I just set the K3 to factory defaults and started over. Doing pretty
well so far in replacing my preferred settings. But... I can't
remember how to save everything on a per band basis, like filter
settings in diversity, internal tuner settings per band, power mic
settings.
Each band has
I'm looking for a Inrad 710L 8215 KHz 6000Hz AM filter for the K3. If
anyone has one you're not using, please contact me off list.
Thanks,
Gary
KA1J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
This is obviously something that should be made available as an
add-on/upgrade to the K3.
Gary
KA1J
The outputs you are looking for exist on the KX3. I don't think they
exist on any other rig.
Larry N8LP
Gary Smith-2 wrote
Ah, I'd never heard of sdr-iq but I just looked
48khz and you
have your feed for the CW Skimmer software.
snip
On 11/28/2012 12:09 AM, Gary Smith wrote:
Ah, I'd never heard of sdr-iq but I just looked for info on it and
for a $500 price tag, I'm not interested. The limitation of +/- 12
KHz with an additional piece
I'm always curious to try a new software I thought CW skimmer looks
interesting. I'm wondering if anyone here is using it with their K3
and if so, what did you find was the best way to connect it to the
K3?
I have both the internal Realtek soundcard built into the PC
motherboard and I have a
.
Even if you decide to go with something else, there's a lot of good
information on the LP-Pan website.
Dave AB7E
On 11/27/2012 10:19 PM, Gary Smith wrote:
I'm always curious to try a new software I thought CW skimmer
looks interesting. I'm wondering if anyone here is using
I use Deka AGM batteries for my motorcycles. They're made in PA and
they're really wonderful batteries, better than any conventional
lead/acid variety I have ever used. I bought mine from
http://www.bohannonbattery.com/ You might find them cheaper locally
but they were the best price I found.
When I was first licensed I bought a then brand new Kenwood 820S from
an Amateur Radio dealer in CT, it was boxed, never opened from
Kenwood. At the same time I ordered all the accessories to go with
it. Within a month I started having display issues and some of the
LED display would be dark.
I just had some repair done to a component for my K3 and wanted to
mention to the list what good service it was. Nice to find products
as well supported as this.
Gary
KA1J
__
Elecraft mailing list
Home:
Assuming you back up your configuration file first, is there any
issue with loading a configuration file from one K3 into another? I
see my serial # is in the name of the file, what if I load one from a
different K3 that also has diversity?
Thanks,
Gary
KA1J
'
capability.
73,
Don W3FPR
On 11/14/2012 5:00 PM, Gary Smith wrote:
Assuming you back up your configuration file first, is there any
issue with loading a configuration file from one K3 into another? I
see my serial # is in the name of the file, what if I load one from
a different K3
By now we all should know what SPAM is by either the header alone or
a non-sensical message link. Sometimes just the link alone with no
real message is the obvious but regardless, don't click on it do
click delete.
Gary
KA1J
__
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I don't know why my text was stripped but
here it is again...
---
I would love for there to be a USB
connection for the K3 without the serial
to USB adapter.
Although I far prefer my Bose Q-15
headphones, I've bought a pair of Logitech
wireless headphones for use with my
] On Behalf Of Gary Smith
Sent: Thursday, November 08, 2012 4:15 PM To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 USB request
I don't know why my text was stripped but here it is again...
---
I would love for there to be a USB
connection for the K3 without the serial
Anyone have a inrad #710L AM filter they don't use and want to sell?
Contact me directly if you do
73,
Gary
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
The tubes in my Alpha 77Sx are the expensive 8877 variety and I would
like to setup the ALC connection between my amplifier and K3 to
prevent overdriving the amp and to back the K3's power down if there
is a drive issue affecting the amp. It appears I will need to get an
ACC connector and use
I find it interesting how time changes things. When I first came here
4 or so years ago everything was K3 related with a smattering of K2
K1 related discussion. Then it was the P3 that was mixed in then
the KPA500 and now it's the KX3.
Although I personally miss the chatter about the K3 and
Interesting the timing of this question, I was about to ask something
quite similar.
I have a Heil desk mic with element HC-4, I've had it since Heil
first
came out with it. It's in a beater HM-5 desk mic frame. I'd like to
get a noise cancelling mic and good fidelity would be nice, I'm not a
I whole-heartedly vote in for the Bose QC-15, or any of their noise
cancelling mics. What they do to the background noise is the best of
If all the competition and they are incredibly comfortable. I prefer
the kind that completely cover your ears but they do make an on the
ears version that
My newly acquired 30 year old amp comes with QSK. As there was a
different relay than came stock I have to assume the circuitry may
have been altered in the past. I have no way to know this.
After two weeks of normal amp behavior I found the T/R vacuum relay
had locked in the transmit
, Don Wilhelm wrote:
Gary,
The config menu TX DLY parameter will change the time from keydown to
the onset of RF.
73,
Don W3FPR
On 10/28/2012 4:09 PM, Gary Smith wrote:
My question for here is; if the amp is not properly sequencing with
the K3, what setting can I change
miles from the
coast.
73 de Brian/K3KO
On 10/28/2012 21:19, Gary Smith wrote:
My TX DLY setting is 015. If I've got it this high and I still had a
problem, this makes it difficult for me to know what to do; I use QSK
much more than any other mode/setting as I chase DX and do not want
RC,
Maybe. If you get a very old amp you may have difficulties with the
keying circuit. More knowledgable people then I am will need to help
you with that. You'll only know that when you investigate the
specific amp. Not all older amps are an issue; I have a 30 year old
Alpha 77SX and run
Anyone have a inrad #710L AM filter they don't use and want to sell?
Contact me directly if you do
73,
Gary
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Mine has gotten flaky and the replacement cost is a bit much. Anyone
have a working KAT3 they don't need?
Offlist please.
Thanks!
Gary
KA1J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I've inadvertently activated a feature I need to undo. Last night I
was making changes with config and it may have happened at that time
but I'm locked on a frequency and can't seem to change it. When I
move the sub receiver frequency with dial B, it shows me the voltage,
time, PLL1, PLL2,
Message-
From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
boun...@mailman.qth.net] On Behalf Of Gary Smith
Sent: Tuesday, October 16, 2012 6:27 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Need a locksmith with the K3
I've inadvertently activated a feature I need to undo
And thank you! I had a 2fer going here had engaged the DISP in
trying to resolve the lock issue!
Nice to be able to get the help when needed. This is a nice
reflector.
Thanks 73,
Gary
KA1J
Tap the DISP button.
On 2012.10.16, at 08:27, Gary Smith g...@ka1j.com wrote:
I've
Anyone using a 77SX or 77DX with their K3 know of any issues I need
to address?
Thanks,
Gary
KA1J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Works fine on other bands. I've tried the
rf calibration on the sub as well as
main and it's working fine. I must have
bumped something somehow as I can't hear
anything other than internal hiss on 160
but on 80, 40 so on the Rx antenna is
apparently working fine.
Anyone well versed in what
Works fine on other bands. I've tried the
rf calibration on the sub as well as
main and it's working fine. I must have
bumped something somehow as I can't hear
anything other than internal hiss on 160
but on 80, 40 so on the Rx antenna is
apparently working fine.
Anyone well versed in what
I have no idea. Works fine on the main rx used to work last year
but I must have unselected something somehow for 160 on the sub.
Is 160 band-mapped in?
73,
Kent K9ZTV
On 9/28/2012 7:14 PM, Gary Smith wrote:
Works fine on other bands. I've tried the
rf
Thanks for the folks that answered. After futsing around with the
settings I now have the solution to this specific dilemma:
I have three filters in the sub and when I entered B Set and played
with the different knobs, I found when I narrowed the filter width,
there came a point where the sub
K3 sub Rx installed.
I rarely use the Rx antenna on the upper bands but today went to work
TN2T on 20 SSB to work split and discovered I don't hear anything Rf
wise coming from the sub Rx. I have no problems with the sub hearing
independently on the other bands used it to find the right
hiss but nowhere do I get Rf with the sub on 20M. All
other bands I do.
Anyone have any specific suggestions what I can try to get the sub
working on 20?
Thanks
Gary KA1J
20m probably has the wrong antenna in it's memory
GB 73
K5OAI
Sam Morgan
On 1/26/2012 2:43 PM, Gary Smith
I've gotten more than a few off list comments on this and every one
has been a good read. I put the idea out and apparently it resonated
(pun intended) with many on the list.
If you want to see just how connected you are to perfect pitch, how
well you can identify random sequences in notes and
Ah rats, I forgot to list the website...
http://jakemandell.com/
Click on Music Tests...
I have the memory of a sieve...
Gary
KA1J
I've gotten more than a few off list comments on this and every one
has been a good read. I put the idea out and apparently it resonated
(pun intended) with
This probably is of little interest to most but I would like the
ability to fine tune the pitch in closer than 10 Hz increments. I'm a
musician and have for practical purposes, perfect pitch. I have my
pitch set at 590 which is the closest approximation to the proper
pitch for D (which is
/2011 12:03 PM, Gary Smith wrote:
This probably is of little interest to most but I would like the
ability to fine tune the pitch in closer than 10 Hz increments. I'm a
musician and have for practical purposes, perfect pitch. I have my
pitch set at 590 which is the closest approximation
with the
fact that, like Heisenberg, you can't have perfect pitch and perfect
tuning at the same time. I'm always asking folks to sing individual
pitches a bit higher or lower than the piano to get the chords to lock!
-kb7psg
On Sun, 11 Dec 2011, Gary Smith wrote
The reality is I put out a simple request and there's always going to
be a select bunch of people who think it shows their prowess to come
up with a smarmy smart ass reply to a request if they don't see any
value in it for themselves.
If there's something that can easily be done I'm hoping
I'm sure this has been brought up before but I'd like a remote VFO A
B.; one that allows me to go split preferably allows power and
filter adjustments: I'm dealing with advancing age and holding my arm
in one extended position to reach the VFO for hunt pounce in a 48
hour contest is
Somehow I've lost the proper settings for the K3 to remember what it
is set for per band. As it is now, say I am on 20M and running CW,
working split, 50W output, filter width 150 cycles I switch to 30M,
all the settings from 20 will apply to all the other bands except the
split will not
Is there a link to info on the benefit of the A version?
I just reviewed the order page see there is the upgrade for this.
I've been out of the loop awhile wonder if this upgrade would be of
interest to me.
Thanks
Gary
KA1J
__
Thanks to the off list reply I just got I understand it's necessary
for the 2 meter option. At this time I'm not going to be adding that
so mystery solved.
Thanks,
Gary
KA1J
Is there a link to info on the benefit of the A version?
I just reviewed the order page see there is the upgrade
I have the internal tuner in my K3 and want to be able to put up a
wire antenna that can be assembled in minutes for both FD and public
event locations. I used to have a Mor-Gain antenna while it wasn't
a great performer, it would have been fine for this use. Danged if I
can find it though, I
Hi,
Haven't been on the air much, the K3 has been unplugged antennae
disconnected just to protect against lightning possibilities. Last I
used the rig, I was mostly on the lower bands, rarely 15 meters or
above.
just for fun I went to check my butternut HF9V to see if there were
any issues
://www.elecraft.com/K3/mods/ELECRAFT_Application_Note_KSYN3_ALC_Rev_A.pdf
~Brett (N7MG)
On Wed, 2010-06-09 at 21:02 -0400, Gary Smith wrote:
Hi,
Haven't been on the air much, the K3 has been unplugged antennae
disconnected just to protect against lightning possibilities. Last I
Hi,
Just trying this and of course it works but I can't seem to find how
to shut off the psk tones when I am sending cw, I hear both my cw and
the psk tones and it's most bothersome hearing that constant whine in
the background when I'm trying to work the iambic.
Looked in the manual but
I find I have a place for a 6 meter beam. I don't have one but would
like to make one if feasible. Does anyone know of good plans for a 6
meter beam that would be realistic to make?
Might as well use the 6M ability of the K3
Thanks,
Gary
KA1J
Wow, many great replies!
I am going to make an antenna for 6M, just seems like the right thing
to do. I am somewhat height challenged as the house is a one story
and the rotor is on a roof mount. Realistic height is probably 25-30'
tops to the top of the rotor. On the other hand, the house is
I've got the K3 and even the precision txco. When I am in most normal
qsos 1:1 I have no issues bring the digital filter to 50Hz and having
a delightful QSO. I do not believe my tx/rx frequency is off.
However during the contest I would narrow the DX to within 200Hz and
call them and so often
when I am using my Rx ant into the sub receiver, I click sub and then
hold Rx-ANT till it says AUx. I have my beverage connected to the BNC
port below ANT2.
If I want to have the K3 preamp on for this Rx antenna but not have
it on for the Inverted L, how do I engage the second receiver so it
I've been looking without success for a used QSK Master to work with
my K3 and Ameritron AL-1500.
The circuit on this page reflects what was in the 2008 QST article on
building your own external QSK box.
http://www.ad5x.com/images/Articles/QSKrevB.pdf
I wonder if anyone has built this and is
I have the Ameritron AL-1500 and it's a powerhouse.
Used to have an Alpha 77SX and that was double this
amp. I like to use power in contests but playing by
the rules is a mandate so over the max legal power
is of no value. I use a factory aligned LP-100A to
keep me legit. This is not A QSK
I remember building my Heathkit 221.. the gem with the 10 meter trap
in it. It was ludicrous the extent they went to make adding 10 meters
difficult so you could have a 220 instead.
I've always felt if they would have made CB on VHF instead of
stealing 11 meters from USA hams, Skip wouldn't
I just posted this to the topband reflector thinking I might get some
help from the folks who know about beverages for low band Dxing.
Perhaps something in my K3 is not configured as well as it should be
and that's maybe a cause of my problems so I'm posting this here as
well. The answer lies
Apologies to the reflector.
If you have a QSK Master excess to your needs and would like to
lighten your parts counter, please contact me directly don't reply
to the list if you would. As we all do know, OT posts should not be
recycled on the ongoing mailing list.
73,
Gary
Gary at ka1j.com
To be honest... I always loved passing the Azimuth table at Dayton.
Yes...
Gary
KA1J
Don't bet on free hats or tee shirts, or scantily-clad women handing them
out. Unless Eric's head counts towards that last...
Got one of those K3 buttons here, from when Eric attended the New England
ARRL
My only current cap I wear is from Bulleit Bourbon... I would wear an
Elecraft cap if I had one...
Gary
Ka1j
Snip
Cor, elecraft freebee hats, you guys do get spoilt over there. I once
got a Yaesu baseball cap at our HF convention years ago, but a K3 cap
would be real cool!
I still have a Vomax Speech Processor I bought new and it was always
stellar. It is a split band processor.
Gary KA1J
--- On Tue, 1/12/10, Jim Brown j...@audiosystemsgroup.com wrote:
All of which is why we've not heard much about folks trying RF
speech processing. :)
73,
Jim K9YC
I
If I would have been the one to decide on size, the height is just
fine with the bail up. I would have made it maybe an inch wider for
increased accessibility for my thick fingers which are marginally
thinner than my head.
I'm the kind of who finds cell phone keypads too small too...
As to
Avast antivirus Comodo firewall have no issues with it
Gary
KA1J
FYI Al. When I click on your link, my anti virus (AVG) pops up and
warns
against a trojan horse virus.
Steve
N4LQ
n...@carolina.rr.com
- Original Message -
From: Al Lorona alor...@sbcglobal.net
To: Elecraft
My take:
35W drives my amp to 1.5KW on CW, can't see the value of a 200W
exciter.
The looks of my K3 are just beautiful. Not as good looking as my
girlfriend but it does just fine in the shack.
;)
Gary
KA1J
Sorry for the misspelling in the original message. It should have
started A
Hi,
I just became aware of the K3DSPUPGD exchange was wondering if
anyone has the ability inclination to make a copy of a simultaneous
reception with the older DSP board the new one.
I'm almost exclusively a CW op and prefer narrow filtered CW,
preferring .05 if possible. I do of course
Correction: I meant to type 250Hz filter, not 150
Tnx,
Gary
Hi,
I just became aware of the K3DSPUPGD exchange was wondering if
anyone has the ability inclination to make a copy of a simultaneous
reception with the older DSP board the new one.
I'm almost exclusively a CW op and
Roger,
I think you may be experiencing the problem I had which I asked about
yesterday
subject: Re: [Elecraft] K3 Firmware update question - k3fw3r68
Check your ports with the elecraft utility, I had the same kind of
issue and I needed to find an open port that gave me 4800 bps.
I never had
Hi,
I started the K3 utility and port 3 is connected at 38400 bps.
I just downloaded the most recent beta firmware, unzipped
k3fw3r68.rar, deleted the current filed from the beta folder, copied
the new files to the beta folder and assured it was the same folder
the utility was pointing at.
On 6 Jan 2010 at 21:24, Gary Smith wrote:
Out of curiosity I looked at some of the other tabs on the K3 utility
like configuration calibration. All the buttons there were greyed
out. I went back to the Ports tab deselected port 3 as mentioned
below told it to select port 6
I respectfully disagree with your suggestion for a magnetic tip. While
it is useful in some (K3 build) situations, I just don't want ANY
magnetic tools on my workbench because they pick up bits of cutoff leads
and magnetize other tools. I routinely de-magnetize all my tools - that
is
Anyone have a LP-PAN in good working condition they want to sell?
Offlist replies please.
Gary
KA1J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Gents Ladies, (you know who you are...
Either Paul's computer is infected or his email address is within
another computer's address book. Seeing as it came to this reflector
my guess is his computer is compromised for it to use his email to be
sent to this reflector. Not necessarily though
I am forever amazed at the extent you all are willing to go to make
the K3 and Elecraft exceptional.
Thanks!
Gary
KA1J
K3 beta-test firmware revision 3.05 (with DSP rev 2.12) is now
available. For details, see the release notes below.
I'll restrain myself...
This... is why I have fish...
Gary
KA1J
How embarrassing is this?
As I was working on the KPA100 last night, the EL5146CN op-amp (a small 8-pin
IC) slipped out of my fingers and fell to the floor - right in front of the
idiot lab/pit mix who promptly decided to
I use these headphones, the QC2. I paid around $100 for them on ebay
over a year ago. There's an occasional hum in the right chanel I get
every so often but was just sent a fix for it a couple days ago. As
the humm is not there I haven't done the fix. (the hypothesis is a
potentiometer needs
Hi,
When I use Logic 8 there is a nice feature where there is a DX Spot
log. This reflects on the air spots and evaluates my database to let
me know what is posted that I need on which band for which award.
When I click on a call, the K3 automatically goes to what band and
mode was posted and
made a brief attempt
to
fix this. When his attempt didn't work he gave up on it. That's a shame as
Logic
is otherwise a great logging program.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Mar 17 11:57 , Gary Smith sent:
Hi,
When I use Logic 8
Correct. N1MM has a configuration box to reverse CW sidebands. If N1MM can
do it, so can Logic 8...if the owner wants to support his customers.
73, Bill
My request remains valid.
If not Logic 8, if not the next program XYZ that unexpectedly
engages REV then for those who inadvertently
Hi,
I find the brightness and contrast are much better when looking down
at the radio than straight on when it's elevated on the bail.
Increasing the brightness helps somewhat but when looking down at it
(flat on the table, sans bail) it's much too bright.
Is there some way to adjust the
this.
(I know I could tell you more, but I fear I would only be enabling your
aversion to reading the manual.)
73,
Gary KI4GGX
P.S. See the related portion of the manual immediately below .
_
Gary Smith
Sat Mar 14 09:49:36 EDT 2009
Hi
Interesting question,
QST some years back had a featured article on this. The gist of it as
I recall was an EMP from a nuclear blast 5 miles above land would
destroy all consumer devices utilizing integrated circuits. Only
highly protected devices as might be used by the military would be
A pro Ham Radio article from the Hartford Courant.
http://tinyurl.com/ckylhb
Enjoy
Gary
KA1J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hey hey,
Congratulations! Welcome to the new places.
It's all the same club o'course, just a different room.
Well done,
Gary
KA1J
Hello fellow Elecrafters,
Sorry for the OT post here guys, but I just wanted to share with you that I
passed my element 4 exam today with flying colors.
Lyle Dave,
Thank you so much for your explanations.
I realize all the efforts I have put in towards my 150 meter radial
field had to work in my favor. I am on the ocean and my back yard is
a salt water marsh. I use the first tall tree at the marsh's edge as
the support for my 160 meter
Is this not the same thing as the automated Configure Transmitter
Gain in the Elecraft Utility?
Gary
KA1J
FWIW, it's on pg 46 in my original Rev C1 (11/18/07) manual, so it's been
around
for quite a while.
??? Calibration Procedures on page 48 of the Rev D1 Manual has Wattmeter
Cal
assuming a k3 and it is fully loaded;
If I want to operate at say, 1 watt I believe all I have to do is
adjust the power out and it will go from 100mw to 120W using the main
antenna 1 or 2.
If that is true, how does one select and use less that that?
If one uses the BNC out on the
Just running 100W on 1.812 MHz 14.2V at the K3 drew around 17-18A
from my Astron.
3.525 MHz draws the same
25-30 amps isn't right.
Wish I could be of more help.
Gary
KA1J
My K3 is shutting off on high power. CW and SSB. It seems to be drawing too
many amps and I am checking this on an
Although my contesting this past weekend was severely interrupted by
a non-K3 related hardware failure, over the course of the contest I
did use the K3 throughout all day and night segments on various
bands.
I did not call CQ except for a very little bit and the majority was
SP on all bands
Turns out I'm pretty much a bottom feeder and I am using the rig with
150Hz and narrower filtering on CW 99% of the time except when on a
voice mode. I'm not using the 1Khz 8 pole filters so they're excess
to my needs.
$230 for the two, or $118 for one. shipping is included
I bought these in
I am using the Kenwood 850 @ 4800 baud, 1 stop bit and Icom address
1E
When I click on a spot in the spot log, it takes me to the frequency
posted on the cluster and it also logs the contact. If I do not make
the contact I need to erase the qso. Double clicking on a new
station/frequ8ency it
I had a TR-7 that was pre-warc. The optional Aux-7 board had IC's to
populate to allow you to Rx/Tx on a band of your choice. Remove
specific pins on the IC and a broad range of frequencies would be
opened. The Aux-7 and the ICs were very expensive from Drake so there
came a mod that required
4) It looks right. (Don't laugh. A lot of expensive stuff is purchased
because it looks right regardless of performance - or lack thereof:
everything from homes, cars, boats and aircraft to Ham rigs.)
Spouse.
cough...
Gary
KA1J
At a Bluegras Festival in Massachusetts...
I've been wondering if there is a setting I might have missed which
tells the KAT3 to seek a better SWR as I change bands or go to
different areas of a given band.
I always have to tap the ATU-Tune button to have it adjust for a
given location I am on, is there any setting I've missed to have
I have an interesting thing to figure out...
I have a K3 and my amp is a TenTec Titan 425.
I was CQing DX on 160 CW today using semi break-in and a fellow came
by and said I was generating key clicks. He came back and asked me to
QSY to SSB and I looked for him but didn't find him.
I went up
...@carolina.rr.com
- Original Message -
From: Gary Smith g...@doctorgary.net
To: Elecraft@mailman.qth.net
Sent: Wednesday, February 04, 2009 9:00 PM
Subject: [Elecraft] Key Clicks? Maybe, Maybe not.
I have an interesting thing to figure out...
I have a K3 and my amp
While the 8 pole filters have a 'nominal offset' of zero, you may find
that to be perfect for diversity reception that you should find the
absolute offset difference between the 2 filters of the same width and
use half the difference as the offset. With the 8 pole filters, any
offset
I used the included power cable and did notice a drop in the voltage
of about a volt. I had bought a 35 amp, 25 amp continuous Astron
power supply which has variable voltage but does not include a remote
probe as the one I made from the ARRL handbook offered. The probe was
used to ID voltage
of the remote sense for your Astron. Can you send me a
reference for the article in the Handbook? I just looked through the
2008 Hanbook in the power supply section and did not
see same.
73 and thank you,
Jack, W3TMZ
- Original Message -
From: Gary Smith g
I have read the comments on the QRPNEW review and while I support
someone's right to disagree with what I find true, I believe in
accountability. That anonymous postings on a review site I use to
gather information prior to purchasing is allowed to occur is most
disturbing and cheapens the
401 - 500 of 561 matches
Mail list logo
