Caller ID + mgetty
Hi, We are running small ISP. Recently I tried to get Caller ID of PPP dial-up users. As I had read from mgetty documentation the #CID=1 modem command (with nomder of rings set = 2) switch on this mode. Howevery it does not work for me, though this Acer modem support it. Where can I find more info concerning this subject. TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
some losses after hamm-slink
Hi, after upgrading to slink am unable to work with floppy: Operation not supported by device or something like that. Another problem is that it seems that old way of copying kernel (2.2.5) to another harddisk of floppy by doing dd with previosly set root device by rdev also does not work. Booting hangs at root device mounting point. What I am doing wrong? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
lost IP aliasing
Hi all, Recently I was installing slink on machine with 4 network cards. On of them is recognized as 3c905B (100mps). As it was put to 10mps mode at boot time I switched to kernels 2.2.5-7 and now it works fine in 100mps, but at the same time I am unable to use IP-alias which was working without any problem under old 2.0.36 kernel. What is going wrong? TIA, for any tips, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: tulip 100mps card; need advice
George, thanks for advices, The need for such setup was due to the estimated bandwith of overall network transaction of about 0.5Gps. Thus, using CISCO or any other non-PC based solution we need to establish high speed interface between this switcher and some proxy server. The idea is that attaching network interface directly to PC would allow us to solve this task. Is it sounds stupid? On Sun, 23 May 1999, George Bonser wrote: On Mon, 24 May 1999, Eugene Sevinian wrote: are working reliable at heaivy load. The main goal is to setup a network with star topology, i.e. one central box with 6-7 100mps channels attached to it as well 4-5 10mps ones. Any suggesions concerning hardware components for this central box? How much ROM, which CPU and motherboard I should look for? I have had good luck with the Intel Pro 10/100+ cards. The trouble with going into 10MB mode might not be the network card, many hubs do not auto-negotiate properly. Just force it in the driver at boot. Do you mean linux network driver or card's SETUP utility? I have noticed that hub was able to detect 100mps up to linux loading stage :( Well, looks like money is no object here. Hhmmm :) not quite right, unfortunatly ... Get three of the quad adaptec tulip cards, thats $500-$600 each and gives you 12 ethernet ports on three Are they supported in linux kernel? PCI slots. Make sure those boards will fit ... they are LONG. If you really want to get fancy, you can get a dual-PCI bus machine and put your network on one PCI bus and your disk on the other. Your bottleneck is going to be the PCI bus, you are probably better off getting something like a Cisco 2900 or 3000 series switch rather than trying to do this with a PC. Then we should connect this switch to the server at ~500mps. Is there any standard solution? May be fiber optic? CPU should be SMP Alpha processors. SCSI disk. You are probably in the $10-$15K range for a good system if I am reading this correctly. Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: tulip 100mps card; need advice
George, thanks for info, I'll think about it. Eugene. On Sun, 23 May 1999, George Bonser wrote: Why not use gigabit ethernet? There are a few cards that are supported under Linux. See http://cesdis.gsfc.nasa.gov/linux/drivers/index.html#gigabit for more details.
tulip 100mps card; need advice
Hi ppl, today I had a problems with DEC21143 tulip cards. The problem was that card goes into 10mps mode just after linux loading. It seems that there are problems with tulip drivers. Tommorow I will try to recompile the kernel defining default media type 100baseTx. Probably this will help somehow. HOwever I would like to know is there any any 100mps cards which are working reliable at heaivy load. The main goal is to setup a network with star topology, i.e. one central box with 6-7 100mps channels attached to it as well 4-5 10mps ones. Any suggesions concerning hardware components for this central box? How much ROM, which CPU and motherboard I should look for? Thanks for any points, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
ppp diagnostic
Hi, ppl, few times I got sach info in ppp.log: May 22 21:47:46 spyur pppd[2493]: sent [LCP ConfNak id=0xa magic 0xd845] May 22 21:47:46 spyur pppd[2493]: rcvd [LCP ConfNak id=0xa magic 0xd845] May 22 21:47:46 spyur pppd[2493]: Serial line is looped back. May 22 21:47:46 spyur pppd[2493]: sent [LCP TermReq id=0xb Loopback detected] May 22 21:47:46 spyur pppd[2493]: rcvd [LCP TermReq id=0xb Loopback detected] May 22 21:47:46 spyur pppd[2493]: sent [LCP TermAck id=0xb] May 22 21:47:46 spyur pppd[2493]: rcvd [LCP TermAck id=0xb] May 22 21:47:46 spyur pppd[2493]: Connection terminated. May 22 21:47:47 spyur pppd[2493]: Exit. Can someone explain me what does it means? Does it looks like phone line problem or something else. I am running hamm and use USR 33600 Voice. Thanks forward for any idea, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
lost telnet after upgrading to slink
Hi, recently I got Debian 2.1 from CheapBytes. Upgrading from hamm was done without any warnings, errors. However, it seems that new system had lost telnet...:( (No such file!). At the same time everything is ok with ftp. Should I reinstall netbase or whatever else which contains telnet? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
virus and LILO ?
HI, ppl, Analysing bad behaviour of my PC, the assumption was done about possible virus activity under w95. (W95 and Linux are sharing the same harddisk). Formating disk did not helped at all, so I am thinking about some kind of bootsector based viruses. Is it theoreticaly possible to be infected by such viruses in case of using LILO? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
checking promiscuous mode
Hi, ppl, Does anybody know how to test whether the network card set to promiscuous mode. It is supposed to run it from cron. Thanks, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
slow pinging
Hi ppl, After setting up a new box with Debian in our LAN, we saw that pinging to/from this machine is ~3 times slower then all other PCs among each other. I tryied to turn off all obsolete kernel options but it did not changed to much. Are there any possible reasons except hardware ones for such difference? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
setting virtual hosts with apache
Hi all, It seems that configuring virtual hosts not so easy for me :( The one problem is that after adding virual stuff to httpd.conf for new_host.some_domain, I got lost my old_host.some_domain. I mean that looking from outside at both OLD and NEW addresses one can see only new_host's pages. These strings was added to default httpd.conf file (from hamm). VirtualHost new_host.some_domain ServerAdmin [EMAIL PROTECTED] DocumentRoot /var/www/vhosts/radiovan/ ServerName new_host.some_domain ErrorLog /var/log/apache/new-error.log TransferLog /var/log/apache/new-access.log /VirtualHost Is something wrong in this configuration? The new_host also set in /etc/hosts as alias for original hostname. Another problem is thet putting two virtual host's parameters in httpd.conf cause warning after reloading apache. (Overlapping of two virtualhosts) Would be thankfull for any tips, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
linux usage by well known sites
Hi ppl, I would like to know if there are any well known sites which are running linux? I need some statistics to persuade some decision makers to consider linux for a crusial task machine to provide different internet services. Thanks a lot for any links. Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: linux usage by well known sites
It would be more preferable to present non-linux related sites. However, thanks again and send me more such links ! Please :) well known sites which are running linux? I need some statistics to persuade some decision makers to consider linux for a crusial task machine to provide different internet services. All the sites we host run linux. BTW, how many hits usually occur at these sites? Is such info is available? www.ssc.com ftp.ssc.com debian.ssc.com www.linuxjournal.com interactive.linuxjournal.com www.linuxresources.com www.linuxgazette.com www.thegimp.com Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: linux usage by well known sites
On Thu, 15 Apr 1999, Vaidhyanathan Mayilrangam wrote: [...] Approximatly 37% of the web runs on Linux amd 50% of web on Apache. I forgot the URL, but some site counts the web servers. Methinks there should be some well known sites with 375 of market :). The important thing is how much overall traffic goes through linux. However, I am not sure that it is possible to estimate :) It would be more preferable to present non-linux related sites. However, thanks again and send me more such links ! Please :) well known sites which are running linux? I need some statistics to persuade some decision makers Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Linux vs FreeBSD
Hi ppl, It seems that this is very general question, but can someone give some pros and contra about applying these OSs as either gateway, router, cash-server etc. Many system administrators here are using FreeBSD, and I need to analise other options because I am debian addicted person :) Is any comparative analysis on this issue available on www? Thanks for any points, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
uucp question
Hi ppl, Could someone explain me how should I use uucp to download multiple files at once. This command doesn't work for me: uucp crdlx2\!/var/spool/uucppublic/\*tmp gaguk\!~ ...while these four commands do their job just fine. uucp crdlx2\!/var/spool/uucppublic/123tmp gaguk\!~ uucp crdlx2\!/var/spool/uucppublic/124tmp gaguk\!~ uucp crdlx2\!/var/spool/uucppublic/125tmp gaguk\!~ uucp crdlx2\!/var/spool/uucppublic/126tmp gaguk\!~ Here is what I have found in uucp's info: The shell metacharacters `?' `*' `[' and `]' are interpreted on the appropriate system, assuming they are quoted to prevent the shell from interpreting them first. Do I use wrong quotation symbol before '*'? Probably it would be possible to figure out what is going wrong from debug info. There are some strings where Bad header is mentioned. What does it mean? Thanks in advance for any help, Eugene. -- Login successful DEBUG: fsend_uucp_cmd: Sending Sgaguk -R -N07 DEBUG: zget_uucp_cmd: Got \020ROKN07\000 DEBUG: zget_uucp_cmd: Got \020PgvG\000 DEBUG: fsend_uucp_cmd: Sending Ug DEBUG: fgsend_control: Sending control INITA 7 DEBUG: fgprocess_data: Got control INITA 7 DEBUG: fgsend_control: Sending control INITB 1 DEBUG: fgprocess_data: Got control INITB 1 DEBUG: fgsend_control: Sending control INITC 7 DEBUG: fgprocess_data: Got control INITC 7 Handshake successful (protocol 'g' sending packet/window 64/7 receiving 64/7) 64/7) 2558) Requesting work: /var/spool/uucppublic/*tmp to gaguk!/var/spool/uucppublic 2558) DEBUG: fgsendcmd: Sending command X /var/spool/uucppublic/*tmp gaguk!/var/spool/uucppublic sevinian -d DEBUG: floop: Waiting for data 2558) DEBUG: fgot_data: Charging 217031 to X /var/spool/uucppublic/*tmp gaguk!/var/spool/uucppublic DEBUG: floop: No work for master DEBUG: fgsendcmd: Sending command H DEBUG: floop: Waiting for data 2558) DEBUG: fgot_data: Charging 217031 to X /var/spool/uucppublic/*tmp gaguk!/var/spool/uucppublic DEBUG: floop: No work for master DEBUG: fgsendcmd: Sending command H DEBUG: floop: Waiting for data DEBUG: ftadd_cmd: Got command HN DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17 DEBUG: fgsend_control: Sending control RJ 3 DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17 DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17 DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17 DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17 DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17 DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17 DEBUG: fgprocess_data: Bad header: K 2 TT 0 XOR byte 105 calc 17 DEBUG: fgprocess_data: Got control CLOSE 0 ERROR: Received unexpected CLOSE packet DEBUG: fgsend_control: Sending control CLOSE 0 DEBUG: fgsend_control: Sending control CLOSE 0 DEBUG: fgsend_control: Sending control CLOSE 0 Protocol 'g' packets: sent 3, resent 0, received 3 Errors: header 8, checksum 0, order 0, remote rejects 0 DEBUG: fsend_uucp_cmd: Sending OO DEBUG: fsend_uucp_cmd: Sending OO DEBUG: zget_uucp_cmd: Got \020\011\*\010\011\020OOO\000 Call complete (71 seconds 0 bytes 0 bps) DEBUG: fcsend: Writing sleep sleep +++ sleep sleep ATM0H\r DEBUG: Call failed: 5 (Call failed) Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
DeskJet 320 and gs
Is it possible to use gs with this printer? At this moment my internet connection is very bad that is way I am unable to find the answer at Alladin's page. Probably someone can help me.. I tried to print with deskjet device but did not get right output. Thanks, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: A question about HP DeskJet 710C
Look at http://www.rpi.edu/~normat/technical/ppa/index.html On Wed, 24 Feb 1999, Peter Paluch wrote: Hello everybody, does any of you have some information about printing using Hewlett-Packard DeskJet 710C or 720C under Linux? Is it possible to use those printers under Linux? A friend of mine would like to buy one of those types but he's afraid that it can be a Windows-only printer. Thank you very much in forward. All the very best, Peter -- * * Peter Paluch * * Kukucinova 939/35 * * 024 01 Kysucke Nove Mesto * * Slovakia, Europe * * - * * mobil: +905 16 44 32 * * domov: +421 826 421 2542 * * -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
bash question
Hi ppl, As far as I did not find the answer in bash manual, I hope that someone can help me here. Let say I have two bash scripts and I need the parameter which is set in scr2 to be visable in scr1. scr1: #!/bin/sh export LANG=lang1 echo LANG is $LANG in $0 scr2 echo LANG is $LANG in $0 scr2: #!/bin/sh echo LANG is $LANG in $0 export LANG=lang2 echo LANG is $LANG in $0 However the output is : LANG is lang1 in ././scr1 LANG is lang1 in ./scr2 LANG is lang2 in ./scr2 LANG is lang1 in ././scr1 ^ ... so I have got here the old value of LANG. The question is it possible to get the NEW value which is assigned in scr2? Thanks, Eugene CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: bash question
Thanks Eric, I tried sourcing scr2 and it works faster then CALLING scr2. Eugene. On Mon, 22 Feb 1999, E.L. Meijer (Eric) wrote: Hi ppl, As far as I did not find the answer in bash manual, I hope that someone can help me here. Let say I have two bash scripts and I need the parameter which is set in scr2 to be visable in scr1. scr1: #!/bin/sh export LANG=lang1 echo LANG is $LANG in $0 scr2 echo LANG is $LANG in $0 scr2: #!/bin/sh echo LANG is $LANG in $0 export LANG=lang2 echo LANG is $LANG in $0 However the output is : LANG is lang1 in ././scr1 LANG is lang1 in ./scr2 LANG is lang2 in ./scr2 LANG is lang1 in ././scr1 ^ ... so I have got here the old value of LANG. The question is it possible to get the NEW value which is assigned in scr2? Yes. You need to source the script instead of executing it in a separate shell. Then scr2 can actually be viewed as a part of scr1, but only contained in another file. You source a script with the `.' command: . scr2 The problem with this is that nothing in scr2 is separated from scr1, so the usefulness of having two scripts is gone. As an alternative you could let scr2 print the new value, like scr2: #!/bin/sh export LANG=lang2 echo $LANG scr1: #!/bin/sh export LANG=lang1 echo $LANG LANG=`scr1` echo $LANG But this may not be what you want. The `export' command only works `downward': the exported variable is put in the environment of shells and programs called from the shell where it is used. HTH, Eric -- E.L. Meijer ([EMAIL PROTECTED]) | tel. office +31 40 2472189 Eindhoven Univ. of Technology | tel. lab. +31 40 2475032 Lab. for Catalysis and Inorg. Chem. (TAK) | tel. fax+31 40 2455054 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
bash scripting
Hi, ppl, I would like to know, is it possible to fork the standard stdout of some command into another two or three pipelines. The idea is to avoid unnecessary disk load during temporary file writing/reading. So I need something like this: command1 | command2 | command3 | command4 file1 \-command5 | command6 file2 \-command7 | command8 file3 Does bash allow such things? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
adding network stuff; easy way?
Hi all, Just now I have installed debian on another machine copying whole system from my home computer by cp -ax / /new-disk. As the new system should work at thin ethernet based LAN I have to add (or reconfigure) network stuff to it. How should I do that? Hope it is possible to do without too much trouble. (I have already added network support in kernel) Thanks in advance and ... Merry X-mass to all debian community, Regards, Eugene Sevinian
getty source
Hi, where can I find the source of (a)getty? Thanks, Eugene Sevinian
kbrequest
Hi, I have read that it is possible to run commands using kbrequest. However this does not work for me. Here is the corresponding strings from inittab: kb::kbrequest:/bin/echo abc ... and keybinding from map file: keycode 103 = Up alt keycode 103 = KeyboardSignal Pressing (ALT-UpArrow) simply shows command's history and nothing more. What is going wrong? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia Phone: 374-2-344873
changing console fonts/kbd
Hi all, I am working on 3-lingual database and one of the important task which should be implemented is the friendly user interface for inputing/editing data. At this moment I am thinkig about how an end users will change the current language. The way which is discribed in docs is the running loadkeys, setfont, mapscrn from the command line. However, if you have already running UI under the console then the command prompt is not available. Switching to another tty is not good solution for this case as well as navigating in the UI menu. Is it possible to solve this problem using some smart keybindings? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia
solved; Re: sorting russian text; perl
Thanks for info. Finally I found the solution. The problem was that correct language setting is ru_SU which is not supported under hamm. Do not know about slink. Eugene. On Sun, 13 Dec 1998, Damon Buckwalter wrote: Marcus Brinkmann wrote: On Sat, Dec 12, 1998 at 11:13:09PM +0400, Eugene Sevinian wrote: Hi all, about one month ago there were posting about locale's usage under perl. I tried to use it for sorting russian, but it did not work for me. Is there any additional tricks beside setting LANG=ru_RU; export LANG? I used /usr/share/keytables/ru.map for inputing some russian text. Hope this corresponds to koi8 coding. Maybe try setting LC_ALL too? I believe 'man perllocale' has all of the answers. -- [EMAIL PROTECTED] -- PGP and GPG public keys at http://meta-x.net/keys/ -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
russian text; perl NEED HELP!!!
Hi,
as I run into this problem and do not how to cope with it,
I would like to ask somebody who is workig with russian
just to test whether perl supports sorting of russian texts.
Torsten sent me a simple script which was working for him.
Any help will be greatly appreciated,
TIA,
Eugene
On Sat, 12 Dec 1998, Eugene Sevinian wrote:
Hi all,
about one month ago there were posting about locale's usage under
perl. I tried to use it for sorting russian, but it did not work for me.
Is there any additional tricks beside setting LANG=ru_RU; export LANG? I
used /usr/share/keytables/ru.map for inputing some russian text. Hope this
corresponds to koi8 coding.
Thanks forward,
Eugene.
On 20 Nov 1998, Torsten Hilbrich wrote:
I tried it with the following little sorting program:
use locale;
my @ARRAY;
my $i;
while() {
push @ARRAY, $_;
}
for $i (sort @ARRAY) {
print $i;
}
and it work perfectly (in my case treating ö like o). At least perl
is aware of locales.
Torsten
sorting russian text; perl
Hi all,
about one month ago there were posting about locale's usage under
perl. I tried to use it for sorting russian, but it did not work for me.
Is there any additional tricks beside setting LANG=ru_RU; export LANG? I
used /usr/share/keytables/ru.map for inputing some russian text. Hope this
corresponds to koi8 coding.
Thanks forward,
Eugene.
On 20 Nov 1998, Torsten Hilbrich wrote:
I tried it with the following little sorting program:
use locale;
my @ARRAY;
my $i;
while() {
push @ARRAY, $_;
}
for $i (sort @ARRAY) {
print $i;
}
and it work perfectly (in my case treating ö like o). At least perl
is aware of locales.
Torsten
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
how to create locales? [OFF TOPIC]
Hi all, first I tried to send this Q to debian-i18n, but it seems that list is not active enough. May be someone here would be able to help me on this non-debian specific subject. [BTW, solving this problel will somehow help to promote Debian and linux in general in my country :). ] I am planing to do some job concering localisation of linux for my native language (Armenian). I would like to know which steps should I do for it. One thing which I need to know is how to create locale databse. I was unlucky to find the description of xx_YY file's format. Can someone help me? Would be obliged for any info. TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: surprise! was( USR; dialing wrong number)
On Sat, 5 Dec 1998, Thomas Adams wrote: On Sat, Dec 05, 1998 at 08:19:13PM +0400, Eugene Sevinian wrote: April 1. The matter is that during dialing from minicom it performs kind of maping. So 1-9, 2-8, 3-7...9-1, 0-0. The same is under Norton Terminal Emulation. :))) Are you using pulse dialling? Somewhere I read that there are countries (I think Scandinavian countries were mentioned) where numbers are represented with an amount of pulses which differ from the usual amount of pulses for a given number. Check your init string, maybe it switches your modem to such a weird mode of operation. If it's just ATZ then I would do an ATFW and see if it works. Yes, I am using pulse dialling. It was working correct while tone dialing from another telephone company. However, using ATFW instead of ATZ did not fixed the problem. Thanks to all who have helped me to understand what kind of modem is it. Eugene Sevinian
RE: USR; dialing wrong number
On Fri, 4 Dec 1998, Shaleh wrote: On 04-Dec-98 Eugene Sevinian wrote: Hi all, Could someone explain my why the USR33600 modem which was working without any problem under w95 does not work under Debian. It simply pretends that it works but dial absolutly wrong phone number :(((. The only differens is that under w95 it was installed with explicitly set port/irq. However,on my computer, which has w95 as well, it is set to PNP mode. Any tips are welcomed. Eugene, the phone number is controlled by the script in /etc/chatscripts/. Edit the number after the ATDT. Ooops :(, sorry, I was unclear, discribing the situation. It was minicom from which I was trying to dial. So it is not a problem of the ppp config files. Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
surprise! was( USR; dialing wrong number)
It seems that this modem is very special thing. Might be it was made at April 1. The matter is that during dialing from minicom it performs kind of maping. So 1-9, 2-8, 3-7...9-1, 0-0. The same is under Norton Terminal Emulation. :))) Eugene. On Sat, 5 Dec 1998, Kent West wrote: On Sat, 5 Dec 1998, Eugene Sevinian wrote: On Fri, 4 Dec 1998, Shaleh wrote: On 04-Dec-98 Eugene Sevinian wrote: Hi all, Could someone explain my why the USR33600 modem which was working without any problem under w95 does not work under Debian. It simply pretends that it works but dial absolutly wrong phone number :(((. The only differens is that under w95 it was installed with explicitly set port/irq. However,on my computer, which has w95 as well, it is set to PNP mode. Any tips are welcomed. Eugene, the phone number is controlled by the script in /etc/chatscripts/. Edit the number after the ATDT. Ooops :(, sorry, I was unclear, discribing the situation. It was minicom from which I was trying to dial. So it is not a problem of the ppp config files. Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873 Of course the next question is the obvious one: Is it a winmodem? -- Kent West [EMAIL PROTECTED] KC5ENO - Amateur Radio: When all else fails. Linux - Finally! A real OS for the Intel PC! Life is an ongoing classroom. - Capt. James T. Kirk, Dreadnought -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
USR; dialing wrong number
Hi all, Could someone explain my why the USR33600 modem which was working without any problem under w95 does not work under Debian. It simply pretends that it works but dial absolutly wrong phone number :(((. The only differens is that under w95 it was installed with explicitly set port/irq. However,on my computer, which has w95 as well, it is set to PNP mode. Any tips are welcomed. TIA, Eugene
first attempt to run UUCP; failed
Hi all, I am trying to connect 2 Debian machine, via uucp. I am not sure that I will find answer in this mailing list, however I will try to discribe the problem shortly. At the very initial stage of communication chat script is getting NO CARRIER and exit. At the same time I use this line by minicom without problem, so it seems that the phone line is ok. I think that sometihng is wrong with uucp configuration. Hope, there are UUCP gury around here, who will help me to understand what is going on. Here is the debug info from client side: 54.54 1060) Calling system spyur (port ttyS2) 54.54 1060) DEBUG: fcsend: Writing ATZ\r sleep 55.56 1060) DEBUG: icexpect: Looking for 3 OK\r 55.56 1060) DEBUG: icexpect: Got \r\nATZ\r\r\nOK\r (found it) 55.56 1060) DEBUG: fcsend: Writing sleep ATM0L0E1Q0\r sleep 57.60 1060) DEBUG: icexpect: Looking for 3 OK\r 57.60 1060) DEBUG: icexpect: Got \nATM0L0E1Q0\r\r\nOK\r (found it) 57.60 1060) DEBUG: fcsend: Writing ATDP \D 562635\r 57.60 1060) DEBUG: icexpect: Looking for 7 CONNECT 57.61 1060) DEBUG: icexpect: Got \nATDP562635\r\r\nNO CARRIER 50.95 1060) DEBUG: icexpect: Found 10 NO CARRIER 50.95 1060) ERROR: Chat script failed: Got NO\sCARRIER 50.95 1060) DEBUG: fconn_close: Closing connection 50.96 1060) DEBUG: fcsend: Writing sleep sleep +++ sleep sleep ATM0H\r 59.03 1060) DEBUG: Call failed: 2 (Dial failed) 59.04 1087) DEBUG: usysdep_detach: Forked; old PID 1060, new pid 1087 59.04 1087) DEBUG: fsysdep_get_work_init: Found C.NVMzzTJAAAOl 59.04 1087) DEBUG: fconn_open: Opening port ACU (default speed) Thanks for any tips, Eugene Sevinian CRD, YerPhI, 375036, Armenia Phone: 374-2-344873
setfont; bo, hamm, slink
Hi all, Recently I am doing some job with console fonts and it turned that after running $setfont some-font $setfont the mc and some other programs are losing the pseudographic characters which are used to draw frames, borders etc. Instead pseudographic symbols the 'q', 'x' and other leters are appearing on the screen. At the same time everything is correct on the BO. I would like to know is it fixed in slink. Thanks, Eugene Sevinian CRD, YerPhI, 375036, Armenia Phone: 374-2-344873
Re: sorting russian text
On 22 Nov 1998, Torsten Hilbrich wrote: On: 20 Nov 1998 20:58:52 +0100 Ole J Tetlie writes: | I have checked my sort command (version 1.22) for the value de_DE | for LANG and it didn't work either. | | I checked the documentation for both sort and the fileutils and | couldn't find any mentioning of locale support. So it seems to me | that it is simply not supported. I also wrote a small test using both strcoll and strcmp, and they gave the same result in all cases (with no_NO). Perhaps libc is at fault. The locales need to be enabled using the setlocale(3) function. BTW, there is such string in sort.c: setlocale (LC_ALL, ); However, it seems that it is not enough :( Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
console fonts
HI, there are 3 kind of files in /usr/share/consolefonts: *psf, *.cp and without extention. What is the difference among them? As I understand the conventional format is PSF. Am I right? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
sorting russian text
Hi, As I am working now on a multilingual text proccesing system I tried to use 'sort' for this purpose. From man bash I have read that the LANG variabale is responsible for local language setting. Assuming ru_RU is appropriate variable I set LANG=ru_RU; export LANG, but :(( nothing had changed at all. Should I do something else? Help me, please! TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
1st time configuring samba
Hi all, I am trying to configure samba following smb.conf comments but can not understand where should I look for BROWSING.txt according to which I have to set some parameters. I looked at w95 side by in vain, the same with linux. TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
how to create new console fonts?
Hi all, I need new fonts for console but I do not know how it is possible to create them. I was unlucky and did not find any source of information concerning this staff.My native language (Armenian) only supported under X which is not enough for me. Unfortunatly I did not found any tips in the debian-i18n list archive. Hope, someone will be able to help me. TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
understanding keyboard.map
Hi all, as I underestand the basics of keyboard.map files format then if I have the following string string F10 = \033[12;2] then pressing F10 should send escape sequences. However I am getting only beep +12;2] instead of correct action (in this case switching console). Hope that someone whould be able to help me. Any points to detailed information concerning this subject ( I mean assigning arbitrary function to different keys under non-x console) are welcomed. TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: Linux on 4Mb
Once I did it with BO. All installation was done on another PC with 32M but after that the harddrive was placed on machine with only 4MB ROM and it was ok. On 27 Oct 1998, Bostjan JERKO wrote: Is it possible to install Linux on machine with 4 Mb and of course it should work. Bostjan Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
ZMODEM: Resume file transfer
Hi, I would like to know why file transfering via diffrent terminal programs like minicom, hyperterm (w95) with option -r does not work for me. I use sz -br command on server side, while having the rz -vvrC in minicom config file as a zmodem command. I am getting something like that: Receiving: myfile lrz: myfile exists lrz: caught signal -1; exiting Transfer complete. READY: press any key to continue... TIA for any tips, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
NLS warnings at boot time
Hi, after apgrading to hamm Im getting this kind of messages each time during linux boot. What all this means? Is something wrong? TIA, Eugene. Unable to load NLS charset cp437(nls_cp437) Unable to load NLS charset iso8859-1(nls_iso8859_1) Unable to load NLS charset cp437(nls_cp437) Unable to load NLS charset iso8859-1(nls_iso8859_1) Unable to load NLS charset cp437(nls_cp437) Unable to load NLS charset iso8859-1(nls_iso8859_1) CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: wierd problem with ppp; need help!
Hello, Thanks for replying. I simply trying do not spam this list by long messages. Ok, the problem is that after upgrading to hamm on client michine I am unable to establish reliable ppp link with server which is running BO. At the same time everything is fine when I use ppp wrom w95 which is co-exist on the same client machine. Below the different information is presented regarding this problem. In order to get live example of logs I had run 'pon test' and tried to telnet to peer but hang at login during entering password. From another xterm ping-ing gave no results at all. This is the typical picture after upgating to hamm (sometime it is possible to run a pair of commands after loging in). Contents: - /etc/ppp/peers/test - /etc/ppp/options - outputs of ping, ifconfig, netstat -r - /var/log/ppp.log - /var/log/ppp.log (from server side) (Remark: All stared localremote IPs was correct) /etc/ppp/peers/test: noauth #pppconfig_noauth connect /usr/sbin/chat -v -f /etc/chatscripts/test #pppconfig_connect debug #pppconfig_debug /dev/ttyS1 #pppconfig_dev 115200 #pppconfig_speed defaultroute #pppconfig_route 194.*.*.*:194.*.*.* #pppconfig_ipdefault user sevinian #pppconfig_user /etc/ppp/options: asyncmap 0 auth crtscts lock modem proxyarp lcp-echo-interval 30 /* I also tried to comment out lcp-echo-failure 4 this to strings, but in vain */ noipx crdppp.root:~$ ping 194.*.*.* PING 194.*.*.* (194.*.*.*): 56 data bytes --- 194.67.208.105 ping statistics --- 22 packets transmitted, 0 packets received, 100% packet loss crdppp.root:~$ ifconfig loLink encap:Local Loopback inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 Collisions:0 ppp0 Link encap:Point-to-Point Protocol inet addr:194.*.*.* P-t-P:194.*.*.* Mask:255.255.255.0 UP POINTOPOINT RUNNING MTU:542 Metric:1 RX packets:31 errors:14 dropped:14 overruns:0 frame:0 TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 Collisions:0 Memory:1620830-1620c80 crdppp.root:~$ netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 194.*.*.* * 255.255.255.255 UH 542 0 0 ppp0 localnet* 255.0.0.0 U 3584 0 0 lo default 194.*.*.* 0.0.0.0 UG 542 0 0 ppp0 /var/log/ppp.log (Remark: local/remote IPs are OK) Oct 14 00:14:53 crdppp pppd[260]: Serial connection established. Oct 14 00:14:54 crdppp pppd[260]: Using interface ppp0 Oct 14 00:14:54 crdppp pppd[260]: Connect: ppp0 -- /dev/ttyS1 Oct 14 00:14:54 crdppp pppd[260]: sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0x20c2 pcomp accomp] Oct 14 00:14:54 crdppp pppd[260]: rcvd [LCP ConfReq id=0x1 mru 542 asyncmap 0x0 auth pap magic 0x21a79b3f pcomp accomp] Oct 14 00:14:54 crdppp pppd[260]: sent [LCP ConfAck id=0x1 mru 542 asyncmap 0x0 auth pap magic 0x21a79b3f pcomp accomp] Oct 14 00:14:57 crdppp pppd[260]: sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0x20c2 pcomp accomp] Oct 14 00:14:57 crdppp pppd[260]: rcvd [LCP ConfAck id=0x1 asyncmap 0x0 magic 0x20c2 pcomp accomp] Oct 14 00:14:57 crdppp pppd[260]: sent [LCP EchoReq id=0x0 magic=0x20c2] Oct 14 00:14:57 crdppp pppd[260]: sent [PAP AuthReq id=0x1 user=sevinian password=*] Oct 14 00:14:57 crdppp pppd[260]: rcvd [LCP EchoRep id=0x0 magic=0x21a79b3f] Oct 14 00:14:57 crdppp pppd[260]: rcvd [PAP AuthAck id=0x1 Login ok] Oct 14 00:14:57 crdppp pppd[260]: Remote message: Login ok Oct 14 00:14:57 crdppp pppd[260]: sent [IPCP ConfReq id=0x1 addr 194.*.*.* compress VJ 0f 01] Oct 14 00:14:57 crdppp pppd[260]: rcvd [IPCP ConfReq id=0x1 addr 194.*.*.* compress VJ 0f 01] Oct 14 00:14:57 crdppp pppd[260]: sent [IPCP ConfAck id=0x1 addr 194.*.*.* compress VJ 0f 01] Oct 14 00:14:57 crdppp pppd[260]: rcvd [IPCP ConfAck id=0x1 addr 194.*.*.* compress VJ 0f 01] Oct 14 00:14:57 crdppp pppd[260]: Cannot determine ethernet address for proxy ARP Oct 14 00:14:57 crdppp pppd[260]: local IP address 194.*.*.* Oct 14 00:14:57 crdppp pppd[260]: remote IP address 194.*.*.* Oct 14 00:15:27 crdppp pppd[260]: sent [LCP EchoReq id=0x1 magic=0x20c2] Oct 14 00:15:27 crdppp pppd[260]: rcvd [LCP EchoRep id=0x1 magic=0x21a79b3f] Oct 14 00:15:57 crdppp pppd[260]: sent [LCP EchoReq id=0x2 magic=0x20c2] Oct 14 00:15:57 crdppp pppd[260]: rcvd [LCP EchoRep id=0x2 magic=0x21a79b3f] Oct 14 00:16:27 crdppp pppd[260]: sent [LCP EchoReq
Re: wierd problem with ppp; need help!
Hi All, Up to now I did not solved this damned problem. : Does it worse to upgrade ppp to slink or ... downgrade it to BO (if it is possible)? Any idea? Thanks, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: wierd problem with ppp; need help!
00:17:27 crdppp pppd[260]: sent [LCP EchoReq id=0x5 magic=0x20c2] Oct 14 00:17:42 crdppp pppd[260]: rcvd [LCP EchoReq id=0x0 magic=0x21a79b3f] Oct 14 00:17:42 crdppp pppd[260]: sent [LCP EchoRep id=0x0 magic=0x20c2] Oct 14 00:17:57 crdppp pppd[260]: sent [LCP EchoReq id=0x6 magic=0x20c2] Oct 14 00:18:27 crdppp pppd[260]: No response to 4 echo-requests Oct 14 00:18:27 crdppp pppd[260]: Serial link appears to be disconnected. Oct 14 00:18:27 crdppp pppd[260]: sent [LCP TermReq id=0x2 Peer not responding] Oct 14 00:18:30 crdppp pppd[260]: sent [LCP TermReq id=0x3 Peer not responding] Oct 14 00:18:33 crdppp pppd[260]: Connection terminated. Oct 14 00:18:33 crdppp pppd[260]: Hangup (SIGHUP) Oct 14 00:18:33 crdppp pppd[260]: Exit. --- Here is ppp.log from server side of the same session: Oct 14 00:49:27 crdlx2 pppd[8064]: pppd 2.2.0 started by root, uid 0 Oct 14 00:49:27 crdlx2 pppd[8064]: Using interface ppp0 Oct 14 00:49:27 crdlx2 pppd[8064]: Connect: ppp0 -- /dev/ttyS1 Oct 14 00:49:27 crdlx2 pppd[8064]: sent [LCP ConfReq id=0x1 mru 542 asyncmap$ Oct 14 00:49:27 crdlx2 pppd[8064]: rcvd [LCP ConfAck id=0x1 mru 542 asyncmap$ Oct 14 00:49:30 crdlx2 pppd[8064]: rcvd [LCP ConfReq id=0x1 asyncmap 0x0 mag$ Oct 14 00:49:30 crdlx2 pppd[8064]: sent [LCP ConfAck id=0x1 asyncmap 0x0 mag$ Oct 14 00:49:30 crdlx2 pppd[8064]: rcvd [LCP EchoReq id=0x0 00 00 35 27] Oct 14 00:49:30 crdlx2 pppd[8064]: sent [LCP EchoRep id=0x0 b8 e1 36 45] Oct 14 00:49:30 crdlx2 pppd[8064]: rcvd [PAP AuthReq id=0x1 user=sevinian pas$ Oct 14 00:49:30 crdlx2 pppd[8064]: user sevinian logged in Oct 14 00:49:30 crdlx2 pppd[8064]: sent [PAP AuthAck id=0x1msg=Login ok] Oct 14 00:49:30 crdlx2 pppd[8064]: sent [IPCP ConfReq id=0x1 addr 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: sent [PAP AuthAck id=0x1msg=Login ok] Oct 14 00:49:30 crdlx2 pppd[8064]: sent [IPCP ConfReq id=0x1 addr 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: rcvd [IPCP ConfReq id=0x1 addr 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: sent [IPCP ConfAck id=0x1 addr 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: rcvd [IPCP ConfAck id=0x1 addr 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: local IP address 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: remote IP address 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: found interface eth0 for proxy arp Oct 14 00:50:00 crdlx2 pppd[8064]: rcvd [LCP EchoReq id=0x1 00 00 35 27] Oct 14 00:50:00 crdlx2 pppd[8064]: sent [LCP EchoRep id=0x1 b8 e1 36 45] Oct 14 00:50:49 crdlx2 pppd[8064]: Hangup (SIGHUP) Oct 14 00:50:49 crdlx2 pppd[8064]: Modem hangup Oct 14 00:50:49 crdlx2 pppd[8064]: Connection terminated. Oct 14 00:50:49 crdlx2 pppd[8064]: Exit. Oct 14 00:50:49 crdlx2 pppd[8265]: Hangup (SIGHUP) --- Thanks forward, Eugene. On Mon, Oct 12, 1998 at 12:36:25AM +0400, Eugene Sevinian wrote: Hi all, recently I have upgrated to hamm on my home computer which is running also w95. After that I have got broken ppp from linux side while everything is ok from w95 :(((. Therer where no such problems with bo. Speaking more definitly .. it looks like connection hang very soon at the beginnig of session. Sometimes I even unable to input password. As the phone line is noisy it seems that linux-ppp (from hamm) is more sensitive to it. However, I hate this possibility. Are ther any other ideas? At this point I am quite lost :((( TIA, Eugene Sevinian
Re: wierd problem with ppp; need help!
On 19 Oct 1998 [EMAIL PROTECTED] wrote: Eugene Sevinian writes: /etc/ppp/options: asyncmap 0 auth crtscts lock modem proxyarp lcp-echo-interval 30 lcp-echo-failure 4 noipx Try commenting out lcp-echo-interval and lcp-echo-failure. If that helps, puth them back in and experiment with different values for lcp-echo-failure. No, this didn't help. Any other idea? -- John HaslerThis posting is in the public domain. [EMAIL PROTECTED]Do with it what you will. Dancing Horse Hill Make money from it if you can; I don't mind. Elmwood, Wisconsin Do not send email advertisements to this address. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: wierd problem with ppp; need help!
On 19 Oct 1998 [EMAIL PROTECTED] wrote: No, this didn't help. Any other idea? No, but if you send me a copy of the log you get with those options commented out I'll try to generate some. I am ready to provide any info concerning this PPP. Here is log from client side after disabling LCP echos on that (client) side: (BTW , commenting iut these options on server side also did not change anything.) Oct 20 01:31:58 crdppp pppd[369]: pppd 2.3.5 started by sevinian, uid 1000 Oct 20 01:31:59 crdppp chat[371]: abort on (BUSY) Oct 20 01:31:59 crdppp chat[371]: abort on (NO CARRIER) Oct 20 01:31:59 crdppp chat[371]: abort on (VOICE) Oct 20 01:31:59 crdppp chat[371]: abort on (NO DIALTONE) Oct 20 01:31:59 crdppp chat[371]: abort on (NO ANSWER) Oct 20 01:31:59 crdppp chat[371]: send (ATZ^M) Oct 20 01:31:59 crdppp chat[371]: expect (OK) Oct 20 01:31:59 crdppp chat[371]: ATZ^M^M Oct 20 01:31:59 crdppp chat[371]: OK Oct 20 01:31:59 crdppp chat[371]: -- got it Oct 20 01:31:59 crdppp chat[371]: send (ATDP353197^M) Oct 20 01:31:59 crdppp chat[371]: expect (CONNECT) Oct 20 01:31:59 crdppp chat[371]: ATZ^M^M Oct 20 01:31:59 crdppp chat[371]: OK Oct 20 01:31:59 crdppp chat[371]: -- got it Oct 20 01:31:59 crdppp chat[371]: send (ATDP353197^M) Oct 20 01:31:59 crdppp chat[371]: expect (CONNECT) Oct 20 01:31:59 crdppp chat[371]: ^M Oct 20 01:32:24 crdppp chat[371]: ATDP353197^M^M Oct 20 01:32:24 crdppp chat[371]: CONNECT Oct 20 01:32:24 crdppp chat[371]: -- got it Oct 20 01:32:24 crdppp chat[371]: send (\d) Oct 20 01:32:25 crdppp pppd[369]: Serial connection established. Oct 20 01:32:26 crdppp pppd[369]: Using interface ppp0 Oct 20 01:32:26 crdppp pppd[369]: Connect: ppp0 -- /dev/ttyS2 Oct 20 01:32:30 crdppp pppd[369]: Remote message: Login ok Oct 20 01:32:30 crdppp pppd[369]: Cannot determine ethernet address for proxy A$ Oct 20 01:32:30 crdppp pppd[369]: local IP address 194.*.*.* Oct 20 01:32:30 crdppp pppd[369]: remote IP address 194.*.*.* Oct 20 01:36:53 crdppp pppd[369]: Terminating on signal 15. Oct 20 01:36:59 crdppp pppd[369]: Connection terminated. Oct 20 01:36:59 crdppp pppd[369]: Hangup (SIGHUP) Oct 20 01:37:00 crdppp pppd[369]: Exit. ... and from the server side as well: Oct 20 01:33:15 crdlx2 pppd[5698]: pppd 2.2.0 started by root, uid 0 Oct 20 01:33:15 crdlx2 pppd[5698]: Using interface ppp0 Oct 20 01:33:15 crdlx2 pppd[5698]: Connect: ppp0 -- /dev/ttyS1 Oct 20 01:33:15 crdlx2 pppd[5698]: sent [LCP ConfReq id=0x1 mru 542 asyncmap$ Oct 20 01:33:15 crdlx2 pppd[5698]: rcvd [LCP ConfAck id=0x1 mru 542 asyncmap$ Oct 20 01:33:18 crdlx2 pppd[5698]: rcvd [LCP ConfReq id=0x1 asyncmap 0x0 mag$ Oct 20 01:33:18 crdlx2 pppd[5698]: sent [LCP ConfAck id=0x1 asyncmap 0x0 mag$ Oct 20 01:33:18 crdlx2 pppd[5698]: rcvd [PAP AuthReq id=0x1 user=sevinian pas$ Oct 20 01:33:18 crdlx2 pppd[5698]: user sevinian logged in Oct 20 01:33:18 crdlx2 pppd[5698]: sent [PAP AuthAck id=0x1msg=Login ok] Oct 20 01:33:18 crdlx2 pppd[5698]: sent [IPCP ConfReq id=0x1 addr 194.*.*.1$ Oct 20 01:33:19 crdlx2 pppd[5698]: rcvd [IPCP ConfReq id=0x1 addr 194.*.*.1$ Oct 20 01:33:19 crdlx2 pppd[5698]: sent [IPCP ConfAck id=0x1 addr 194.*.*.1$ Oct 20 01:33:19 crdlx2 pppd[5698]: rcvd [IPCP ConfAck id=0x1 addr 194.*.*.1$ Oct 20 01:33:19 crdlx2 pppd[5698]: local IP address 194.*.*.105 Oct 20 01:33:19 crdlx2 pppd[5698]: remote IP address 194.*.*.110 Oct 20 01:33:19 crdlx2 pppd[5698]: found interface eth0 for proxy arp Oct 20 01:34:16 crdlx2 pppd[5698]: sent [LCP EchoReq id=0x0 1a d6 71 b0] Oct 20 01:34:16 crdlx2 pppd[5698]: rcvd [LCP EchoRep id=0x0 00 00 6e b7] Oct 20 01:35:30 crdlx2 pppd[5698]: sent [LCP EchoReq id=0x1 1a d6 71 b0] Oct 20 01:36:30 crdlx2 pppd[5698]: sent [LCP EchoReq id=0x2 1a d6 71 b0] Oct 20 01:37:30 crdlx2 pppd[5698]: sent [LCP EchoReq id=0x3 1a d6 71 b0] Oct 20 01:37:48 crdlx2 pppd[5698]: Hangup (SIGHUP) Oct 20 01:37:48 crdlx2 pppd[5698]: Modem hangup Oct 20 01:37:48 crdlx2 pppd[5698]: Connection terminated. Oct 20 01:37:48 crdlx2 pppd[5698]: Exit. Oct 20 01:37:48 crdlx2 pppd[6067]: Hangup (SIGHUP) -- John Hasler [EMAIL PROTECTED] (John Hasler) Dancing Horse Hill Elmwood, WI -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: wierd problem with ppp; need help!
00:17:27 crdppp pppd[260]: sent [LCP EchoReq id=0x5 magic=0x20c2] Oct 14 00:17:42 crdppp pppd[260]: rcvd [LCP EchoReq id=0x0 magic=0x21a79b3f] Oct 14 00:17:42 crdppp pppd[260]: sent [LCP EchoRep id=0x0 magic=0x20c2] Oct 14 00:17:57 crdppp pppd[260]: sent [LCP EchoReq id=0x6 magic=0x20c2] Oct 14 00:18:27 crdppp pppd[260]: No response to 4 echo-requests Oct 14 00:18:27 crdppp pppd[260]: Serial link appears to be disconnected. Oct 14 00:18:27 crdppp pppd[260]: sent [LCP TermReq id=0x2 Peer not responding] Oct 14 00:18:30 crdppp pppd[260]: sent [LCP TermReq id=0x3 Peer not responding] Oct 14 00:18:33 crdppp pppd[260]: Connection terminated. Oct 14 00:18:33 crdppp pppd[260]: Hangup (SIGHUP) Oct 14 00:18:33 crdppp pppd[260]: Exit. --- Here is ppp.log from server side of the same session: Oct 14 00:49:27 crdlx2 pppd[8064]: pppd 2.2.0 started by root, uid 0 Oct 14 00:49:27 crdlx2 pppd[8064]: Using interface ppp0 Oct 14 00:49:27 crdlx2 pppd[8064]: Connect: ppp0 -- /dev/ttyS1 Oct 14 00:49:27 crdlx2 pppd[8064]: sent [LCP ConfReq id=0x1 mru 542 asyncmap$ Oct 14 00:49:27 crdlx2 pppd[8064]: rcvd [LCP ConfAck id=0x1 mru 542 asyncmap$ Oct 14 00:49:30 crdlx2 pppd[8064]: rcvd [LCP ConfReq id=0x1 asyncmap 0x0 mag$ Oct 14 00:49:30 crdlx2 pppd[8064]: sent [LCP ConfAck id=0x1 asyncmap 0x0 mag$ Oct 14 00:49:30 crdlx2 pppd[8064]: rcvd [LCP EchoReq id=0x0 00 00 35 27] Oct 14 00:49:30 crdlx2 pppd[8064]: sent [LCP EchoRep id=0x0 b8 e1 36 45] Oct 14 00:49:30 crdlx2 pppd[8064]: rcvd [PAP AuthReq id=0x1 user=sevinian pas$ Oct 14 00:49:30 crdlx2 pppd[8064]: user sevinian logged in Oct 14 00:49:30 crdlx2 pppd[8064]: sent [PAP AuthAck id=0x1msg=Login ok] Oct 14 00:49:30 crdlx2 pppd[8064]: sent [IPCP ConfReq id=0x1 addr 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: sent [PAP AuthAck id=0x1msg=Login ok] Oct 14 00:49:30 crdlx2 pppd[8064]: sent [IPCP ConfReq id=0x1 addr 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: rcvd [IPCP ConfReq id=0x1 addr 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: sent [IPCP ConfAck id=0x1 addr 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: rcvd [IPCP ConfAck id=0x1 addr 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: local IP address 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: remote IP address 194.*.*.* Oct 14 00:49:30 crdlx2 pppd[8064]: found interface eth0 for proxy arp Oct 14 00:50:00 crdlx2 pppd[8064]: rcvd [LCP EchoReq id=0x1 00 00 35 27] Oct 14 00:50:00 crdlx2 pppd[8064]: sent [LCP EchoRep id=0x1 b8 e1 36 45] Oct 14 00:50:49 crdlx2 pppd[8064]: Hangup (SIGHUP) Oct 14 00:50:49 crdlx2 pppd[8064]: Modem hangup Oct 14 00:50:49 crdlx2 pppd[8064]: Connection terminated. Oct 14 00:50:49 crdlx2 pppd[8064]: Exit. Oct 14 00:50:49 crdlx2 pppd[8265]: Hangup (SIGHUP) --- Thanks forward, Eugene. On Mon, Oct 12, 1998 at 12:36:25AM +0400, Eugene Sevinian wrote: Hi all, recently I have upgrated to hamm on my home computer which is running also w95. After that I have got broken ppp from linux side while everything is ok from w95 :(((. Therer where no such problems with bo. Speaking more definitly .. it looks like connection hang very soon at the beginnig of session. Sometimes I even unable to input password. As the phone line is noisy it seems that linux-ppp (from hamm) is more sensitive to it. However, I hate this possibility. Are ther any other ideas? At this point I am quite lost :((( TIA, Eugene Sevinian
wierd problem with ppp; need help!
Hi all, recently I have upgrated to hamm on my home computer which is running also w95. After that I have got broken ppp from linux side while everything is ok from w95 :(((. Therer where no such problems with bo. Speaking more definitly .. it looks like connection hang very soon at the beginnig of session. Sometimes I even unable to input password. As the phone line is noisy it seems that linux-ppp (from hamm) is more sensitive to it. However, I hate this possibility. Are ther any other ideas? At this point I am quite lost :((( TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
telnet localhost
Hi, After uprgating to hamm it is immposiible to telnet,talk to local host. All services are allowed via hosts.allow/hosts.deny but nevetheless I am getting: Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused What is wrong? As I remeber it was ok on bo :( TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: telnet localhost (still isn't working)
Hi again, I was advised to check inet.conf but it seems that everything is ok with telnet entry in that file. Here it is: telnet stream tcp nowait root /usr/sbin/tcpd /usr/sbin/in.telnetd Also there is a string 127.0.0.1 localhost in /etc/hosts and ALL: ALL in hosts.allow. ping to localhost is working, but telnet,ftp,talk aren't. Is there any idea? Thanks, Eugene. Hi, After uprgating to hamm it is immposiible to telnet,talk to local host. All services are allowed via hosts.allow/hosts.deny but nevetheless I am getting: Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused What is wrong? As I remeber it was ok on bo :( TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
pap-secrets
Hi All, Playing with ppp I have found that It is impossible to connect from w95 box into linux if there exist /etc/pap/pap-secrets file. Everything is ok when I delete this file. It looks like w95 can not use PAP. Is it true? Or there are possible errors in /etc/ppp/options? As I understand the main propose of pap-secrets is to restrict some users to login via ppp. How can I impose these restrictions without secrets?? Any tips? Below some info which might help to understand what is going on. Thanks, Eugene Here is fragment from ppp.log: Connect: ppp0 -- /dev/ttyS1 sent [LCP ConfReq id=0x1 mru 542 asyncmap 0x0 auth pap magic 0xe5ad3246] rcvd [LCP ConfAck id=0x1 mru 542 asyncmap 0x0 auth pap magic 0xe5ad3246] rcvd [LCP ConfReq id=0x3 asyncmap 0xa magic 0x1a4e86 pcomp accomp ] sent [LCP ConfRej id=0x3 0d 03 06] sent [LCP ConfReq id=0x1 mru 542 asyncmap 0x0 auth pap magic 0xe5ad3246] rcvd [LCP ConfReq id=0x4 asyncmap 0xa magic 0x1a4e86 pcomp accomp] sent [LCP ConfAck id=0x4 asyncmap 0xa magic 0x1a4e86 pcomp accomp] rcvd [LCP ConfAck id=0x1 mru 542 asyncmap 0x0 auth pap magic 0xe5ad3246] rcvd [PAP AuthReq id=0x1 user=sevinian password=mypasswd] PAP authentication failure for sevinian sent [PAP AuthNak id=0x1msg=Login incorrect] sent [LCP TermReq id=0x2] rcvd [LCP TermAck id=0x2] Connection terminated. /etc/ppp/options: dns-addr 194.x.x.x asyncmap 0 auth crtscts lock modem mru 542 +pap debug domain yerphi.am remotename xyz proxyarp login lcp-echo-interval 60 lcp-echo-failure 4 pap-restart 3 pap-max-authreq 3 /etc/ppp/pap-secrets: * xyz Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: pap-secrets
Hi again, I tried to add an '*' as a fourth field, but results remains thee same. I got bla-bla check your password. However, thanks for your advice. Is there any other ideas? Eugene. On Tue, 6 Oct 1998, Jens B. Jorgensen wrote: The new ppp requires that you have a fourth field for acceptable IP addresses. Also, you *must* have an entry in pap-secrets (a wildcard entry at least) even if you're authenticating against your regular password database (as your options shows you are). Just put in '*' as the fourth field of the appropriate entry in pap-secrets and you should be good. Eugene Sevinian wrote: Hi All, Playing with ppp I have found that It is impossible to connect from w95 box into linux if there exist /etc/pap/pap-secrets file. Everything is ok when I delete this file. It looks like w95 can not use PAP. Is it true? Or there are possible errors in /etc/ppp/options? As I understand the main propose of pap-secrets is to restrict some users to login via ppp. How can I impose these restrictions without secrets??
access to iso9660 raw image
Hi All, Today a friend of mine gave me a CD with raw binary image of hamm on it. MD5 sum is correct. Would it be possible to use this CD as a hamm distribution without burning new CD. May be using loopback device or something like that? Any help is greatly appreciated. Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
^X in pine; from w95
Hi All, It seems that this is not a debian prolem, but I hope someone would be able to help me. There is a win95 box connected to my debian via ppp by mean of an old 1200 modem. During telnet session it is impossible to send mails in pine pressing ^X. Instead it sends only one 'x' symbol. The same with other CTRL+? keys. Terminal set to vt100 in telnet settings. So I can't figure out what the matter. From ppp.log it is seen that asyncmap is 0xa which is same when the situation is ok ( I mean connection from another w95 machine ). Thanks in advance for any help, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: Install lilo on new disk/new partition
However, lilo fails still, with a message, First sector of /dev/hda1 doesn't have a valid boot signature Changing boot device from /dev/hda1 to /dev/hda hopefully will help you. I found this message in the lilo manual, but I cannot see how to fix it. I ran liloconfig, which I hope was not a mistake. I toggled the flag again. No change to this message. Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
Re: big file problem
On Wed, 19 Aug 1998, Robert Wilderspin wrote: On 19 Aug 98 16:51:37 GMT, [EMAIL PROTECTED] wrote: Hi All, today I have changed the harddisk on my PC from 1.1G to ~4G WD Caviar 24300. I was quite happy when I have got running system by simply 'cp from_old_disk to_new_disk'. Everything was fine until I tried to work with big files (~400M). First I used 'dd' to make copy but system hungs at some point. Then I decided to use 'cp' and I got a lot of horrible messages about disk errors. As I remember, during 'mkfs.ext2 -c /dev/hdx' there was only read only testing. Is there any way to do read/write test? Or, may there are other idea about this problem? The best way I know to perform a direct copy of one disk to another is the following: cd / find . -xdev -print | cpio -padm /mnt Where you're copying everything from the root filesystem downwards, including mount points (but not their contents), onto a filesystem mounted at /mnt. It seems that system is working fine. Bad things occur when I copy big file on separate partition (/home). Thats why my main at this point concern is to perform readwrite testing of harddisk. Unfortunatly I don't know which utilites I should use for this propose. Tthanks for any advice, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
big file problem
Hi All, today I have changed the harddisk on my PC from 1.1G to ~4G WD Caviar 24300. I was quite happy when I have got running system by simply 'cp from_old_disk to_new_disk'. Everything was fine until I tried to work with big files (~400M). First I used 'dd' to make copy but system hungs at some point. Then I decided to use 'cp' and I got a lot of horrible messages about disk errors. As I remember, during 'mkfs.ext2 -c /dev/hdx' there was only read only testing. Is there any way to do read/write test? Or, may there are other idea about this problem? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
multiple PPP
Hi Debians, I am running w95 at home , and recently I tried to configure multiple ppp connection from that machine to different Linux boxes in different domains. As I understand there is no chance to configure network parameters in w95 depending on connection (Am I right?). Is there any way to assign hostname, DNS server from linux side? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873
multiple PPP
Hi Debians, I am running w95 at home , and recently I tried to configure multiple ppp connection from that machine to different Linux boxes in different domains. As I understand there is no chance to configure network parameters in w95 depending on connection (Am I right?). Is there any way to assign hostname, DNS server from linux side at the? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873
multi dialing solution
Hi Debians, Sometimes it is difficult for me to decide does my question fit to this mailing list. This time I also have such feelings... However, here is my question(s). I want to gather some info abbout possible hardawre/software solution about using linux for comunications via modem (or modems like devices) when only one incoming phone number is available. What are the standart ways of spliting the channel's bandwich, to allow accept many calls at the same time. Thanks forward for any tpis, points, idea... Regards, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
hamm or slink
Hi, Recently I had a plan to download hamm to usu on my lab's PCs but infortunalti things go into the bad direction. There are chances that I will not be able to ftp very often. So I rashed into dillema 1. I can do know with hamm cd images or 2. ...jumpt to slink because of apt, kde and propably more good stuff. To go in this direction I would like to know about possible difficultis with this unstable version. If there are no too much problems it doesn't worse to spend time on hamm in this situation. My main tasks are: creation of nice Xdesktop, running WWW server, dialup connection and Debian promotion. TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
simple Q.
HI, I downloaded one of the CD images and now I would like to check CHECKSUM. sumcksum commands give definitly another values, not hex but decimal. How should I check it? Thanks, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
installing adbbs
I tried to install adbbs on my Debian 1.3.1 at home. Here is what I got as a first message: $ adbbs Can't locate loadable object for module Term::ReadKey in @INC (@INC contains: /usr/lib/perl5/i386-linux/5.004 /usr/lib/perl5 /usr/local/lib/site_perl/i386-linux /usr/local/lib/site_perl .) at /usr/lib/perl5/bbs-lib.pl line 10 BEGIN failed--compilation aborted at /usr/lib/perl5/bbs-lib.pl line 10. Would be obliged if someone can say what should I do. Thanks, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: How to clone debian system to another hard drive
Hi Tom, I have read from this mini-howto (point 4.) the following: ...(Note: Contrary to what the man page states, the command mkfs -t ext2 -c /dev/hdb1 doesn't check for bad blocks under any of Red Hat, Debian or Slackware.)... Is it true for Debian? On Fri, 31 Jul 1998, Tom Pfeifer wrote: Scott, It may help if you read over this mini-HOWTO which covers this exact topic: http://sunsite.unc.edu/mdw/HOWTO/mini/Hard-Disk-Upgrade.html I've used the first copy method (with everything on one partition) many times with no problem. It also gives several other variations of how to copy depending on your setup. One thing to check is if you have a /proc directory on the new disk, because you usually need to do that manually. Tom Scott Hill wrote: I am quite a beginner. I am trying to make a clone of my hamm (disk A) to another [...] Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
BIOS setting via software
Hi, Is there any linux stuff by which means it would be possible to change bios settings (particularly boot sequences etc) ? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
tools for downloading complex pages
Hi, I would like to khow is it possible to download files from www-pages which contain menu driven dialogs. Is there are any tools available for such propose (like wget)? Would be obliged for any tips, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
[OUT OFF SUBJECT] microsoft support linux
They decided to write a program for some unix platforms. Look at http://www.microsoft.com/windows/mediaplayer/download/unix.htm Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Win 95 and NT
You can boot linux via loadlin from w95. On Sat, 25 Jul 1998, Darren Trott wrote: I am currently running 3 operating systems on a P200MMX, Win 95, Win NT Workstation and Win NT Server. If I install Debian Linux in it's own partition on this system, will it use the NT boot menu or trash my system and make the Windows OS inoperative? Darren Trott Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: your or redhat?
Few days ago I had a chance to compare redhat against debian. I had installed Debian 1.3 from CD on tiny configuration: ROM=4M, HD=120M, Monochroom Hercules, Cyrix 486DX, 50Mh. A friend of mine tried to do the same job with RH5.1 but was unable to install due to the lack of disk space, ROM size ... However, the instalation of basic system of debian was done on another PC. Might be this was a reason of such story? Regards, Eugene On Mon, 20 Jul 1998, Alexander wrote: im concidering putting linux on my system at home (who am i kiding? i will be putting linux on my system) but im kind of lost between the outdated info in various sources on which dist is going to help me. this is what i need: 1 easy installation (i.e. auto recognition) 2 robust/easy to use graphical enviroment such as in os2 what i need to know from you is why should i get your product instead of Redhat 5.1? thanks for the help ken Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-344873 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
KDE in deb format?
There are some wrong pointer to deb packages of KDE1.0 on www.kde.org. Anybody tried to get it from somewere and install? Does it works good? Eugene Sevinian Cosmic Ray Division Yerevan Physics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
ftp problem on Red Hat
Hi all! One my friend with REDHAT 5.0 have a problem with ftp. He run ftpshut to shutdown FTP Server don't know how to run it again. :) FTP Server is wu-ftpd 2.4.27 Clinet part is working properly. Have any idea? I not... :( TIA, Eugene Sevinian Cosmic Ray Division Yerevan Physics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: ftp problem on Red Hat
Solved. It was neccesary to Comment /etc/ftpd/ftpaccess file line: shutdown file Hi all! One my friend with REDHAT 5.0 have a problem with ftp. He run ftpshut to shutdown FTP Server don't know how to run it again. :) FTP Server is wu-ftpd 2.4.27 Clinet part is working properly. Eugene Sevinian Cosmic Ray Division Yerevan Physics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
1.3.0 to hamm
Hi, Though I had asked this before, however I did not received exact answers until now. The problem is that I have 1.3.0 version installed and I would like to know, should I upgrate it to 1.3.1 and then use autoup.sh for shifting to hamm or I can go directly to hamm? Thanks, Eugene Sevinian Cosmic Ray Division Yerevan Physics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Please clarify...
Hello, I just tried to look at this site (http://debian.vicnet.net.au), but in vain. Anybody knows other places with autoup.sh? Does it works good with 1.3.0? my preferred method for upgrading to hamm is: 1. download autoup.sh and the tarball from http://debian.vicnet.net.au/autoup [] as mentioned yesterday, i have used this method to successfully (and painlessly) upgrade dozens of systems to hamm. it works. craig Eugene Sevinian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
about K6 bug
Hi all, Recently, there were a lot of post in [EMAIL PROTECTED] concerning new K6 bug. Tests was done by 'crashme'. Here is excerption from Andreas Haumer [EMAIL PROTECTED] report. # OSCPU result 11 Linux-2.0 K6crash 0 Linux-2.0 K6no crash 0 Linux-2.1 K6crash 3 Linux-2.1 K6no crash 0 Linux-2.0 Pentium crash 6 Linux-2.0 Pentium no crash 1 Linux-2.0 K6unclear = Sincerly speaking I have now idea how cricual is this, but as far as I consider K6 as a choice for upgrating my PC, I would like to know how reliable is this assuming that I have no intention to run this testing program very often. Have someone experienced any serious proplem with this cpu? TIA, Eugene Sevinian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Debian and w95 after adding memory
Hi all, I just upgrated my PC to 32M which has only 8M before. Now I can run w95 only in safe mode. At the same time everything is OK with Debian! During the normal w95 mode I got nothing but blue screen with: Fatal exeption OE occured at 0028:C0026240 in VXD VFAT(01) + 73B9. Though I feel some kind of malicious joy, however I need to forth it to load in normal way. I mean as it was before, even it was abnormal :) Does someone have any glue? Thanks in advance, Eugene Sevinian Cosmic Ray Division Yerevan Physics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://crdlx5.yerphi.am/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
why insmod so active?
I noticed that insmod spends a lot of CPU time. There were no such things before . I'm using 2.0.30 kernel with 1.3.0 Debian. Here is the 1st string of top's output: root 190 89.0 1.4 0 848 324 236 ? R 5:15 /sbin/insmod -k -s /lib/modules/2.0.30/misc/lp.o lp Is there any idea? Thanks in advance. Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
XF86Setup uses good graphic mode but...
Hi all, Recently a friend of mine bought a PC with video card (IGS1682; InteGraphics System ). Though XF86Setup itself is able to recognize this card (i.e. switch into 640x480 or higher(?) ) but I had not proper choice in card selection menu. Therefore during startx session I have no normal graphic resolution (only 320/200 or smth like that) with generic VGA :(. Is there any way in such a situation? Thanks, Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: ppp configuring with dunc (solved)
Thanks, Richard! Now it works. After few attempts to modify old /root/.ppprc I have noticed that dunc replaced it by the short file with one option (defaultroute) and 2-3 strings as well. Then I just added this option in old (and valid) .ppprc file. Hope this will be fixed later. On Thu, 14 Aug 1997, Richard G. Roberto wrote: All of that output looks normal. Without more information, I'd say either hte system you're connecting to isn't correctly configured for proxy arp, or you're not using the peer as the default gateway, which you should. This used to be in the default /etc/ppp/options file, but I just noticed that its not in the latest one. You can grep for default in you *.ctn file(s) under ~/.dunc and see if defaultroute is getting set. If not, you can filre up dunc and go to Modify (then select next, OK, bla bla, select your connection) and go to Details. This should give you a bunch of settings to choose from. Choose defaultroute by arrowing down to it and pressing space bar. You may also want to arrow down to proxyarp and mark that as well, although that's only supposed to be for the server or peer side. It won't hurt anything to have it on though. If that doesn't change anything, check with the system administrator of the peer and see if there's a problem on the proxy arp server. By the way, I get the message about Cannot determine ethernet address for proxy ARP also, it doesn't affect my system though. Outside of this, I'm afraid I'm out of ideas. It was It :) Regards, Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: ppp configuring with dunc
On Mon, 4 Aug 1997, Richard G. Roberto wrote: -BEGIN PGP SIGNED MESSAGE- On Mon, 4 Aug 1997, Eugene Sevinian wrote: Hi all, few weeks ago I have installed Debian from self made CDs with 1.3.0a. It seems that everything was fine! [Exepting the fact when I did not find some nice lovely things like xman and xload] Now I am trying to configure ppp conection to my Debian machine at work. (I have already ppp conection from w95 working nice). At this point I use some scripts and files prepared by 'dunc'. After running 'dialup_connect' I am able to hear the tone from modem speaker during ~1 min but no pulse dialing at all. Although, I put debug option in command line string but I did not get any debug strings in /var/log.debug :( Following information might be usefull for understanding the situation. Thanks in advance for any help. Eugene. Here is what I am getting in /var/log/ppp/log: Aug 3 22:45:41 gdak pppd[146]: pppd 2.2.0 started by root, uid 0 Aug 3 22:45:42 gdak chat[147]: send (atdpm0343656^M) This send string is wrong. The version of dunc you are using is buggy. Please upgrade to version 2.2. This should be available in /debian/hamm/hamm/binary/admin, and its only 28k to download. Please use it to create a new connection and let me know if works better. Its easier to setup than previous versions, but you have to work a little harder to get your hands dirty. Its intended for users to not get their hands dirty, though. Thanks Richard G. Roberto Yes, this new version of dunc works better (thanks, Richard). But telnet , ping etc are still not working. It seems that something wrong with my network configuration. Here are some outputs which may help to understand what is the source of problem. Thanks in advance, Eugene. $ telnet 194.***.***.100 Trying 194.***.***.100... telnet: Unable to connect to remote host: Network is unreachable $ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1 RX packets:96 errors:0 dropped:0 overruns:0 TX packets:96 errors:0 dropped:0 overruns:0 ppp0Link encap:Point-Point Protocol inet addr:194.***.***.110 P-t-P:194.***.***.105 Mask:255.255.255.128 UP POINTOPOINT RUNNING MTU:542 Metric:1 RX packets:65 errors:1 dropped:1 overruns:0 TX packets:66 errors:0 dropped:0 overruns:0 ppp.log: Aug 13 23:38:50 gdak pppd[143]: pppd 2.2.0 started by root, uid 0 Aug 13 23:38:51 gdak chat[144]: send (atdp343656^M) Aug 13 23:38:51 gdak chat[144]: expect (CONNECT) Aug 13 23:39:19 gdak chat[144]: atdp343656^M^M Aug 13 23:39:19 gdak pppd[143]: Serial connection established. Aug 13 23:39:19 gdak chat[144]: CONNECT -- got it Aug 13 23:39:20 gdak pppd[143]: Using interface ppp0 Aug 13 23:39:20 gdak pppd[143]: Connect: ppp0 -- /dev/ttyS1 Aug 13 23:39:20 gdak pppd[143]: sent [LCP ConfReq id=0x1 mru 1500asyncmap 0x0 magic 0x5612ec12 pcomp accomp] Aug 13 23:39:21 gdak pppd[143]: rcvd [LCP ConfReq id=0x1 mru 542 asyncmap 0x0 auth pap magic 0xcc2a4f99 pcomp accomp] Aug 13 23:39:21 gdak pppd[143]: sent [LCP ConfAck id=0x1 mru 542 asyncmap 0x0 auth pap magic 0xcc2a4f99 pcomp accomp] Aug 13 23:39:23 gdak pppd[143]: sent [LCP ConfReq id=0x1 mru 1500 asyncmap 0x0 magic 0x5612ec12 pcomp accomp] Aug 13 23:39:23 gdak pppd[143]: rcvd [LCP ConfAck id=0x1 mru 1500 asyncmap 0x0 magic 0x5612ec12 pcomp accomp] Aug 13 23:39:23 gdak pppd[143]: sent [PAP AuthReq id=0x1 user=sevinian password=***] Aug 13 23:39:24 gdak pppd[143]: rcvd [PAP AuthAck id=0x1msg=Login ok] Aug 13 23:39:24 gdak pppd[143]: Remote message: Login okAug 13 23:39:24 gdak pppd[143]: sent [IPCP ConfReq id=0x1 addr 0.0.0.0 compress VJ 0f 01] Aug 13 23:39:24 gdak pppd[143]: rcvd [IPCP ConfReq id=0x1 addr 194.***.***.105 compress VJ 0f 01]Aug 13 23:39:24 gdak pppd[143]: sent [IPCP ConfAck id=0x1 addr 194.***.***.105 compress VJ 0f 01] Aug 13 23:39:24 gdak pppd[143]: rcvd [IPCP ConfNak id=0x1 addr 194.***.***.110] Aug 13 23:39:24 gdak pppd[143]: sent [IPCP ConfReq id=0x2 addr 194.***.***.110 compress VJ 0f 01] Aug 13 23:39:24 gdak pppd[143]: rcvd [IPCP ConfAck id=0x2 addr 194.***.***.110 compress VJ 0f 01] Aug 13 23:39:24 gdak pppd[143]: local IP address 194.***.***.110 Aug 13 23:39:24 gdak pppd[143]: remote IP address 194.***.***.105 Aug 13 23:39:24 gdak pppd[143]: Cannot determine ethernet address for proxy ARP Aug 13 23:39:51 gdak pppd[143]: sent [LCP EchoReq id=0x0 56 12 ec 12] Aug 13 23:39:51 gdak pppd[143]: rcvd [LCP EchoRep id=0x0 cc 2a 4f 99] Aug 13 23:40:21 gdak pppd[143]: sent [LCP EchoReq id=0x1 56 12 ec 12] etc. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
ppp configuring with dunc
Hi all,
few weeks ago I have installed Debian from self made CDs with 1.3.0a.
It seems that everything was fine! [Exepting the fact when I did not find
some nice lovely things like xman and xload]
Now I am trying to configure ppp conection to my Debian machine at work.
(I have already ppp conection from w95 working nice). At this point I use
some scripts and files prepared by 'dunc'. After running 'dialup_connect'
I am able to hear the tone from modem speaker during ~1 min but no pulse
dialing at all. Although, I put debug option in command line string but I
did not get any debug strings in /var/log.debug :(
Following information might be usefull for understanding the situation.
Thanks in advance for any help.
Eugene.
Here is what I am getting in /var/log/ppp/log:
Aug 3 22:45:41 gdak pppd[146]: pppd 2.2.0 started by root, uid 0
Aug 3 22:45:42 gdak chat[147]: send (atdpm0343656^M)
Aug 3 22:45:43 gdak chat[147]: expect (CONNECT)
Aug 3 22:46:28 gdak chat[147]: atdpm0343656^M
Aug 3 22:46:28 gdak pppd[146]: Connect script failed
Aug 3 22:46:28 gdak pppd[146]: Exit.
Aug 3 22:46:28 gdak chat[147]: alarm
Aug 3 22:46:28 gdak chat[147]: Failed
..
'dialup_connect' generated by 'dunc':
#!/bin/sh
# This is the PPP/SLIP command file created by dunc
#
# this is useful
die() {
echo $2
exit $1
}
#
# Let's check to see if we have a chat file
[ -f /root/.dunc/chatfile ] || die 1 no chat file, exiting ...
#
# If you want to get promted for your passwd each time you
# run this script, uncomment the line below and comment out the
# line begginning with passwd=
#stty -echo;printf %s Password: ;read passwd;stty echo
# If you want to store your passwd so you don't have to enter
# it all the time, comment out the line above begginning with
# stty -echo and uncomment the line below and add your passwd
passwd=$my_password
/bin/cat /root/.dunc/chatfile | /bin/sed -e 's/PWD/$passwd/g'
/tmp/wchatfile
/usr/sbin/pppd 194.***.***.***:194.***.***.*** debug file
/root/.dunc/options connect /usr/sbin/chat -v -f /tmp/wchatfile
/dev/ttyS1 19200
/bin/rm -f /tmp/wchatfile
...
/root/.dunc/options :
defaultroute
crtscts
-am
modem
proxyarp
-mru
lock
..
Eugene Sevinian
Cosmic Ray Division
Yerevan Phisics Institute
Alikhanian's Brothers str.2
375036 Yerevan 36
Armenia
URL: http://www.yerphi.am/crd/prs/sevinian.html
Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.)
Fax: 374-2-350030
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
frequently paused modem connection
I use USR14400 modem and it works fine with mgetty. The only bad thing which I noticed so far are the short pauses (~1-5 sec) during the sessions. Unfortunatly, to say the least of it, the quality of telephone lines is not very good. However I would like to know if there are some other (soft) reasons which can explain such a behavior. Many thanks in advance for any idea. With regards, Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
su: (to nobody) root on none
This string frequently appears in my auth.log. Does it mean that something wrong with security? Thanks in advance, Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Help with IP masquerading
Thanks for assistance! Following you advices I moved toward 1.3 and was happy to looking on upgrate without rebooting. It was great! On Mon, 26 May 1997, A. M. Varon wrote: On Mon, 26 May 1997, Hamish Moffatt wrote: Long answer: You have to say yes to the experimental drivers in order for the option ip masq to appear. kernel 2.0.27 partially supports ip masq, so you have to patch the kernel with some files to fully use it. If possible, get the kernel 2.0.30, the ip masq patches has been incorporated in the kernel as modules. Huh? Haven't all of 2.0.x supported this? I've been running it for months and months; 2.0.24, 27 and 29 definately all have it built in and I'd guess earlier than that too. It was only a patch in the 1.2.x and early 1.3.x days. The usual support for ip masq like the www,ftp,telnet,pop,smtp etc. is there. But if you want: FTP keep alive support, CUSeeMe module,ICMP masquerading, VDOLive module, RealAudio module, Quake Module, ipautofw support, etc. you still have to patch the 2.0.29 or lower kernel. regards, =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Andre M. Varon Lasaltech, Incorported Technical Head Fax-Tel: (034)433-3520 e-mail : [EMAIL PROTECTED] web page: http://www.lasaltech.com/andre.html =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Help with IP masquerading
I also was advised to use ip-masq. to solve some routing problems, but when I tried to compile kernel (2.0.27) enabling ip-masq. I found that this option could not be activated from 'make xconfig' menus. Why? How should I activate this option? Thanks, Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: mgetty for PPP; Need help
On Tue, 20 May 1997, Alex Yukhimets wrote: Then try to point Netscape (or telnet) to some digit location. I tried to ping from w95 using digit location. Ping to linux machine's IP gives reasonable results. The same with w95's pseudo IP address. However ping doesn't see any other machines in LAN (ping reported Request timing out). I think due to this reason DNS is not available. On the other side w95 has a corect idea about all addresses ( if winipcfg tell me truth ). Below I placed some info which you mentioned. Then, look in /var/log/massages (the last 20-30 lines,immediately after win95 connection to your server and after netscape fails). It was telnet but I think it doesn't matter. Do you see any clue here? I do not. May 21 02:20:11 crdlx2 kernel: PPP line discipline registered. May 21 02:20:11 crdlx2 kernel: registered device ppp0 May 21 02:20:11 crdlx2 pppd[268]: pppd 2.2.0 started by root, uid 0 May 21 02:20:11 crdlx2 pppd[268]: Using interface ppp0 May 21 02:20:11 crdlx2 pppd[268]: Connect: ppp0 -- /dev/ttyS1 May 21 02:20:14 crdlx2 pppd[268]: local IP address 194.67.208.105 May 21 02:20:14 crdlx2 pppd[268]: remote IP address 194.67.208.10 May 21 02:20:14 crdlx2 pppd[268]: found interface eth0 for proxy arp May 21 02:20:17 crdlx2 pppd[268]: CCP terminated at peer's request May 21 02:20:17 crdlx2 pppd[268]: Compression disabled by peer. May 21 02:35:40 crdlx2 pppd[268]: LCP terminated at peer's request May 21 02:35:43 crdlx2 pppd[268]: Connection terminated. May 21 02:35:43 crdlx2 pppd[268]: Exit. May 21 02:37:10 crdlx2 kernel: PPP: ppp line discipline successfully unregistered You may also take a look in your /etc/ppp/options and /etc/ppp/options.ttyS? files -- options in these files will also apply when pppd is started. Here is the list of settings from /etc/ppp/options. (I don't use the second file - options.ttyS?) - dns-addr 194.67.209.1 dns-addr 193.124.134.1 asyncmap 0 crtscts lock modem mru 542 -pap proxyarp lcp-echo-interval 30 lcp-echo-failure 4 --- Still hope to get any advice from debian user's community. Any help would be greatly appreciated. Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: mgetty for PPP; Need help
On Wed, 21 May 1997, Jens B. Jorgensen wrote: Eugene Sevinian wrote: Ping to linux machine's IP gives reasonable results. The same with w95 pseudo IP address. However ping doesn't see any other machines in LAN. The result is: Request timing out. Ok, here's a question. Did you recompile your kernel or anything? If you did recompile, did you enable IP forwarding? You are RIGHT! It was disabled. The reason is - a lack of knowledge :-( Now I will recompile it and hope it will work. I ask because it looks like the problem is that packets aren't getting past your linux box. Since you can ping the linux side, the link is just fine. If you have the same kernel which came with the dist. then I *think* it has IP forwarding enabled (I'm not sure about this, since I didn't compile that kernel myself). You may be able to discover if it's enabled by looking at some /proc/?? file, but I'm not too sure. Anyone else have a thought? -- Jens B. Jorgensen [EMAIL PROTECTED] Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
It works! (was Re: mgetty for PPP; Need help)
Dear friends, Thanks a lot for your great help! This problem was solved due to your consistent assistance. Sincerly, Eugene On Wed, 21 May 1997, Jens B. Jorgensen wrote: Eugene Sevinian wrote: On Wed, 21 May 1997, Jens B. Jorgensen wrote: Eugene Sevinian wrote: Ping to linux machine's IP gives reasonable results. The same with w95 pseudo IP address. However ping doesn't see any other machines in LAN. The result is: Request timing out. Ok, here's a question. Did you recompile your kernel or anything? If you did recompile, did you enable IP forwarding? You are RIGHT! It was disabled. The reason is - a lack of knowledge :-( Now I will recompile it and hope it will work. Ok, I'm almost positive this will do it. Let me know. -- Jens B. Jorgensen [EMAIL PROTECTED] Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Re:mgetty for PPP; Need help
On Thu, 1 May 1997, Kevin Traas wrote: Run winipcfg on the Win95 box to find out what addresses have been configured on the client side. Report here. Here it is: Windows 95 IP Configuration Host Name . . . . . . . . . : GUK DNS Servers . . . . . . . . : 194.67.209.1 193.124.134.1 Node Type . . . . . . . . . : Hybrid NetBIOS Scope ID. . . . . . : IP Routing Enabled. . . . . : No WINS Proxy Enabled. . . . . : No NetBIOS Resolution Uses DNS : No Ethernet adapter : Description . . . . . . . . : PPP Adapter. Physical Address. . . . . . : 44-45-53-54-00-00 DHCP Enabled. . . . . . . . : Yes IP Address. . . . . . . . . : 194.67.208.10 Subnet Mask . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . : 194.67.208.10 DHCP Server . . . . . . . . : 255.255.255.255 Primary WINS Server . . . . : Secondary WINS Server . . . : Lease Obtained. . . . . . . : Tue Jan 1 80 12:00:00 AM Lease Expires . . . . . . . : Tue Jan 1 80 12:00:00 AM DNS servers are exactly what was set in ppp/options You are having a DNS configuration problem. Either the server isn't configured, or a DNS server isn't being assigned to the client at connect time. (winipcfg will tell you this - if the DNS entry is blank, then that's your problem.) As a cludge fix, you could manually assign a DNS under Win95 by setting it in the TCP/IP properties under Network in the Subject: Re:mgetty for PPP; Need help Date: Monday, May 19, 1997 7:14 AM Presen state is following: Dailing from the w95 box side I see Connected at 14400 bps Duration: 000:06:15 Details: Server type: PPP: Windows95, Windows NT 3.5, Internet Protocols: 1) TCP/IP However, when I try to run netscape ( the same with other staff) netscape stops with following message on status line: Connect: Looking up host: home.netscape.com... And after a bit thinking it returns: Netscape is unable to locate the server: home.netscape.com The server does not have a DNS entry. Ckeck the sever name in the Location(URL) and try again. --- Hope someone can help me to find the way out. Thanks, Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] . Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
May 13 instalation disk's problem (vfat)
It was impossible to install debian on my PC due to the fact I put distibution on w95 partition while vfat fs support was not done successfully. I got 2 string warning that it will tak up 1 minite in case that this device is not installed and stoped forever. Everything was fine in that sense with old Slak instalation from the same w95 partition. Is there any idea? Eugene Sevinian P.S. Just for curiosity ... HOw many people are participating in this mailing list? Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: May 13 instalation disk's problem (vfat)
It was impossible to install debian on my PC due to the fact I put distibution on w95 partition while vfat fs support was not done successfully. I got 2 string warning that it will tak up 1 minite in case that this device is not installed and stoped forever. Everything was fine in that sense with old Slak instalation from the same w95 partition. When you install include vfat. It hangs when I am trying to do it. Exactly at this point! Excuse me that it was not clear from my letter ;-( Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re:mgetty for PPP; Need help
After few attempts to compile the new binary of mgetty with ppp support I was adviced to go back to the initial point and try again with old binary. It became clear ( to Jens B. Jorgensen [EMAIL PROTECTED], not to me :-) that there were a propblem with IP address. When the last item if IP was set to two digit instead of default 3 digit form than things had changed. Presen state is following: Dailing from the w95 box side I see Connected at 14400 bps Duration: 000:06:15 Details: Server type: PPP: Windows95, Windows NT 3.5, Internet Protocols: 1) TCP/IP However, when I try to run netscape ( the same with other staff) netscape stops with following message on status line: Connect: Looking up host: home.netscape.com... And after a bit thinking it returns: Netscape is unable to locate the server: home.netscape.com The server does not have a DNS entry. Ckeck the sever name in the Location(URL) and try again. --- Hope someone can help me to find the way out. Thanks, Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: mgetty for PPP; Need help
On Mon, 19 May 1997, Alex Yukhimets wrote: Presen state is following: Dailing from the w95 box side I see Connected at 14400 bps Duration: 000:06:15 Details: Server type: PPP: Windows95, Windows NT 3.5, Internet Protocols: 1) TCP/IP However, when I try to run netscape ( the same with other staff) netscape stops with following message on status line: Connect: Looking up host: home.netscape.com... And after a bit thinking it returns: Netscape is unable to locate the server: home.netscape.com The server does not have a DNS entry. You might need also to specify the address of nameserver(s) from win95 box side and make sure you give proxyarp option to pppd. I tried to add proxyarp to the coomand strings but things didn't changed. Now it looks this way in /etc/mgetty/login.config: /AutoPPP/ - - /usr/sbin/pppd auth -chap -pap login :194.67.208.10 debug dns-addr 194.67.64.1 proxyarp Ckeck the sever name in the Location(URL) and try again. --- Hope someone can help me to find the way out. Thanks, Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
mgetty for PPP; Need help
I have installed mgetty ( 1.0.0-1 ) and it works fine when I am dial-in from outside w95 machine. Now I tring to add PPP and here are the basic steps which were done: 1. Installing new kernel (2.0.27) with CONFIG_PPP=m 2. Then I edited Makefile in this way CFLAGS=-O2 -Wall -pipe -DAUTO_PPP and slightly modified the policy.h 3. Make; cp mgetty /sbin; rebot After this point I get the message ...S1, too fast respawning mgetty. Suspended for 5 min or something like that. And that is all )-; Hope that someone can help me to overcome this. Thanks in advane, Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: mgetty for PPP; Need help
Thanks Jens, here is some additional info. On Thu, 15 May 1997, Jens B. Jorgensen wrote: Eugene Sevinian wrote: I have installed mgetty ( 1.0.0-1 ) and it works fine when I am dial-in from outside w95 machine. Now I tring to add PPP and here are the basic steps which were done: 1. Installing new kernel (2.0.27) with CONFIG_PPP=m You didn't use 'make config' or 'make xconfig'? When you recompiled the kernel did you make modules and modules-install? You know, the PPP module depends on others (can't think of them offhand). I did it. 2. Then I edited Makefile in this way CFLAGS=-O2 -Wall -pipe -DAUTO_PPP and slightly modified the policy.h Did you need to compile from source? The stock binary includes AUTO_PPP support. First I had problems with this binary. Trying to connect from w95 I got ... The computer you're dialing in to cannot establish a Dial_Up Networking connection. Check your password, and try again. ... so I decided to compile from source. 3. Make; cp mgetty /sbin; rebot After this point I get the message ...S1, too fast respawning mgetty. Suspended for 5 min or something like that. And that is all )-; If mgetty is respawning, something larger than ppp is probably wrong-- it would never have a chance to take a login? Perhaps something you did to the config is causing this. Did you change the config file? Did you look in /var/log/mgetty/* for error messages? Here is the messages coresponding to the new compiled binary lifetime from /var/log/mgetty/mg_ttyS1.log. -- 05/15 14:16:54 yS1 mgetty: official release 1.0.0 05/15 14:16:54 yS1 check for lockfiles 05/15 14:16:54 yS1 locking the line 05/15 14:16:54 yS1 lowering DTR to reset Modem 05/15 14:16:55 yS1 send: \dATQ0V1H0[0d] 05/15 14:16:56 yS1 waiting for ``OK'' ** found ** 05/15 14:16:56 yS1 send: AT[0d] 05/15 14:16:56 yS1 waiting for ``OK'' ** found ** 05/15 14:16:56 yS1 waiting... 05/15 14:45:01 # failed dev=ttyS1, pid=10653, got signal 15, exiting -- Hope that someone can help me to overcome this. I'll try. I use mgetty/ppp all the time. Never compiled mgetty myself. -- Jens B. Jorgensen [EMAIL PROTECTED] Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: mgetty for PPP; Need help
Mgetty string in inittab look like s1:23:respawn:/sbin/mgetty -D ttyS1 Is it enough or I should set this -D somewhere else ? I've seen this with mgetty trying to initialize a modem that was not a fax. Add '-D' to the mgetty line in inittab, or (I think) 'data-only' in the mgetty.config file Tim Eugene Sevinian Cosmic Ray Division Yerevan Phisics Institute Alikhanian's Brothers str.2 375036 Yerevan 36 Armenia URL: http://www.yerphi.am/crd/prs/sevinian.html Phone: 374-2-352041 (YerPhI), 374-2-344873 (aprt.) Fax: 374-2-350030 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
