrote:
Could you please test it with current unstable version ?
Looks like you have the same problem in this bug report:
http://www.mail-archive.com/[EMAIL PROTECTED]/msg118243.html
Try to install
tags 502761 patch
thanks
Introducing debconf support in a package that doesn't use it already
is IO too invasive and risking breakage.
So, I recommend simply commenting the call to emacspeakconfig in
postinst as of now so that this package can be released for lenny.
A patch is attached.
I plan
tags 500189 moreinfo
thanks
Hello,
šeštadienis 27 Rugsėjis 2008, Dmitry V. Rutsky rašė:
Now okular fails to start properly with the same messages, so I think it's
likely a problem related to KDE4 libraries.
Was this problem fixed? Do you have uim-qt installed? If so, which version?
--
severity 38 grave
thanks
My system do not have a /dev/cdrom any more (udev-based system) and I
guess many other users will be in the same situation. So this bug
probably renders the package unusable for most users.
IMO the package could well be removed from Debian, there are working
Hi,
I was “assigned” the RC bug as part of BugSprint
(http://wiki.debian.org/BugSprint). Looking at the bug log, it seems
there was a solution back in july, which was implemented in slashy
0.3.12. But this didn't fix the problem.
What is the current status of the bug, and what are the
Package: libapache2-mod-perl2
Version: 2.0.4-3
Severity: grave
After a partial upgrade to Lenny, apache fails to start with the
following message:
| /usr/sbin/apache2: symbol lookup error:
/usr/lib/perl5/auto/Apache2/ServerUtil/ServerUtil.so: undefined symbol:
ap_get_server_banner
This symbol
tags 503111 confirmed pending
severity 503111 important
Re: Roland Rosenfeld 2008-10-22 [EMAIL PROTECTED]
I fear that the problem is triggered by a very long living SSL
certificate, which expires on 11.12.2054 (I know that this doesn't
make sense, but it's an internal appliance, where the
Package: daptup
Version: 0.7.2
Severity: wishlist
Tags: l10n Patch
Hi,
Please find attached the french po templates translation,
proofread by the debian-l10n-french mailing list contributors.
This file should be put as debian/po/fr.po in your package build
tree.
Regards
Hello,
README.Debian of foo2zjs provides the following text:
cut
foo2zjs for Debian
---
Please understand that I had to delete some files which the author is
still providing, because I got no source code for them.
This is necessary to get the package into Debian main.
If you really
retitle 502744 mxallowd: broken debconf handling
thanks
On Sun, Oct 19, 2008 at 06:16:40PM +0200, Lucas Nussbaum wrote:
On 19/10/08 at 17:45 +0200, Michael Stapelberg wrote:
I think the problem is that you don't have an interactive terminal so that
you
can't answer the debconf questions.
severity 449497 wishlist
tags 449497 wontfix
thx
I am well aware that upstream author dislikes all sorts of distribution and
does not want them to ship foo2zjs. However, the non-free stuff was stripped
away from the package, including a lot of the icm files. Please take the
effort yourself to
Package: devscripts
Version: 2.10.38
Severity: normal
File: /usr/bin/licensecheck
The following license text is incorrectly detected as 2-clause BSD:
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
*
Package: vlc
Version: 0.9.4-1
Severity: normal
The experimental version of VLC seems to be starting gnome-power-manager
when playing a movie. Gnome-power-manager never starts by itself in any
other situation that when playing a movie with VLC.
This is unconfortable because:
Package: sleuthkit
Version: 2.52-1
Severity: wishlist
sleuthkit 3.0.0 is available
--
Pt! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen:
http://www.gmx.net/de/go/multimessenger
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
tags 503329 patch
thanks
Patch attached.
Bastian
--
The idea of male and female are universal constants.
-- Kirk, Metamorphosis, stardate 3219.8
diff -u request-tracker3.6-3.6.7/debian/changelog
request-tracker3.6-3.6.7/debian/changelog
---
Steve wrote:
Package: daptup
Version: 0.7.2
Severity: wishlist
Tags: l10n Patch
Thanks for translation. It will be included in the next daptup release.
--
Eugene V. Lyubimkin aka JackYF, Ukrainian C++ developer.
signature.asc
Description: OpenPGP digital signature
Please change the subject to Autopsy 2.20 is released.
--
GMX Download-Spiele: Preizsturz! Alle Puzzle-Spiele Deluxe über 60% billiger.
http://games.entertainment.gmx.net/de/entertainment/games/download/puzzle/index.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
-=| Bastian Blank, Sat, Oct 25, 2008 at 02:20:46PM +0200 |=-
Package: libapache2-mod-perl2
Version: 2.0.4-3
Severity: grave
After a partial upgrade to Lenny, apache fails to start with the
following message:
| /usr/sbin/apache2: symbol lookup error:
tag 503375 + pending
thanks
Some bugs are closed in revision 26214
by Damyan Ivanov (dmn)
Commit message:
add dependency on apache2 (= 2.2.4) because of the new
ap_get_server_banner symbol not available in previous apaches
Closes: #503375: libapache2-mod-perl2 - Uses undefined symbol
Re: Julien Cristau 2008-10-05 [EMAIL PROTECTED]
You should update the shlibs file and ask for binNMUs of the reverse
dependencies built against libpcre3-dev 7.8-1
Or revert to 7.6, which would avoid the mess related to a pcre3 shlibs
bump in unstable at this stage of the release.
I was
Package: varnish
Version: 2.0.1-1
Severity: serious
There was an error while trying to autobuild your package:
Automatic build of varnish_2.0.1-1 on debian-31.osdl.marist.edu by
sbuild/s390 98
[...]
s390-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -DMALLOC_PRODUCTION
-D__isthreaded=true
severity 501515 wishlist
On Fri, 2008.10.24, 298, Robert James Clay wrote:
On Oct 7, 2008, at 9:17 PM, green wrote:
On Tue, 2008.10.07, 281, Robert James Clay wrote:
On Oct 7, 2008, at 7:33 PM, green wrote:
This package is hideously outdated: more than 4 years so.
While it is true that it
Package: libjogl-java
Version: 1.1.1+dak1-1
Severity: serious
There was an error while trying to autobuild your package:
Automatic build of libjogl-java_1.1.1+dak1-1 on debian-31.osdl.marist.edu by
sbuild/s390 98
[...]
c.build:
BUILD FAILED
**
Build finished at 20081025-0840
FAILED [dpkg-buildpackage died]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
] Error 127
make[1]: Leaving directory `/build/buildd/love-0.4.0/debian/doc'
make: *** [build-indep-stamp] Error 2
dpkg-buildpackage: failure: debian/rules build gave error exit status 2
**
Build finished at 20081025-0807
Package: python-matplotlib
Version: 0.98.3-4
Severity: minor
I get the following warning when running ipython -pylab. It doesn't
occur when running ipython on its own.
[EMAIL PROTECTED]:~$ ipython -pylab
/usr/lib/python2.5/site-packages/pytz/__init__.py:29: UserWarning:
Module dateutil was
Adam Cécile (Le_Vert) wrote:
Hello Michael,
Go ahead with a NMU. It'll be faster and I really think this bug should
be fixed asap.
Hi Adam,
attached is the complete diff of the NMU.
If you have no objections, I'd go on with the upload this evening.
Cheers,
Michael
--
Why is it that all
Package: libdirectfb-bin
Version: 0.9.25.1-5
Severity: normal
The documentation in the man page of directfbrc says, that
vt-switching is disabled by default:
| [no-]vt-switching
|Allow to switch virtual terminals using Ctrl+Alt+F?.
|This is an experimental feature that is
Package: w3m
Version: 0.5.2-2+b1
Severity: minor
Using either emacs-w3m or plain w3m, the INPUT fields of the form at
http://community.haskell.org/admin/account_request.html
are not recognized. The line simply ends at Username:, Name: and
E-mail address:. My first guess would be that this
Subject: kqemu raises kernel bug, crashed qemu with segfault
Package: kqemu
Version: 1.4.0~pre1-1
Severity: important
With the kqemu module already installed (with no options, just
modprobe -v kqemu), I launched qemu as a non-privileged user like
this and immediately got a segmentation fault:
MJ On Sat Oct 25 08:25, Sven Joachim wrote:
That is the same problem as in #502762, triggered by a
Debian-specific patch that lets sendmail.el throw an error if neither
sendmail nor /usr/bin/mail can be found, first reported and discussed
in #429059. Since a sensible solution had already
I have recognized the problem I think. The issue occurs when you have
cpu frequency scaling function activated. It appears when CPU was set
to different frequency while inserting analog driver and different
while reading joystick data (for example running a game).
I think the problem is located
Package: lxterminal
Version: 0.1.3-1
On a Lenny system I am setting up, the only terminal I need is lxterminal.
xorg has problems with that because it wants a x-terminal-emulator installed.
lxterminal should provide x-terminal-emulator.
Thanks!
signature.asc
Description: Digital signature
Hi Franklin--
Thanks for the quick response!
On Sat 2008-10-25 05:25:07 -0400, Franklin PIAT wrote:
My primary implementation idea was to make the folders owned by the
group staff (like /usr/local). Would that fit your need ?
I'd rather not do that; membership in group staff is a huge
*Bump*
Is gnome-ppp alive?
It would be great if resolvconf and gnome-ppp could both be installed.
Thanks.
signature.asc
Description: Digital signature
Package: clock-setup
Followup-For: Bug #485064
I have just tested this hwclock bug on a Thinkpad T61, using the
DI build : 5.0 (lenny) - installer build 20081023-09:05
which uses clock-setup 0.97, kernel 2.6.26, and
util-linux 2.13.1.1-1.
The problem didn't show up.
Franklin
-- System
Package: directvnc
Version: 0.7.5-8+b1
Severity: minor
In /usr/share/doc/directvnc/README.Debian, the following is
stated:
The display size is limited to 640x480.
This seems not to be correct, cause I couldn't find any
maloperations using other resolutions (e.g. 1024x768)
until now. This
Package: kiki-the-nano-bot
Version: 1.0.2+dfsg1-1
Severity: normal
No, this doesn't make sense, it just makes kiki crash.
(Syntax: $ is shell prompt, (gdb) is gdb prompt and # is my comments)
$ rm ~/.kiki.hsc
$ gdb kiki-the-nano-bot
...
(gdb) run
...
# select NEW GAME by pressing enter
# go to
On Mon, Oct 20, 2008 at 11:20:19AM +0200, Andreas Henriksson wrote:
see upstream revision 2056 for possible fix:
http://svn.gnome.org/viewvc/gvfs?view=revisionrevision=2056
Brian, can you test the packages at
http://people.debian.org/~schizo/gvfs/
and see if that patch helps with your
notfound 481493 2.6.26-7
thanks
This bug (#481493) is fixed to me in last Kernel Update in Lenny.
I think that root cause is:
* Fix ACPI EC GPE storm detection. (closes: #494546)
How we can see in Fabio message (LKML), some battery issues is reported about
this:
1 - 100 of 277 matches
Mail list logo