Dale If you do not get a response from someone else, email me direct. I
will be home this weekend and yes I have the schematics on a disc, but I do
not remember if they show voltages.
Carl WD8NHK
In a message dated 2/14/2017 10:04:02 P.M. Eastern Standard Time,
pari...@frontier.com
Hello all,
Any of you have a TR7 500khz filter that you feel is excess and would
like to sell?
Contact
Carl WD8NHK _gypsymt34@aol.com_ (mailto:gypsym...@aol.com) ___
Drakelist mailing list
Drakelist@zerobeat.net
Hi Folks, A fellow Drakester came through...thanks for reading. Carl
wd8nhk
In a message dated 11/22/2014 11:43:00 A.M. Eastern Standard Time,
gypsym...@aol.com writes:
Hello all,
Any of you have a TR7 500khz filter that you feel is excess and would
like to sell?
Carl WD8NHK
Hope everyone has a very Merry ChristmasI'm politically incorrect
enough to post that.
73, Thom k3hrn
The same to you Thom.
If my memory serves; You certainly are having fun in the snow with
Christmas in N. H.
Carl WD8NHK
PS.
I'm definitely not one for political restraints of
Woops I didn't send to the list.Carl
In a message dated 10/11/2013 7:47:51 P.M. Eastern Daylight Time,
gypsym...@aol.com writes:
In a message dated 10/11/2013 7:31:55 P.M. Eastern Daylight Time,
w1es1...@triad.rr.com writes:
If swapping the tube brings no resolution, check all
pa...@hal-pc.org writes:
Any one know where I can buy a couple of aluminum disk inserts for the
TR-7 mode switch and band switch knobs? 73, Paul, W5NTQ
Hi Paul,
Google KE9PQ; He has the inserts, and for that matter knobs, I just
looked. Carl wd8nhk
Hi all,
Selling my Drake TR-M.. M = Marine
It is brand new, never put it in the boat.
Obviously never used, still in its original Drake unopened box.
This is an HF rig. SSB or AM 150W PEP
It has the optional 12 V power supply.
It has a built in antenna tuner, can tune a 23 ft vert.
_eugeneb@nni.com_ (mailto:euge...@nni.com) writes:
Need a top for the PA finals cage and a new Plate
control shaft for a TR-4C.Gene K1NR
Gene,
Some of the TR4/4c's didn't have a top for the finals. In addition some
of the final tube heights won't allow the cover which I think is why
In a message dated 7/18/2012 8:19:13 A.M. Eastern Daylight Time,
ars.f...@wanadoo.fr writes:
TR5, need the schematic drawings
TR5 schematic was in a pocket in the back of the owners manual.
Physically it is about 2' x 3'.
If you want to defray cost I can get to a Kinko have them copy and
I'm having terrible luck replacing mine. Anybody have one of=r know of an
existing substitute? 200ma
Steve KA9MOT
The actual meter from an MN2000. Mine is already gone.. Carl WD8NHK
___
Drakelist mailing list
Drakelist@zerobeat.net
euge...@nni.com writes:
R4B. I
noticed that even the transformer seemed very warm - virtually hot.
Probably the tube just to the right of it, a small fan on top of the case
helps a lot.
Carl WD8NHK that's what I do with my R4___
Drakelist
Hi all,
Just checking, have not seen any messages since Apr.7., checked the
archives to verify that It didn't seem to be me related. Carl wd8nhk___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
In a message dated 3/12/2012 2:24:50 P.M. Eastern Daylight Time,
k...@yahoo.com writes:
Is anyone presently make replacement front panels?
_http://www.wb4hfn.com/DRAKE/DrakeArticles/FrontPanels/KF4MW-Panels.htm_
(http://www.wb4hfn.com/DRAKE/DrakeArticles/FrontPanels/KF4MW-Panels.htm)
Hi to the group,
Am working on a Icom transceiver. Long story short. Power supply
switching type, all stuff pc mount (quite the build, as in bomb proof,
literally
screwed lids etc unit ), in any case a rattle...Got it apart.. AND FELT
LUCKY
..Has anyone ever seen an aluminum cap
w1es1...@earthlink.net writes:
Yes - the hot lead should always be the lead that is fused.
I don't always use the word always (or, for the record, never), but in
this case I shall make an exception...Steve Wedge, W1ES/4
Hi Group,
Steves comments got me to thinking and that is unusual at
w4...@aol.com writes:
In order for this to work, that ribbed side of the line cord must be
inserted in the wall socket so that the ribbed side pin of the plug goes into
the larger slot in the socket. If it is inserted the other way around, you
are no better off than you were before.
You are selling your mom, and what does she say about it ?
Or is it that you just promote advertising. Carl wd8nhk
In a message dated 1/14/2012 2:55:52 P.M. Eastern Standard Time,
n...@juno.com writes:
hi gang
have the following for sale if anyone interested.
serious inquires only
Hi all,
Do we have any collectors of old morse straight keys in the group?
I suddenly find myself with a an original well used/abused WW2, J41A (
which is an unusual piece) to dispose of. This was from a 90+ yr old lady,
and I don't think she wanted to give it away, more like she's
In a message dated 12/21/2011 11:48:39 P.M. Eastern Standard Time,
w...@roadrunner.com writes:
First remove the crystals. They occasionally fail and are needed.
Wailll, I think the PTO should come out of there too, and then of course
someone will say the relay, and oh yeah the light bulb
Hi All,
Well I see that upay has it at $20, someone wanted for parts. If it was
at a ham flea market I'd probably be idiotic enough to buy it for that too,
but darned if I would pay 2x , shipping on top. Carl wd8nhk___
Drakelist mailing list
lee.hi...@gmail.com writes:
Or Worked last time I used it! 73 de Lee Hiers, AA4GA
Now wait a sec there Lee, I resemble that remark. Have an R4 that I have
not touched for perhaps four years.
Of course if I were going to sell which I am not morals would come
into play and I'd have
HI all,
My annual Christmas looking for.
JUST the meter from an MN4c, MN75, MN7, MN2700 is what I am really
looking for.
A basket case of any of them, burned up, mutilated, dropped and bent up.???
I am not interested in a working unit.
Anyone out there have a unit, that fits the description,
Hello Steve,
w1es1...@earthlink.net writes:
Does anyone have more information on which components are mounted on this
board?
FWIW modsDK _http://www.mods.dk/view.php?ArticleId=3237_
(http://www.mods.dk/view.php?ArticleId=3237) has three pieces of information
on an SPR4
The owners
Hello all,
Using an L7 which has seen very light use, does sit in a non heated or
ac'd atmosphere.
I do not have the manual home with me, nor the schematic.
The problem. When used in the bypass mode ( not on ) I can get reception,
but tend to have the volume up on the tcvr.. When I key
Hello to the group.
MN2000...Whats left; The cabinet, the inner box and chassis, brkts etc,
the big variable caps (and both big knobs). The front face plate (nice) .
The inductor coils. The circuit board for driving the meter, the wafer
switch, the small switch ( knob ) reset swr. The
_kj6cfi@yahoo.com_ (mailto:kj6...@yahoo.com) writes:
I am looking for an MN-7 tuner in good condition. Denny Dollahon, KJ6CFI
While you are looking around if you find a meter for one let me know.
Carl wd8nhk___
Drakelist mailing list
Hi all,
Nosing around for a non functional Drake CS-7 remote antenna switch
...remote box, complete.
Yes I know it probably got hit by lightning.
Anyone out there have one they want to part with? If so please email back
direct.
Carl wd8nhk (Dayton,
top...@att.net writes:
Lookin for any info on Drake Equipment,Im a newbe to the world of Ham
Suggest you refer to _www.wb4hfn.com_ (http://www.wb4hfn.com) and be
ready for a lot of info.
Carl wd8nhk___
Drakelist mailing list
Weller 100/140 gun
Insufficient heat. I have found that about once a year I have to back off
on the nuts that hold the soldering tip in place and re snug them down.
Probably gets oxidized ? In any case and this may be in particular to my
guns ( I have two of those ) If I can't hear
kih...@yahoo.com writes:
I could convert my T-4X back to T-4 if a front panel can be obtained, and
increase the resale value. hi.
Well this is your lucky day...
How about a brand new T4 front panel (unpunched) , chassis (bare), inner
chassis lid, and outer cabinet.
And what might
Hi all,
Here is a chance for all of the gurus to shineAnyone got a good set of
truth tables, for a Digital Control Board and a Translator Board
Original headache, never mind that there (still) is no sound . DR7 board 2
Megs down.
Ok I'm going a little cockeyed.
Digital control Board to
rasta...@verizon.net writes:
Does anybody have any spares or know of a source? Tony
Sorry Tony, I do not. However on one I used clear heat shrink after a
very thin glue up.
Its still holding, I did both to make them look the same and prevent
further incedent
...ERGO save the pieces
Carl
_donc@martineer.net_ (mailto:d...@martineer.net) writes:
Speaking of Donnie, does ANYONE know what happened to him in relation to
Drakes and Drake parts??
I purchased a basket case TR4 and a TR4c from him in a couple of years
ago. Went to his home to get them and he said (loose quote) he
Wondered if anyone was going to start this.
My Drake R4 is serial number 861. John, K5PGW
I've got number 270 Carl wd8nhk
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Just happened to think that comment reply might be appropriate to the
whole list.
Often, these meters connected one side of the line to the chassis of the
meter, so that when you connect the negative of the meter to the radio,
sometimes you'll get quite a surprise.
Yep, just be careful
Hi to the group,
Don't ask why, I'm already kicking myself.
Anyone out there have any of the + 24 V regulators that are used in the
TR7 power supply board.
Part is a TO-92 case Actual part number shown is MC78L24AC
That is a valid number and yes Mouser (says) they have them.
Have not
Hi all, wonder what/who is contaminated allowed all of the spam in, must
have been twenty of em.
Son tells me its probably somebody who sent in a question or reply from
their 4th gen device.
Carl wd8nhk___
Drakelist mailing list
Hello to the group.
TR7
A: I have reseated all the boards.
Stored unit for nine months. Hooked up yesterday.
Digital freqs way off, 12xxx while in 20 M position 5xxx while in 40 M
position...etc
Did have some signals (SSB) input on the 20 M position, but mechanical
dial says way off
gypsym...@aol.com writes:
Well here I go again.
TR7 suddenly decides to not hold the digital frequency readout.
Yes reseating the boards did resolve. Went through all of them. Wish I
had the Aux 7 modules done so I could have plugged that board in now
considering.
Sigh...your laugh for
Hello all,
Does anyone out there have JUST the meter from an MN4c, MN7, MN75, or
WH70 to 300 watts.
Functional or not. Carl wd8nhk___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Hello all,
Have a Drake MN2000 chassis with variable capacitors.
Chassis,inner and outer cabinet shells.
This is the only item I have ever been stung at through Upay when offered
by a fellow ham.
What happened ?
Meter and its circuitry intact. All the knobs intact except no antenna
To all, I have both the B line and the TR4c CD's and they are very easy
to work with and have material you don't have available anywhere else.
So if Garey say's he has the CD for R4A T4x if I had them I'd get it.
Carl WD8NHK___
Drakelist mailing
_richfb...@sbcglobal.net_ (mailto:richfb...@sbcglobal.net) writes:
Thoughts, suggestions? Thanks for all advice offered. 73 W5BXE
Rich, I went through that on an MN4c yes it was the diodes both were
bleeding backwards when out of circuit and tested.
The ones they use in all of the units
ph...@aol.com writes:
Looking for a Drake AC-4 power supply in good shape, must be complete
functional even if not re-habbed/re-capped/upgraded. Just need the supply,
Paul, K4MSG
I have one, intact, original, and functional, will even sell the Heathkit
recap package which is not
Hi folks,
FWIW Took a cabinet up to Hartzell in Miamisburg, OH today, as they did
the original Drake cabinets. I live about three miles from them. Was going
to have refinished. I had sticky paint, which is/was literally impossible
to sand off.
In any case somewhere in the list stuff it
Hi to the group,
I am looking for a meter...defunct fine. Drake MN (antenna tuner) 4c,
7, 75 or even a WH7
These are all rectangular surface mount, although mounted in back of the
panel. Anyone got one in their junk box? I really want JUST the meter,
unless you happen to have a
Hello to the group,
First Call, for a Drake memorabilia item.
Drake sales literature. Original, uncreased, not yellowedquite nice.
Price includes postage in the continental 48 states. Other would be
additional.
For the person who collects the 2 series. Two pieces of literature as a
Hi to the group,
Is John the TR7 dude (the parts man) still available ? My old listing
does not get him, he used to be all over Upay, but I have not seen an ad of
late.
Thanks if you know an answer. Carl WD8NHK
___
Drakelist mailing list
To the group,
I have already responded to Halo net in Re the twelve pin for the 4
series. Now for Bob AD3K, I do have a spare Bat connector 4 pin keyed female
with a side entrance for the cables for the 5 or 7 series.
I'm sure something could be arranged, The problem as always is the
To the group,
Second best I've found is from WB3CEZ on EBay. It's a CD with great
scans and full size schematics. $10 +$2.00.
I also have this disc and cannot argue that it is reasonable and easily
read. However it does not have the schematic of the main board which in the
Drake
Hello to the group,
Can anyone with some certainty advise what the coax cable part number is
between boards on a TR7.
It appears to be RG174 with a 26 gauge solid core.
All replacements found have been 24 gauge...won't work has to plug into
those little holes. In addition the source winds
n4...@coastalnet.com writes:
I apologize for this automatic reply to your email.
N4BNO
Hmmm auto shut down and you want a lists help.but the return address
was NOBODY etc...good luck.
___
Drakelist mailing list
Drakelist@zerobeat.net
Hello to the group,
Question one.
It appears that if one pulls the plastic end caps from the front panel, has
the top cover and bottom panel removed, have the DR7 board out, then
pulls two of the three screws on each side that the front panel will pull open
like a horizontal hinge..do
Hello to the group.
Have a TR7 ...mid range serial number.
Without tearing a bunch of stuff apart.
also have a TR5 and a TR4c, the question ...is the pto action on the 7
stiffer than the other two. The 5 is like silk and the 4c feels just a
tad stiffer than the 5.
Per the archives
Hi to the group,
Had a deal that went South.
For Sale
As a package TR4c 37379, MS4 speaker, AC3 power supply with the ACR4 cap
update installed, and a W4 wattmeter. Everything functions. $ 350
Carl WD8NHKDayton, OH
___
Drakelist mailing
_rfch...@verizon.net_ (mailto:rfch...@verizon.net) writes:
Can someone familiar with the TR-5 please clarify these numbers and the
rumor? Ed K2ZE
Ed,
NOW you have my curiosity up too.
I own # 1386 that I purchased new.
Steve Whitefield was one of the two lead engineer types on
Hi to the group,
In Ohio as a package.
Have for sale a TR4C # 37379 ; MS4 spkr w/ AC-3 PS which has the ACR4
board, and a W4 wattmeter.
Looking for $350 plus shipping from 45449, would have to be 4 packages.
Fed X probable. USPO money order.
If you pick up I would include
jee...@netins.net writes:
Hello to all,i am looking to buy a DRAKE R4,in good condition,Thanks.
Clarence
Your ham call ? Have a functioning R4 # 270, your expectation of cost ?
Carl WD8NHK
Anyone else looking?
___
Drakelist mailing list
Just wondering if I should continue the list, or simply remove it from
the server? Thom
Read your original down for a glitch last week.
In RE above...do you want to see a grown man cry.
Carl Hibbard
**
Download the AOL Classifieds Toolbar for local deals at your
wa7...@charter.net writes:
selling them under the Philmore brand in blister packs and it was Philmore
# 3050. They
are listed as 1 diameter .
Highlight the Philmore # 3050 and search it, you have them for $ .79 each.
Carl wd8nhk
**Access 350+ FREE radio stations anytime
Hello to the group,
Anyone out there have a basket case MN2000 laying around. Don't need
cabinet or caps.
Carl WD8NHK
**Great deals on Dell’s most popular laptops – Starting at
$479
Am planning to sell my B line. Before I use ARRL or Ebay I thought of the
list. Do not need to sell but am not using it.
R4B # 15033 (G xtal) with a flull rack of accy xtals.
T4XB #18911 (Bxtal) including cabling.
AC-3 power supply with Mikes/Heathkit board mod.
MS4 speaker
All in nice
Hi all,
TR7 ...new to me.about 2 hrs. (was functional per a picture)
Yeah Yeah that's why I'm selling the B line...no comments please.
Also got stung on an MN2000 which you can you tell from my emails.
Digital readout non functional except for the dot...as in 7268 (dot) 00
DR7 board and Aux
In a message dated 4/15/2009 7:12:31 P.M. Eastern Daylight Time,
wd8...@yahoo.com writes:
Make sure the store button on front panel is released.
73, Bill
Bill Got it and thank you all.
I exercised it a couple of times and there are the digits.
Carl WD8NHK
**Great deals on
n3...@verizon.net writes:
But if it is not what should we as hams do ???
Well if it were me and this was real I'd make sure the ARRL was aware of it.
Have them do a pass on the ARRL computers to find attorney's that were hams
in the effected area.
Then someone is going to have to
k4...@mindspring.com writes:
abby...@juno.com wrote:
. any help would be appreciatedThanks Kay N5LUI
Kay, as Garey said 1N295 diodes are somewhat hard to find.. Your situation
was mine about a month or so ago. Found two sources online. Used
_www.surplussales.com_
Hi to the group,
For those of you who have a PS7 looking at the metal grate cover on the
top...would you call it black or like mine a dull OD (olive drab) brown-ish.
Carl WD8NHK
PS for those of you who remember my MN2000 ? as to whether it had an inner
coverthe answer was yes...and now
Hello to the group,
First? Does anyone have an MN2000 parts rig ?
Oh yes; I still have a spare cabinet for one, will need refinishing, but a
great big black cabinet.
Second? Did the unit come with an aluminum top side cover when out of the
cabinet. The holes are all drilled and tapped,
Ok all, to those of you who have responded already a thank you.
I have to make a cover or ..
Wait and see if anyone responds that has a parts unit.
Carl WD8NHK
**A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
loren...@verizon.net writes:
Anyone have a source for the S-310-CCT and S-312-CCT power connectors?
Loren - WA3WZR
Loren, what do they fit as in application, I am presuming these are Cinch
connectors. Have you come up with perhaps a pic of what the pin / socket
setups are.
Carl-
Hi to the group,
On an MN4c antenna tuner.
Well I have now had my first ever diode (a 1N295) that was a partial open ??
and another shorted ?
under load BTW all of the components checked good even with the board out
of circuit and the 68 ohm lifted
MN4C that maxed out on the pot would only
Is there anything sacred about a 1N295? K4RV
Typical GE I suppose except perhaps for the 500 mA surge.
But I know they work correctly and that's sometimes what counts.
Carl wd8nhk
**The year's hottest artists on the red carpet at the Grammy
Awards. AOL Music takes you there.
Hello to the group,
Am working with my TR 5.
Initially used a R.S. fan but was way to noisy.
Read the archives. Evan K9SQG said he used 220 V. ...soo
A Boxer 230 V. with ball bearings Pewee starts and runs fine.
Still to noisy. Made neoprene washers for the metal to metal mount...no
help.
I
Hi to the group,
Anyone out there got a spare 1N295 diode ,that they want to part with?
Else if you have purchased lately from what source if you would share that
information.
Carl Hibbard WD8NHK
**A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
_cptc...@flash.net_ (mailto:cptc...@flash.net) writes:
Curt said
If you dont get any other info, I know how to make one. Basically a blank
glass and a reverse image waterslide decal from inkjet/decal paper. Just need
a
scan of a 2b dial glass.Curt KU8L
Anybody ever tried this
rcle...@erols.com writes:
Bob WW3QB
Bob,
You are looking for a ham who was on the Drakelist from Halo.net with the
pcb mod to a TR3. It will be in the archives perhaps July or Aug of 2007.He
had the description and the write up of his projects.
The bulb deal was also on the
To the group, I erased Johns email address or would have sent this direct.
Hi John,
Hope your potentiometer arrived safely.
I do not have a relay in my parts TR4,
Hope the information on the Drake/ John Kriner circuit board and plug in
relay made sense and is of use.
There was a ham who
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
I Need a 200 ohm pot for the S meter zeroing circuit . It is R 70 in both
the TR 3 and the TR 4. It is TAB mounted ...John k5pgw
Yes John I have you covered, contact me.
Now looking for the East Coast person that wanted an MN 2000
Hello to the group,
Off the subject a bit perhaps, but.
I have only Really been into Drake equipment for about a year and a
half. Read the archives etc.
Purchased some items from Don Garrett WA9TGT when he was still making his
Drake replacement pieces and he gave me a piece of advise
Hello to the group,
Has anyone out there installed a Hy-Gain MK80 adapter (80 meter top loading
coil setup) on top of their Hy-Gain 14AVQ (10-490 meter) VerticalNote
this is a non WARC setup.
If you have how much did you have to trim the 40 metier capacitor hat?
Roughly.
Did you
Hi to the group,
Anyone out there have the instruction set up sheets for what is apparently a
Hornet TB 500 tri band antenna hidden away in a filing cabinet or other
available source.
Appreciate any help.
Carl Hibbard WD8NHK
**New MapQuest Local shows what's happening at your
[EMAIL PROTECTED] writes:
You might want to keep your eyes open for one of the Heath VTVMs
Hi Garey,
And somewhere on the internet was rebuilding instructions (or have it done)
for the probes I believe I found the article somehow through the drakelist.
Carl WD8NHK
**Get
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
To aadelma who ever you are
snips
Can anybody recommend a decent DMM ... Something with a fair sized display
for my aging eyes would be great. I don't need laboratory accuracy, just a
reliable instrument.
On a personal basis I
Well let me get my $.02 in here...
Folks in regards to this particular seller on ebayI really do think he's
being honest. This R4B and all of the rest of his stuff... are
undoubtedly unused,.BY HIM
Carl WD8NHK
**Get the scoop on last night's hottest shows and
Hello all,
Anyone around Ohio have the equipment to properly align W4's and an MN4C ?
Would really prefer to have the MN4C corrected first.
Using my TR5 and not changing anything, working into a dummy load (oil can).
One W4 (which I think I trust) shows 90 W ...was not driving full tilt,
[EMAIL PROTECTED] writes:
I cut erected a zip cord dipole based on 80-meter dimensions, I plan to
use it to-morrow with my rejuvenated Drake T-4X --- alongside the R-4 ---
outdoors, under the gazebo, WX permitting...
Are there any regular informal hang-out frequencies / times used
[EMAIL PROTECTED] writes:
Hi Eddie,
I cut erected a zip cord dipole based on 80-meter dimensions, I plan to
use it to-morrow with my rejuvenated Drake T-4X --- alongside the R-4 ---
outdoors, under the gazebo, WX permitting..
Good luck and I hope you are comfortable on the gazebo.
.Are
[EMAIL PROTECTED] writes:
Garey Barrell [EMAIL PROTECTED]
Thanks for the information and thought train Garey, have both a 10M ohm and
a 20M ohm VOM
that's a decent start.
73'sCarl WD8NHK
**Get the scoop on last night's hottest shows and the live music
scene in your area
[EMAIL PROTECTED] writes:
Garey Barrell [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Carl -
If you have a VTVM or DMM with a 10-11M input impedance, all you need is
an RF probe.
Sorry folks, tired, sent to the list not the printer.
Carl
**Get the scoop on last night's hottest shows and the live music
scene in your area - Check out TourTracker.com!
(http://www.tourtracker.com?NCID=aolmus0005000112)
Hi all,
For those with experience in regards to dipole and inverted v antennas.
I do not have enough length available for an 80 M dipoleI do however
have enough room to run to wires from our chimney into my back yard with about
92 ft one way and 95 ft plus at another angle. This would
Hi all,
Am sneaking in here, xyl is on a somewhat warpath with time spent over
latest black box from hamvention Hang in there with me Garey K4OAH I may
get
to work on that T4XB at 2 AM.;She hasn't spotted that there are two other
pieces..I think I'm in for a rough summer.
[EMAIL PROTECTED] writes:
I was cautioned by one person there to have the power supply checked first
(good idea). I'm wondering if there is anyone who rebuilds these with modern
circuit boards to eliminate bad cap problems?
Have three of the power supply's with the Heathkit shop's
[EMAIL PROTECTED] writes:
Terry. Electronicplus.com in California will have it . Their shipping
charges are high. Mouser.com may also have it. John. GI3KDR
Terry's listing says no longer available. A google search supplied that
address.
I do not think Mouser had it either.BTW
[EMAIL PROTECTED] writes:
I also need a set of plastic end strips! John. GI3KDR
John, Archives within the last two weeks had the source information on 7
line end plastic pieces.
Carl Hibbard WD8NHK
**Wondering what's for Dinner Tonight? Get new twists on family
favorites
[EMAIL PROTECTED] writes:
Byron WA5THJ.
My TR4 with the original (fixed) relay would not pull in originally. After
cleaning the relay points it wouldn't release as you describe. After
putting the VOX VOX delay pots mid range and on the third cleaning it did
work ...sometimes. If
[EMAIL PROTECTED] writes:
What bugs me is the people who trace a problem down to a certian board, then
replace the board. Ever hear of FIXING the darn board?
Wish they would send me all their bad boards, I could fix them and make some
money on e-Pay.
-Jim
Well Jim, I'm not a TR7 or RV7
[EMAIL PROTECTED] writes:
Appreciate any recommendations. thanks Wade
I'd use contact adhesive. Hair dryer would get it back off in the future if
I had to.
**It's Tax Time! Get tips, forms and advice on AOL Money
Finance.
[EMAIL PROTECTED] writes:
Can anyone help me find a TR-4CW 500k VOX GAIN POT?
Thanks in advance,
Randy
W7CPA
Randy , TR4C ( vox ) pot is the dual ganged R98/R74 xmit gain...both 500K
ohm both labeled xmit gain.
The xmit gain on a TR4 is also a dual pot and is also an R98/R74
That
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes:
What’s the website address for this INRAD place? Terry K7WLD
5 seconds on a subject search Terry ? ? ! !
Inrad filters
_www.qth.com/inrad_ (http://www.qth.com/inrad)
**Create a Home Theater Like the Pros. Watch
1 - 100 of 161 matches
Mail list logo
