All,
I have DX4WIN 9.0.9 running on a Windows 10 PC which has one build in
hardware serial port which is connected to my Kenwood TS-950SD via the
Kenwood IF-232. I then have a USB 2.0 to Serial (FTDI chipset) adapter
plugged in to a USB 2.0 port (COM9) and configured DX4WIN to use COM9 for CW
need some help! I recently got DX4WIN 8.05 and microHam router 8.40 to
use with new computer and win 7 of course this turns into a problem.
with writelog and winkey it works great. But trying to key the 2000D
this morning from DX4WIN it no longer works. it used to with XP and the
older
See the example configuration for DX4Win and MK II in Router (Help
| Download Documents) or on-line www.microHAM-USA.com/support.html
in the microKEYER II area.
In all probability you are setting DTR = High in the radio set-up
and telling Router to use the same port for CW and Radio. Follow
DX4WIN can key to COM or LPT port only. If you are trying to do this
through USB, then you will need a USB-to-COM or USB-to-LPT adapter
cable (hardware). Those built using the FTDI chipset seem to work
best.
--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I find the following a bit difficult to believe - but it seems to be the case!
After many years as a DX4win user - starting with v4 but currently on v7, I
decided to try CW keying from the program using LPT and the same connecting
interface as used for Wintest and other programs - i.e. pin 16
I have the same problem here. I am using v8.03, Windows XP, SP3 , USB
interface RigExpert Tiny, virtuale: COM1 - CAT; COM2, PTT delay 0, DTR =
CW keying, RTS = PTT. When I start a CW keyboard message the FT1000MP locks
on key down. Changes and values DTR and RTS do not give positive result.
Anyone know - please post HERE - what the latest is on this?
Could the vendor advise the customer please?
Thanks
Steve
GW4BLE
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help:
-
boun...@mailman.qth.net] Namens Steve GW4BLE
Verzonden: woensdag 20 januari 2010 12:42
Aan: Dx4win@mailman.qth.net
Onderwerp: [Dx4win] CW Keying - 8.03
Anyone know - please post HERE - what the latest is on this?
Could the vendor advise the customer please?
Thanks
Steve
GW4BLE
Hello
I have also the same problem : locks on key down (cw via virtual serial
ports)
Equipement here :
Windows XP SP3
micro keyer II
Icom 7700
All work on 8.02 but not on 8.03
The solution for me, is use now winkey via micro keyer II and all work
!
Best 73
HNY
Yann F5NBU
www.f5nbu.org
Hello
.
73 Kostas sv1dpi
- Original Message -
From: ON4AOI on4...@skynet.be
To: dx4win@mailman.qth.net
Sent: Monday, January 04, 2010 6:02 PM
Subject: [Dx4win] CW keying issue
HNY All,
Like I asked before I like the following info
From those that have the keying problem
Example
OS: VISTA
...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Kostas Stamatis
Sent: 05 January 2010 12:57
To: REFLECTOR dx4win
Subject: Re: [Dx4win] CW keying issue
Maybe someone with the problem can try this to tell me if it
works (it worked in one of my friends).
Do a right click
Ian Trusson
Verzonden: maandag 4 januari 2010 3:17
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] CW keying issue?
I have been following the CW Keying Issue thread in the archive, but
the
thread seemed to come to an end on 28 Dec 2009 without a resolution.
I have the same problem here. I
-Message d'origine-
De : dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
De la part de ON4AOI
Envoyé : lundi 4 janvier 2010 08:50
À : 'Ian Trusson'
Cc : dx4win@mailman.qth.net
Objet : Re: [Dx4win] CW keying issue?
Hi Ian,
The discussion did not end behind screen
Trusson
Verzonden: maandag 4 januari 2010 3:17
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] CW keying issue?
I have been following the CW Keying Issue thread in the archive, but
the
thread seemed to come to an end on 28 Dec 2009 without a resolution.
I have the same problem here. I am using
HNY All,
Like I asked before I like the following info
From those that have the keying problem
Example
OS: VISTA HOME
Brand of LAPTOP = HP DV9700
Real Serial on MB = NO
Real serial via add on board = NO
USB to serial = YES brand GEMBIRD
To be sure check in control panel|system|devicemanager
if
I have been following the CW Keying Issue thread in the archive, but the
thread seemed to come to an end on 28 Dec 2009 without a resolution.
I have the same problem here. I am using v8.03, Windows 7, USB to serial
converter, COM1, PTT delay 1, DTR = CW keying, RTS = PTT. When I start a CW
: maandag 4 januari 2010 3:17
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] CW keying issue?
I have been following the CW Keying Issue thread in the archive, but
the
thread seemed to come to an end on 28 Dec 2009 without a resolution.
I have the same problem here. I am using v8.03, Windows
So has anyone else got any thoughts about the issue with CW keying
locking up in version 8.03? As I posted to this list, I've tried
literally every combination of using CW Keying PTT on both DTR and RTS
with no luck. I've tried a completely clean install on the same computer
with the same
Just as a follow-up, I switched the keying from COM3, which is on an
added-on card to COM1, which is the serial port located on the
motherboard (on the off chance there was something odd about the serial
port drivers) and unfortunately it made no difference.
On 12/28/2009 4:04 PM, David, K2DBK
: dinsdag 22 december 2009 2:52
Aan: Peter Archibald
CC: dx4win@mailman.qth.net
Onderwerp: Re: [Dx4win] cw keying 8.03
Tried it here and it works fine. In fact I notice a major improvement.
You can now use the same COM port for radio control and CW. I use RTS
to
supply power to the interface
Thanks for all the reply's. Going back to 8.02.
Happy Holidays Peter/W4zgr
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
This
On Tue, Dec 22, 2009 at 7:56 AM, Peter Archibald w4...@arrl.net wrote:
Thanks for all the reply's. Going back to 8.02.
Surely, the people who are using COM port keying successfully can help
us get to the bottom of this problem. It *should* work, and it's more
important to debug the problem
Aan: Peter Archibald
CC: dx4win@mailman.qth.net
Onderwerp: Re: [Dx4win] CW Keying 8.03
On Tue, Dec 22, 2009 at 7:56 AM, Peter Archibald w4...@arrl.net
wrote:
Thanks for all the reply's. Going back to 8.02.
Surely, the people who are using COM port keying successfully can help
us get
Version 8.02 works fine. Version 8.03 setup same, but when activated, keys
transmitter and locks on. Only way to unkey radio is exit the program.
Thanks, Peter/W4ZGR
w4...@arrl.net
__
Dx4win mailing list
Home:
On Mon, Dec 21, 2009 at 5:00 PM, Peter Archibald w4...@arrl.net wrote:
Version 8.02 works fine. Version 8.03 setup same, but when activated, keys
transmitter and locks on. Only way to unkey radio is exit the program.
Thanks, Peter/W4ZGR
w4...@arrl.net
What kind of keying are you using?
Jim:
Using DX4WIN on com port. Same setup in 8.02, no problems.
Peter/W4ZGR
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
This
Tried it here and it works fine. In fact I notice a major improvement.
You can now use the same COM port for radio control and CW. I use RTS to
supply power to the interface and DTR to key the CW line. I believe this
is new in Ver 8.03. This is going to be real handy with my laptop which
only
: [Dx4win] cw keying 8.03
Tried it here and it works fine. In fact I notice a major improvement.
You can now use the same COM port for radio control and CW. I use RTS
to
supply power to the interface and DTR to key the CW line. I believe
this
is new in Ver 8.03. This is going to be real handy
Been too busy with work to try and work a little cw until now but noticed
the problem right away when trying to key the radio and seeing the letters
run together. I am using a simple interface using the computer parallel port
to key for cw. Worked great until this version. Hope there is a fix.
Paul has tracked this down. It was a new bug created when he fixed
something else... it happens ;-) I'm pretty sure it will be OK in 8.02.
Jay Hainline wrote:
Been too busy with work to try and work a little cw until now but noticed
the problem right away when trying to key the radio and
: [Dx4win] CW Keying
References: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]
Hi Terry and the Reflector.
Trying to get ready for field day and I need some quick help.
I have Version 5.03 running on XP with one of the few reasonably new
laptops that still has a Serial Comm port. I've used DX4WIN
I recently converted from version 6.03 to 7.01. I noticed what seems to be
a change (perhaps a bug) with CW keying. It seems that under this version,
when I use the built-in keyer, PTT is behind triggered as well, which was
not the case previously. System is Windows XP Pro, I have COM2 set up
I just reinstalled DX4WIN version 4.07 on a new computer.
I can't get the CW to send. When I type in X ENTER, the rig goes into
transmit. WHen I type on the keyboard the letters are echoed in the program,
but the rig just stays in transmit and dosen't actually send the cw characters.
The LPT
Thanks to all for responding to my plea for an install of versiion 4.07. I'm
up and running again!
Next question. I can't get the CW keyer to work in DX4WIN. It puts the radio
in transmit with CTL D, but it does not send out CW neither from the keyboard
or the function key messages. I know
I have a new Windows XP system. I installed a SIIG Cyber PCI I/O card
to give me an extra LPT and two extra COM ports.
The additional LPT port is LPT3. When I configure DX4WIN (Version
6.02) to send CW over LPT3, DX4WIN says Cannot find LPT3 for
keying.
I see that LPT3 is installed by
I have been using DX4win since 3.0 with various computers and operating
systems w/o problem. I have used LPT 1 as my interface for CW keying. I
recently switched to a new computer with XP OS. With this configuration rig
control is as previously but I get the error msg Can't find LPT1 for
I recall a recent thread referring to a missing driver when CW keying via
LPT port when using XP. Can anyone direct me to that info. I am not able to
key using XP Home.
Howard..K2HK
_
Tired of spam? Get advanced junk mail
Greetings all and Happy Holidays;
I've been spending some quality time with my IC 706MKIIG since it is
the
only spare radio I have to use at my new station. I've investigated the
computer controlled interface I need to control the rig and found some
great resources on the internet
Hello,
I use a TS-830S. My CW interface works fine with CT (on LPT1), but when I
try to use DX4WIN, it keys but doesn't release. In otherwords, the rig just
stays keyed whenever I start a character. Any ideas on how this can be
fixed would be appreciated. Using WIN 98SE. Thanks.
73 de Moe
Hi, I have a new computer with windows XP
I installed a parallel card in a PCI slot and called it LPT2
DX4win loads and says can't open cw driver I have lpt2 setup in programs
as keying port.
What's wrong? Is it XP?
Also CT won't key either only get one garbled transmission from inside
computer.
You must reinstall DX4WIN, not reuse or copy it. During the new install it
will choose the correct drivers.
73, John, K2CIB
- Original Message -
From: wo2n [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Saturday, November 16, 2002 9:11 PM
Subject: [Dx4win] CW keying
Hi, I have
Is there any reason that one cannot use a wye connector out of the back
of the rig's key jack (in this case a 1000MP) and hook both a set of
paddles and the LPT1 connection to the station PC? The LPT1 circuit is
the one shown in the Help file of DX4WIN, using a 2N.
Larry, that is OK if
@mailman.qth.net
Subject: [Dx4win] CW Keying
Is there any reason that one cannot use a wye connector out of
the back
of the rig's key jack (in this case a 1000MP) and hook both a set
of
paddles and the LPT1 connection to the station PC? The LPT1
circuit is
the one shown in the Help file of DX4WIN, using
: WA9ALS - John [SMTP:[EMAIL PROTECTED]
Sent: Saturday, November 09, 2002 6:48 PM
To: Larry Burke WI5A; Dx4win@mailman.qth.net
Subject:Re: [Dx4win] CW Keying
Is there any reason that one cannot use a wye connector out of the back
of the rig's key jack (in this case a 1000MP) and hook both
45 matches
Mail list logo
