Yes. But only on dx4w604.exe, not the current version. The threat was
identified as WinFixer.
Larry Burke WI5A
Lima, Ohio
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Stan Staten
Sent: Thursday, February 02, 2006 6:45 AM
To: DX4WIN
Subject
irmed QSOs from
LoTW to DX4WIN, the only QSOs showing an "Upl Cnf" are those that also show
a country in the final column of the LoTW table of confirmed QSOs on the
website.
I selected "Show Details" when performing the download.
What did I do wrong?
Larry Burke K5RK
Brazoria County Texas
urphy" <[EMAIL PROTECTED]>
To: "DX4WIN Reflector"
Sent: Wednesday, February 27, 2008 4:34 PM
Subject: Re: [Dx4win] LoTW Question
> On Wed, Feb 27, 2008 at 12:59 PM, Larry Burke <[EMAIL PROTECTED]> wrote:
>>
>> Thanks for the reply, Rick. Guess I am ei
I am in the process of ordering new QSL cards and I would like to be able to
print the DX4WIN "label" directly on the card. I found a few references to
this in the archives, but I am having a couple of problems. One is getting
the "label" to print in the correct spot (which, in my case, is the ce
everyone who sent me ideas and their Label Editor settings via
screen shots.
73, Larry K5RK
> __
> From: Larry Burke [mailto:w...@sbcglobal.net]
> Sent: Saturday, December 27, 2008 11:09 AM
> To: 'DX4WIN POSTINGS'
&g
p describes one of them.
Also note that what I have documented only eliminates the label, it does not
fill-in-the-blanks on a QSO box that is pre-printed on a commercially
produced QSL card.
Larry K5RK
w...@sbcglobal.net
> __
> From:
WAZ
and Country windows? It's also not in the Reports. I have 60m checked in the
Station tab of the Preferences. Not sure what I am missing.
Some strange things with the CW totals, too, but I haven't dug into that
enough to ask an intelligent question.
Larry Burke K5RK
Brazoria Co
l get this
message. Is this normal with this version of Windows? Do I need an updated
driver?
Larry Burke K5RK
Brazoria County Texas
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailm
Question below was originally posed to the microHAM reflector, but I was
advised it's an issue with DX4WIN. I'm not entirely convinced it's not
operator (me) error. Anyone else have the problem listed below or know of a
solution?
Larry K5RK
From: micro...@yahoogroups.com [mailto:micro...
K5RK
-Original Message-
From: Jim Reisert [mailto:jjreis...@gmail.com] On Behalf Of Jim Reisert AD1C
Sent: Sunday, December 06, 2009 5:54 PM
To: Larry Burke
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] microKEYER II Question
Hi Larry,
I just re-read your message. There is no need to
Thanks for the tip, Jim. Pretty good prices.
I have been using the larger APC ("Back-UPS" XS 1500 watt). Worked great
until I bought a new Dell. Now the PC dies every time there is a voltage
dip. Everything else on the UPS makes it through an outage just fine. This
model puts out a stepped sine w
Dave, I print directly to the non-glossy back of a photo card with no
problems. The printer is an HP LaserJet P2015d. I prepared a how-to document
to show how to set up DX4WIN to do the printing (spacing, etc) if you are
interested.
Larry K5RK
-Original Message-
From: dx4win-boun...@mai
Is there an easy way to convert the "DXCC QSL Download" adif file from the
LoTW website to an Excel, Word or pdf file? I'd prefer to do this outside of
DX4WIN and would prefer conversion to Excel.
Larry K5RK
__
DX4WIN mailing list
Ho
Hi, Jim the heading on the page says "Logbook of the World ADIF to CSV".
What am I missing?
Larry
-Original Message-
From: jjreis...@gmail.com [mailto:jjreis...@gmail.com] On Behalf Of Jim
Reisert AD1C
Sent: Monday, September 16, 2013 3:10 PM
To: Larry Burke
Cc: DX4WIN
I may be doing
wrong?
- Larry K5RK
From: Larry Burke [mailto:w...@sbcglobal.net]
Sent: Monday, September 16, 2013 8:51 AM
To: 'DX4WIN Reflector (dx4win@mailman.qth.net)'
Subject: ADIF to Excel, Word or PDF
Is there an easy way to convert the "DXCC QSL Download&qu
I worked and confirmed SV2ASP/A on 40 meters on April 7, 2010. He shows up
as confirmed in my log for Mt Athos, yet neither the QSO nor the
confirmation carry over to the Country window or to any DXCC Reports. I've
worked Monk Apollo on several other bands and the log maps properly to the
Country w
ul van der Eijk [mailto:pvandere...@gmail.com]
Sent: Thursday, November 07, 2013 8:08 AM
To: Larry Burke
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Mt Athos Not Appearing in Country Totals on 40 Meters
Larry,
I see nothing special with that QSO when entered in the log.
Do you have an R
Rich... if you keep your .cty file up to date DX4WIN should recognize K1N as
Navassa automatically. If you have an old .cty file you can use the F1 key
in the "Prefix" field and select Navassa. I would not recommend logging as
KP1/K1N as you will not get a match should you ever upload to LoTW.
Lar
I'm trying to log contacts made on the new FT8 mode and it would sure be
nice to see it in the pull-down menu. Even a generic "data" would be useful.
Are there any plans to update the mode menu?
Larry K5RK
__
DX4WIN mailing list
I'm using DX4WIN with an Icom IC-7851. The CAT controls work well however
DX4WIN does not seem to recognize when the rig is set to the DATA mode
(e.g., USB-D1). DX4WIN just sees the rig as being in the SSB mode. Is there
a way to have DX4WIN recognize when the rig is in the DATA mode?
Larry K5R
There may be other ways, but here's what I do.
In DX4WIN:
* File > Import/Export
* In the window that opens select "ADIF"
* File > Import
* Navigate to where your "wsjt_log.adi" file is located and select it
* When pop-up window asks how to handle duplicate QSOs
Not sure how, but I have managed to show all of my FT8 QSOs as LoTW
confirmed (LCnf = Y) in DX4WIN. As near as I can tell, it's only the FT8
QSOs but I have not performed an exhaustive search to be sure other modes
are not affected.
I'd like to correct this by removing all the Y's in the LCnf
I don't know about as well - but
I still feel stupid after seeing how easy this was.
Now if I only knew what I did to mess the log up in the first place.
Larry K5RK
From: Larry Burke
Sent: Wednesday, October 30, 2019 5:22 PM
To: 'dx4win@mailman.qth.net'
Subje
I'm feeling a bit ignorant on how to create a report showing the grids I
have worked for credit towards the Fred Fish Memorial Award (488 US mainland
grids). I've never had the need to create a custom report until now, so
this part of my DX4WIN experience is lacking.
I have the Custom Award D
Cizek W0VTT
Sent: Thursday, June 17, 2021 8:15 AM
To: 'Larry Burke' ; DX4WIN@mailman.qth.net
Subject: RE: [Dx4win] FFMA in Custom Database
Hello Larry,
There are better tools for tracking FFMA. When you use one of the custom
awards in dx4win, you must first tell the program to apply a
Thanks, Jim.
From: Jim Reisert AD1C
Sent: Thursday, June 17, 2021 8:52 AM
To: Larry Burke
Cc: Mike Cizek W0VTT ; DX4WIN Reflector
Subject: Re: [Dx4win] FFMA in Custom Database
This might help:
https://dx4win.ad1c.us/VUCC/
I am still working on it.
On Thu, Jun 17, 2021
Another data point, if anyone is collecting them I am using the
following versions and I am NOT having this problem:
Firefox 102.0.1, 64-bit
Windows 10 Home Version 21H1, Build 19043.1826
Larry K5RK
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of cont...@oz0j.dk
Posted this question a couple of weeks ago, but got no replies. Wonder if
anyone can suggest what to look at to get my "system beep" back the one
that notifies you that a new band/mode country has been spotted. It used
to work, then just disappeared not sure what I might have d
pened to me just a week or so ago. My system beep
>stopped working.
>
>Dave, N4QS
>[EMAIL PROTECTED]
>
>- Original Message -
>From: Larry Burke WI5A <[EMAIL PROTECTED]>
>To:
>Sent: Monday, December 31, 2001 9:56 PM
>Subject: [Dx4win] No System Beep
>
.
> J Sartain KC4ALG
>[EMAIL PROTECTED]
>- Original Message -
>From: "Larry Burke WI5A" <[EMAIL PROTECTED]>
>To:
>Sent: Tuesday, January 01, 2002 9:26 PM
>Subject: Re: [Dx4win] No System Beep
>
>
> >
> > I'm blaming bin Laden,
Voice and CW alerts work just fine with me. The system alert does not work,
even on the internal PC speaker (with the sound card turned off).
Larry
At 10:30 PM 1/1/02 -0500, you wrote:
>At 09:11 PM 1/1/02 -0600, you wrote:
> >I have checked my preferences settings, sent commands to the cluster
Comment made in an earlier thread:
> Besides, some people, like myself, rarely send any QSL's out direct to
> managers, but use a service, such as WF5E provides.
Just a reminder that, according to the WF5E QSL Service web site, YT1AD
(one of the K1B managers) does not accept cards via the WF5
Is there any reason that one cannot use a wye connector out of the back
of the rig's key jack (in this case a 1000MP) and hook both a set of
paddles and the LPT1 connection to the station PC? The LPT1 circuit is
the one shown in the Help file of DX4WIN, using a 2N2222.
Larry Burke
ssue. thanks to whoever suggested the use of "Callsign
Alert" during the TO4E operations. While I knew this feature was out
there, I had really never used it. It proved to be a useful tool in
trying to pinpoint their somewhat erratic operations -- even after I had
worked them on a particular ban
Is anyone besides me having the TO4E spots come up as blue text against
a white background (priority 4) when Europa is needed for a new
band-country? Ordinarily a new band-country would be white text on a red
background (priority 3). Think a similar issue came up on the reflector
several months ago
SM4WGB
Sent: Thursday, November 27, 2003 8:38 AM
To: Larry Burke WI5A
Cc: dx4win@mailman.qth.net
Subject: RE: [Dx4win] Mapping specific callsigns to a Country (TO4E)
Hello
It might be that the default DXCC for prefix TO is France F. And so it
is in your log. And for you F is not so high priority
36 matches
Mail list logo