Hi Walt,
I don't understand this part:
If I am on CW and I grab an SSB spot, the frequency I'm taken to is
offset (low) from the actual frequency by the amount of the offset
Amount of what offset?
There are two Pro III .RIG files, try both and see if the problem
changes/goes away. The B
Hello,
Same thing with FT-1000D here. I have CW display offset set to
400 Hz, i.e. when I listen to a CW signal with 400 Hz pitch, the
display shows his true frequency. But now DX4WIN sends me 400 Hz
HIGHER than that the first time I click.
with a second click I arrive at the correct frequency
Hi all,
Yes the CAT part of the program is changed , Paul and I spend much time in
solving the problem
For the OMNIVII rig and the K3 rig, but didn´t found or have any problems
with my IC7800.
If you are aware how to change a rigfile via the radio database (closed log
)
you can try
Hi Jim,
The CW pitch control changes the offset I use for copying CW. Let's assume
I am using 500 Hz for the CW pitch and the CW pitch control is set to 500
Hz.
Assuming I'm on CW and I grab an SSB spot by double clicking an SSB station
in the DX spots window which happens to be on 14,250.00
Guy and Walt,
The problem does not appear to be in the rig filesand slowing the
command processing doesnt appear to be the cure. I have tried to use delays
in the file for the Yaesu FT9000/ 2000 and everything works in 7.05.
In the Yaesu series of radios, there is a menu
I tried changing the freq resolution to 1Hz on PRO III. Sometimes it's
ok, mostly the CW offset pitch is there until a second double click.
73 Erkki OH2BF
-Original Message-
From: dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Louis Dietrich
Sent:
Oh yea, how do I edit the rig database. I can find no value of 100ms in the
editor,
except for the timeout of 5 seconds.
What are we the beta test site for the new versions of this product? Sounds
like Windows philosophy, if no one notices al is AOK.
Disgrumbled Regards,
I don't understand why ALL the rest of us have to change when you made
adjustments for just 2 radios. Maybe this is why Steve washed his hands of
this product.
Regards,
Walt Kornienko K2WK
Lou,
In my case I dont have the problem with ICOM but a delay is needed for the
OMNI-VII
Otherwise something is going wrong with the mode. So trying with a delay
wouldn´t arm in ICOM radios to.
BTW the biggest problem with ALL the radios on the market is that there is
no standard
Guy,
You are 100% correct! There are no standards. Even for the most used
commands like set VFO A, Set VFO B, read VFO A, etc...
Yaesu is currently updating their CAT Operations Manual and it may be posted
this week and they are standardizing the commands for the FT2000, 950 and
9000, but
WALT ,
In my reply I wrote
¨If you are aware how to change a rigfile via the radio database (closed log
)¨
¨you can try to give a little delay (100ms) next to the command line for ¨
You are not on the correct place to modify or try something out
If you compare my suggestions
If the people who provide the software will not support it, then this is
worse than Microsoft.
Bob Serwy - N9RS
_
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of ON4AOI
Sent: Thursday, December 11, 2008 2:35 PM
To: k2wa...@gmail.com
Cc:
Well, not a big deal, I seldom click a spot. And we can always go back
to 705. After all, 7.06 had practically nothing new except the support
for OMNI and K3 (and of course Jim's new country etc files).
But I hate updates - I always forget something - including the backup
automation...
73 Erkki
Come'on guys, give Paul et al a break. It dang difficult to support
all these rigs especially when you can't own them all. The K3 issues
have been escalating the temperature and they tried something to fix
it and it introduced another problem. Fall back to 7.05 and let them
figure it out,
Paul,
I have a similar experience here with my Yaesu FT-920. Grabbing the
spots places them 'offset' by 700 hz, which is my CW offset.
I returned to version 7.05.03 and do not have the problem.
73 Ernie W8EH
k2wa...@gmail.com wrote:
Hey all,
Version: DX4Win 7.06.02
Rig: IC756
Guy,
As far as I can see, the rig files are identical to previous
versions. In FT-1000 the offset is added internally direct to
the display. It looks like v.7.06 now is adding an offset to
the actual frequency before it is sent to the radio every time
when a change of mode command is sent. This
Kjell W. Strom wrote:
*Guy,*
**
*As far as I can see, the rig files are identical to previous versions.
In FT-1000 the offset is added internally direct to the display. It
looks like v.7.06 now is adding an offset to the actual frequency before
it is sent to the radio every time when a
Roger,
It's not a big deal and as long as you stay with one mode, you
won't notice it. If it happens, you can get it right by clicking
on the spot a second time.
Anybody, who has written more than two lines of programming
code, knows how difficult it is to avoid small mishaps like
this, when
Hi
Using Mixw you can see DX Spot put this informations:
server: www.dxsummit.fi
port: 80andpage: /text/dx25.html
WWW page: /dxs/wwv25.html?
How can I do the same ( see DX Spot page) in DX4WIN? I do not have a TNC only a
Notebook + DSL and Rig?
How can I connect via TELNET?
Yes, I did an very simple interface until I am waiting a professional solution.
I have asked about the better interface and received many ideas: Many thanks
for all - Costa, and many friends.
Well, until I am waiting to receive winkey and microham I build an very simple
interface: USB/RS232.
Hi all...
DX4WIN 7.06 doesn't change mode on my FT-897D. I am using a home-modified
rig file. I checked with the original rig file for the FT-897 and it
doesn't work too.
The frequency is set correctly (no offset), but the radio behaves like if I
had checked Ignore mode in real time. I
To support the K3, the sequence of set mode / set frequency was changed.
It appears that this change cannot be applied to all radios, so I will
make this an option in the radio file.
--Paul
--
~~~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
Bob,
I am NOT on the payroll of DX4WIN.
I am only trying to help people in my free time
Instead of being on the radio.
End of discussion
Guy ON4AOI
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Bob Serwy
Verzonden: donderdag 11 december
Hello Mac,
Download the latest cluster database file (DX4WIN.TCP) from:
http://dx4win.ad1c.us/cluster.htm
Make sure your Packet Window is open. If it is not, check your
Packet1 preferences, make sure that Type is set to Regular and
COM Port is set to TCP/IP.
With the Packet Window open,
24 matches
Mail list logo