Re: [Dx4win] Freq doesn't change properly when clicking a spot.
Hi Walt, I don't understand this part: If I am on CW and I grab an SSB spot, the frequency I'm taken to is offset (low) from the actual frequency by the amount of the offset Amount of what offset? There are two Pro III .RIG files, try both and see if the problem changes/goes away. The B flavor doesn't work with my rig. I have a Pro III at home, I can try this tonight. 73 - Jim AD1C 2008/12/11 k2wa...@gmail.com: Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency I'm taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didn't exhibit this behavior. -- Jim Reisert AD1C/Ø, jjreis...@alum.mit.edu, http://www.ad1c.us Let Not Mankind Bogart Love - Willie Nelson ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] Freq doesn't change properly when clicking a spot.
Hello, Same thing with FT-1000D here. I have CW display offset set to 400 Hz, i.e. when I listen to a CW signal with 400 Hz pitch, the display shows his true frequency. But now DX4WIN sends me 400 Hz HIGHER than that the first time I click. with a second click I arrive at the correct frequency for the spotted station. But if I next click once on an SSB spot, the radio is sent to a frequency which is 400 Hz LOWER than the spotted frequency. Again, a second click sets the radio to the actual spot frequency. 73 de Kjell, PB3SM - SM6CPI -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Louis Dietrich Sent: 11 December 2008 19:51 To: 'Jim Reisert AD1C'; k2wa...@gmail.com Cc: dx4win@mailman.qth.net Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Jim, I posted this a few days agoIt was in regard to my FT2000 and FT 9000... DX4Winers, and Paul I am experiencing some problems with the latest version... Using identical rig files, as we used in 7.05.03 , here's what is happening in 7.06.02. 1. If the rig is on SSB and I click on a CW spot, say 7044, the rig goes to 7044.7. If I click on the same spot again, the rig shows 7044... 2. If I then click on another CW spot, the rig goes to the correct frequency. 3. If I then click on a SSB spot 14185 (Rig still on CW), the rig goes to 14184.3. If I click on the same spot, the frequency read 14185... Something has changed in the latest version of DX4WIN I have switched back and forth between the versions...and have the same rig files in both Can anyone else verify the above? Sounds like a similar problemthere is definitely something different in the latest versionI cleared my problem by changing the offset frequency in both rigs, which is the first time I ever had to do that... 73 Lou N2TU -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jim Reisert AD1C Sent: Thursday, December 11, 2008 1:01 PM To: k2wa...@gmail.com Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Freq doesn't change properly when clicking a spot. Hi Walt, I don't understand this part: If I am on CW and I grab an SSB spot, the frequency I'm taken to is offset (low) from the actual frequency by the amount of the offset Amount of what offset? There are two Pro III .RIG files, try both and see if the problem changes/goes away. The B flavor doesn't work with my rig. I have a Pro III at home, I can try this tonight. 73 - Jim AD1C 2008/12/11 k2wa...@gmail.com: Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency I'm taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didn't exhibit this behavior. -- Jim Reisert AD1C/Ø, jjreis...@alum.mit.edu, http://www.ad1c.us Let Not Mankind Bogart Love - Willie Nelson ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] Freq doesn't change properly when clicking a spot.
Hi all, Yes the CAT part of the program is changed , Paul and I spend much time in solving the problem For the OMNIVII rig and the K3 rig, but didn´t found or have any problems with my IC7800. If you are aware how to change a rigfile via the radio database (closed log ) you can try to give a little delay (100ms) next to the command line for set vfo A or set vfo B or set mode or set mode B make sure you make a backup of the rigfile first !!! In the omniVII file we had to put a 100ms delay in one cmdline because the radio couldn´t process the correct sended commands. Guy ON4AOI Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Namens k2wa...@gmail.com Verzonden: donderdag 11 december 2008 18:21 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot. Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency Im taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didnt exhibit this behavior. Regards, Walt Kornienko - K2WK Gordonsville, VA 22942-6110 k2wa...@gmail.com k...@arrl.net ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] Freq doesn't change properly when clicking a spot.
Guy and Walt, The problem does not appear to be in the rig filesand slowing the command processing doesnt appear to be the cure. I have tried to use delays in the file for the Yaesu FT9000/ 2000 and everything works in 7.05. In the Yaesu series of radios, there is a menu FRQDISP...by changing it to DIR, the 7.06 problem disappeared. (Thanks John, W9ROM) Is there a similar Menu item in ICOM...at least, you can fix the problem as Paul figures out what happened in 7.06. By fixing the Omni VII and K3, we seem to have broken the other rigs CAT. The FT2000 and 9000 have very quick processors and can handle the commands...so the problem is probably elsewhere. BTW, for anyone interested, I have a new rig file for the updated FT9000 PEP rigs...if you need it, please contact me off the reflector... 73, Lou N2TU _ From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: Thursday, December 11, 2008 2:33 PM To: k2wa...@gmail.com Cc: dx4win@mailman.qth.net Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Hi all, Yes the CAT part of the program is changed , Paul and I spend much time in solving the problem For the OMNIVII rig and the K3 rig, but didn´t found or have any problems with my IC7800. If you are aware how to change a rigfile via the radio database (closed log ) you can try to give a little delay (100ms) next to the command line for set vfo A or set vfo B or set mode or set mode B make sure you make a backup of the rigfile first !!! In the omniVII file we had to put a 100ms delay in one cmdline because the radio couldn´t process the correct sended commands. Guy ON4AOI Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Namens k2wa...@gmail.com Verzonden: donderdag 11 december 2008 18:21 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot. Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency Im taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didnt exhibit this behavior. Regards, Walt Kornienko - K2WK Gordonsville, VA 22942-6110 k2wa...@gmail.com k...@arrl.net ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] Freq doesn't change properly when clicking a spot.
I tried changing the freq resolution to 1Hz on PRO III. Sometimes it's ok, mostly the CW offset pitch is there until a second double click. 73 Erkki OH2BF -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Louis Dietrich Sent: Thursday, December 11, 2008 9:48 PM To: 'ON4AOI'; k2wa...@gmail.com Cc: dx4win@mailman.qth.net Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Guy and Walt, The problem does not appear to be in the rig filesand slowing the command processing doesnt appear to be the cure. I have tried to use delays in the file for the Yaesu FT9000/ 2000 and everything works in 7.05. In the Yaesu series of radios, there is a menu FRQDISP...by changing it to DIR, the 7.06 problem disappeared. (Thanks John, W9ROM) Is there a similar Menu item in ICOM...at least, you can fix the problem as Paul figures out what happened in 7.06. By fixing the Omni VII and K3, we seem to have broken the other rigs CAT. The FT2000 and 9000 have very quick processors and can handle the commands...so the problem is probably elsewhere. BTW, for anyone interested, I have a new rig file for the updated FT9000 PEP rigs...if you need it, please contact me off the reflector... 73, Lou N2TU From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: Thursday, December 11, 2008 2:33 PM To: k2wa...@gmail.com Cc: dx4win@mailman.qth.net Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Hi all, Yes the CAT part of the program is changed , Paul and I spend much time in solving the problem For the OMNIVII rig and the K3 rig, but didn´t found or have any problems with my IC7800. If you are aware how to change a rigfile via the radio database (closed log ) you can try to give a little delay (100ms) next to the command line for set vfo A or set vfo B or set mode or set mode B make sure you make a backup of the rigfile first !!! In the omniVII file we had to put a 100ms delay in one cmdline because the radio couldn´t process the correct sended commands. Guy ON4AOI Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Namens k2wa...@gmail.com Verzonden: donderdag 11 december 2008 18:21 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot. Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency Im taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didnt exhibit this behavior. Regards, Walt Kornienko - K2WK Gordonsville, VA 22942-6110 k2wa...@gmail.com k...@arrl.net ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] Freq doesn't change properly when clicking a spot.
I don't understand why ALL the rest of us have to change when you made adjustments for just 2 radios. Maybe this is why Steve washed his hands of this product. Regards, Walt Kornienko K2WK Gordonsville, VA -Original Message- From: ON4AOI [mailto:on4...@skynet.be] Sent: Thursday, December 11, 2008 2:33 PM To: k2wa...@gmail.com Cc: dx4win@mailman.qth.net Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Hi all, Yes the CAT part of the program is changed , Paul and I spend much time in solving the problem For the OMNIVII rig and the K3 rig, but didn´t found or have any problems with my IC7800. If you are aware how to change a rigfile via the radio database (closed log ) you can try to give a little delay (100ms) next to the command line for set vfo A or set vfo B or set mode or set mode B make sure you make a backup of the rigfile first !!! In the omniVII file we had to put a 100ms delay in one cmdline because the radio couldn´t process the correct sended commands. Guy ON4AOI Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Namens k2wa...@gmail.com Verzonden: donderdag 11 december 2008 18:21 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot. Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency Im taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didnt exhibit this behavior. Regards, Walt Kornienko - K2WK Gordonsville, VA 22942-6110 k2wa...@gmail.com k...@arrl.net ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] Freq doesn't change properly when clicking a spot.
Lou, In my case I dont have the problem with ICOM but a delay is needed for the OMNI-VII Otherwise something is going wrong with the mode. So trying with a delay wouldn´t arm in ICOM radios to. BTW the biggest problem with ALL the radios on the market is that there is no standard Not even in there own company they have a standard look to all the problems with the ft2000 and ft9000 All ICOM radios can´ t read VFO-B, setting is OK , I sended dozens of mail complaining about this to ICOM Did you get an answer? For sure I didn´t. Guy ON4AOI Van: Louis Dietrich [mailto:n...@roadrunner.com] Verzonden: donderdag 11 december 2008 20:48 Aan: 'ON4AOI'; k2wa...@gmail.com CC: dx4win@mailman.qth.net Onderwerp: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Guy and Walt, The problem does not appear to be in the rig filesand slowing the command processing doesnt appear to be the cure. I have tried to use delays in the file for the Yaesu FT9000/ 2000 and everything works in 7.05. In the Yaesu series of radios, there is a menu FRQDISP...by changing it to DIR, the 7.06 problem disappeared. (Thanks John, W9ROM) Is there a similar Menu item in ICOM...at least, you can fix the problem as Paul figures out what happened in 7.06. By fixing the Omni VII and K3, we seem to have broken the other rigs CAT. The FT2000 and 9000 have very quick processors and can handle the commands...so the problem is probably elsewhere. BTW, for anyone interested, I have a new rig file for the updated FT9000 PEP rigs...if you need it, please contact me off the reflector... 73, Lou N2TU _ From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: Thursday, December 11, 2008 2:33 PM To: k2wa...@gmail.com Cc: dx4win@mailman.qth.net Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Hi all, Yes the CAT part of the program is changed , Paul and I spend much time in solving the problem For the OMNIVII rig and the K3 rig, but didn´t found or have any problems with my IC7800. If you are aware how to change a rigfile via the radio database (closed log ) you can try to give a little delay (100ms) next to the command line for set vfo A or set vfo B or set mode or set mode B make sure you make a backup of the rigfile first !!! In the omniVII file we had to put a 100ms delay in one cmdline because the radio couldn´t process the correct sended commands. Guy ON4AOI Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Namens k2wa...@gmail.com Verzonden: donderdag 11 december 2008 18:21 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot. Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency Im taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didnt exhibit this behavior. Regards, Walt Kornienko - K2WK Gordonsville, VA 22942-6110 k2wa...@gmail.com k...@arrl.net ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] Freq doesn't change properly when clicking a spot.
Guy, You are 100% correct! There are no standards. Even for the most used commands like set VFO A, Set VFO B, read VFO A, etc... Yaesu is currently updating their CAT Operations Manual and it may be posted this week and they are standardizing the commands for the FT2000, 950 and 9000, but I do not know about ICOM. As for the current offset problem, inserting delays did not help the Yaesu radios. 73 Lou N2TU _ From: ON4AOI [mailto:on4...@skynet.be] Sent: Thursday, December 11, 2008 3:09 PM To: 'Louis Dietrich' Cc: dx4win@mailman.qth.net Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Lou, In my case I dont have the problem with ICOM but a delay is needed for the OMNI-VII Otherwise something is going wrong with the mode. So trying with a delay wouldn´t arm in ICOM radios to. BTW the biggest problem with ALL the radios on the market is that there is no standard Not even in there own company they have a standard look to all the problems with the ft2000 and ft9000 All ICOM radios can´ t read VFO-B, setting is OK , I sended dozens of mail complaining about this to ICOM Did you get an answer? For sure I didn´t. Guy ON4AOI Van: Louis Dietrich [mailto:n...@roadrunner.com] Verzonden: donderdag 11 december 2008 20:48 Aan: 'ON4AOI'; k2wa...@gmail.com CC: dx4win@mailman.qth.net Onderwerp: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Guy and Walt, The problem does not appear to be in the rig filesand slowing the command processing doesnt appear to be the cure. I have tried to use delays in the file for the Yaesu FT9000/ 2000 and everything works in 7.05. In the Yaesu series of radios, there is a menu FRQDISP...by changing it to DIR, the 7.06 problem disappeared. (Thanks John, W9ROM) Is there a similar Menu item in ICOM...at least, you can fix the problem as Paul figures out what happened in 7.06. By fixing the Omni VII and K3, we seem to have broken the other rigs CAT. The FT2000 and 9000 have very quick processors and can handle the commands...so the problem is probably elsewhere. BTW, for anyone interested, I have a new rig file for the updated FT9000 PEP rigs...if you need it, please contact me off the reflector... 73, Lou N2TU _ From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: Thursday, December 11, 2008 2:33 PM To: k2wa...@gmail.com Cc: dx4win@mailman.qth.net Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Hi all, Yes the CAT part of the program is changed , Paul and I spend much time in solving the problem For the OMNIVII rig and the K3 rig, but didn´t found or have any problems with my IC7800. If you are aware how to change a rigfile via the radio database (closed log ) you can try to give a little delay (100ms) next to the command line for set vfo A or set vfo B or set mode or set mode B make sure you make a backup of the rigfile first !!! In the omniVII file we had to put a 100ms delay in one cmdline because the radio couldn´t process the correct sended commands. Guy ON4AOI Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Namens k2wa...@gmail.com Verzonden: donderdag 11 december 2008 18:21 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot. Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency Im taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didnt exhibit this behavior. Regards, Walt Kornienko - K2WK Gordonsville, VA 22942-6110 k2wa...@gmail.com k...@arrl.net ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] Freq doesn't change properly when clicking a spot.
I have a similar experience here with my Yaesu FT-920. Grabbing the spots places them 'offset' by 700 hz, which is my CW offset. I returned to version 7.05.03 and do not have the problem. 73 Ernie W8EH k2wa...@gmail.com wrote: Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency I'm taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didn't exhibit this behavior. Regards, Walt Kornienko - K2WK Gordonsville, VA 22942-6110 k2wa...@gmail.com k...@arrl.net ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] Freq doesn't change properly when clicking a spot.
Guy, As far as I can see, the rig files are identical to previous versions. In FT-1000 the offset is added internally direct to the display. It looks like v.7.06 now is adding an offset to the actual frequency before it is sent to the radio every time when a change of mode command is sent. This may be right for the two rigs you had problems with, but not for the 98 percent which worked OK before. You must step backwards to the point where the fix was applied and make sure that it is limited to the few problem radios. Maybe Paul can get away by adding an IF...ELSE statement... 73, Kjell, PB3SM - SM6CPI _ From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: 11 December 2008 20:33 To: k2wa...@gmail.com Cc: dx4win@mailman.qth.net Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot. Hi all, Yes the CAT part of the program is changed , Paul and I spend much time in solving the problem For the OMNIVII rig and the K3 rig, but didn´t found or have any problems with my IC7800. If you are aware how to change a rigfile via the radio database (closed log ) you can try to give a little delay (100ms) next to the command line for set vfo A or set vfo B or set mode or set mode B make sure you make a backup of the rigfile first !!! In the omniVII file we had to put a 100ms delay in one cmdline because the radio couldn´t process the correct sended commands. Guy ON4AOI Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Namens k2wa...@gmail.com Verzonden: donderdag 11 december 2008 18:21 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot. Hey all, Version: DX4Win 7.06.02 Rig: IC756 Pro III If I am on CW and I grab an SSB spot, the frequency Im taken too is offset (low) from the actual frequency by the amount of the offset I use on CW. A second double click on the spot corrects this anomaly. Any ideas as to what is causing this problem? Previous versions, i.e. dx4win7.05 didnt exhibit this behavior. Regards, Walt Kornienko - K2WK Gordonsville, VA 22942-6110 k2wa...@gmail.com k...@arrl.net ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] Freq doesn't change properly when clicking a spot.
Kjell W. Strom wrote: *Guy,* ** *As far as I can see, the rig files are identical to previous versions. In FT-1000 the offset is added internally direct to the display. It looks like v.7.06 now is adding an offset to the actual frequency before it is sent to the radio every time when a change of mode command is sent. This may be right for the two rigs you had problems with, but not for the 98 percent which worked OK before. * ** *73,* Kjell, PB3SM - SM6CPI My FT-1000D seems to work fine. Using V7.06.02 73, Roger -- Remember the USS Liberty (AGTR-5) http://ussliberty.org/ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] Freq doesn't change properly when clicking a spot.
Roger, It's not a big deal and as long as you stay with one mode, you won't notice it. If it happens, you can get it right by clicking on the spot a second time. Anybody, who has written more than two lines of programming code, knows how difficult it is to avoid small mishaps like this, when changes are made. I am sure that Paul Co will have it under control soon. Have fun, Kjell, PB3SM - SM6CPI My FT-1000D seems to work fine. Using V7.06.02 73, Roger -- Remember the USS Liberty (AGTR-5) http://ussliberty.org/ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] Freq doesn't change properly when clicking a spot.
Hi all... DX4WIN 7.06 doesn't change mode on my FT-897D. I am using a home-modified rig file. I checked with the original rig file for the FT-897 and it doesn't work too. The frequency is set correctly (no offset), but the radio behaves like if I had checked Ignore mode in real time. I tested both (Ignore and non-ignore) with no success. I am going back to release 7.05... By the way, I am still waiting for a way to set split frequencies properly on the FT-897... :( Best 73 de Isidro, EA8NQ E-mail: ea8...@hotmail.com (remove the _ ) Visit the EA8NQ's web page (in Spanish): http://ea8nq.ure.es/ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] Freq doesn't change properly when clicking a spot.
To support the K3, the sequence of set mode / set frequency was changed. It appears that this change cannot be applied to all radios, so I will make this an option in the radio file. --Paul -- ~~~ DX4WIN logging software Paul van der Eijk, KK4HD BrookHill Data Systems LLC http://www.dx4win.com Erkki Heikkinen wrote: Same here, also when clicking from SSB to CW spot. Actually with all spots. Must be something in the program as I use the same radio file as earlier. 73 Erkki OH2BF ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
